Obtenção de compósitos nanoestruturados PSU/nanotubos de carbono pela técnica de eletrofiação

The nanostructured materials over the last decade have been increasing the variety of studies and research applications in many industries. From the understanding and manipulation of nanoscale is possible to obtain high-performance materials. One method, which has been very effective in obtaining of nanostructured composites, is the electrospinning, a technique that uses electrostatic forces to produce fibers from a polymer solution. By understanding and controlling of process conditions, such as solution viscosity, working distance, the velocity of the collector, applied voltage and others conditions, it is possible to obtain fibers in many different morphologies. This work aims to obtain nanostructured composites from polysulfone (PSU) a thermoplastic polymer with high oxidation resistance and good mechanical strength at high temperatures and carbon nanotubes (CNTs) that are excellent reinforcements for polymer materials, their mechanical resistance is greater than that of all known materials; using the electrospinning process via polymer solution. Were used polysulfone solutions, n,n-ndimetil acetamide (PSU / DMAc) and this same solution added of CNTs in order to obtain the nanofibers. In both cases were analyzed the effectiveness of the process from the analysis of fiber diameters, rheological behavior and infrared spectroscopy. The results obtained confirmed the efficiency of the electrospinning process to obtain polymeric fibers

Estudo da velocidade de despassivação de aços em estruturas de concreto armado, em meio de cloreto

The aim of the present study was to investigate the corrosion resistance in chloride medium of two cylindrical steel samples from civil construction (CA-50 and CA-60). For this purpose, electrochemical measurements were performed in NaCl solution, 4.0 g/L, naturally aerated. According to electrochemical responses, it was observed an active dissolution process at open circuit potential for both steels. In this comparative study, the differences between CA-50 and CA60 were not significant, since the values of polarization resistance estimated by EIS were the same order of magnitude for both types of steel (oscillating between 200 and 500 Ohm). For all evaluated thicknesses of concrete reinforcement, these values ranged between 2 and 9 kOhm, and the lower value was associated with lower thickness, particularly at 7, 21 and 35 days. When these results were compared with those determined for the CA-60, it was found that the layer of concrete reinforcement provide a protection against corrosion in chloride medium at least ten times larger

Desenvolvimento de sistema eletrônico para instrumentar um DPL em ensaio dinâmico de resistência do solo

Pós-graduação em Engenharia Elétrica - FEIS

Utilização de metaheurísticas combinada a diferentes métodos de aglutinação para a otimização de um processo de torneamento com múltiplas respostas

Pós-graduação em Engenharia Mecânica - FEG

Metodologia de simulação numérica do comportamento térmico em equipamentos eletroeletrônicos

Pós-graduação em Engenharia Elétrica - FEIS

A articulação do quadril em uma perspectiva preditora da velocidade de marcha em idosas e como foco de intervenção de duas modalidades terapêuticas: Método Pilates e Haste Vibratória

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise experimental da resistência à corrosão e da velocidade de corrosão: uma proposta pedagógica

In this work it is proposed the use of a chemical activity, in which a corrosion process occurs, aiming to provide to the student relationship among the learning concepts and corrosion phenomena that occur everyday. It is suggested that the experiment development is based on Vygotsky theory, so that students work in groups, which may facilitate social interaction among students and results discussion among groups under professor guidance. This proposal can provide the involved concepts learning, as well as student training such as a critical and reflexive individual.

Relacionamento entre as variáveis da corrida de aproximação e da posição de pé de apoio com a velocidade da bola nos chutes com o membro dominante e não dominante

The aim of the study was to analyze the relationship between run-up spatial-temporal variables with ball velocity in the dominant and non-dominant kicks, and to compare the ball velocity between contralateral limbs. Six futsal players (aged 13 and 14 years) participated in the study. The participants performed 4 kicks with maximal velocity in the stationary ball with each limb. Participants’ movements were recorded by 4 digital cameras (120 Hz). Dvideow software was used for kinematic procedures. The variables analyzed were: length and width of the last but one step and last step before ball contact, distance of the support foot to the ball, run-up velocity and ball velocity. The relationship between spatial-temporal variables with the ball velocity was analyzed by linear regressions with ball velocity as dependent variable. Student t test for paired samples was used to compare ball velocity between dominant and non-dominant kicks. For the dominant limb, the ball velocity was predicted only by the run-up velocity in 16.7%, while for the non-dominant limb only the distance of the support foot to the ball was prognostic variable in 11.9%. The ball velocity was greater for the dominant limb. Run-up variables that predictive ball velocity were different between the dominant and non-dominant kicks.

Relação dos saltos vertical, horizontal e sêxtuplo com a agilidade e velocidade em crianças

The aim of the present study were: 1) To verify the relationship of vertical, horizontal and sextuple jumps with agility and velocity of 5, 10 and 25 m; 2) To verify the capacity of these jumps to predict the agility and 5, 10 and 25 m velocity performance in children. Twenty eight boys (9.47 ± 0.64 years) and thirty girls (9.69 ± 0.70 years) were evaluated. The correlation values between agility and velocity on 5, 10 and 25 m velocity were, respectively, r = 0.63, 0.51, 0.44 and 0.64 with vertical jump, r = 0.68, 0.62, 0.28 and 0.62 with sextuple jump, and r = 0.60, 0.50, 0.26 and 0.57 with horizontal jump. The vertical and sextuple jumps were able to predict the agility and 25 m velocity performance (p < 0.05). Furthermore, they demonstrated capacity to predict 5 and 10 m velocity, respectively (p < 0.05). The vertical and sextuple jump tests may be used for assessment and control of training with children practicing activities that require agility and velocity, since both jumps predicted the agility and velocity performance, which did not occur with the horizontal jump.

Influência da deformação a frio na recristalização da liga Ti-30Ta para aplicações médicas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cálculo em elementos finitos das frequências naturais dos modos de flexão de uma linha de eixo de unidade geradora hidráulica em escala

Pós-graduação em Engenharia Mecânica - FEG

Efeito dos parâmetros de retificação no acabamento superficial de cerâmicas aplicadas à biomateriais

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Características fenotípicas do nanismo em pôneis neonatos: relato de casos

Three newborn Mini-Horses and one Brazilian Pony horses were presented to the Veterinary Hospital with phenotypic appearance of dwarfism. They had relatively larger head conformation, occlusive dental defect and musculoskeletal changes such as abnormal short limbs and deformation on the third metatarsal bone. The radiographic examination showed abnormal growth plates on femoral condyle and proximal thirds metatarsal bones. Due to the high possibility of future complications and quality of life loss, the animals were euthanized. We emphasize the importance of recognition of phenotypic changes related to dwarfism in horses, enabling the phenotypic diagnosis can direct crossings for nontransmission of this abnormality as genetic inheritance.

Efeito imediato do método de secagem na qualidade de sementes de crambe

Crambe (Crambe abyssinica Hochst) seeds have high oil contents and its growth in Brazil aims to produce bio diesel. The crambe seeds production and commercialization began a few years ago. Research in technology production is essential and it is also important to use high quality seeds regardless of the technological level employed in the crop production. One of the factors that affect seed quality there is the drying process. Seed drying performed properly can reduce seed moisture content for storage without decrease in its qualitative characteristics. The aim of this study was to evaluate the immediate effect of natural and artificial drying methods (using heated and unheated air) on crambe seeds quality. The seeds were produced at Fazenda Lageado, Faculdade de Ciências Agronômicas, UNESP, Botucatu/SP, on April 2009. Seeds were submitted to the following drying methods: a) seed drying in the shade with natural ventilation; b) artificial drying method using heated air; c) artificial drying method using unheated air; d) drying on ceramic patio; e) drying on the mother plant. The seeds were evaluated immediately after drying. The following tests were performed: seed moisture content; standard germination; first count of germination; seedling emergence; emergence speed index and electrical conductivity. The experimental design was randomized blocks and the data obtained was subjected to analysis of variance, worth means being compared by Tukey test at 5% probability. There was no significant difference among drying treatments in relation to: germination rate, first count of germination, electrical conductivity, seedling emergence and emergence speed index. The highest percentage of abnormal seedlings was obtained on treatment with heated air drying. The drying on the mother plant method showed the lower percentage of dead seeds. The drying methods studied did not cause an immediate effect on crambe seeds quality, which showed high percentage of dormant seeds post-harvest.

Qualidade da operação de semeadura de uma semeadora adubadora de plantio direto em função do tipo de martelete e velocidade de deslocamento

The current paper had as its objective to analyze the precision planter's operational performance according to five different displacement velocities and two types of jumpers for planting no-tillage corn. The utilized experimental delineation consisted of blocks at random with parcels subdivided in factorial scheme 2x5, two types of jumpers (4 and 5 staples) and five different displacement velocities (3.0; 4.5; 5.0; 7.0 e 9.0 km h-1) with four repetitions and by applying the average comparation test, as for the jumpers effects as for the displacement velocities effects, to the significance level of 5%. It was evaluated the data concerned to the longitudinal distribution of plants, average number of days for the emergence of seedlings, initial and final stand of plants, survival indices, mechanical harm on seeds, germination tests and grain production. It was also observed the planter displacement velocity effect of on variables as: longitudinal distribution of plants, average number of days for the emergence of seedlings, initial and final stand of plants, mechanical harm and yield. The survival indice of plants were high for all the studied velocities and jumpers. Among the studied velocities, the one of 5.0 km h-1 presented the highest yield to both types of jumpers.