La inadmisión como técnica multipropósito. Un análisis desde los recursos civiles en España y Chile

El presente trabajo pretende poner en tensión el concepto tradicional de la inadmisión, analizando el uso que se le ha dado respecto de los recursos en los sistemas procesales español y chileno. A partir del empleo en estos, que excede un control meramente procesal, se propone entender la inadmisión como una técnica multipropósito que solo se caracteriza por el momento en que se hace el juicio y no por su contenido.

La Unión Europea y España en su relación con el Magreb: Los casos de Marruecos y Argelia

354 p.

Reconocimiento y ejecución de los contratos de gestación por sustitución en España celebrados en el extranjero

El presente trabajo versa sobre los obstáculos y problemas jirídicos que existen en nuestro ordenamiento jurídico en relación al reconocimiento y su posterior ejecución de los contratos de gestación por sustitución elaborados en el extranjero al tratar de inscribirlos en el Registro Civil Español ya que son considerados contrarios al orden público por la legislación española. A lo largo del Trabajo se realiza un análisis jurisprudencial tanto a nivel español como europeo así como un estudio de derecho comparado.

Retos para mejorar el modelo de colaboración público-privada en España

En este artículo, escrito en memoria de Rafael Izquierdo de Bartolomé se describe la situación actual del modelo de colaboración público-privada en España, se enumeran las causas que han llevado a que en la actualidad, este modelo se encuentre en entredicho y, como conclusión, se plantean una serie de retos para que este modelo vuelva a ser uno de los ejes de la recuperación económica de nuestro país.

Rivalidad de preeminencias entre el cabildo civil y eclesiástico en los cortejos procesionales del Corpus Christi. Antequera (siglo XVI)

Entre 1598 y 1606 la procesión del Corpus en Antequera quedó suspendida por desavenencias entre los miembros del concejo y el clero de la Colegiata por ocupar los mejores puestos y más cercanos a la Sagrada Forma para significar así su posición predominante en la sociedad del momento. Las alteraciones a describir en el presente artículo forman parte del proceso de institucionalización de una fiesta, cuyo culmen estético y simbólico se confirma durante el siglo XVII, bajo la ideología contrarreformista de Trento. Between 1598 and 1606 the Corpus Christi’s procession in Antequera was suspended because of disagreements between the members of the Council and the clergy. These disagreements focused on the matter of who must occupy the best positions in the procession (that is: as close to the Communion Bread as possible). These locations signify the status in that society. The changes described in this paper are part of the process of institutionalization of a festivity, which reach its crowning moment (aesthetically and symbolically) during the seventeenth century, under the ideology of Trento.

Comunicación y cambio social en España: el impacto del 15M, cinco años después

En este artículo introductorio se desarrolla un breve resumen de la situación actual del campo de la Comunicación para el Desarrollo y el Cambio social en España, tanto en su vertiente práctica como académica. Este resumen sirve para contextualizar los diferentes artículos que componen el presente monográfico de Obets. En él recogemos una selección de 12 artículos, predominantemente dedicados a la descripción y análisis de los resultados de una serie de estudios de caso, cuyo objeto se sitúa con frecuencia tras la estela del 15M. Pero también se incluyen otros actores pertenecientes a la sociedad civil estructurada, como los que actúan en el ámbito educativo. Igualmente, se incluyen aportaciones desde escenarios latinoamericanos y estudios conceptuales y teóricos, como los que sirven de apertura y cierre del volumen.

Cooperación para el desarrollo España-Colombia, un enfoque de Economía Política

La Tesis Cooperación España- Colombia: un enfoque de Economía Política, realiza un análisis sobre los problemas de agencia existentes en la cooperación al desarrollo, entre países donantes y receptores, aplicado al caso de Colombia. Teorías como Elección Pública, Gobernanza, Economía Neo institucional, sirven de marco para contrastar fallos de gobierno, asimetrías de información, riesgo moral, selección adversa, buscadores de renta. La investigación aporta las siguientes evidencias: Hay necesidad de impulsar la gobernanza en la cooperación al desarrollo, por que las decisiones sobre cooperación bilateral se toman entre los gobiernos de los países, sin evidencias reales de procesos de gobernanza que integre en el diseño de estrategias de desarrollo, la participación de representantes del Estado, sociedad civil y mercado – sector privado. Por esta razón en los foros de Eficacia de la ayuda como Accra (2008) y Busan (20011), se impulsó el concepto de apropiación democrática, que incluye como actor de cooperación a la sociedad civil. Sin embargo, este proceso no está aún integrado en un claro arreglo institucional. Los principios de eficacia de la ayuda de la declaración de Paris, compromete al país donante a alinearse con el país receptor. Sin embargo otorgar todo este poder discrecional a países receptores, puede ser más dificultoso en naciones con menor fortalecimiento institucional por problemas como corrupción, estados frágiles o conflictos armados. El caso colombiano es un ejemplo de los problemas de agencia por conflicto entre ideas e intereses, que genera la alineación de países donantes con receptores. Después de la adhesión de Colombia a la Declaración de Paris en 2007, el compromiso del gobierno de Colombia era acordar la cooperación de forma bilateral, contando con el alineamiento del país receptor. Por lo tanto el gobierno no vio la necesidad de seguir consensuando sus estrategias de cooperación con la participación de donantes y sociedad civil, como lo hizo en la primera estrategia de cooperación de Colombia 2003 – 2006, lo que demuestra como la adhesión a la Declaración de Paris desestimuló procesos de gobernanza...

Model Based Estimating System for Civil Concrete Structures

An earlier CRC-CI project on ‘automatic estimating’ (AE) has shown the key benefit of model-based design methodologies in building design and construction to be the provision of timely quantitative cost evaluations. Furthermore, using AE during design improves design options, and results in improved design turn-around times, better design quality and/or lower costs. However, AEs for civil engineering structures do not exist; and research partners in the CRC-CI expressed interest in exploring the development of such a process. This document reports on these investigations. The central objective of the study was to evaluate the benefits and costs of developing an AE for concrete civil engineering works. By studying existing documents and through interviews with design engineers, contractors and estimators, we have established that current civil engineering practices (mainly roads/bridges) do not use model-based planning/design. Drawings are executed in 2D and only completed at the end of lengthy planning/design project management lifecycle stages. We have also determined that estimating plays two important, but different roles. The first is part of project management (which we have called macro level estimating). Estimating in this domain sets project budgets, controls quality delivery and contains costs. The second role is estimating during planning/design (micro level estimating). The difference between the two roles is that the former is performed at the end of various lifecycle stages, whereas the latter is performed at any suitable time during planning/design.

Concurrent multi-scale modeling of civil infrastructures for analyses on structural deterioration—Part I : Modeling methodology and strategy

This paper aims to develop the methodology and strategy for concurrent finite element modeling of civil infrastructures at the different scale levels for the purposes of analyses of structural deteriorating. The modeling strategy and method were investigated to develop the concurrent multi-scale model of structural behavior (CMSM-of-SB) in which the global structural behavior and nonlinear damage features of local details in a large complicated structure could be concurrently analyzed in order to meet the needs of structural-state evaluation as well as structural deteriorating. In the proposed method, the “large-scale” modeling is adopted for the global structure with linear responses between stress and strain and the “small-scale” modeling is available for nonlinear damage analyses of the local welded details. A longitudinal truss in steel bridge decks was selected as a case to study how a CMSM-of-SB was developed. The reduced-scale specimen of the longitudinal truss was studied in the laboratory to measure its dynamic and static behavior in global truss and local welded details, while the multi-scale models using constraint equations and substructuring were developed for numerical simulation. The comparison of dynamic and static response between the calculated results by different models indicated that the proposed multi-scale model was found to be the most efficient and accurate. The verification of the model with results from the tested truss under the specific loading showed that, responses at the material scale in the vicinity of local details as well as structural global behaviors could be obtained and fit well with the measured results. The proposed concurrent multi-scale modeling strategy and implementation procedures were applied to Runyang cable-stayed bridge (RYCB) and the CMSM-of-SB of the bridge deck system was accordingly constructed as a practical application.

Concurrent multi-scale modeling of civil infrastructures for analyses on structural deteriorating—Part II : Model updating and verification

This paper is a continuation of the paper titled “Concurrent multi-scale modeling of civil infrastructure for analyses on structural deteriorating—Part I: Modeling methodology and strategy” with the emphasis on model updating and verification for the developed concurrent multi-scale model. The sensitivity-based parameter updating method was applied and some important issues such as selection of reference data and model parameters, and model updating procedures on the multi-scale model were investigated based on the sensitivity analysis of the selected model parameters. The experimental modal data as well as static response in terms of component nominal stresses and hot-spot stresses at the concerned locations were used for dynamic response- and static response-oriented model updating, respectively. The updated multi-scale model was further verified to act as the baseline model which is assumed to be finite-element model closest to the real situation of the structure available for the subsequent arbitrary numerical simulation. The comparison of dynamic and static responses between the calculated results by the final model and measured data indicated the updating and verification methods applied in this paper are reliable and accurate for the multi-scale model of frame-like structure. The general procedures of multi-scale model updating and verification were finally proposed for nonlinear physical-based modeling of large civil infrastructure, and it was applied to the model verification of a long-span bridge as an actual engineering practice of the proposed procedures.

Can B.I.M be civil?

After many years of development BIM (Building Information Modelling) is starting to achieve significant penetration into the building sector of the construction industry. This paper describes the current status of BIM and the drivers that are motivating the change from 2D CAD to BIM within the building sector. The paper then discusses what the implications of the technology underlying BIM may be for the civil construction sector of the construction industry. A project carried out by the Cooperative Research Centre for Construction Innovation is used as an example of this technology as well as several international examples.

Multi-objective mission flight planning in civil unmanned aerial systems

Unmanned Aerial Vehicles (UAVs) are emerging as an ideal platform for a wide range of civil applications such as disaster monitoring, atmospheric observation and outback delivery. However, the operation of UAVs is currently restricted to specially segregated regions of airspace outside of the National Airspace System (NAS). Mission Flight Planning (MFP) is an integral part of UAV operation that addresses some of the requirements (such as safety and the rules of the air) of integrating UAVs in the NAS. Automated MFP is a key enabler for a number of UAV operating scenarios as it aids in increasing the level of onboard autonomy. For example, onboard MFP is required to ensure continued conformance with the NAS integration requirements when there is an outage in the communications link. MFP is a motion planning task concerned with finding a path between a designated start waypoint and goal waypoint. This path is described with a sequence of 4 Dimensional (4D) waypoints (three spatial and one time dimension) or equivalently with a sequence of trajectory segments (or tracks). It is necessary to consider the time dimension as the UAV operates in a dynamic environment. Existing methods for generic motion planning, UAV motion planning and general vehicle motion planning cannot adequately address the requirements of MFP. The flight plan needs to optimise for multiple decision objectives including mission safety objectives, the rules of the air and mission efficiency objectives. Online (in-flight) replanning capability is needed as the UAV operates in a large, dynamic and uncertain outdoor environment. This thesis derives a multi-objective 4D search algorithm entitled Multi- Step A* (MSA*) based on the seminal A* search algorithm. MSA* is proven to find the optimal (least cost) path given a variable successor operator (which enables arbitrary track angle and track velocity resolution). Furthermore, it is shown to be of comparable complexity to multi-objective, vector neighbourhood based A* (Vector A*, an extension of A*). A variable successor operator enables the imposition of a multi-resolution lattice structure on the search space (which results in fewer search nodes). Unlike cell decomposition based methods, soundness is guaranteed with multi-resolution MSA*. MSA* is demonstrated through Monte Carlo simulations to be computationally efficient. It is shown that multi-resolution, lattice based MSA* finds paths of equivalent cost (less than 0.5% difference) to Vector A* (the benchmark) in a third of the computation time (on average). This is the first contribution of the research. The second contribution is the discovery of the additive consistency property for planning with multiple decision objectives. Additive consistency ensures that the planner is not biased (which results in a suboptimal path) by ensuring that the cost of traversing a track using one step equals that of traversing the same track using multiple steps. MSA* mitigates uncertainty through online replanning, Multi-Criteria Decision Making (MCDM) and tolerance. Each trajectory segment is modeled with a cell sequence that completely encloses the trajectory segment. The tolerance, measured as the minimum distance between the track and cell boundaries, is the third major contribution. Even though MSA* is demonstrated for UAV MFP, it is extensible to other 4D vehicle motion planning applications. Finally, the research proposes a self-scheduling replanning architecture for MFP. This architecture replicates the decision strategies of human experts to meet the time constraints of online replanning. Based on a feedback loop, the proposed architecture switches between fast, near-optimal planning and optimal planning to minimise the need for hold manoeuvres. The derived MFP framework is original and shown, through extensive verification and validation, to satisfy the requirements of UAV MFP. As MFP is an enabling factor for operation of UAVs in the NAS, the presented work is both original and significant.

Beyond charity : outlines of a jurisprudence for civil society

There is not a single, coherent, jurisprudence for civil society organisations. Pressure for a clearly enuciated body of law applying to the whole of this sector of society continues to increase. The rise of third sector scholarship, the retreat of the welfare state, the rediscovery of the concept of civil society and pressures to strengthen social capital have all contributed to an ongoing stream of inquiry into the laws that regulate and favour civil society organisations. There have been almost thirty inquiries over the last sixty years into the doctrine of charitable purpose in common law countries. Those inquiries have established that problems with the law applying to civil society organisations are rooted in the common law adopting a ‘technical’ definition of charitable purpose and the failure of this body of law to develop in response to societal changes. Even though it is now well recognised that problems with law reform stem from problems inherent in the doctrine of charitable purpose, statutory reforms have merely ‘bolted on’ additions to the flawed ‘technical’ definition. In this way the scope of operation of the law has been incrementally expanded to include a larger number of civil society organisations. This piecemeal approach continues the exclusion of most civil society organisations from the law of charities discourse, and fails to address the underlying jurisprudential problems. Comprehensive reform requires revisiting the foundational problems embedded in the doctrine of charitable purpose, being informed by recent scholarship, and a paradigm shift that extends the doctrine to include all civil society organisations. Scholarly inquiry into civil society organisations, particularly from within the discipline of neoclassical economics, has elucidated insights that can inform legal theory development. This theory development requires decoupling the two distinct functions performed by the doctrine of charitable purpose which are: setting the scope of regulation, and determining entitlement to favours, such as tax exemption. If the two different functions of the doctrine are considered separately in the light of theoretical insights from other disciplines, the architecture for a jurisprudence emerges that facilitates regulation, but does not necessarily favour all civil society organisations. Informed by that broader discourse it is argued that when determining the scope of regulation, civil society organisations are identified by reference to charitable purposes that are not technically defined. These charitable purposes are in essence purposes which are: Altruistic, for public Benefit, pursued without Coercion. These charitable puposes differentiate civil society organisations from organisations in the three other sectors namely; Business, which is manifest in lack of altruism; Government, which is characterised by coercion; and Family, which is characterised by benefits being private not public. When determining entitlement to favour, it is theorised that it is the extent or nature of the public benefit evident in the pursuit of a charitable purpose that justifies entitlement to favour. Entitlement to favour based on the extent of public benefit is the theoretically simpler – the greater the public benefit the greater the justification for favour. To be entitled to favour based on the nature of a purpose being charitable the purpose must fall within one of three categories developed from the first three heads of Pemsel’s case (the landmark categorisation case on taxation favour). The three categories proposed are: Dealing with Disadvantage, Encouraging Edification; and Facilitating Freedom. In this alternative paradigm a recast doctrine of charitable purpose underpins a jurisprudence for civil society in a way similar to the way contract underpins the jurisprudence for the business sector, the way that freedom from arbitrary coercion underpins the jurisprudence of the government sector and the way that equity within families underpins succession and family law jurisprudence for the family sector. This alternative architecture for the common law, developed from the doctrine of charitable purpose but inclusive of all civil society purposes, is argued to cover the field of the law applying to civil society organisations and warrants its own third space as a body of law between public law and private law in jurisprudence.