Impacto de la obra Presa Potrerillos en los habitantes de la villa y su entorno inmediato

A fines de la década de los noventa se inicia en Mendoza la construcción de la presa Potrerillos, obra hidroeléctrica que tiene el propósito de regular las aguas del río Mendoza, del cual depende el riego y la vida de gran parte del oasis Norte de la provincia. En la serie de beneficios que se esperan de esta obra no figura la población local, que es la directamente afectada. Los resultados obtenidos permiten descubrir aspectos de la realidad y del estilo de vida de Potrerillos hasta el momento desconocidos y que hacen predecir el fuerte impacto socioeconómico que tendrá esta obra, al tener que trasladar población y al constituirse en un polo de atracción para grandes contingentes de turistas ocasionales que buscan aprovechar el espejo de agua o disfrutar del medio natural. El diagnóstico obtenido permite descubrir las alteraciones socioeconómicas a producirse debido a la relocalización de familias, cuyos lotes y viviendas quedarán bajo el agua, aspectos que no se tienen en cuenta en la evaluación de impacto ambiental, en donde se pone el acento en aquellos impactos que pueden llegar a alterar el ecosistema local y regional, pero no en los efectos que ocasionará en la calidad de vida de los lugareños.

Pollen records of the Bykovsky Peninsula

New pollen and radiocarbon data from the Bykovsky Peninsula document the Late Pleistocene and Holocene environmental history of the Laptev Sea coast. More than 60 AMS-14C and conventional 14C dates indicate that the deposits accumulated during the last 60,000 radiocarbon yr BP. High concentration of green alga colonies (Pediustrum and Botryococcus) in the investigated sediment show that sedimentation was mostly in shallow water environments. Scarce grass and sedge communities dominated the vegetation 53-60 kyr BP. Climate was cold and dry. Open Poaceae and Cypcraccae associations with Asteraceae, Ranunculaceae, and Cichoriaceac, dominated in the area about 48-42.5 kyr BP. Steppic communities with Artemisia and shrubby tundra communities with Salix and Betula sect. Nanae were also present. Climate was dry, but relatively warm. Vegetation cover became denser about 42.5-33.5 kyr BP, reflecting more favorable climate conditions. Scarce Poaceae communities with some Caryophyllaceae, Asteraceae, Cichoriaceae, and Selaginella rupestris covered the Bykovsky Peninsula area during the Sartan (Late Weichselian) stage about 26-16 kyr BP. Disturbed, uncovered soils were very common in the area. Climate was extremely cold and dry. Poaceae and Cyperaceae associations with Caryophyllaceae, Asteraceae, Cichoriaceae dominated the vegetation in the late Sartan, ca 16-12.2 kyr BP. Climate was significantly warmer than in the early Sartan time. The lee Complex sedimentation was interrupted about 12 kyr BP; most likely it was connected with the beginning of the Allerod warnring. Shrubby (Betula sect. Nanae, Alnusfnuicosa, Salix, Ericales) tundra was widely distributed on the Bykovsky Peninsula during the early-middle Holacene. Climate was most favorable between 8200 and 4500 yr BP. Vegetation became similar to modern after 4500 yr BP, suggesting a deterioration of climate.

Velocity-density systematics for basalts at DSPD Leg 54 Holes

Precise velocity and density measurements at atmospheric and elevated pressures have been obtained on basalts drilled in 13 holes during Leg 54. The vp-sigma data show systematics which are controlled by the degree of crystallinity (or conversely, glassiness), microstructure, and original mineralogy and chemistry. Extensively fractionated basalts with marked iron enrichment produce anomalously low measured velocities at densities above 2.90 g/cm**3. Also, the effective in situ pressure acting on Leg 54 basalts is less than hydrostatic, and perhaps close to zero. At zero effective pressure, the measured velocities average 2.5 km/s higher than East Pacific Rise upper crustal velocities determined by seismic refraction. This implies that the in situ velocities are undoubtedly a result of the highly fragmented nature of East Pacific Rise crust.

Climate reconstructions from the Tibet Plateau (PKDB286426)

Fluid inclusions of protogenous halite, which were collected from two boreholes in the Charhan Salt Lake in the north part of the Qinghai-Xizang Plateau, werea nalyzed for their hydrogen and oxygen isotopes and for their Na, Mg etc. ions.On these grounds, the evolution of lake environment in this region during the last 50 000 years are discussed in this paper. The emphasis is to discuss the time range of extremely arid and cold climate at the last Glacial stage and the geological event of playa associated with such a climate.The guanidine hydrochloride method was used for measurement of hydrogen and oxygen stable isotopes. The measurement of Na, Mg etc. ions were achieved by determination of crystallization temperature of hydrohalite under microscope and then by calculation of chemical compositions of inclusion fluid using a thermodynamic model.The results obtained show that protogenous halite in the Charhan Lake area was formed in three different environment conditions: (1) In fluid inclusions of halite formed in the early period (50 000-30 000 a B. P. ), dD averages -14.9 per mil, d(18)O averages 8.37 per mil, and Mg(2+)ranges from 0.42 to 1.59 mol/L. Their plotting points fall on the right top part of the evaporation line of the present Charhan Lake area, indicating that the Lake water at that time had a higher concentration of brine, and the climate was hot and dry. (2) In fluid inclusions of halite formed in the middle period (30 000-15 000 a B. P.), SD average -66.0 per mil, d(18)O averages 1.00 pr mil, and Mg(2+) 1 mol/L. Their plotting points fall on the left low part of the evaporation line, indicating that the lake water at that time had a concentration of brine lower than that in the early period, and the environment was cold and dry. (3) In fluid inclusions of halite formed in the late period (15 000-present), dD averages 30.8 per mil, d(18)O averages 5.85 per mil, and Mg(2+) M 1 mol/L. Their plotting fall on the evaporation line, indicating that the climate environment at that time was warm and dry, almost the same as the present.The temperature variation of the last 50 000 years in the Charhan Lake area was calculated using the conversion equation proposed by Lorious et al. The time range of the Great ice age of the Last Glacial Stage is about 21 000-15 000 a B.P., which basically coincides with the time of a worldwide low sea level. The temperature in that period was below 0°C and 6-7°C lower than now. Because of lower temperatures, water supply to the lake area decreased rapidly and the concentration of lake water increased sharply. Therefore the Mg(2+) concentration in inclusion fluid reaches or closes to 2mol/L and the Mg/Na ratio varies within a very wide range. These show that the Charhan Lake at that time entered its playa stage. The Charhan Salt Lake is a typical one in the north part of the Qinghai-Xizang Plateau. It can be supposed that the extremely arid and cold climate of the Great Ice Age made most lakes in the north part of the Qinghai-Xizang Plateau enter their playa stage. This event is of importance for formation of salt resources.

Two pollen profiles of the middle Pleistocene at Samerberg/Upper Bavaria, Germany

Previous pollen analytical studies on sediments from the pleistocene lake basin at Samerberg, situated on the northern edge of the Bavarian Alps (47°45' N, 12°12' E, 607 m a.s.l.) had been performed on samples taken from cores and exposures close to the southern shore of the former lake. After geoelectric and refraction-seismic measurements had shown that the lake basin had been much deeper in its northern part, another core was taken where maximum depth could be expected. The corer penetrated three moraines, two of them lying above pollen-bearing sediments, and one below them, and reached the hard rock (Kössener Kalk) at a depth of 93 m. Two forest phases could be identified by pollen analysis. The pollen record begins abruptly in a forest phase at the end of a spruce-dominated period when fir started to spread (DA 1, DA = pollen zone). Following this, Abies (fir) was the main tree species at Samerberg, Picea being second, and deciduous trees were almost non-existent. First box (Buxus) was of major importance in the fir forests (DA 2), but later on beech (Fagus) and wing-nut (Pterocarya) spread (DA 3). Finally this forest gave way to a spruce forest with pine (DA 4). The beginning and the end of this interglacial cycle are not recorded. Its vegetational development is different from the eemian one known from earlier studies at Samerberg. It is characterized by the occurrence of Abies together with Buxus, Pterocarya and Fagus. A similar association of woody species is known only from the Holsteinian age deposits in an area ranging from England to Poland, though at no other place these species were such important constituents of the vegetation as at Samerberg. Therefore zone 1 to 4 are attributed to the Holsteinian interglacial period. The younger forest phase, separated from the interglacial by a stadial with open vegetation (DA 5), seems to be completely represented, though its sediments are disturbed, apparently by sliding which caused repetition of same-age-sediments in the core (DA 7a, b, c) The vegetational development is simple. A juniper phase (DA 6) was followed by reforestation with spruce, accompanied by some fir (DA 7, 9). Finally pine became the dominant species (DA 9). The simple vegetational development of this younger forest phase does not allow a safe correlation with one of the known pre-eemian interstadials, but for stratigraphical reasons it can be related best to the Dömnitz-interglacial, which among others is also known as Wacken- or Holstein-II-interglacial. Possibly another phase of reforestation is indicated at the end of the following stadial (DA 10). But due to an erosional unconformity nothing than the rise of the juniper curve can be stated. It was only after this sequence of forest phases and periods with open vegetation that glaciers reached the Samerberg area again.

Geochemistry of glass shards in the volcanic ash layers of the Izu-Bonin Arc

To examine the processes and histories of arc volcanism and of volcanism associated with backarc rifting. 130 samples containing igneous glass shards were taken from the Plioccne-Quatemai^ succession on the rift Hank (Site 788) and the Quaternary fill in the basin fill of the Sumisu Rift (Sites 790 and 791). These samples were subsequently analyzed at the University of Illinois at Chicago and Shizuoka University. The oxides determined by electron probe do not account for the total weight of the material; differences between summed oxides and 100% arise from the water contents, probably augmented by minor losses thai result from alkali vaporization during analysis. Weight losses in colorless glasses are up to 9%; those in brown glasses (dacitcs to basalts) arc no more than 4.5%; shards from the rift-flank (possibly caused by prolonged proximity to ihc scafloor) generally have higher values than those from the rift-basin fill How much of the lost water is magmatic, and how much is hydrated is uncertain; however, although the shards absorb potassium, calcium, and magnesium during hydration in the deep sea, they do so only to a minor extent that does not significantly alter their major element compositions. Therefore, the electron-probe results are useful in evaluating the magmatism recorded by the shards. Pre- and syn-rift Izu-Bonin volcanism were overwhelmingly dominated by rhyolile explosions, demonstrating that island arcs may experience significant silicic volcanism in addition to the extensive basaltic and basaltic andestic activity, documented in many arcs since the 1970s, that occurs in conjunction with the andesitic volcanism formerly thought to be dominant. Andesitic eruptions also occurred before rifting, but the andesitic component in our samples is minor. All the pre- and syn-rift rhyolites and andesites belong to the low-alkali island-arc tholeiitic suite, and contrast markedly with the alkali products of Holocene volcanism on the northernmost Mariana Arc that have been attributed to nascent rifting. The Quaternary dacites and andesites atop the rift flank and in the rift-basin fill are more potassic than those of Pliocene age, as a result of assimilation from the upper arc crust, or from variations in degrees of partial melting of the source magmas, or from metasomatic fluids. All the glass layers from the rift-flank samples belong to low-K arc-tholeiitic suites. Half of those in the Pliocene succession are exclusively rhyolitic: the others contain minor admixtures of dacite and andesite, or andesite and either basaltic andesite or basalt. In Contrast, the Quaternary (syn-rift) volcaniclastics atop the rift-flank lack basalt and basaltic andesite shards. These youngest sediments of the rift flank show close compositional affinities with five thick layers of coarse, rhyolitic pumice deposits in the basin fill, the two oldest more silicic than the younger ones. The coarse layers, and most thin ash layers that occur in hemipelagites below and intercalated between them, are low-K rhyolites and therefore probably came from sources in the arc. However, several thin rhyolitic ash beds in the hemipelagites are abnormally enriched in potassium and must have been provided by more distal sources, most likely to the west in Japan. Remarkably, the Pliocene-Pleistocene geochemistry of the volcanic front does not appear to have been influenced by the syn-rift basaltic volcanism only a few kilometers away. Rare, thin layers of basaltic ash near the bases of the rift-basin successions are not derived from the arc. They deviate strongly from trends that the arc-derived glasses display on oxide-oxide plots, and show close affinities to the basalts empted all over the Sumisu Rift during rifting. These basalts, and the basaltic ashes in the basal rift-basin fill, arc compositionally similar to those erupted from mature backarc basins elsewhere.

Dinoflagellate cyst of sediment core M35003-4 southeast of Grenada

High-resolution, well-dated calcareous dinoflagellate cyst and organic carbon records from a 58 kyr sediment core (M35003-4) located southeast of the island of Grenada show that rapid and pronounced changes in cyst association and accumulation and organic carbon deposition occurred, controlled by (1) a significant southward shift in the position of the North Equatorial Current during the last glacial period and the Younger Dryas cold interval and (2) rapid changes in local productivity in marine isotopic stage 3 that are associated with variations in Orinoco River nutrient discharge and coastal upwelling strength. Prominent cyst accumulation peaks representing extremely oligotrophic and stratified thermocline conditions mimic the Greenland ice core and northern Atlantic Dansgaard/Oeschger stadials and Heinrich events. We provide new evidence for a coupled tropical/high-latitude Atlantic climate system during the last glacial period and suggest that changes in the zonality of the low-latitude winds may play an important role in modulating rapid interhemispheric climate variability.

Response of benthic foraminifera to ocean acidification in their natural sediment environment: a long-term culturing experiment

Calcifying foraminifera are expected to be endangered by ocean acidification; however, the response of a complete community kept in natural sediment and over multiple generations under controlled laboratory conditions has not been constrained to date. During 6 months of incubation, foraminiferal assemblages were kept and treated in natural sediment with pCO2-enriched seawater of 430, 907, 1865 and 3247 µatm pCO2. The fauna was dominated by Ammonia aomoriensis and Elphidium species, whereas agglutinated species were rare. After 6 months of incubation, pore water alkalinity was much higher in comparison to the overlying seawater. Consequently, the saturation state of Omega calc was much higher in the sediment than in the water column in nearly all pCO2 treatments and remained close to saturation. As a result, the life cycle (population density, growth and reproduction) of living assemblages varied markedly during the experimental period, but was largely unaffected by the pCO2 treatments applied. According to the size-frequency distribution, we conclude that foraminifera start reproduction at a diameter of 250 µm. Mortality of living Ammonia aomoriensis was unaffected, whereas size of large and dead tests decreased with elevated pCO2 from 285 µm (pCO2 from 430 to 1865 µatm) to 258 µm (pCO2 3247 µatm). The total organic content of living Ammonia aomoriensis has been determined to be 4.3% of CaCO3 weight. Living individuals had a calcium carbonate production rate of 0.47 g/m**2/a, whereas dead empty tests accumulated a rate of 0.27 g /m**2/a. Although Omega calc was close to 1, approximately 30% of the empty tests of Ammonia aomoriensis showed dissolution features at high pCO2 of 3247 µatm during the last 2 months of incubation. In contrast, tests of the subdominant species, Elphidium incertum, stayed intact. Our results emphasize that the sensitivity to ocean acidification of the endobenthic foraminifera Ammonia aomoriensis in their natural sediment habitat is much lower compared to the experimental response of specimens isolated from the sediment.

Chemical composition of organic matter in ocean sediments

Group composition of organic matter in recent ocean sediments with high Corg content has been studied in detail. It has been shown that organic matter in sediments with Corg content greater than 4% is present in the very earliest stages of transformation. Group composition of amino acids is practically similar to that of their main producer, namely phytoplankton. Organic matter of sediments with Corg content below 4% is, from this standpoint, more transformed and is close to organic matter in usual type sediments with similar Corg content.

The impact of unstable aids on consumption volatility in developing countries

In recent years, a large and expanding literature has examined the properties of developing economies with regard to the macroeconomic cycle.1 One such property that is characteristic of developing economies is large fluctuations in consumption. Meanwhile, aid for the low income countries is extremely volatile, and under certain circumstances, the volatile aid amplifies the consumption volatility. This document examines whether it is possible that the volatile aid yields high consumption volatility in African countries that constitute the majority of the low income countries. Our numerical analysis reveals that the strongly influential aid disbursements yield a considerably large fluctuation in consumption.

Numerical simulation of the upward propagation of a flame in a vertical tube filled with a very lean mixture.

Upwardpropagation of a premixed flame in averticaltubefilled with a very leanmixture is simulated numerically using a single irreversible Arrhenius reaction model with infinitely high activation energy. In the absence of heat losses and preferential diffusion effects, a curved flame with stationary shape and velocity close to those of an open bubble ascending in the same tube is found for values of the fuel mass fraction above a certain minimum that increases with the radius of the tube, while the numerical computations cease to converge to a stationary solution below this minimum mass fraction. The vortical flow of the gas behind the flame and in its transport region is described for tubes of different radii. It is argued that this flow may become unstable when the fuel mass fraction is decreased, and that this instability, together with the flame stretch due to the strong curvature of the flame tip in narrow tubes, may be responsible for the minimum fuel mass fraction. Radiation losses and a Lewis number of the fuel slightly above unity decrease the final combustion temperature at the flame tip and increase the minimum fuel mass fraction, while a Lewis number slightly below unity has the opposite effect.

A policy-driven architecture for supporting joint degrees through e-learning services

En un mercado de educación superior cada vez más competitivo, la colaboración entre universidades es una efectiva estrategia para acceder al mercado global. El desarrollo de titulaciones conjuntas es un importante mecanismo para fortalecer las colaboraciones académicas y diversificar los conocimientos. Las titulaciones conjuntas están siendo cada vez más implementadas en las universidades de todo el mundo. En Europa, el proceso de Bolonia y el programa Erasmus, están fomentado el reconocimiento de titulaciones conjuntas y dobles y promoviendo la colaboración entre las instituciones académicas. En el imparable proceso de la globalización y convergencia educativa, el uso de sistemas de e-learning para soportar cursos tanto semipresencial como online es una tendencia en crecimiento. Dado que los sistemas de e-learning soportan una amplia variedad de cursos, es necesario encontrar una solución adecuada que permita a las universidades soportar y gestionar las titulaciones conjuntas a través de sus sistemas de e-learning en conformidad con los acuerdos de colaboración establecidos por las universidades participantes. Esta tesis doctoral abordará las siguientes preguntas de investigación: 1. ¿Qué factores deben tenerse en cuenta en la implementación y gestión de titulaciones conjuntas? 2. ¿Cómo pueden los sistemas actuales de e-learning soportar el desarrollo de titulaciones conjuntas? 3. ¿Qué otros servicios y sistemas necesitan ser adaptados por las universidades interesadas en participar en una titulación conjunta a través de sus sistemas de e-learning? La implementación de titulaciones conjuntas a través de sistemas de e-learning es compleja e implica retos técnicos, administrativos, culturales, financieros, jurídicos y de seguridad. Esta tesis doctoral propone una serie de contribuciones que pueden ayudar a resolver algunos de los retos identificados. En primer lugar se ha elaborado un modelo conceptual que incluye la información del contexto de las titulaciones conjuntas que es relevante para la implementación de estas titulaciones en los sistemas de e-learning. Después de definir el modelo conceptual, se ha propuesto una arquitectura basada en políticas para la implementación de titulaciones interinstitucionales a través de sistemas de e-learning de acuerdo a los términos estipulados en los acuerdos de colaboración que son firmados por las universidades participantes. El autor se ha centrado en el componente de gestión de flujos de trabajo de esta arquitectura. Por último y con el fin de permitir la interoperabilidad de repositorios de objetos educativos, los componentes básicos a implementar han sido identificados y validados. El uso de servicios multimedia en educación es una tendencia creciente, proporcionando servicios de e-learning que permiten mejorar la comunicación y la interacción entre profesores y alumnos. Dentro de estos servicios, nos hemos centrado en el uso de la videoconferencia y la grabación de clases como servicios adecuados para el desarrollo de cursos impartidos en escenarios de educación colaborativos. Las contribuciones han sido validadas en proyectos de investigación de ámbito nacional y europeo en los que el autor ha participado. Abstract In an increasingly competitive higher education market, collaboration between universities is an effective strategy for gaining access to the global market. The development of joint degrees is an important mechanism for strengthening academic research collaborations and diversifying knowledge. Joint degrees are becoming increasingly implemented in universities around the world. In Europe, the Bologna process and the Erasmus programme have encouraged both the global recognition of joint and double degrees and promoted close collaboration between academic institutions. In the unstoppable process of globalization and educational convergence, the use of e-learning systems for supporting both blended and online courses is becoming a growing trend. Since e-learning systems covers a wide range of courses, it becomes necessary to find a suitable solution that enables universities to support and manage joint degrees through their e-learning systems in accordance with the collaboration agreements established by the universities involved. This dissertation will address the following research questions: 1. What factors need to be considered in the implementation and management of joint degrees? 2. How can the current e-learning systems support the development of joint degrees? 3. What other services and systems need to be adapted by universities interested in participating in a joint degree through their e-learning systems? The implementation of joint degrees using e-learning systems is complex and involves technical, administrative, security, cultural, financial and legal challenges. This dissertation proposes a series of contributions to help solve some of the identified challenges. One of the cornerstones of this proposal is a conceptual model of all the relevant issues related to the support of joint degrees by means of e-learning systems. After defining the conceptual model, this dissertation proposes a policy-driven architecture for implementing inter-institutional degree collaborations through e-learning systems as stipulated by a collaboration agreement signed by two universities. The author has focused on the workflow management component of this architecture. Finally, the building blocks for achieving interoperability of learning object repositories have been identified and validated. The use of multimedia services in education is a growing trend, providing rich e-learning services that improve the communication and interaction between teachers and students. Within these e-learning services, we have focused on the use of videoconferencing and lecture recording as the best-suited services to support collaborative learning scenarios. The contributions have been validated within national and European research projects that the author has been involved in.

Applications for wireless sensor networks : tracking with binary proximity sensors

El interés cada vez mayor por las redes de sensores inalámbricos pueden ser entendido simplemente pensando en lo que esencialmente son: un gran número de pequeños nodos sensores autoalimentados que recogen información o detectan eventos especiales y se comunican de manera inalámbrica, con el objetivo final de entregar sus datos procesados a una estación base. Los nodos sensores están densamente desplegados dentro del área de interés, se pueden desplegar al azar y tienen capacidad de cooperación. Por lo general, estos dispositivos son pequeños y de bajo costo, de modo que pueden ser producidos y desplegados en gran numero aunque sus recursos en términos de energía, memoria, velocidad de cálculo y ancho de banda están enormemente limitados. Detección, tratamiento y comunicación son tres elementos clave cuya combinación en un pequeño dispositivo permite lograr un gran número de aplicaciones. Las redes de sensores proporcionan oportunidades sin fin, pero al mismo tiempo plantean retos formidables, tales como lograr el máximo rendimiento de una energía que es escasa y por lo general un recurso no renovable. Sin embargo, los recientes avances en la integración a gran escala, integrado de hardware de computación, comunicaciones, y en general, la convergencia de la informática y las comunicaciones, están haciendo de esta tecnología emergente una realidad. Del mismo modo, los avances en la nanotecnología están empezando a hacer que todo gire entorno a las redes de pequeños sensores y actuadores distribuidos. Hay diferentes tipos de sensores tales como sensores de presión, acelerómetros, cámaras, sensores térmicos o un simple micrófono. Supervisan las condiciones presentes en diferentes lugares tales como la temperatura, humedad, el movimiento, la luminosidad, presión, composición del suelo, los niveles de ruido, la presencia o ausencia de ciertos tipos de objetos, los niveles de tensión mecánica sobre objetos adheridos y las características momentáneas tales como la velocidad , la dirección y el tamaño de un objeto, etc. Se comprobara el estado de las Redes Inalámbricas de Sensores y se revisaran los protocolos más famosos. Así mismo, se examinara la identificación por radiofrecuencia (RFID) ya que se está convirtiendo en algo actual y su presencia importante. La RFID tiene un papel crucial que desempeñar en el futuro en el mundo de los negocios y los individuos por igual. El impacto mundial que ha tenido la identificación sin cables está ejerciendo fuertes presiones en la tecnología RFID, los servicios de investigación y desarrollo, desarrollo de normas, el cumplimiento de la seguridad y la privacidad y muchos más. Su potencial económico se ha demostrado en algunos países mientras que otros están simplemente en etapas de planificación o en etapas piloto, pero aun tiene que afianzarse o desarrollarse a través de la modernización de los modelos de negocio y aplicaciones para poder tener un mayor impacto en la sociedad. Las posibles aplicaciones de redes de sensores son de interés para la mayoría de campos. La monitorización ambiental, la guerra, la educación infantil, la vigilancia, la micro-cirugía y la agricultura son solo unos pocos ejemplos de los muchísimos campos en los que tienen cabida las redes mencionadas anteriormente. Estados Unidos de América es probablemente el país que más ha investigado en esta área por lo que veremos muchas soluciones propuestas provenientes de ese país. Universidades como Berkeley, UCLA (Universidad de California, Los Ángeles) Harvard y empresas como Intel lideran dichas investigaciones. Pero no solo EE.UU. usa e investiga las redes de sensores inalámbricos. La Universidad de Southampton, por ejemplo, está desarrollando una tecnología para monitorear el comportamiento de los glaciares mediante redes de sensores que contribuyen a la investigación fundamental en glaciología y de las redes de sensores inalámbricos. Así mismo, Coalesenses GmbH (Alemania) y Zurich ETH están trabajando en diversas aplicaciones para redes de sensores inalámbricos en numerosas áreas. Una solución española será la elegida para ser examinada más a fondo por ser innovadora, adaptable y polivalente. Este estudio del sensor se ha centrado principalmente en aplicaciones de tráfico, pero no se puede olvidar la lista de más de 50 aplicaciones diferentes que ha sido publicada por la firma creadora de este sensor específico. En la actualidad hay muchas tecnologías de vigilancia de vehículos, incluidos los sensores de bucle, cámaras de video, sensores de imagen, sensores infrarrojos, radares de microondas, GPS, etc. El rendimiento es aceptable, pero no suficiente, debido a su limitada cobertura y caros costos de implementación y mantenimiento, especialmente este ultimo. Tienen defectos tales como: línea de visión, baja exactitud, dependen mucho del ambiente y del clima, no se puede realizar trabajos de mantenimiento sin interrumpir las mediciones, la noche puede condicionar muchos de ellos, tienen altos costos de instalación y mantenimiento, etc. Por consiguiente, en las aplicaciones reales de circulación, los datos recibidos son insuficientes o malos en términos de tiempo real debido al escaso número de detectores y su costo. Con el aumento de vehículos en las redes viales urbanas las tecnologías de detección de vehículos se enfrentan a nuevas exigencias. Las redes de sensores inalámbricos son actualmente una de las tecnologías más avanzadas y una revolución en la detección de información remota y en las aplicaciones de recogida. Las perspectivas de aplicación en el sistema inteligente de transporte son muy amplias. Con este fin se ha desarrollado un programa de localización de objetivos y recuento utilizando una red de sensores binarios. Esto permite que el sensor necesite mucha menos energía durante la transmisión de información y que los dispositivos sean más independientes con el fin de tener un mejor control de tráfico. La aplicación se centra en la eficacia de la colaboración de los sensores en el seguimiento más que en los protocolos de comunicación utilizados por los nodos sensores. Las operaciones de salida y retorno en las vacaciones son un buen ejemplo de por qué es necesario llevar la cuenta de los coches en las carreteras. Para ello se ha desarrollado una simulación en Matlab con el objetivo localizar objetivos y contarlos con una red de sensores binarios. Dicho programa se podría implementar en el sensor que Libelium, la empresa creadora del sensor que se examinara concienzudamente, ha desarrollado. Esto permitiría que el aparato necesitase mucha menos energía durante la transmisión de información y los dispositivos sean más independientes. Los prometedores resultados obtenidos indican que los sensores de proximidad binarios pueden formar la base de una arquitectura robusta para la vigilancia de áreas amplias y para el seguimiento de objetivos. Cuando el movimiento de dichos objetivos es suficientemente suave, no tiene cambios bruscos de trayectoria, el algoritmo ClusterTrack proporciona un rendimiento excelente en términos de identificación y seguimiento de trayectorias los objetos designados como blancos. Este algoritmo podría, por supuesto, ser utilizado para numerosas aplicaciones y se podría seguir esta línea de trabajo para futuras investigaciones. No es sorprendente que las redes de sensores de binarios de proximidad hayan atraído mucha atención últimamente ya que, a pesar de la información mínima de un sensor de proximidad binario proporciona, las redes de este tipo pueden realizar un seguimiento de todo tipo de objetivos con la precisión suficiente. Abstract The increasing interest in wireless sensor networks can be promptly understood simply by thinking about what they essentially are: a large number of small sensing self-powered nodes which gather information or detect special events and communicate in a wireless fashion, with the end goal of handing their processed data to a base station. The sensor nodes are densely deployed inside the phenomenon, they deploy random and have cooperative capabilities. Usually these devices are small and inexpensive, so that they can be produced and deployed in large numbers, and so their resources in terms of energy, memory, computational speed and bandwidth are severely constrained. Sensing, processing and communication are three key elements whose combination in one tiny device gives rise to a vast number of applications. Sensor networks provide endless opportunities, but at the same time pose formidable challenges, such as the fact that energy is a scarce and usually non-renewable resource. However, recent advances in low power Very Large Scale Integration, embedded computing, communication hardware, and in general, the convergence of computing and communications, are making this emerging technology a reality. Likewise, advances in nanotechnology and Micro Electro-Mechanical Systems are pushing toward networks of tiny distributed sensors and actuators. There are different sensors such as pressure, accelerometer, camera, thermal, and microphone. They monitor conditions at different locations, such as temperature, humidity, vehicular movement, lightning condition, pressure, soil makeup, noise levels, the presence or absence of certain kinds of objects, mechanical stress levels on attached objects, the current characteristics such as speed, direction and size of an object, etc. The state of Wireless Sensor Networks will be checked and the most famous protocols reviewed. As Radio Frequency Identification (RFID) is becoming extremely present and important nowadays, it will be examined as well. RFID has a crucial role to play in business and for individuals alike going forward. The impact of ‘wireless’ identification is exerting strong pressures in RFID technology and services research and development, standards development, security compliance and privacy, and many more. The economic value is proven in some countries while others are just on the verge of planning or in pilot stages, but the wider spread of usage has yet to take hold or unfold through the modernisation of business models and applications. Possible applications of sensor networks are of interest to the most diverse fields. Environmental monitoring, warfare, child education, surveillance, micro-surgery, and agriculture are only a few examples. Some real hardware applications in the United States of America will be checked as it is probably the country that has investigated most in this area. Universities like Berkeley, UCLA (University of California, Los Angeles) Harvard and enterprises such as Intel are leading those investigations. But not just USA has been using and investigating wireless sensor networks. University of Southampton e.g. is to develop technology to monitor glacier behaviour using sensor networks contributing to fundamental research in glaciology and wireless sensor networks. Coalesenses GmbH (Germany) and ETH Zurich are working in applying wireless sensor networks in many different areas too. A Spanish solution will be the one examined more thoroughly for being innovative, adaptable and multipurpose. This study of the sensor has been focused mainly to traffic applications but it cannot be forgotten the more than 50 different application compilation that has been published by this specific sensor’s firm. Currently there are many vehicle surveillance technologies including loop sensors, video cameras, image sensors, infrared sensors, microwave radar, GPS, etc. The performance is acceptable but not sufficient because of their limited coverage and expensive costs of implementation and maintenance, specially the last one. They have defects such as: line-ofsight, low exactness, depending on environment and weather, cannot perform no-stop work whether daytime or night, high costs for installation and maintenance, etc. Consequently, in actual traffic applications the received data is insufficient or bad in terms of real-time owed to detector quantity and cost. With the increase of vehicle in urban road networks, the vehicle detection technologies are confronted with new requirements. Wireless sensor network is the state of the art technology and a revolution in remote information sensing and collection applications. It has broad prospect of application in intelligent transportation system. An application for target tracking and counting using a network of binary sensors has been developed. This would allow the appliance to spend much less energy when transmitting information and to make more independent devices in order to have a better traffic control. The application is focused on the efficacy of collaborative tracking rather than on the communication protocols used by the sensor nodes. Holiday crowds are a good case in which it is necessary to keep count of the cars on the roads. To this end a Matlab simulation has been produced for target tracking and counting using a network of binary sensors that e.g. could be implemented in Libelium’s solution. Libelium is the enterprise that has developed the sensor that will be deeply examined. This would allow the appliance to spend much less energy when transmitting information and to make more independent devices. The promising results obtained indicate that binary proximity sensors can form the basis for a robust architecture for wide area surveillance and tracking. When the target paths are smooth enough ClusterTrack particle filter algorithm gives excellent performance in terms of identifying and tracking different target trajectories. This algorithm could, of course, be used for different applications and that could be done in future researches. It is not surprising that binary proximity sensor networks have attracted a lot of attention lately. Despite the minimal information a binary proximity sensor provides, networks of these sensing modalities can track all kinds of different targets classes accurate enough.

Mobile devices: dominant design as a goal

Since the beginning of the smartphones in the 80s, the mobile device market has grown and evolved towards devices connected everywhere, with hardware more and more close to computers and laptops than a classic mobile telephone. Nowadays, this market seems to be crowded and some companies seem not to know exactly which step is next. In this manner, a concept appears in the market as a solution or a difficulty to overcome: the dominant design. The thesis aims to establish an analysis and definition of what a dominant design is and how we should understand this concept: which are the costumers’ demands and needs? How can we relate this information with the dominant design? What is the strategy of the firm before designing a device? Do they use a concept similar to a dominant design?. The research base its analysis in a theoretical framework based in innovation and marketing literature, to then compare the model studied with data collected from surveys made to customers, interviews made to workers of the mobile device market, and different new projects on the market. The research finishes with a discussion about the theoretical and the empirical frameworks, and concludes replying the research questions, and defining a dominant design and its current situation in the market. RESUMEN. Desde la aparición de los Smartphones en los años 80, el mercado de los dispositivos móviles ha crecido y evolucionado hacia dispositivos cada vez más conectados, con hardware cada vez más cercano a los ordenadores de sobremesa y portátiles que al clásico teléfono móvil. A día de hoy, el mercado está saturado y algunas compañías parecen dubitativas ante el próximo paso a seguir. De esta manera, el concepto del diseño dominante aparece en el mercado como una solución a esta dificultad. El primer capítulo de este estudio se centra en establecer, a modo de introducción, los antecedentes al caso a estudiar, el objetivo de la tesis con sus limitaciones y delimitaciones, así como la metodología utilizada. También se plantean las preguntas principales (Research Questions) sobre el objetivo de la tesis, las cuales darán respuesta en la conclusión final al caso de estudio. Este proyecto tiene como objetivo establecer un análisis y definición sobre que es un diseño dominante y qué deberíamos entender como tal: ¿cuáles son las necesidades y las exigencias de los clientes? ¿Cómo se puede relacionar esta información con el diseño dominante en el sector tecnológico? ¿Cuáles son las estrategias de las empresas antes de diseñar un nuevo dispositivo? ¿Usan un concepto o modelos similares a un diseño dominante? Posteriormente, el segundo capítulo expone la bibliografía utilizada, y el enfoque analítico que se llevará a cabo con las 3 principales fuentes de datos. La investigación enfoca su análisis en un marco teórico, basado en publicaciones y bibliografía relacionadas con la innovación y el marketing, para luego comparar el modelo estudiado con un marco empírico: datos obtenidos de encuestas a consumidores, entrevistas a profesionales del sector de los dispositivos móviles, y diferentes prototipos y nuevos proyectos en este mercado. Entre esta literatura se encuentran manuales de marketing como “22 Immutable laws of Marketing” (de Al Ries & Jack Trout), publicaciones sobre el sector industrial de la tecnología y negocios: “Crossing the Chasm” de Geoffrey A. Moore y modelos de innovación entre otros como “Mastering the Dynamics of Innovation” de James M. Utterback. El tercer capítulo corresponde al estudio del marco teórico de la tesis, donde se analizará principalmente el modelo de innovación utilizado (el modelo cíclico de Utterback) y varios principios de marketing aplicados a este sector. Se plantean las bases de este modelo, la definición que el propio Utterback ofrece sobre el diseño dominante, y las 3 fases del proceso del mismo (Fluid Phase, Transitional Phase y Specific Phase), donde las empresas cambian de estrategia según las circunstancias evolutivas del dispositivo, su posición respecto el líder del mercado, o los procesos de estandarización y de costes. Por último se plantea la base para el desarrollo del diseño dominante en un ciclo evolutivo constante en el tiempo. Respecto a la parte más analítica de la tesis, el cuarto capítulo se desarrolla a partir de los datos obtenidos de las fuentes de información en el marco empírico de estudio. Se obtienen conclusiones sobre los datos realizados en ambas encuestas (en Español e Inglés) y sobre la relevancia de esta información; se estudian uno por uno hasta cuatro casos de nuevos dispositivos a corto-medio plazo en el mercado y se obtienen unas conclusiones globales sobre las entrevistas realizadas a los profesionales del sector y la relevancia de todas estas informaciones. En el quinto capítulo de la tesis se desarrolla la discusión en torno a los marcos teórico y empírico utilizados, para concluir respondiendo a las “Research Questions”, definiendo de esta manera el concepto de diseño dominante y comparando esta definición con la situación real del mercado. Se contrastan las bases del modelo de Utterback con los datos obtenidos en el capítulo cuarto, enfatizando la comparación entre las fases de este modelo con la realidad obtenida a través del estudio. Las encuestas realizadas a los consumidores se enmarcan en la segunda y tercera fase del ciclo, donde el desarrollo del diseño dominante ya está establecido y más desarrollado, mientras que las entrevistas unifican varios puntos clave a tener en cuenta en la primera y segunda fases, orientándose a las capas previas del proceso. Después se comparan uno a uno los 4 dispositivos analizados, a fin de establecer su jerarquía dentro del mercado, como posibles nuevos diseños dominantes o evoluciones especializadas de otros que ya aparecieron en el mercado con anterioridad. Así mismo, en esta parte final del estudio se comparan entre sí los resultados similares entre las tres fuentes de datos, y se analiza la veracidad de todas las fuentes consultadas. Finalmente, se han registrado en un sexto capítulo todas las referencias utilizadas en este proyecto, tanto publicaciones bibliográficas, entrevistas, citas de personajes relevantes del sector y enlaces en la red sobre noticias relevantes. En el apartado de apéndices se adjuntan tres anexos, donde se adjunta información utilizada en el caso de estudio, y la cual se ha obviado del texto principal con el objetivo de agilizar la lectura y la comprensión del mismo. Estos tres apéndices corresponden a las dos encuestas realizadas en ambos idiomas y la entrevista realizada a los profesionales del sector de los dispositivos móviles.

The family of DOF transcription factors in Brachypodium distachyon: BdDof24 in germinating seeds

The DOF (DNA binding with One Finger) transcription factor (TF) family is characterized by a binding domain of 52 amino acid residues that is structured as a Cys2/Cys2 Zn2+ finger that recognizes the common core 5?-T/AAAAG-3? in the promoter regions of their target genes. DOF TFs have been associated with biological processes exclusive to higher plants and their close ancestors (algae, mosses and ferns).