Using a social networking site such as Facebook, to enhance the feeling of belonging, within a first year nursing cohort of a large university

Recently I asked a first year student how he was coping with the transition from high school to university. The young fellow looked at me and said, “Man, everything is so different!” I smiled and said “like what?” with which he seriously replied, “Well for one thing, no one tells you that you have to wear a hat at lunch time.” I have to admit I was a little amused and surprised by this student’s response, as so often the focus, is placed on getting first year students to engage academically, when it is obvious at times, that even the mere transition in to university life and the culture itself, can be a hurdle. While teaching, within a large first year unit for over 10 years, it has become apparent that students want more connection with not only the peers that they study with, but also with the University as a whole. Dr Krause pointed out in her keynote paper, On Being Strategic about the First Year (2006), that this “sense of belonging is conducive to enhancing engagement, satisfaction with learning and commitment to study”. It has also become evident, that the way in which students want to be able to communicate has changed, with the advent of capabilities such as Instant Messaging via a network and Short Message Service SMS texting via their hand held mobile phones. To be able to chat and feel connected on social networking sites such as Bebo, Facebook and Twitter is not only a way of the future, it is here now and it is here to stay.

A survey of the use of grading scales for contact lens complications in optometric practice

Purpose:  The aim of this study was to investigate the extent and pattern of use of grading scales for contact lens complications (‘grading scales’) in optometric practice. Methods:  An anonymous postal survey was sent to all 756 members of the Queensland Division of Optometrists Association Australia. Information was elicited relating to level of experience, practice type and location, and mode of usage of grading scales. Results:  Survey forms were returned by 237 optometrists, representing a 31 per cent response rate. The majority of respondents (61 per cent) reported using grading scales frequently in practice, while 65 per cent of these preferred to use the Efron Grading Scales for Contact Lens Complications. Seventy-six per cent of optometrists use a method of incremental grading rather than simply grading with whole numbers. Grading scales are more likely to be used by optometrists who have recently graduated (p < 0.001), have a postgraduate certificate in ocular therapeutics (p = 0.018), see more contact lens patients (p = 0.027) and use other forms of grading scales (p < 0.001). The most frequently graded ocular conditions were corneal staining, papillary conjunctivitis and conjunctival redness. The main reasons for not using grading scales included a preference for sketches, photographs or descriptions (87 per cent) and unavailability of scales (29 per cent). Conclusion:  Grading scales for contact lens complications are used extensively in optometric practice for a variety of purposes. This tool can now be considered as an expected norm in contact lens practice. We advocate the incorporation of such grading scales into professional guidelines and standards for good optometric clinical practice.

Preferences of first-time expectant mothers for care of their child : 'I wouldn't leave them somewhere that made me feel insecure'

Australia has witnessed a continual increase in maternal employment over the past two decades, which places focus on both supply of childcare and a demand for high quality care. This study examined childcare preferences regarding the return to paid work of 124 Australian women who were expecting their first child. In contrast with most studies that have retrospective designs, the design of this study presents the perspectives of women prior to the birth of their first child-that is, before they have made a final decision about child care. This study found that the majority (78 per cent) of the women intended to re-commence work within the 12 months after the birth of their child. There were two factors that were the most salient features in their decision making-the quality of care and the personal satisfaction of engaging in paid work. The findings suggest that family friendly employment practices and access to secure, high-quality child care are key to women's secure participation in the paid workforce.

Use of 3D visualisation to enhance groundwater stable isotope data and its interpretation, Lockyer Valley, southeast Queensland

The use of stable isotope ratios δ18O and δ2H are well established in assessment of groundwater systems and their hydrology. The conventional approach is based on x/y plots and relation to various MWL’s, and plots of either ratio against parameters such as Clor EC. An extension of interpretation is the use of 2D maps and contour plots, and 2D hydrogeological vertical sections. An enhancement of presentation and interpretation is the production of “isoscapes”, usually as 2.5D surface projections. We have applied groundwater isotopic data to a 3D visualisation, using the alluvial aquifer system of the Lockyer Valley. The 3D framework is produced in GVS (Groundwater Visualisation System). This format enables enhanced presentation by displaying the spatial relationships and allowing interpolation between “data points” i.e. borehole screened zones where groundwater enters. The relative variations in the δ18O and δ2H values are similar in these ambient temperature systems. However, δ2H better reflects hydrological processes, whereas δ18O also reflects aquifer/groundwater exchange reactions. The 3D model has the advantage that it displays borehole relations to spatial features, enabling isotopic ratios and their values to be associated with, for example, bedrock groundwater mixing, interaction between aquifers, relation to stream recharge, and to near-surface and return irrigation water evaporation. Some specific features are also shown, such as zones of leakage of deeper groundwater (in this case with a GAB signature). Variations in source of recharging water at a catchment scale can be displayed. Interpolation between bores is not always possible depending on numbers and spacing, and by elongate configuration of the alluvium. In these cases, the visualisation uses discs around the screens that can be manually expanded to test extent or intersections. Separate displays are used for each of δ18O and δ2H and colour coding for isotope values.

Assessment of pre- and post-flood groundwater recharge via 3D visualisation, Lockyer Valley, southeast Queensland

The Lockyer Valley in southeast Queensland supports important and intensive irrigation which is dependant on the quality and availability of groundwater. Prolonged drought conditions from ~1997 resulted in a depletion of the alluvial aquifers, and concern for the long-term sustainability of this resource. By 2008, many areas of the valley were at < 20% of storage. Some relief occurred with rain events in early 2009, then in December 2010 - January 2011, most of southeast Queensland experienced unprecedented flooding. These storm-based events have caused a shift in research focus from investigations of drought conditions and mitigation to flood response analysis. For the alluvial aquifer system of the valley, a preliminary assessment of groundwater observation bore data, prior to and during the flood, indicates that there is a spatially variable aquifer response. While water levels in some bores screened in unconfined shallow aquifers have recovered by more than 10 m within a short period of time (months), others show only a small or moderate response. Measurements of pre- and post-flood groundwater levels and high-resolution time-series records from data loggers are considered within the framework of a 3D geological model of the Lockyer Valley using Groundwater Visualisation System(GVS). Groundwater level fluctuations covering both drought and flood periods are used to estimate groundwater recharge using the water table fluctuation method (WTF), supplemented by estimates derived using chloride mass balance. The presentation of hydraulic and recharge information in a 3D format has considerable advantages over the traditional 2D presentation of data. The 3D approach allows the distillation of multiple types of information(topography, geological, hydraulic and spatial) into one representation that provides valuable insights into the major controls of groundwater flow and recharge. The influence of aquifer lithology on the spatial variability of groundwater recharge is also demonstrated.

From Greek temple to bird's nest : mapping, assessing and understanding national integrity systems

In this paper, I would like to outline the approach we have taken to mapping and assessing integrity systems and how this has led us to see integrity systems in a new light. Indeed, it has led us to a new visual metaphor for integrity systems – a bird’s nest rather than a Greek temple. This was the result of a pair of major research projects completed in partnership with Transparency International (TI). One worked on refining and extending the measurement of corruption. This, the second, looked at what was then the emerging institutional means for reducing corruption – ‘national integrity systems’

Heidegger's hippies : a dissenting voice on "the problem of the subject"

This is a deliberately contentious paper about the future of the socio-political sphere in the West based on what we know about its past. I argue that the predominant public discourse in Western countries is best characterised as one of selective forgetfulness; a semi-blissful, amnesiacal state of collective dementia that manifests itself in symbolic idealism: informationalism. Informationalism is merely the latest form of idealism. It is a lot like religion insofar as it causally relates abstract concepts with reality and, consequently, becomes confused between the two. Historically, this has proven to be a dangerous state of affairs, especially when elites becomes confused between ideas about how a society should work, and the way it actually does work. Central to the idealism of the information age, at least in intellectual spheres, is the so called "problem of the subject". I argue that the "problem of the subject" is a largely synthetic, destabilising, and ultimately fruitless theoretical abstraction which turns on a synthetically derived, generalised intradiscursive space; existentialist nihilism; and the theoretical baubles of ontological metaphysics. These philosophical aberrations are, in turn, historically concomitant with especially destructive political and social configurations. This paper sketches a theoretical framework for identity formation which rejects the problem of the subject, and proposes potential resources, sources, and strategies with which to engage the idealism that underpins this obfuscating problematic in an age of turbulent social uncertainty. Quite simply, I turn to history as the source of human identity. While informationalism, like religion, is mostly focused on utopian futures, I assert that history, not the future, holds the solutions for substantive problematics concerning individual and social identities. I argue here that history, language, thought, and identity are indissolubly entangled and so should be understood as such: they are the fundamental parts of 'identities in action'. From this perspective, the ‘problem of the subject’ becomes less a substantive intellectual problematic and more a theoretical red herring.

An analysis of the nature and effectiveness of corporate governance in smaller listed Australian companies

The objective of this thesis is to investigate the corporate governance attributes of smaller listed Australian firms. This study is motivated by evidence that these firms are associated with more regulatory concerns, the introduction of ASX Corporate Governance Recommendations in 2004, and a paucity of research to guide regulators and stakeholders of smaller firms. While there is an extensive body of literature examining the effectiveness of corporate governance, the literature principally focuses on larger companies, resulting in a deficiency in the understanding of the nature and effectiveness of corporate governance in smaller firms. Based on a review of agency theory literature, a theoretical model is developed that posits that agency costs are mitigated by internal governance mechanisms and transparency. The model includes external governance factors but in many smaller firms these factors are potentially absent, increasing the reliance on the internal governance mechanisms of the firm. Based on the model, the observed greater regulatory intervention in smaller companies may be due to sub-optimal internal governance practices. Accordingly, this study addresses four broad research questions (RQs). First, what is the extent and nature of the ASX Recommendations that have been adopted by smaller firms (RQ1)? Second, what firm characteristics explain differences in the recommendations adopted by smaller listed firms (RQ2), and third, what firm characteristics explain changes in the governance of smaller firms over time (RQ3)? Fourth, how effective are the corporate governance attributes of smaller firms (RQ4)? Six hypotheses are developed to address the RQs. The first two hypotheses explore the extent and nature of corporate governance, while the remaining hypotheses evaluate its effectiveness. A time-series, cross-sectional approach is used to evaluate the effectiveness of governance. Three models, based on individual governance attributes, an index of six items derived from the literature, and an index based on the full list of ASX Recommendations, are developed and tested using a sample of 298 smaller firms with annual observations over a five-year period (2002-2006) before and after the introduction of the ASX Recommendations in 2004. With respect to (RQ1) the results reveal that the overall adoption of the recommendations increased from 66 per cent in 2004 to 74 per cent in 2006. Interestingly, the adoption rate for recommendations regarding the structure of the board and formation of committees is significantly lower than the rates for other categories of recommendations. With respect to (RQ2) the results reveal that variations in rates of adoption are explained by key firm differences including, firm size, profitability, board size, audit quality, and ownership dispersion, while the results for (RQ3) were inconclusive. With respect to (RQ4), the results provide support for the association between better governance and superior accounting-based performance. In particular, the results highlight the importance of the independence of both the board and audit committee chairs, and of greater accounting-based expertise on the audit committee. In contrast, while there is little evidence that a majority independent board is associated with superior outcomes, there is evidence linking board independence with adverse audit opinion outcomes. These results suggest that board and chair independence are substitutes; in the presence of an independent chair a majority independent board may be an unnecessary and costly investment for smaller firms. The findings make several important contributions. First, the findings contribute to the literature by providing evidence on the extent, nature and effectiveness of governance in smaller firms. The findings also contribute to the policy debate regarding future development of Australia’s corporate governance code. The findings regarding board and chair independence, and audit committee characteristics, suggest that policy-makers could consider providing additional guidance for smaller companies. In general, the findings offer support for the “if not, why not?” approach of the ASX, rather than a prescriptive rules-based approach.

Towards a service framework for remote sales support via augmented reality

Real-time sales assistant service is a problematic component of remote delivery of sales support for customers. Solutions involving web pages, telephony and video support prove problematic when seeking to remotely guide customers in their sales processes, especially with transactions revolving around physically complex artefacts. This process involves a number of services that are often complex in nature, ranging from physical compatibility and configuration factors, to availability and credit services. We propose the application of a combination of virtual worlds and augmented reality to create synthetic environments suitable for remote sales of physical artefacts, right in the home of the purchaser. A high level description of the service structure involved is shown, along with a use case involving the sale of electronic goods and services within an example augmented reality application. We expect this work to have application in many sales domains involving physical objects needing to be sold over the Internet.

Continuous innovation in SMEs : how design innovation shapes business performance through doing more with less

Firms face the challenge to survive and thrive in an increasingly competitive global market, developing strategies to continuously innovate, often having to do more with less. Increasing awareness of the benefits of stimulating continuous innovation in small and medium enterprises has led to the development and implementation of design innovation programs, with many western countries investing in design innovation programs for better firm performance. This paper investigates how firms respond to a design innovation program and engage in continuous innovation, doing more business with a focused less diverse strategy. Early findings from a study of companies engaged in a design innovation program indicate that applying design principles to all aspects of their business has delivered better business performance and better positioning in global markets.

Cross likelihood ratio based speaker clustering using eigenvoice models

This paper proposes the use of eigenvoice modeling techniques with the Cross Likelihood Ratio (CLR) as a criterion for speaker clustering within a speaker diarization system. The CLR has previously been shown to be a robust decision criterion for speaker clustering using Gaussian Mixture Models. Recently, eigenvoice modeling techniques have become increasingly popular, due to its ability to adequately represent a speaker based on sparse training data, as well as an improved capture of differences in speaker characteristics. This paper hence proposes that it would be beneficial to capitalize on the advantages of eigenvoice modeling in a CLR framework. Results obtained on the 2002 Rich Transcription (RT-02) Evaluation dataset show an improved clustering performance, resulting in a 35.1% relative improvement in the overall Diarization Error Rate (DER) compared to the baseline system.

Least-squares congealing for large numbers of images

In this paper we pursue the task of aligning an ensemble of images in an unsupervised manner. This task has been commonly referred to as “congealing” in literature. A form of congealing, using a least-squares criteria, has been recently demonstrated to have desirable properties over conventional congealing. Least-squares congealing can be viewed as an extension of the Lucas & Kanade (LK)image alignment algorithm. It is well understood that the alignment performance for the LK algorithm, when aligning a single image with another, is theoretically and empirically equivalent for additive and compositional warps. In this paper we: (i) demonstrate that this equivalence does not hold for the extended case of congealing, (ii) characterize the inherent drawbacks associated with least-squares congealing when dealing with large numbers of images, and (iii) propose a novel method for circumventing these limitations through the application of an inverse-compositional strategy that maintains the attractive properties of the original method while being able to handle very large numbers of images.

i-vector based speaker recognition on short utterances

Robust speaker verification on short utterances remains a key consideration when deploying automatic speaker recognition, as many real world applications often have access to only limited duration speech data. This paper explores how the recent technologies focused around total variability modeling behave when training and testing utterance lengths are reduced. Results are presented which provide a comparison of Joint Factor Analysis (JFA) and i-vector based systems including various compensation techniques; Within-Class Covariance Normalization (WCCN), LDA, Scatter Difference Nuisance Attribute Projection (SDNAP) and Gaussian Probabilistic Linear Discriminant Analysis (GPLDA). Speaker verification performance for utterances with as little as 2 sec of data taken from the NIST Speaker Recognition Evaluations are presented to provide a clearer picture of the current performance characteristics of these techniques in short utterance conditions.

Private supervisors of learner drivers and Queensland's graduated driver licensing system : how important are they?

Background: A key element of graduated driver licensing systems is the level of support provided by parents. In mid-2007 changes were made to Queensland’s graduated driver licensing system, including amendments to the learner licence with one of the more significant changes requiring learners to record 100 hours of supervised driving practice in a logbook. Prior to mid-2007, there was no minimum supervision requirement. Aims: The aim of this study was to document the experiences of the supervisors of Queensland learner drivers after the changes made to the graduated driver licensing system in mid-2007. Methods: The sample of 552 supervisors of learner drivers was recruited using a combination of convenience and snowball sampling techniques. The internet survey was open for completion between July 2009 and May 2010 and took approximately 15 to 20 minutes for participants to complete. Results: For 59.7 per cent of the participants, this was the first time that they had supervised a learner driver. For 63.2 per cent, they classified themselves as the main supervisor for the learner driver. Participants provided an average of 79.62 hours of supervision (sd = 92.38), while other private supervisors provided 34.89 hours of supervision (sd = 41.74) to the same learner and professional driving instructors 18.55 hours of supervision (sd = 27.54). The vast majority of supervisors recorded all or most of the practice that they provided their learner driver in their log book with most supervisors indicating that they believed that the hours recorded in the learner’s logbook were either accurate or very accurate. While many supervisors stated that they did not receive any advice regarding the supervision of learner drivers, some had received advice from others such as friends or through discussions with a professional driving instructor. Discussion and conclusions: While graduated driver licensing systems implicitly encourage the involvement of parents and other private supervisors, these people tend not to be systematically involved. As demonstrated in this study, private supervisors provide a significant amount of supervised practice and seek to record this practice accurately and honestly in the learner’s logbook. However, even though a significant number of participants reported that this was the first time that they had supervised a learner driver, they accessed little support or guidance for their role. This suggests a need to more overtly encourage and support the role of private supervisors for learner drivers.

Sky high and back again : the evolution of simulation-based design from aerospace to construction

Emerging from the challenge to reduce energy consumption in buildings is a need for research and development into the more effective use of simulation as a decision-support tool. Despite significant research, persistent limitations in process and software inhibit the integration of energy simulation in early architectural design. This paper presents a green star case study to highlight the obstacles commonly encountered with current integration strategies. It then examines simulation-based design in the aerospace industry, which has overcome similar limitations. Finally, it proposes a design system based on this contrasting approach, coupling parametric modelling and energy simulation software for rapid and iterative performance assessment of early design options.