871 resultados para Flue gas fan
Resumo:
Factors involved in the determination of PAHs (16 priority PAHs as an example) and PCBs (10 PCB congeners, representing 10 isomeric groups) by capillary gas chromatography coupled with mass spectrometry (GC/MS, for PAHs) and electron capture detection (GC/ECD , for PCBs) were studied, with emphasis on the effect of solvent. Having various volatilities and different polarities, solvent studied included dichloromethane, acetonitrile, hexan e, cyclohexane, isooctane, octane, nonane, dodecane, benzene, toluene, p-xylene, o-xylene, and mesitylene. Temperatures of the capillary column, the injection port, the GC/MS interface, the flow rates of carrier gas and make-up gas, and the injection volume were optimized by one factor at a time method or simplex optimization method. Under the optimized conditions, both peak height and peak area of 16 PAHs, especially the late-eluting PAHs, were significantly enhanced (1 to 500 times) by using relatively higher boiling point solvents such as p-xylene and nonane, compared with commonly used solvents like benzene and isooctane. With the improved sensitivity, detection limits of between 4.4 pg for naphthalene and 30.8 pg for benzo[g,h,i]perylene were obtained when p-xylene was used as an injection solvent. Effect of solvent on peak shape and peak intensity were found to be greatly dependent on temperature parameters, especially the initial temperature of the capillary column. The relationship between initial temperature and shape of peaks from 16 PAHs and 10 PCBs were studied and compared when toluene, p-xylene, isooctane, and nonane were used as injection solvents. If a too low initial temperature was used, fronting or split of peaks was observed. On the other hand, peak tailing occurred at a too high initial column temperature. The optimum initial temperature, at which both peak fronting and tailing were avoided and symmetrical peaks were obtained, depended on both solvents and the stationary phase of the column used. On a methyl silicone column, the alkane solvents provided wider optimum ranges of initial temperature than aromatic solvents did, for achieving well-shaped symmetrical GC peaks. On a 5% diphenyl: 1% vinyl: 94% dimethyl polysiloxane column, when the aromatic solvents were used, the optimum initial temperature ranges for solutes to form symmetrical peaks were improved to a similar degree as those when the alkanes were used as injection solvents. A mechanism, based on the properties of and possible interactions among the analyte, the injection solvent, and the stationary phase of the capillary column, was proposed to explain these observations. The effect of initial temperature on peak height and peak area of the 16 PAHs and the 10 PCBs was also studied. The optimum initial temperature was found to be dependent on the physical properties of the solvent used and the amount of the solvent injected. Generally, from the boiling point of the solvent to 10 0C above its boiling point was an optimum range of initial temperature at which cthe highest peak height and peak area were obtained.
Resumo:
Part I - Fluorinated Compounds A method has been developed for the extraction, concentration, and determination of two unique fluorinated compounds from the sediments of Lake Ontario. These compounds originated from a common industrial landfill, and have been carried to Lake Ontario by the Niagara River. Sediment samples from the Mississauga basin of Lake Ontario have been evaluated for these compounds and a depositional trend was established. The sediments were extracted by accelerated solvent extraction (ASE) and then underwent clean-up, fractionation, solvent exchange, and were concentrated by reduction under nitrogen gas. The concentrated extracts were analyzed by gas chromatography - electron capture negative ionization - mass spectrometry. The depositional profile determined here is reflective of the operation of the landfill and shows that these compounds are still found at concentrations well above background levels. These increased levels have been attributed to physical disturbances of previously deposited contaminated sediments, and probable continued leaching from the dumpsite. Part II - Polycyclic Aromatic Hydrocarbons Gas chromatography/mass spectrometry is the most common method for the determination of polycyclic aromatic hydrocarbons (PAHs) from various matrices. Mass discrimination of high-boiling compounds in gas chromatographic methods is well known. The use of high-boiling injection solvents shows substantial increase in the response of late-eluting peaks. These solvents have an increased efficiently in the transfer of solutes from the injector to the analytical column. The effect of I-butanol, I-pentanol, cyclopentanol, I-hexanol, toluene and n-octane, as injection solvents, was studied. Higher-boiling solvents yield increased response for all PAHs. I -Hexanol is the best solvent, in terms of P AH response, but in this solvent P AHs were more susceptible to chromatographic problems such as peak splitting and tailing. Toluene was found to be the most forgiving solvent in terms of peak symmetry and response. It offered the smallest discrepancies in response, and symmetry over a wide range of initial column temperatures.
Resumo:
This small tintype features a young Black woman standing in front of a painted backdrop with a large stone in the foreground at the studio of an unknown photographer. The unidentified woman is wearing a hat and holding a round fan. This black and white tintype was in the possession of Iris Sloman Bell, of St. Catharines, Ontario. Relatives of the Bell - Sloman families are former slaves from the United States who settled in Canada."Tintypes were the invention of Prof. Hamilton Smith of Ohio. They begin as thin sheets of iron, covered with a layer of black paint. This serves as the base for the same iodized collodion coating and silver nitrate bath used in the ambrotype process. First made in 1856, millions were produced well into the twentieth century. When tintypes were finished in the same sorts of mats and cases used for ambrotypes, it can be almost impossible to distinguish which process was used without removing the image to examine the substrate."
Resumo:
This thesis examines the religious dimension of fandom in popular music, taking as an object of reflection Lady Gaga and her fans. I combine fan studies with theories of immanence as well as Deleuze and Guattari's notion of the process of becoming, and provide a theoretical reading of the relationship between Lady Gaga and her most fervent fans, the 'little monsters.' Both fandom and religion promise a stable sense of identity and authentic community to devotees. Performing deconstructive discourse analysis on three of Lady Gaga's music videos, I demonstrate how fandom, like organized religion, can simultaneously be an emancipatory practice and a practice that seeks to deny individual subjects their agency. This thesis provides a new theoretical framework for understanding fandom, and illustrates how the purported benefits of both fandom and religion can only be gained when the figureheads of each group are symbolically destroyed by the members themselves.
Resumo:
Limited academic attention has been given to the nexus between corruption in soccer and its impact on fandom. Consequently, the purpose of this qualitative study was to better understand the lived experiences of highly identified soccer fanatics living through this era of match fixing in the sport. Social networking site Twitter was utilized to recruit participants from three continents – Africa, Europe, and North America – based on submissions to the site in response to a perceived fix from a high-profile March, 2013 match. A total of 12 semi-structured interviews were conducted with highly identified soccer fans in accordance with Funk and James’ (2001) Psychological Continuum Model (PCM). Despite the majority of participants feeling skepticism about the purity of soccer today, half of the participants’ fandom remained unchanged in the face of perceived match fixing. Directions for future research and recommendations are considered and discussed.
Resumo:
Certificate for 60 shares of capital stock in High Pressure Oil and Gas Syndicate, Limited to Hamilton K. Woodruff, Nov. 1, 1922.
Resumo:
Receipt from G. Lloyd, dealer in hot air furnaces, stoves, ranges, gas fixtures and pumps, located on King Street, St. Catharines regarding payment received for burners, dampers and other gas fixtures, Jan. 1, 1875.
Resumo:
Receipt from Mitchell, Vance and Co. of New York for gas fixtures, Sept. 13, 1876.
Resumo:
Letter to Mr. W.D. Woodruff of Lincoln Paper Mills, Merritton from P.J. Price of the United Gas Companies, St. Catharines regarding a cheque received from E.J. McIntyre for $200. Included with this letter is an envelope addressed to W.D. Woodruff, Dec. 27, 1910.
Resumo:
Receipt from John Burrow, Steam and Gas Fitter and Plumber, St. Catharines for work done, March 31, 1887.
Resumo:
Receipt from the St. Catharines and Welland Canal Gas Light Company for gas rent, April 4, 1887.
Resumo:
Receipt from St. Catharines and Welland Canal Gas Light Company for gas rent, May 1, 1887.
Resumo:
Receipt from St. Catharines and Welland Canal Gas Light Company for gas rent, June 6, 1887.
Resumo:
Receipt from St. Catharines and Welland Canal Gas Light Company for gas rent, July 4, 1887.
Resumo:
Receipt from St. Catharines and Welland Canal Gas Light Company for gas rent, Sept. 3, 1887.