Responsabilidade social empresarial: o caso de uma indústria alimentícia no estado do Pará

The theme of corporate social responsibility (CSR) provides discussion and analysis and relatively recent, particularly in the last twenty years, has grown into the world as well as in Brazil, the interest on the involvement of the business sector in social activities or projects facing combating poverty. However, a lack of socialization of successful experiences in the practice of CSR and clarity and consensus concepts generate deviations of understanding on the subject and the structuring of interventions. This research aimed to reveal how corporate social responsibility of the IMA Food was developed from Project Nursery Saci. The research took place under a qualitative approach of descriptive-explanatory, conducted through semi-structured interviews and non-participatory observation and interviewed 35 people in total. The interpretation and analysis of data occurred through a categorical content analysis, having as theoretical approach to socioeconomic CSR. The results showed that the major form of social responsibility of the Food IMA is based on a classical approach of CSR, focusing on philanthropy. The absence of a more systematic management of the project and reflect the fragility, instability and lack of commitment towards the community. The contributions generated by the project are substantial and important, but do not reach the development occasioned by the company. However, none of this invalidates the initiative of the organization's commitment to the community, however, requires a reassessment and restructuring of the proposal in a way that leverages the performance of the project and the company itself and it can more effectively contribute to society

Apoio governamental à inovação Tecnológica: análise da indústria farmacêutica paraense

The transformations economical, cultural and social that happen in world ambit they are associated to the intense progress and expansion of new technologies, forcing governments, people, companies and nations to the introduction of new patterns of behavior, forcing, in that way, to the continuous renewal of products and technological processes to maintain the competitiveness, so much among nations, as in the managerial world. In that matter, the technological innovation is recognized as basic factor of maintainable economical competitiveness, being the responsible for the breaking and/or improvement of the techniques and production processes, what presupposes the systematization varied institutional arrangements that they involve firms, interaction nets among companies, government agencies, universities, research institutes, laboratories of companies and scientists and engineers activities. Those arrangements, to the if they articulate with the educational system, with the industrial and managerial section and, also, with the financial institutions, they take the form that Freeman (1987) it coined of national system of innovation, promoted through public politics of CT&I, which seek to induce and to support innovative initiatives in the companies, as well as to establish demands and to prioritize vocations and regional potentialities. In that context of government support to the technological innovation interferes this study, that it looked for to know the reasons of the fragility innovative in the pharmaceutical industry of State of Pará in Brazil, pointed for PINTEC (2005), starting from the point of view of the businessmen of that section. For such, the qualitative approach was used - with interviews directing semi and the technique of the content analysis. The results of the research pointed that the fragilities innovative of the section links to the ignorance of the government support to the technological innovation on the part of the businessmen of the pharmaceutical industry of State of Pará in Brazil

Motivação e satisfação à luz do modelo ASH: estudo de caso em indústria de alimentos

Neste estudo, foram examinadas as relações existentes entre a motivação e a satisfação do trabalhador no espaço laboral. O estudo empírico foi conduzido em uma única etapa, por meio da qual buscou-se conhecer as dimensões latentes identificadas e, a partir das dimensões validadas, buscou-se estabelecer relações com características motivacionais, como antecedentes, e satisfação pelo trabalho realizado, como conseqüência do atendimento das necessidades manifestadas pelo trabalhador. Foram entrevistados 38 (trinta e oito) funcionários da empresa Água Mineral Cristalina, incluindo-se os que ocupam cargos de chefia. Como instrumento de coleta de dados, foi utilizada parte do complexo da Auditoria do Sistema Humano ASH, criado por Quijano (1999), que se trata de um modelo de pesquisa na área de Psicologia Social, incluindo a Administração de Recursos Humanos, que analisa os processos psicológicos e psicossociais nas organizações. Para esta pesquisa, foram utilizados dois formulários sugeridos pelo autor citado, (anexos 01 e 02). O primeiro denomina-se condições para a motivação , com 15 (quinze) questões do tipo likert. O segundo, "trabalho bem feito e satisfação de necessidades", tem 22 (vinte e duas) questões, também do tipo likert. O instrumento foi respondido por colaboradores, independente da posição hierárquica, em aproximadamente 10 (dez) a 15 (quinze) minutos. A aplicação foi realizada diretamente pelo pesquisador nas unidades de produção e de administração da empresa. Por meio de modelagem de equações estruturais, foi estabelecido um modelo de relações causais entre as dimensões latentes relacionadas à motivação e o desempenho do empregado quando tem satisfeitas as suas necessidades. Quanto ao tratamento dos dados, este ocorreu de forma quantitativa. Quanto à análise, aconteceu após os dados terem sido tratados. Nesta pesquisa, os dados foram analisados por meio de estatísticas descritivas, atualizando-se os recursos de softwares específicos como Statistic ou SPSS Statistic Package for Social Sciences. Usou-se a técnica de Análise de Regressão, na qual foi utilizado o método STEPWISE que inclui na equação de explicação de uma variável dependente somente aquelas que auxiliam ou incrementam sua explicação. Como variáveis dependentes, foram utilizadas as variáveis do formulário "trabalho bem feito e satisfação de necessidades" e como variável independe as variáveis do questionário "condições para motivação". Sob o ponto de vista prático, este estudo mostrou que um determinado conjunto de características motivacionais influi positivamente na satisfação do trabalhador, que poderá realizar um trabalho bem feito; do lado teórico, a pesquisa verificou explicitamente a hipótese de que os aspectos motivacionais contribuem para que o empregado, sentindo-se satisfeito, desempenhe melhor as atribuições que lhe são conferidas

O metal na arquitetura contemporânea paraibana 1990-2002

This essay studies about contemporary architecture in João Pessoa, capital city of Paraiba State, which analyzes the utilization of steel and aluminum materials from 1990 to 2002, period when significant increase of this utilization is seen. As references, the architectural analysis and Engel structures definitions were used to analyze 40 built buildings, universe researched, to bring together subsidies to comprehend the contemporary production, especially which use the metal as structural and esthetic-formal element

A ideologia da encenação: uma análise dos aspectos cênico/ideológicos da encenação produzida pela indústria cultural

The research that led to this dissertation adopted a set of scenic/ideological aspects inherent to the productions of the Culture Industry as its object of research. The intellectual output of Theodor W. Adorno and Max Horkheimer underscored the approaches on this subject, since it provides the same set of scenic/ideological features to be explored because, according to the authors, scenes produced by the culture industry are linked to the dominant ideology, since they act in favor of maintaining the status quo. The first objective was the definition this set of features inherent to the scene produced by the culture industry, through the exploration of literature produced by Adorno and Horkheimer, so it was possible to define a set composed of nine elements: Construction of characters as characteristic types; Stereotypes; Naturalization of Stereotyped language; Simplistic playwriting; Reuse dramatic formula; Love and sexuality as themes of plots; Utilization of tragic element; Objetive representation; Approximation of fiction and reality. The second goal was the analysis of scene produced by the culture industry nowadays, so that it was possible to verify if any scenic/ideological aspects indicated by Adorno and Horkheimer in the mid-twentieth century were present among the productions from this beginning of the twenty-first century. Through the analysis of three soap operas produced in Brazil in 2012, it was found that the nine scenic/ideological aspects as indicated by Adorno and Horkheimer appeared in the observed productions. Additionally, a new scenic/ideological feature, not indicated by Adorno and Horkheimer is present: the merchandising

Potencialidades de cultivo de macroalgas no litoral do Rio Grande do Norte (NE, Brasil): uma perspectiva de integração de dados ambientais em sistemas de informação geográfica (SIG)

Since centuries ago, the Asians use seaweed as an important source of feeding and are their greatest world-wide consumers. The migration of these peoples for other countries, made the demand for seaweed to increase. This increasing demand prompted an industry with annual values of around US$ 6 billion. The algal biomass used for the industry is collected in natural reservoirs or cultivated. The market necessity for products of the seaweed base promotes an unsustainable exploration of the natural banks, compromising its associated biological balance. In this context, seaweed culture appears as a viable alternative to prevent the depletion of these natural supplies. Geographic Information Systems (GIS) provide space and produce information that can facilitate the evaluation of important physical and socio-economic characteristics for the planning of seaweed culture. This objective of this study is to identify potential coastal areas for seaweed culture in the state of Rio Grande do Norte, from the integration of social-environmental data in the SIG. In order to achieve this objective, a geo-referred database composed of geographical maps, nautical maps and orbital digital images was assembled; and a bank of attributes including physical and oceanographical variables (winds, chains, bathymetry, operational distance from the culture) and social and environmental factors (main income, experience with seaweed harvesting, demographic density, proximity of the sheltered coast and distance of the banks) was produced. In the modeling of the data, the integration of the space database with the bank of attributes for the attainment of the map of potentiality of seaweed culture was carried out. Of a total of 2,011 ha analyzed by the GIS for the culture of seaweed, around 34% or 682 ha were indicated as high potential, 55% or 1,101 ha as medium potential, and 11% or 228 ha as low potential. The good indices of potentiality obtained in the localities studied demonstrate that there are adequate conditions for the installation of seaweed culture in the state of Rio Grande do Norte

Análise metagenômica da microbiota de ambientes aquáticos do estado do Rio Grande do Norte - Brasil

The screening for genes in metagenomic libraries from soil creates opportunities to explore the enormous genetic and metabolic diversity of microorganisms. Rivers are ecosystems with high biological diversity, but few were examined using the metagenomic approach. With this objective, a metagenomic library was constructed from DNA soil samples collected at three different points along the Jundiaí-river (Rio Grande do Norte-Brazil). The points sampled are from open area, rough terrain and with the direct incidence of sunlight. This library was analyzed functionally and based in sequence. For functional analysis Luria-Bertani solid medium (LB) with NaCl concentration varied from 0.17M to 0.85M was used for functional analysis. Positives clones resistant to hypersaline medium were obtained. The recombinant DNAs were extracted and transformed into Escherichia coli strain DH10B and survival curves were obtained for quantification of abiotic stress resistance. The sequences of clones were obtained and submitted to the BLASTX tool. Some clones were found to hypothetical proteins of microorganisms from both Archaea and Bacteria division. One of the clones showed a complete ORF with high similarity to glucose-6-phosphate isomerase which participates in the synthesis of glycerol pathway and serves as a compatible solute to balance the osmotic pressure inside and outside of cells. Subsequently, in order to identify genes encoding osmolytes or enzymes related halotolerance, environmental DNA samples from the river soil, from the water column of the estuary and ocean were collected and pyrosequenced. Sequences of osmolytes and enzymes of different microorganisms were obtained from the UniProt and used as RefSeqs for homology identification (TBLASTN) in metagenomic databases. The sequences were submitted to HMMER for the functional domains identification. Some enzymes were identified: alpha-trehalose-phosphate synthase, L-ectoina synthase (EctC), transaminase L-2 ,4-diaminobutyric acid (EctB), L-2 ,4-diaminobutyric acetyltransferase (EctA), L-threonine 3 dehydrogenase (sorbitol pathway), glycerol-3-phosphate dehydrogenase, inositol 3-phosphate dehydrogenase, chaperones, L-proline, glycine betaine binding ABC transporter, myo-inositol-1-phosphate synthase protein of proline simportadora / PutP sodium-and trehalose-6-phosphate phosphatase These proteins are commonly related to saline environments, however the identification of them in river environment is justified by the high salt concentration in the soil during prolonged dry seasons this river. Regarding the richness of the microbiota the river substrate has an abundance of halobacteria similar to the sea and more than the estuary. These data confirm the existence of a specialized response against salt stress by microorganisms in the environment of the Jundiaí river

Influência do teor de calcário no comportamento físico, mecânico e microestrutural de cerâmicas estruturais

There are ores of clay in Piauí State that are used for red structural ceramics, which are naturally contaminated with calcareous vein. This is one thing that impedes its exploration in an adequate way, especially for tile production. The present work aims at verifying the influence of the calcareous contents in the technological structural ceramics area, seeking to determine a maximum permissible calcareous proportion/contents in the ceramic mass using the patterns of the local industry production. For the consecution of this paper, it was characterized the clay and calcareous material by FRX, DRX, TGA and DTA. It was also configurated by extrusion and burnt in the temperatures of 850°C, 900°C, 950°C and 1000°C pieces of the corpus with 0, 5, 10, 15 e 20% of calcareous proportion. After that, it was carried out technological samples of linear retraction, water absortion, apparent porosity, specific apparent mass and mechanic resistance. The results showed the possibility of using calcareous in the ceramic mass and in some cases the technological properties got better

Desenvolvimento de cerâmica vermelha utilizando rejeitos da construção civil

The Industry of the Civil Construction has been one of the sectors that most contribute to the pollution of the environment, due to the great amount of residues generated by the construction, demolition and the extraction of raw material. As a way of minimizing the environmental impacts generated by this industry, some governmental organizations have elaborated laws and measures about the disposal of residues from the building construction (CONAMA - resolution 307). This work has as objective the reutilization of residues compound of sand, concrete, cement, red bricks and blocks of cement and mortar for the production of red ceramic, with the objective of minimizing costs and environmental impacts. The investigated samples contained 0% to 50% of residues in weight, and they were sintered at temperatures of 950°C, 1000°C, 1050°C, 1100°C and 1150°C. After the sinterization, the samples were submitted to tests of absorption of water, linear retraction, resistance to bending, apparent porosity, specific density, XRD and SEM. Satisfactory results were obtained in all studied compositions, with the possible incorporation of up to 50% of residues in ceramic mass without great losses in the mechanical strength, giving better results to the incorporation of 30% of residues in the fabrication of ceramic parts, such as roofing tiles, bricks masonry and pierced bricks

Avaliação da conformidade de blocos cerâmicos para alvenaria de vedação produzidas na Região Integrada de Desenvolvimento da Grande Teresina

This research presents an outlook of the industries of red ceramic in the region next to the city of Teresina and an analysis of the ceramic products producted in this pole. The microregion investigated possesses 13 boroughs where were identified 32 ceramic in operation, being that 24 are located in Teresina, the ceramic region more important of Piauí, 1 is located in the city of Miguel Leão and 7 is located in Timon city that belongs to the state of Maranhão. The majority of ceramics are pulverized in these two cities, Teresina and Timon , responsible by a largely production independent of distance between fabric and consumer market. Furthermore, there is an artisanal production realized in other boroughs, mainly manual conformation bricks, where are producted diverse types of handicraft and ceramics utilitarian. The objective of this research is to evalue the conformity of ceramic blocks for brick of obstruction made by red ceramic industry of microregion at studying, verifying their pontentialities and adequacy in terms of production. In this research universe made a search of ceramic industries related to the Foundation CEPRO (Foundation Center of Research Social and Economic of Piauí). For the analysis of the ceramic products , were colected 60 crude bricks sample in three industries for their characterization, and 39 burned bricks sample for the Evaluation of Conformity. The results of the characterization made reached a accetptable standard in all formulations and temperature studied. The burned samples were applied to the geometric, physical and mechanical assays according to the ABNT standards (Brazilian Association of Technical Standards). The results of the physical assays showed that all the samples are at the same band recommended by standard. However, through the geometric assays just two industries did not present results according to the standard, due to lack of control in their process such as in their equipments. Taking into account the mechanical properties, only one industry investigated was not according to the standard

Análise de falhas em martelos oscilantes dos desfibradores da indústria sucroalcooleira da Região Norte-Nordeste

The failure of materials is always an unwelcome event for several reasons: human lives are put in danger, economic losses, and interference in the availability of products and services. Although the causes of failures and behaviour of materials can be known, the prevention of such a condition is difficult to be guaranteed. Among the failures, wear abrasion by the low voltage is the kind of failure that occurs in more equipment and parts industry. The Plants Sucroalcooleiras suffer significant losses because of such attrition, this fact that motivated their choice for the development of this work. For both, were considered failures in the swing hammers desfibradores stopped soon after the exchange provided in accordance with tonnage of cane processed, then were analyzed by the level of wear testing of rubber wheel defined by the standard ASTM G65-91.The failures were classified as to the origin of the cause and mechanism, moreover, were prepared with samples of welding procedures according to ASME code, sec. IX as well, using the technique of thermal spraying to analyze the performance of these materials produced in laboratories, and compares them with the solder used in the plant. It was observed that the bodies-of-proof prepared by the procedure described as welding, and the thermal spraying the results of losing weight have been minimized significantly compared to the preparations in the plant. This is because the use of techniques more appropriate and more controlled conditions of the parameters of welding. As for the thermal spraying, this technique has presented a satisfactory result, but requires the use of these coatings in the best condition for real affirmation of the results

Estudo da zircônia reforçado com alumina

Ceramics materials have good properties including chemical stability, high hardness and wear resistance. Moreover, due to its fragility, can suffer failure under relatively low levels of tension. Actually zirconia is the material of choice in metal free dental prostheses used in dentistry due its inertia in physiological environment, good bending strength, hardness and fracture toughness. The alumina and mixed tungsten and titanium carbides additions, acting as reinforcement elements in the zirconia matrix, have as their main objective the improvement of mechanical properties of this material. In this work, samples of zirconia, zirconia with 30% wt of alumina and zirconia with 30% wt mixed carbides were analyzed. The samples were sintered by uniaxial hot pressing on 30 MPa pressure, for 1 hour in an argon atmosphere. They were physically characterized by porosity and density measurements, and mechanically by 3-points bending strength and Vickers microhardness. The X-ray diffraction was used for the phase identifications and microstructure was examined by scanning electron microscopy (SEM). The addition of mixed carbides as reinforcement elements in zirconia matrix provides improvements in all properties analyzed in this work. The alumina addition has dropped the zirconia strength, although it caused improvement in other properties

Análise de propriedades térmicas e mecânicas de compósitos de argamassa e resíduo de borracha

Although already to exist alternative technique and economically viable for destination of used tires, quantitative data on properties of constructive elements that use the rubber waste as aggregate still are restricted. In the present work, the waste proceeding from industry of retreading as material for manufacture of composite destined to the production of constructive elements was considered. Mechanical and thermal properties of mortar had been analyzed Portland cement with addition of waste without treatment, in the ratios of 10%, 20% and 30% in mass in relation to the mass of the cement, substituting the aggregate in the trace in mortar 1:5 mass cement and sand. The size of the used residue varied between 0,30mm and 4,8mm (passing in the bolter 4,8mm and being restrained in the one of 0,30mm), being it in the formats fibers and granular. The influences of the size and the percentage of residue added to the mortar (in substitution to the aggregate) in the thermal and mechanical properties had been considered. Assays of body-of-test in thestates had been become fullfilled cool (consistency index) and hardened (absorption of water for capillarity, strength the compression, traction and strength flexural). The work is centralized in the problem of the relation thermal performance /strength mechanics of used constructive systems in regions of low latitudes (Been of the Piauí), characterized for raised indices of solar radiation.

Sinterização de aço inoxidável reforçado com partículas nanométricas dispersas de carbeto de nióbio - NbC

Metal powder sintering appears to be promising option to achieve new physical and mechanical properties combining raw material with new processing improvements. It interest over many years and continue to gain wide industrial application. Stainless steel is a widely accepted material because high corrosion resistance. However stainless steels have poor sinterability and poor wear resistance due to their low hardness. Metal matrix composite (MMC) combining soft metallic matrix reinforced with carbides or oxides has attracted considerable attention for researchers to improve density and hardness in the bulk material. This thesis focuses on processing 316L stainless steel by addition of 3% wt niobium carbide to control grain growth and improve densification and hardness. The starting powder were water atomized stainless steel manufactured for Höganäs (D 50 = 95.0 μm) and NbC produced in the UFRN and supplied by Aesar Alpha Johnson Matthey Company with medium crystallite size 16.39 nm and 80.35 nm respectively. Samples with addition up to 3% of each NbC were mixed and mechanically milled by 3 routes. The route1 (R1) milled in planetary by 2 hours. The routes 2 (R2) and 3 (R3) milled in a conventional mill by 24 and 48 hours. Each milled samples and pure sample were cold compacted uniaxially in a cylindrical steel die (Ø 5 .0 mm) at 700 MPa, carried out in a vacuum furnace, heated at 1290°C, heating rate 20°C stand by 30 and 60 minutes. The samples containing NbC present higher densities and hardness than those without reinforcement. The results show that nanosized NbC particles precipitate on grain boundary. Thus, promote densification eliminating pores, control grain growth and increase the hardness values

Síntese e caracterização de espinélios a base de Cu, Fe e Cr para pigmentos cerâmicos

Inorganic pigment comprises a host lattice, which is part of the chromophore component (usually a transition metal cation) and possible components modifiers, which stabilize, add or restate the properties pigments. Among the materials with spinel, ferrites, and the chromite stand out, because they have broad technological importance in the area of materials, applicability, pigments, catalytic hydrogenation, thin film, ceramic tiles, among others. The present work, pigments containing CuFe2O4, CuCr2O4,e CuFeCrO4, were synthesized by a method that makes use of gelatin as organic precursor using their application to ceramic pigments. The pigments were characterized by X-ray diffraction (XRD), Infrared spectroscopy, scanning electron microscopy (SEM) spectroscopy in the UV-visible and Colorimetry. The results confirmed the feasibility of the synthetic route used, with respect to powders synthesized, there is the formation of spinel phase from 500°C, with an increase in crystallinity and the formation of other phases. The pigments were shown to be crystalline and the desired phases were obtained. The copper chromite have hues ranging from green to black according to the calcination temperature, while the copper chromite doped with iron had brownish. The ferrites showed copper color and darker brown to black, which may indicate an interesting factor because of the importance of black pigment