Detection of viable and viable nonculturable Vibrio cholerae O1 through cultures and immunofluorescence in the Tucumán rivers, Argentina

Vibrio cholerae has been sporadically isolated from rivers in Tucumán, Argentina, since the outbreak in 1991. The aim of this study was to determine the environmental reservoir of the bacterium in these rivers, assessing the presence of Vibrio cholerae non-O1 and O1 (the latter both in its viable culturable and non culturable state) and its relationship to environmental physicochemical variables. 18 water samplings were collected in the Salí River (in Canal Norte and Banda) and the Lules River between 2003 and 2005. Physical-chemical measurements (pH, water temperature, electrical conductivity and dissolved oxygen) were examined. Vibrio cholerae was investigated with conventional culture methods and with Direct Immunofluorescence (DFA-VNC) in order to detect viable non culturable organisms. All isolated microorganisms corresponded to Vibrio cholerae non-O1 and non-O139 (Lules 26%, Canal Norte 33% and Banda 41%). The majority was found during spring and summer and correlated with temperature and pH. Non culturable Vibrio cholerae O1 was detected year round in 38 of the 54 water samples analyzed. Application of the Pearson correlation coefficient revealed that there was no relationship between positive immunofluorescence results and environmental physicochemical parameters. Genes coding for somatic antigen O1 were confirmed in all DFA-VNC-positive samples, whereas the virulence-associated ctxA and tcpA genes were confirmed in 24 samples.

Archaeometallurgical study of the Proto-historic collection of Moinhos de Golas (North Portugal): a forecast for technological changes?

This work presents the archaeometallurgical study of a group of metallic artefacts found in Moinhos de Golas site, Vila Real (North of Portugal), that can generically be attributed to Proto-history (1st millennium BC, Late Bronze Age and Iron Age). The collection is composed by 35 objects: weapons, ornaments and tools, and others of difficult classification, as rings, bars and one small thin bent sheet. Some of the objects can typologically be attributed to Late Bronze Age, others are of more difficult specific attribution. The archaeometallurgical study involved x-ray digital radiography, elemental analysis by micro-energy dispersive X-ray fluorescence spectrometry and scanning electron microscopy with energy dispersive spectroscopy, microstructural observations by optical microscopy and scanning electron microscopy. The radiographic images revealed structural heterogeneities frequently related with the degradation of some artefacts and the elemental analysis showed that the majority of the artefacts was produced in a binary bronze alloy (Cu-Sn) (73%), being others produced in copper (15%) and three artefacts in brass (Cu-Zn(-Sn-Pb)). Among each type of alloy there’s certain variability in the composition and in the type of inclusions. The microstructural observations revealed that the majority of the artefacts suffered cycles of thermo-mechanical processing after casting. The diversity of metals/alloys identified was a discovery of great interest, specifically due to the presence of brasses. Their presence can be interpreted as importations related to the circulation of exogenous products during the Proto-history and/or to the deposition of materials during different moments at the site, from the transition of Late Bronze Age/Early Iron Age (Orientalizing period) onwards, as during the Roman period.

Characterization of a new coagulase-negative Staphylococcus species (Staphylococcus pettenkoferi) isolated from blood cultures from a hospitalized patient in Porto Alegre, Brazil

INTRODUCTION: Staphylococcus pettenkoferi was originally isolated and described by Trülzsch et al (2002). In this study, we characterized two isolates of this newly described species. METHODS: Blood cultures were initially processed using the BacT/ALERT® device, and the isolates were initially characterized using the Vitek2 identification system. RESULTS: The initial characterization revealed slow-growing Gram-positive cocci that formed opaque colonies on sheep blood agar. Other phenotypic/genotypic tests were performed. CONCLUSIONS: We would like to emphasize that this new staphylococcus species is phenotypically similar to other CoNS, especially S. auricularis. This could potentially lead to misidentification of these uncommon species.

Improving tuberculosis control through the partnership between university and the health system

INTRODUCTION: Tuberculosis (TB) control is linked to the availability of qualified methods for microbiological diagnostics; however, microscopy with limited sensitivity is the only method available in many locations. The objective of this study was to evaluate the introduction of culture, drug susceptibility testing (DST), and genotyping in the routine of a Municipal Program of Tuberculosis Control. METHODS: Direct microscopy of sputum and culture in Ogawa-Kudoh were performed on 1,636 samples from 787 patients. DST of positive cultures was performed by resazurin microtiter assay and genotyping by mycobacterial interspersed repetitive units-variable number tandem repeat. RESULTS: A total 91 patients with TB were identified. The culture increased case detection by 32% compared with the microscopy; acquired resistance was 3.3% and the genotyping showed high genetic diversity. CONCLUSIONS: Ogawa-Kudoh contributed significantly to the increase in case detection and is suitable for implementation in poor-resource locations. The acquired resistance rate was lower than that reported in a recent Brazilian survey. The high genetic diversity is possibly related to the high TB prevalence in the population, as well as to early detection and suitable treatment of patients. The interaction between research and health care is important for reorienting the practice, transferring technology, and improving TB control.

A description of the Australian early psychosis intervention model and a proposal to establish a Pilot Early Intervention Program in Santa Cruz de la Sierra, Bolívia

RESUMO: Em 2011, a Associação Psiquiátrica Mundial lançou um programa de bolsas de investigação para psiquiatras em início de carreira a partir de países de renda baixa ou média-baixa, no âmbito deste programa, o autor foi selecionado para uma bolsa de pesquisa no Centre for Youth Mental Health/Orygen Youth Health Research Centre da Universidade de Melbourne. Orygen, é a principal organização de pesquisa e tradução do conhecimento do mundo com foco em problemas de saúde mental em pessoas jovens. O estágio foi baseado em Prevenção e Intervenção Precoce Psychosis Centre (EPPIC), que faz parte do Orygen. EPPIC fornece programa de tratamento abrangente e integrada, baseada na comunidade para o primeiro episódio de psicose. Esta dissertação descreve o modelo EPPIC, e seus componentes essenciais e fatores que são necessários para uma implementação de serviço direito. Além disso, uma proposta de criação de um programa-piloto de intervenção psicose precoce é discutido. Este programa inclui um programa de extensão inovadora que combina princípios comerciais sólidos, com metas sociais, a fim de combater especificamente a maior barreira para o tratamento da psicose precoce na Bolívia: o estigma da doença mental. Ao utilizar uma equipe de tratamento móvel, multidisciplinar, que enfatiza os papéis dos gerentes do caso treinados focada em fornecer indivíduo intensiva e apoio familiar no lar, este programa irá prestar cuidados culturalmente apropriados que irá alavancar contribuições de um suprimento limitado de psiquiatras e mudar longe da dependência um sistema médico fragmentado. ---------------------------- ABSTRACT: In 2011, the World Psychiatric Association launched a programme of research fellowships for early-career psychiatrists from low- or lower-middle income countries, within this programme, the author was selected to a research fellowship at the Centre for Youth Mental Health/Orygen Youth Health Research Centre at University of Melbourne. Orygen, is the world’s leading research and knowledge translation organization focusing on mental ill-health in young people. The traineeship was based on Early Psychosis Prevention and Intervention Centre (EPPIC), which is part of Orygen. EPPIC provides comprehensive, integrated, community-based treatment program for first-episode psychosis. This dissertation describes the EPPIC model, and its core components and factors which are necessary to a right service implementation. Additionally, a proposal to establish a pilot early psychosis intervention programme is discussed. This programme includes an innovative outreach programme that combines sound business principals with social goals in order to specifically target the largest barrier to early psychosis treatment in Bolivia: the stigma of mental illness. By utilizing a mobile, multidisciplinary treatment team that emphasizes the roles of trained case managers focused on providing intensive individual and family support in the home, this programme will provide culturally appropriate care that will leverage contributions from a limited supply of psychiatrists and shift dependence away from a fragmented medical system.

Do hospitals react to random demand pressure by early discharges?

This project tries to assess whether hospitals react to random demand pressure by discharging patients earlier than expected. As a matter of fact, combining an unpredictable demand for medical services with limited and, to some extent, fixed medical resources, generates strong incentives to discharge patients earlier than expected when demand is high − increasing the risk of readmission and decreasing the benefit from treatment. This work was conducted as a way to determine whether those incentives actually affect discharging decisions. Analysis of Portuguese hospitals data shows that hospital utilization levels at the time of admission, prior to the admission and post admission do have a negative impact over the length of stay in hospital, although this impact is quantitatively irrelevant. More than that, larger utilization levels have a positive impact over the probability of being discharged at certain days of the week, indicating that an early discharges problem may exist.

Impact of carbon/nitrogen feeding strategy on polyhydroxyalkanoates production using mixed microbial cultures

Polyhydroxyalkanoates (PHA) production using mixed microbial cultures (MMC) requires a multi-stage process involving the microbial selection of PHA-storing microorganisms, typically operated in sequencing batch reactors (SBR), and an accumulation reactor. Since low-cost renewable feedstocks used as process feedstock are often nitrogen-deficient, nutrient supply in the selection stage is required to allow for microbial growth. In this context, the possibility to uncouple nitrogen supply from carbon feeding within the SBR cycle has been investigated in this study. Moreover, three different COD:N ratios (100:3.79, 100:3.03 and 100:2.43) were tested in three different runs which also allowed the study of COD:N ratio on the SBR performance. For each run, a synthetic mixture of acetic and propionic acids at an overall organic load rate of 8.5 gCOD L-1 d-1 was used as carbon feedstock, whereas ammonium sulfate was the nitrogen source in a lab-scale sequence batch reactor (SBR) with 1 L of working volume. Besides, a sludge retention time (SRT) of 1 d was used as well as a 6 h cycle length. The uncoupled feeding strategy significantly enhanced the selective pressure towards PHA-storing microorganisms, resulting in a two-fold increase in the PHA production (up to about 1.3 gCOD L-1). A high storage response was observed for the two runs with the COD:N ratios (gCOD:gN) of 100:3.79 and 100:3.03, whereas the lowest investigated nitrogen load resulted in very poor performance in terms of polymer production. In fact, strong nitrogen limitation caused fungi to grow and a very poor storage ability by microorganisms that thrived in those conditions. The COD:N ratio also affected the polymer composition, indeed the produced poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) showed a variable HV content (1-20 %, w/w) among the three runs, lessening as the COD:N increased. This clearly suggests the possibility to use the COD:N ratio as a tool for tuning polymer properties regardless the composition of the feedstock.

Severe dengue in the early postoperative period after kidney transplantation: two case reports from Hospital Geral de Fortaleza

Abstract: Dengue is an arbovirosis that ranges from an asymptomatic presentation to a more severe disease, which is characterized by a vascular leakage syndrome where abdominal pain is a major symptom. Transplant recipients are immunosuppressed and are less likely to develop a severe form of the disease because of a reduction in immune-mediated responses that trigger plasma extravasation events. Herein, we report two cases of severe dengue in the early postoperative period of two kidney transplant recipients. Considering the severity of the cases, we emphasize the importance of dengue screening immediately before transplantation in areas endemic for the disease.

The BACTEC MGIT(tm) 320 system as a laboratory tool to diagnose tuberculosis in a Brazilian hospital with a high prevalence of HIV infection

Abstract: INTRODUCTION: The World Health Organization endorses the BACTEC Mycobacterial Growth Indicator Tube (MGIT)(tm) system as a rapid, sensitive, and specific method to diagnostic of tuberculosis. Here, we compared the performance of this system against Ogawa-Kudoh cultures and microscopy. METHODS: A total of 927 samples were obtained between December 2011 and December 2013 from 652 cases of suspected tuberculosis at the School Hospital of the Federal University of Rio Grande in Brazil. RESULTS: The MGIT system confirmed tuberculosis in more cases in less time. CONCLUSIONS: The MGIT system is an effective tool for early diagnosis of tuberculosis, especially in patients with HIV/AIDS.

Improving the early diagnostic of prostate cancer by multiple biomarker detection with new biosensing devices

Prostate cancer (PCa) is the most common form of cancer in men, in Europe (World Health Organization data). The most recent statistics, in Portuguese territory, confirm this scenario, which states that about 50% of Portuguese men may suffer from prostate cancer and 15% of these will die from this condition. Its early detection is therefore fundamental. This is currently being done by Prostate Specific Antigen (PSA) screening in urine but false positive and negative results are quite often obtained and many patients are sent to unnecessary biopsy procedures. This early detection protocol may be improved, by the development of point-of-care cancer detection devices, not only to PSA but also to other biomarkers recently identified. Thus, the present work aims to screen several biomarkers in cultured human prostate cell lines, serum and urine samples, developing low cost sensors based on new synthetic biomaterials. Biomarkers considered in this study are the following: prostate specific antigen (PSA), annexin A3 (ANXA3), microseminoprotein-beta (MSMB) and sarcosine (SAR). The biomarker recognition may occurs by means of molecularly imprinted polymers (MIP), which are a kind of plastic antibodies, and enzymatic approaches. The growth of a rigid polymer, chemically stable, using the biomarker as a template allows the synthesis of the plastic antibody. MIPs show high sensitivity/selectivity and present much longer stability and much lower price than natural antibodies. This nanostructured material was prepared on a carbon solid. The interaction between the biomarker and the sensing-material produces electrical signals generating quantitative or semi-quantitative data. These devices allow inexpensive and portable detection in point-of-care testing.

The early metallurgy in Southwestern Iberia: metals from the Chalcolithic Settlement of São Pedro (Redondo)

Archaeological excavations carried out in the archaeological site of São Pedro (Southern Portugal) revealed a Chalcolithic settlement occupied in different moments of the 3rd millennium BC. The material culture recovered includes different types of materials, such as ceramics, lithics and metals. The later comprises about 30 artefacts with different typologies such as tools (e.g. awls, chisels and a saw) and weapons (e.g. daggers and arrowheads) mostly belonging to the 2nd and 3rd quarter of the 3rd millennium BC. In the present work the collection of chalcolithic metallic artefacts recovered in São Pedro was characterized. Analytical studies involved micro energy dispersive X-ray fluorescence spectrometry (micro-EDXRF) to determine elemental composition, together with optical microscopy and Vickers microhardness testing for microstructural characterisation and hardness determination. Main results show copper with variable amounts of arsenic and very low content of other impurities, such as iron. Moreover, nearly half of the collection is composed by arsenical copper alloys (As > 2 wt.%) and an association was found between arsenic content and typology since the weapons group (mostly daggers) present higher values than tools (mostly awls). These results suggest some criteria in the selection of arsenic-rich copper ores or smelting products. Furthermore, after casting an artefact would have been hammered, annealed and sometimes, finished with a hammering operation. Additionally, microstructural variations in this collection reveal somewhat different operational conditions during casting, annealing and forging, as expected in such a primitive metallurgy. Moreover the operational sequence seems to be used to achieve the required shape to the object, rather than to intentionally make the alloy harder. Overall, this study suggests that Chalcolithic metallurgists might have a poor control of the addition of arsenic and/or were unable to use this element to increase the hardness of tools and weapons. Finally, the compositions, manufacturing processes and hardness were compared to those from neighbouring regions and different chronological periods.

Polyhydroxyalkanoates production by photosynthetic mixed cultures

Polyhydroxyalkanoates (PHAs) are natural biologically synthesized polymers that have been the subject of much interest in the last decades due to their biodegradability. Thus far, its microbial production is associated with high operational costs, which increases PHA prices and limits its marketability. To address this situation, this thesis’ work proposes the utilization of photosynthetic mixed cultures (PMC) as a new PHA production system that may lead to a reduction in operational costs. In fact, the operational strategies developed in this work led to the selection of PHA accumulating PMCs that, unlike the traditional mixed microbial cultures, do not require aeration, thus permitting savings in this significant operational cost. In particular, the first PHA accumulating PMC tested in this work was selected under non-aerated illuminated conditions in a feast and famine regime, being obtained a consortium of bacteria and algae, where photosynthetic bacteria accumulated PHA during the feast phase and consumed it for growth during the famine phase, using the oxygen produced by algae. In this symbiotic system, a maximum PHA content of 20% cell dry weight (cdw) was reached, proving for the first time, the capacity of a PMC to accumulate PHA. During adaptation to dark/light alternating conditions, the culture decreased its algae content but maintained its viability, achieving a PHA content of 30% cdw. Also, the PMC was found to be able to utilize different volatile fatty acids for PHA production, accumulating up to 20% cdw of a PHA co-polymer composed of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (HV) monomers. Finally, a new selective approach for the enrichment of PMCs in PHA accumulating bacteria was tested. Instead of imposing a feast and famine regime, a permanent feast regime was used, thus selecting a PMC that was capable of simultaneously growing and accumulating PHA, being attained a maximum PHA content of 60% cdw, the highest value reported for a PMC thus far. The results presented in this thesis prospect the utilization of cheap, VFA-rich fermented wastes as substrates for PHA production, which combined with this new photosynthetic technology opens up the possibility for direct sunlight illumination, leading to a more cost-effective and environmentally sustainable PHA production process.

Reinvigorating and redesigning early intervention in psychosis services for young people in Auckland

RESUMO: Auckland tem sido pioneira na implementação de modelos de Intervenção Precoce em Psicose. No entanto, esta organização do serviço não mudou nos últimos 19 anos. Segundo os dados obtidos da utilização do serviço, no período de 1996 -2012 foram atendidos 997 doentes, que tinham um número médio de 89 contactos (IQR: 36-184), com uma duração média de 62 horas de contactos (IQR: 24-136). Estes doentes passaram um número médio de 338 dias (IQR: 93-757) em contacto com o programa. 517 doentes (52%) não necessitaram de internamento no hospital, e os que foram internados, ficaram uma mediana de 124 dias no hospital (IQR: 40-380). Os doentes asiáticos tiveram um aumento de 50% de probabilidade de serem internados no hospital. Este relatório inclui 15 recomendações para orientar as reformas para o serviço e, nomeadamente, delinear a importância de uma visão organizacional e dos seus componentes-chave. As recomendações incluem o reforço da gestão e da liderança numa estrutura de equipe mais integrada, com recursos dedicados a melhorar a consciencialização da comunidade, a educação e deteção precoce, bem como a capacidade de receber referenciações diretas. Os Indicadores Chave de Desempenho devem ser estabelecidos, mas os Exames de Estado Mental em risco, devem ser removidos. Auckland deve manter a faixa etária alvo atual. A duração do serviço deve ser aumentada para um mínimo de três anos, com a opção de aumentá-la para cinco anos. A proporção de gestor de cuidados para os doentes deve ser preconizada em 1:15, enquanto o pessoal de apoio não-clínico deve ser aumentado. Os psiquiatras devem ter uma carga de trabalho de cerca de 80 doentes por equivalente de tempo completo. Um serviço local de prestação de cuidados deve ser desenvolvido com, nomeadamente, intervenções culturais para responder às necessidades da população multicultural de Auckland. A capacidade de investigação deve ser incorporada no Serviço de Intervenção Precoce em Psicoses. Qualquer alteração deverá envolver contacto com todas as partes interessadas, e a Administração Regional de Saúde deve comprometer-se em tempo, recursos humanos e políticos para apoiar e facilitar a mudança do sistema, investindo de forma significativa para melhor servir a comunidade Auckland.----------------------------------- ABSTRACT: Auckland has been pioneering in the adoption of Early Intervention in Psychosis models but the design of the service has not changed in 19 years. In service utilisation data from 997 patients seen from 1996 -2012, patients had a median number of 89 contacts (IQR: 36-184), with a median duration of 62 hours of contact (IQR: 24-136). Patients spent a median number of 338 days (IQR: 93-757) in contact with the program. 517 patients (52%) did not require admission to hospital, and those who did spent a median of 124 days in hospital (IQR: 40-380). Asian patients had a 50% increased chance of being admitted to hospital. This report includes 15 recommendations to guide reforms to the service, including outlining the importance of vision and key components. It recommends strengthened managerial leadership and a more integrated team structure with dedicated resources for improved community awareness, education and early detection as well as the capacity to take direct referrals. Key Performance Indicators (KPIs) should be established but At Risk Mental States should be excluded. Auckland should maintain the current target age range. The duration of service should be increased to a minimum of three years, with the option to extend this to five years. The ratio of care co-ordinator to patients should be capped at 1:15 whilst non-clinical supporting staff should be increased. Psychiatrists should have a caseload of about 80 per FTE. A local Service Delivery framework should be developed, as should cultural interventions to meet the needs of the multicultural population of Auckland. Research capacity should be incorporated into the fabric of Early Intervention in Psychosis Services. Any changes should involve consultation with all stakeholders, and the DHB should commit to investing time, human and political resources to support and facilitate meaningful system change to best serve the Auckland community.

Bone turnover markers for early detection of fracture healing disturbances: A review of the scientific literature

Imaging techniques are the standard method for assessment of fracture healing processes. However, these methods are perhaps not entirely reliable for early detection of complications, the most frequent of these being delayed union and non-union. A prompt diagnosis of such disorders could prevent prolonged patient distress and disability. Efforts should be directed towards the development of new technologies for improving accuracy in diagnosing complications following bone fractures. The variation in the levels of bone turnover markers (BTMs) have been assessed with regard to there ability to predict impaired fracture healing at an early stage, nevertheless the conclusions of some studies are not consensual. In this article the authors have revised the potential of BTMs as early predictors of prognosis in adult patients presenting traumatic bone fractures but who did not suffer from osteopenia or postmenopausal osteoporosis. The available information from the different studies performed in this field was systematized in order to highlight the most promising BTMs for the assessment of fracture healing outcome.

Continuous monitoring of concrete mechanical properties since an early age to support construction phasing

The assessment of concrete mechanical properties during construction of concrete structures is of paramount importance for many intrinsic operations. However many of the available non-destructive methods for mechanical properties have limitations for use in construction sites. One of such methodologies is EMM-ARM, which is a variant of classic resonant frequency methods. This paper aims to demonstrate the efforts towards in-situ applicability of EMMARM, as to provide real-time information about concrete mechanical properties such as E-modulus and compressive strength. To achieve the aforementioned objective, a set of adaptations to the method have been successfully implemented and tested: (i) the reduction of the beam span; (ii) the use of a different mould material and (iii) a new support system for the beams. Based on these adaptations, a reusable mould was designed to enable easier systematic use of EMMARM. A pilot test was successfully performed under in-situ conditions during a bridge construction.