Investigation into the performance of turbulence models for fluid flow and heat transfer phenomena in electronic applications

Computational Fluid Dynamics (CFD) is gradually becoming a powerful and almost essential tool for the design, development and optimization of engineering applications. However the mathematical modelling of the erratic turbulent motion remains the key issue when tackling such flow phenomena. The reliability of CFD analysis depends heavily on the turbulence model employed together with the wall functions implemented. In order to resolve the abrupt changes in the turbulent energy and other parameters situated at near wall regions a particularly fine mesh is necessary which inevitably increases the computer storage and run-time requirements. Turbulence modelling can be considered to be one of the three key elements in CFD. Precise mathematical theories have evolved for the other two key elements, grid generation and algorithm development. The principal objective of turbulence modelling is to enhance computational procedures of efficient accuracy to reproduce the main structures of three dimensional fluid flows. The flow within an electronic system can be characterized as being in a transitional state due to the low velocities and relatively small dimensions encountered. This paper presents simulated CFD results for an investigation into the predictive capability of turbulence models when considering both fluid flow and heat transfer phenomena. Also a new two-layer hybrid kε / kl turbulence model for electronic application areas will be presented which holds the advantages of being cheap in terms of the computational mesh required and is also economical with regards to run-time.

Effect of bend orientation on life and puncture point location due to solid particle erosion of a high concentration flow in pneumatic conveyors

An investigation into predicting failure of pneumatic conveyor pipe bends due to hard solid particle impact erosion has been carried out on an industrial scale test rig. The bend puncture point locations may vary with many factors. However, bend orientation was suspected of being a main factor due to the biased particle distribution pattern of a high concentration flow. In this paper, puncture point locations have been studied with different pipe bend orientations and geometry (a solids loading ratio of 10 being used for the high concentration flow). Test results confirmed that the puncture point location is indeed most significantly influenced by the bend orientation (especially for a high concentration flow) due to the biased particle distribution and biased particle flux distribution.

Subrogation and non-payment of rent

Explains the equitable doctrine of subrogation as it applies to tenants, assignees and landlords. Outlines the basic principle of subrogation and examines how the principle affects the legal position of the original tenant, the tenant's assignee, the tenant's surety and the original landlord.

I wanna be a protocol: online media and electronic structures of kinship

Heidegger famously identified Modernity with a technological leveling of being to a single order of a “standing reserve.” In a radically different tone, Gilles Deleuze articulated a single “plane of immanence” within which ontological distinctions between mind and body, God and world, interiority and exteriority become indiscernible. Taking such philosophical declarations as points of departure, this panel will consider how a collapse of ontological distinction emerged as a thematic and structural trope in literary and cinematic modernisms. We hope to consider how writers and film-makers of the 20th c. utilize the resources of their media to ask “the question of being” that troubled their philosophical contemporaries and heirs. In this vein, we will examine how these modernist ontologies of immanence describe the crisis of a subject saturated and eclipsed by a world which comprises her while also remaining strange or opaque. Papers will ask what is lost with the departure of a distinctly human sense of “being” and how the historical arrival of an alternative ontological order may be evident in the lived experience of modernity. In this sense, the relationship to departures and arrivals becomes the modern subject’s suspicion that he is unable to do either vis á vis the world.

Cost Estimation of Machined Parts within an Aerospace Supply Chain

A generic, hierarchical, and multifidelity unit cost of acquisition estimating methodology for outside production machined parts is presented. The originality of the work lies with the method’s inherent capability of being able to generate multilevel and multifidelity cost relations for large volumes of parts utilizing process, supply chain costing data, and varying degrees of part design definition information. Estimates can be generated throughout the life cycle of a part using different grades of the combined information available. Considering design development for a given part, additional design definition may be used as it becomes available within the developed method to improve the quality of the resulting estimate. Via a process of analogous classification, parts are classified into groups of increasing similarity using design-based descriptors. A parametric estimating method is then applied to each subgroup of the machined part commodity in the direction of improved classification and using which, a relationship which links design variables to manufacturing cycle time may be generated. A rate cost reflective of the supply chain is then applied to the cycle time estimate for a given part to arrive at an estimate of make cost which is then totalled with the material and treatments cost components respectively to give an overall estimate of unit acquisition cost. Both the rate charge applied and the treatments cost calculated for a given procured part is derived via the use of ratio analysis.

Genocide and the International Court of Justice: Finally, a Duty to Prevent the Crime of Crimes

The International Court of Justice has issued its long-awaited decision in the suit filed by Bosnia and Herzegovina against Serbia and Montenegro with respect to the 1992–1995 war. The decision confirms the factual and legal determinations of the International Criminal Tribunal for the former Yugoslavia, ruling that genocide was committed during the Srebrenica massacre in July 1995 but that the conflict as a whole was not genocidal in nature. The Court held that Serbia had failed in its duty to prevent genocide in Srebrenica, although—because, the Court said, there was no certainty that it could have succeeded in preventing the genocide—no damages were awarded. The judgment provides a strong and authoritative statement of the general duty upon states to prevent genocide that dovetails well with the doctrine of the responsibility to protect.

Prevalence of childhood abuse in mothers taking part in a study of parenting their own children.

This paper describes the incidence of maltreatment histories in a community sample of mothers of one-year old infants in Northern Ireland. The occurrence of five subsets of childhood maltreatment is examined: emotional abuse, emotional neglect, physical abuse, physical neglect and sexual abuse. Of the 201 women who completed the Childhood Trauma Questionnaire (CTQ), 70 mothers (35%) reported experiencing one or more types of maltreatment during childhood. Forty-eight mothers (24%) gave a history of being emotionally abused, 43 (21%) of emotional neglect, 27 (13%) of physical abuse, 20 (10%) of sexual abuse, and 19 (10%) of physical neglect. Physical abuse was the only type of maltreatment which showed an association with maternal socio-economic status, with higher incidence reported amongst Occupational Classes 4 and 5 (lower supervisory and technical occupations and semi-routine and routine groups). More than half of those with a history of abuse experienced more than one type of maltreatment (42 mothers or 60% of those reporting maltreatment). Differences in rates of incidence to more recent studies on younger adults are discussed, as well as implications for prevention and intervention.

El Ser como mediación. Ontología, estética y analogía en la interpretación del ‘esse’ tomasiano de H. U. von Balthasar

El presente artículo expone los fundamentos de la interpretación que del esse tomasiano lleva a cabo Hans Urs von Balthasar. En ella ofrece von Balthasar, a partir de una interpretación en la línea de Siewerth, y como tal novedosa para la historia de la crítica, las directrices fundamentales de su propio pensamiento filosóficoteológico, cuyo eje lo constituye la diferencia entre esse y Dios como modelo para una hermenéutica no monista de la realidad. Con todo, la propuesta no está exenta de algunas dificultades y arbitrariedades que, desde una perspectiva crítica y aconfesional (por la que aquí se opta), conviene ineludiblemente subrayar.

Metamaterial made of paired planar conductors: Particle resonances, phenomena and properties

The properties and characteristics of a recently proposed anisotropic metamaterial based upon layered arrays of tightly coupled pairs of "dogbone" shaped stripe conductors have been explored in detail. It has been found that a metamaterial composed of such stacked layers exhibits artificial magnetism and may support backward wave propagation. The equivalent network models of the constitutive conductor pairs arranged in the periodic array have been devised and applied to the identification of the specific types of resonances, and to the analysis of their contribution into the effective dielectric and magnetic properties of the artificial medium. The proposed "dogbone" configuration of conductor pairs has the advantage of being entirely realizable and assemblable in planar technology. It also appears more prospective than simple cut-wire or metal-plate pairs because the additional geometrical parameters provide an efficient control of separation between the electric and magnetic resonances that, in turn, makes it possible to obtain a fairly broadband left-handed behaviour of the structure at low frequencies.

The politics of ethical foreign policy::A responsibility to protect whom?

Ethical foreign policy persists as a problem of international relations, especially regarding humanitarian intervention. However, despite apparent international upheavals, the debate about the ethics of humanitarian intervention has remained fundamentally unchanged. To escape the limits of this debate, this article deconstructs British claims to ethical foreign policy since 1997, reading these claims against themselves and against contemporary humanitarian intervention literature. It finds that Britain’s ethical framework, the ‘doctrine of international community’, which justifies interventions in Kosovo, Sierra Leone and Afghanistan, is undone by the anomalous, yet exemplary, invasion of Iraq. This demonstrates the politics of ethical foreign policy: first, that any intervention, no matter how ‘ethical’ or ‘right’, produces suffering and death; and, second, that we cannot know for sure whether we are doing the right thing by intervening. Embracing, rather than effacing, the political nature of ethical foreign policy opens up a more intellectually honest and positive potential future for relating to the foreign in a responsible manner.

The Right to Self-Defence in National and International Law: The Role of the Imminence Requirement

This article explores the doctrine of self-defence within the context of the challenges directed at the imminence requirement, from the perspective of both national and international law. The article will attempt to illustrate that the requirement of imminence underlines the political character of the self-defence doctrine wherein private force may only be resorted to in the absence of institutional protection. This study will argue that the imminence rule can not merely be regarded as a "proxy" for establishing necessity; rather, the elements of imminence, necessity, and proportionality are inextricably connected to ensure that defensive force is only resorted to when national or international authorities are not in a position to prevent an illegal aggression, and that the defensive lethal force is not abused.

Use of a novel micro-fluidic device to create arrays for multiplex analysis of large and small molecular weight compounds by surface plasmon resonance

There is an increasing demand to develop biosensor monitoring devices capable of biomarker profiling for predicting animal adulteration and detecting multiple chemical contaminants or toxins in food produce. Surface plasmon resonance (SPR) biosensors are label free detection systems that monitor the binding of specific biomolecular recognition elements with binding partners. Essential to this technology are the production of biochips where a selected binding partner, antibody, biomarker protein or low molecular weight contaminant, is immobilised. A micro-fluidic immobilisation device allowing the covalent attachment of up to 16 binding partners in a linear array on a single surface has been developed for compatibility with a prototype multiplex SPR analyser.

The immobilisation unit and multiplex SPR analyser were respectively evaluated in their ability to be fit-for-purpose for binding partner attachment and detection of high and low molecular weight molecules. The multiplexing capability of the dual technology was assessed using phycotoxin concentration analysis as a model system. The parent compounds of four toxin groups were immobilised within a single chip format and calibration curves were achieved. The chip design and SPR technology allowed the compartmentalisation of the binding interactions for each toxin group offering the added benefit of being able to distinguish between toxin families and perform concentration analysis. This model is particularly contemporary with the current drive to replace biological methods for phycotoxin screening.

Time-resolved optical spectroscopy of the pulsating DA white dwarf HS0507+0434B - New constraints on mode identification and pulsation properties

We present a detailed analysis of time-resolved optical spectra of the ZZ Ceti white dwarf, HS 0507+0434B. Using the wavelength dependence of observed mode amplitudes, we deduce the spherical degree, l, of the modes, most of which have l = 1. The presence of a large number of combination frequencies (linear sums or differences of the real modes) enabled us not only to test theoretical predictions but also to indirectly infer spherical and azimuthal degrees of real modes that had no observed splittings. In addition to the above, we measure line-of-sight velocities from our spectra. We find only marginal evidence for periodic modulation associated with the pulsation modes: at the frequency of the strongest mode in the lightcurve, we measure an amplitude of 2.6 +/- 1.0 kms(-1), which has a probability of 2% of being due to chance; for the other modes, we find lower values. Our velocity amplitudes and upper limits are smaller by a factor of two compared to the amplitudes found in ZZ Psc. We find that this is consistent with expectations based on the position of HS 0507+0434B in the instability strip. Combining all the available information from data such as ours is a first step towards constraining atmospheric properties in a convectionally unstable environment from an observational perspective.

The status of the cryptic bat species, Myotis mystacinus and Myotis brandtii in Ireland

The recent identification of Myotis brandtii in Ireland raised the possibility that many roosts previously identified as M. mystacinus had the potential of being misidentified M. brandtii. Thus, the distribution and population estimates for M. mystacinus may have been over-estimated, while M. brandtii may have been under-estimated. Results from an all Ireland genetic survey of known M. mystacinus maternity roosts confirm that no long term misidentification has taken place. All specimens caught and sampled were M. mystacinus. Additonally, no further records of M. brandtii were found during six nights of woodland trapping using the acoustic lure. While the status of M. mystacinus in Ireland is now listed as ‘least concern’ in the Irish Red List, M. brandtii is listed as ‘data deficient’ and cannot currently be considered a resident species

The technical merits of turbogenerating shown through the design, validation and implementation of a 1 dimensional engine model

Turbocompounding is the process of recovering a proportion of an engine’s fuel energy that would otherwise be lost in the exhaust process and adding it to the output power. This was first seen in the 1930s and is carried out by coupling an exhaust gas turbine to the crankshaft of a reciprocating engine. It has since been recognised that coupling the power turbine to an electrical generator instead of the crankshaft has the potential to reduce the fuel consumption further with the added flexibility of being able to decide how this recovered energy is used. The electricity generated can be used in automotive applications to assist the crankshaft using a flywheel motor generator or to power ancillaries that would otherwise have run off the crankshaft. In the case of stationary power plants, it can assist the electrical power output. Decoupling the power turbine from the crankshaft and coupling it to a generator allows the power electronics to control the turbine speed independently in order to optimise the specific fuel consumption for different engine operating conditions. This method of energy recapture is termed ‘turbogenerating’.

This paper gives a brief history of turbocompounding and its thermodynamic merits. It then moves on to give an account of the validation of a turbogenerated engine model. The model is then used to investigate what needs to be done to an engine when a turbogenerator is installed. The engine being modelled is used for stationary power generation and is fuelled by an induced biogas with a small portion of palm oil being injected into the cylinder to initiate combustion by compression ignition. From these investigations, optimum settings were found that result in a 10.90% improvement in overall efficiency. These savings relate to the same engine without a turbogenerator installed operating with fixed fuelling.