958 resultados para HIGH CLAY CONTENT
Resumo:
Pós-graduação em Engenharia Elétrica - FEB
Resumo:
The Culture of crambe became promising since its grains presents high oil content. The methods of drying may influence the quality of crude oil extracted from the beans, depending on the way it is managed. This study goal was to evaluate the influence of different drying methods on the quality of the crude oil extracted from crambe grain. The experimental design was completely randomized with five treatments (drying with heated air, natural air, yard, shade, and at the field), and with four tests for each. In order to check the quality of the grains, we performed an analysis of fat acidity, and to evaluate the crude oil quality, we conducted analysis of iodine value, acid value, water content, density at 20ºC, and a kinematic viscosity at 40°. After obtaining the data, the results were submitted to analysis of variance. When significant means were detected, they were compared by t-test (p ≤ 0.05). The method of drying with heated air provided a lower rate of fatty acid in grains. The drying methods evaluated did not compromise the quality of the oil extracted from the crambe grain.
Resumo:
Label is every and any information regarding to a product that is transcribed in its package. For the consumer it is through the nutritional information tables contained in the labels that there is access to data such as quantity and percentage of nutrients contained in foods. Through this knowledge, it is possible to make healthier food choices, minimizing the negative effects related to poor nutrition in the population, especially among children, the most critical rate of obesity incidence. The aim of this study was to evaluate the appropriateness of the labels of some foods consumed by children in relation to the Recommended Daily Intake (RDI) and verify that the general aspects of the labels were in accordance with Brazilian regulations. Five products were selected like snacks, corn snacks, snacks, peanut, peanuts, potato snacks and biscuit recipes. The labels of different brands of each snack were analyzed using the Checklist of Labelling, which is based on RDC No. 259 and RDC No. 360. The nutritional adequacy of nutrients from these foods (carbohydrates, protein, total fat, saturated fat, trans fat, dietary fiber and sodium) was evaluated in relation to that recommended by the RDA for children 4-8 years old. There was small percentage of mistakes in the labels of the analyzed foods, about 12%, being the presence of words that induce the consumers to the misunderstanding the irregularity with larger predominance, present in 25% of the labels. Other items in disagreement were the incomplete specification of the addictive ones alimentary in the list of ingredients and the absence of instructions about the conservation of the foods after opening the packings, both with percentile of occurrence of 18,75%. The high sodium content found in the nutritional information of food shows that should reduce the consumption of these products among children.
Resumo:
Ginger is a starchy tubers prized for their chemical components. In the production of any kinds of beverages has been added to the extract of ginger. However, in view of the high starch content, a possibility of further development of the agribusiness sector this would be the hydrolysis tuberous rhizomes disqualified for export in order to obtain hydrolysates that would be used in the preparation of fermented beverages. This work aimed to evaluate the production of sugar from rhizomes of ginger. Two α-amylase enzymes were tested in the stage of liquefaction (Liquozyme Supra (T1) and Termamyl 2X (T2)), as well as the effect of time of action of amyloglucosidase (AMG 300L). The hydrolysates were analyzed in liquid chromatography (HPLC) and was also carried out the mass balance of the processes. The results showed higher hydrolysis of starch in the treatment that used Liquozyme Supra in liquefaction. The action time of 18 hours of AMG 300L hydrolyzate which gave an 98% of its chemical components was glucose.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Geociências e Meio Ambiente - IGCE
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE
Resumo:
Pós-graduação em Ciência dos Materiais - FEIS
Resumo:
Central-place foragers that must return to a breeding site to deliver food to offspring are faced with trade-offs between prey patch quality and distance from the colony. Among colonial animals, pinnipeds and seabirds may have different provisioning strategies, due to differences in their ability to travel and store energy. We compared the foraging areas of lactating Antarctic fur seals and chinstrap penguins breeding at Seal Island, Antarctica, to investigate whether they responded differently to the distribution of their prey (Antarctic krill and myctophid fish) and spatial heterogeneity in their habitat. Dense krill concentrations occurred in the shelf region near the colony. However, only brooding penguins, which are expected to be time-minimizers because they must return frequently with whole food for their chicks, foraged mainly in this proximal shelf region. Lactating fur seals and incubating penguins, which can make longer trips to increase energy gain per trip, and so are expected to be energy-maximizers, foraged in the more distant (>20 km from the island) slope and oceanic regions. The shelf region was characterized by more abundant, but lower-energy-content immature krill, whereas the slope and oceanic regions had less abundant but higher-energy-content gravid krill, as well as high-energy-content myctophids. Furthermore, krill in the shelf region undertook diurnal vertical migration, whereas those in the slope and oceanic regions stayed near the surface throughout the day, which may enhance the capture rate for visual predators. Therefore, we sug- gest that the energy-maximizers foraged in distant, but potentially more profitable feeding regions, while the time-minimizers foraged in closer, but potentially less profitable regions. Thus, time and energy constraints derived from different provisioning strategies may result in sympatric colonial predator species using different foraging areas, and as a result, some central-place foragers use sub- optimal foraging habitats, in terms of the quality or quantity of available prey.
Resumo:
We performed laboratory experiments to investigate the sensitivity of the Spectral Induced Polarization (SIP) method to toluene contamination in clayey soils. We used mixtures of quartzitic sand and montmorillonite as soil samples, artificially contaminated with varying amounts of toluene. Care was taken to quantify the experimental uncertainty resulting from packing since such effects must be quantified if variations in SIP signatures between samples are to be reliably interpreted in terms of the effects of hydrocarbon concentration. The SIP response of all samples following addition of toluene was monitored for a period of 40 days following sample preparation. Stepwise regression was used to examine the statistical significance of correlations between (i) clay content and (ii) toluene concentration and SIP parameters. Both single-frequency real and imaginary conductivity measurements, along with the integral chargeability, normalized chargeability, DC conductivity and time constant obtained from a Debye decomposition fitting, were examined in this regression analysis. The SIP measurements show a clear time dependence following sample preparation, indicating that samples containing toluene may take significant time to reach an equilibrium electrical response. SIP measurements are significantly related to toluene content shortly after sample preparation, when the expected dependence of SIP on clay concentration is apparently suppressed. However, for the state of electrical equilibrium after 40 days (interpreted to indicate surface chemistry at equilibrium) there is no significant relation between SIP measurements and toluene content; instead SIP measurements are then significantly correlated with clay concentration. The total chargeability, normalized chargeability and relaxation time obtained from the Debye decomposition show no correlation with toluene content, indicating that this procedure, which likely integrates over multiple mechanisms, may not be suitable for understanding relationships between SIP and hydrocarbon contamination. We find only small low-frequency polarization signals observed in relation to toluene concentration (2 mrad at 0.01 Hz), which initially decreases the interfacial polarization. Unlike earlier works, our results do not support the use of the SIP method as a tool for monitoring toluene contamination in clay soils.
Resumo:
No presente trabalho, foram comparados dois métodos de extração de cobre (Cu) e zinco (Zn) em solos com teor de matéria orgânica (MO) maior que 50g kg-1. Os métodos de extração comparados foram: Extração com HCl 0,1mol L-1 (método padrão para os estados do Rio Grande do Sul e Santa Catarina) e Mehlich 3. Este trabalho foi realizado no Laboratório de Química e Fertilidade do Solo da Universidade do Estado de Santa Catarina (UDESC), no ano de 2009. As duas metodologias de extração foram aplicadas em 286 amostras de solo provenientes do Laboratório de Análise do Solo da UDESC, todas com mais de 50g kg-1 de MO. Os teores de cobre e zinco nos extratos foram determinados por espectrometria de absorção atômica com chama. Os resultados mostraram que houve correlação significativa entre os métodos, Cu (r=0,80) e Zn (r=0,93). A solução de Mehlich 3 extraiu mais cobre e menos zinco, quando comparada à solução de HCl 0,1mol L-1. O Mehlich 3 demonstrou ser eficiente na extração de cobre e zinco em solos com alto teor de MO, podendo substituir o método atual.
Resumo:
Similar to other photosynthetic microorganisms, the cyanobacterium Arthrospira platensis can be used to produce pigments, single cell proteins, fatty acids (which can be used for bioenergy), food and feed supplements, and biofixation of CO2. Cultivation in a specifically designed tubular photobioreactor is suitable for photosynthetic biomass production, because the cultivation area can be reduced by distributing the microbial cells vertically, thus avoiding loss of ammonia and CO2. The aim of this study was to investigate the influence of light intensity and dilution rate on the photosynthetic efficiency and CO2 assimilation efficiency of A. platensis cultured in a tubular photobioreactor in a continuous process. Urea was used as a nitrogen source and CO2 as carbon source and for pH control. Steady-state conditions were achieved in most of the runs, indicating that continuous cultivation of this cyanobacterium in a tubular photobioreactor could be an interesting alternative for the large-scale fixation of CO2 to mitigate the greenhouse effect while producing high protein content biomass.
Resumo:
The xylanase biosynthesis is induced by its substrate-xylan. The high xylan content in some wastes such as wheat residues (wheat bran and wheat straw) makes them accessible and cheap sources of inducers to be mainly applied in great volumes of fermentation, such as those of industrial bioreactors. Thus, in this work, the main proposal was incorporated in the nutrient medium wheat straw particles decomposed to soluble compounds (liquor) through treatment of lignocellulosic materials in autohydrolysis process, as a strategy to increase and undervalue xylanase production by Aspergillus ochraceus. The wheat straw autohydrolysis liquor produced in several conditions was used as a sole carbon source or with wheat bran. The best conditions for xylanase and beta-xylosidase production were observed when A. ochraceus was cultivated with 1% wheat bran added of 10% wheat straw liquor (produced after 15 min of hydrothermal treatment) as carbon source. This substrate was more favorable when compared with xylan, wheat bran, and wheat straw autohydrolysis liquor used separately. The application of this substrate mixture in a stirred tank bioreactor indicated the possibility of scaling up the process to commercial production.