O consumo na estratégia de desenvolvimento sustentável brasileira

Dissertação (mestrado)—Universidade de Brasília, Centro de Estudos Avançados Multidisciplinares, Programa de Pós-Graduação em Desenvolvimento, Sociedade e Cooperação Internacional, 2016.

Álgebra de mapas de atributos de solos para estimativa da aptidão agrícola das terras.

The land suitability evaluation is used to establish land zonings for agriculture activities. Geographic information systems (GIS) are useful for integrating different attributes necessaries to define apt and not apt lands. The present study had as main objective to describe procedures to define land suitability using GIS tools, soils maps and data soils profiles data, emphasizing procedures to define soil atributes. The area studied was the watershed of Córrego Espraiado, Ribeirão Preto-SP, located on the recharging area of the Guarani Aquifer, with approximately 4,130 ha and predominance of sugar cane culture. The database project was developed using the GIS Idrisi 32. The land suitability evaluation was done considering the intensive agricultural production system predominant in the watershed, adjusted for the vulnerability of the areas of recharge and for the methodology of GIS tools. Numerical terrain models (NTM) had been constructed for cation exchange capacity, basis saturation, clay content and silt+clay content using kriging (geostatistical interpolator), and for aluminum saturation using the inverse-square-distance. Boolean operations for handling geographic fields (thematic maps and NTM) to produce information plans are described and a land suitability map obtained by GIS tools is presented, indicating that 85% of watershed lands are apt to annual cultures.

Flower abscission and fruit set on table grapes (Vitis vinifera L.): unraveling physiological and molecular mechanisms

Doutoramento em Engenharia Agronómica - Instituto Superior de Agronomia - UL

Bioactive compounds of citrus as health promoters

Citrus are a group of fruit species, quite heterogeneous in many aspects, including chemical composition of the fruit. Since ancient times, some citrus fruits were used to prevent and cure human diseases. In the recent decades, it has been demonstrated that fruits can actually help prevent and cure some diseases and above all, they are essential in a balanced diet. Citrus fruits, as one of the groups of fruit species, with greater importance in the world, have been studied for their effects on human health. Some species of citrus were referred as potential antioxidant based therapy for heart disease, cancer and inflammation. Fruit peels and seeds have also high antioxidant activity. The health benefits of citrus fruit have mainly been attributed to the high level of bioactive compounds, such as phenols (e.g., flavanone glycosides, hydroxycinnamic acids), carotenoids and vitamin C. These compounds are present in the fruit pulp and hence in the juice. But some bioactive compounds can be found in parts of the fruit which usually are not used for human food. The content of bioactive compounds depends on the species and cultivar, but also depends on the production system followed in the orchard. Citrus fruits, their derivatives and their by-products (peel, pulp and oil) are reach in different bioactive compounds and its maturity, postharvest and agroindustry processes influence their composition and concentration. The aim of this chapter was to review the main bioactive compounds of the different components of citrus and their relationship to health.

Ruminal methane emission by dairy cattle in southeast Brazil.

ABSTRACT: Ruminal gases, particularly methane, generated during the fermentative process in rumen, represent a partial loss of feed energy and are also pointed to as an important factors in greenhouse effect. This study aimed at quantifying methane (CH 4) emission rates from lactating and dry cows and heifers, 24 month-old in average, on pasture under Southeast Brazil tropical conditions, using the tracer gas technique, sulphur hexafluoride (SF 6), four animals per category, distributed in four blocks. Measurements were performed in February and June, 2002, with Holstein and Brazilian Dairy Crossbred (Holstein ¾ x Gir (Zebu) ¼), maintained on fertilized Tanzania-grass (Panicum maximum Jacq. cv. Tanzania) and fertilized Brachiaria-grass (Brachiaria decumbens cv. Basilisk) pastures. Heifers of both breeds were maintained on unfertilized Brachiaria-grass to simulate conditions of extensive cattle farming systems. CH 4 and SF 6 levels were measured with gas chromatography. Differences in CH4 emissions were measured (p < 0.05) for genetical groups. Holstein produced more methane (299.3g day?1) than the Crossbred (264.2 g day?1). Lactating cows produced more methane (353.8 g day?1) than dry cows (268.8 g day?1) and heifers (222.6 g day?1). Holstein, with greater milk production potential, produced less CH4 (p < 0.05) per unit of dry matter intake (19.1 g kg?1) than the Crossbred (22.0 g kg?1). Methane emission by heifers grazing fertilized pasture (intensive system) was 222.6 g day?1, greater (p < 0.05) than that of heifers on unfertilized pasture (179.2 g day?1). Methane emission varied as function of animal category and management intensity of production system.

De gata borralheira a Cinderela :nova espacialidade decorrente do desenvolvimento turístico, diferenciada pelo estilo de vida em Ponta Negra, Natal, RN

The transformations economical, social and politics in you finish them decades of the century XX brought changes that didn't just limit to the production system. The flexible accumulation took many workers lost her/it their workstations and they look for her/it new survival forms, migrating for administrative activities, of services rendered and for the tourist activity of small and medium load. The State has been investing in the implantation of plans of tourist development in order to create favorable conditions for the reproduction of the tourist activity in Brazil, mainly in the Northeast. A space when it starts to present a predominant economical activity suffers a restructuring in their social and economical relationships. The restructuring of these relationships takes to the construction of a new espacialidade. In the city of Christmas, in Rio Grande do Norte, the neighborhood of Black Tip is the most representative of the public investments for the tourist development. After intense process of tourist urbanization, Black Tip passed interfering in the global context consolidating as the tourist locus in the city. The tourist urbanization of the neighborhood took to the transformation of the space in merchandise that is sold and consumed as such. The recreation of fragments of other cultures brought by social actors, resulting from migratory processes stimulated by the tourist development, it has been presenting ruled social relationships in the informational technology, consumption of global goods and in the fragmentation of the urban space characterized by the internationalization and cosmopolitização. That process has been masking the inequalities partners and cultural as well as the territorial appropriation for an economical elite. The spaces are being appropriate for investors of the tourist section, private investors, agents and real estate producers, where the inequality is not just economical, but also cultural. The local population, mainly of the urban fraction of the Town of Black Tip, it doesn't participate of the productive process in function of the little or any professional qualification and he/she doesn't also have access to the consumption process. To the native ones it remains the fight for the preservation of his/her cultural identity and for the survival

Uso da glicerina oriunda da síntese do biodiesel em sistemas microemulsionados visando aplicação de herbicidas

The program PROBIODIESEL from the Ministry of Science and Technology has substantially increased glycerine, obtained as a sub-product of biodiesel production process, making it necessary to seek alternatives for the use of this co-product. On the other hand, herbicides although play a role of fundamental importance in the agricultural production system in force, have been under growing concern among the various segments of society because of their potential environmental risk. In this work, we used glycerin in microemulsion systems for application of herbicides, to improve efficiency and lower environmental pollution caused by the loss of those products to the environment. To obtain the systems of microemulsinados were used Unitol L90 NP and Renex 40 as surfactants, butanol as co-surfactant, coconut oil as oil phase and aqueous phase as we used solutions of glycerin + water. Through the determination of phase diagrams, the microemulsion region was found in the system E (L90 Unitol, coconut oil and glycerin + water 1:1). Three points were chosen to the aqueous phase rich in characterization and application in the solubilization of glyphosate and atrazine. Three experiments were performed in Horta, Department of Plant Sciences, Plant Science Sector, UFERSA, Mossoró-RN. The first experiment was conducted in randomized complete blocks with 20 treatments and four replications. The treatments consisted of five doses of the herbicide glyphosate (0.0, 0.45, 0.9, 1.35 and 1.8 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity of Brachiaria brizantha was measured at 7, 14, 28 and 60 DAA (days after application). At 60 DAA, we evaluated the biomass of plants. The second experiment was developed in randomized complete blocks with 20 treatments and four repetitions. The treatments consisted of five doses of the herbicide atrazine (0.0, 0.4, 0.8, 1.6 and 2.4 L ha-1) diluted with four sauces: C1, C2, C3 (microemulsions) and C4 (water). The phytotoxicity on Zea mays and Talinum paniculatum was evaluated at 2, 7, 20 DAA. The experiment III was developed in randomized complete blocks with 16 treatments and three repetitions. The treatments consisted of 16 combinations among the constituents of the microemulsion: Unitol L90 surfactant (0.0, 1.66, 5.0, 15 %) and glycerin (0.0, 4.44, 13.33 and 40.0 %). The phytotoxicity on Zea mays was evaluated at 1, 7 and 14 DAA. At 14 DAA, we evaluated the biomass of plants. The control plants using the microemulsions was lower than in the water due to the poisoning caused by the initial microemulsions in the leaves of the plants, a fact that hinders the absorption and translocation of the herbicide. There was no toxicity in Zea mays plants caused by the herbicide, however, were highly intoxicated by microemulsions. T. paniculatum was better controlled in spraying with the microemulsions, regardless of the dose of the herbicide. The glycerine did not cause plant damage. Higher poisoning the plants are caused by tensoactive Unitol L90 and higher rates occur with the use of higher concentrations of surfactant and glycerin, or microemulsion. The microemulsions used hampered the action of glyphosate in controlling B. brizantha and caused severe poisoning in corn, and these poisonings attributed mainly to the action of surfactant

Simulador de escoamento multifásico em poços de petróleo (SEMPP)

The multiphase flow occurrence in the oil and gas industry is common throughout fluid path, production, transportation and refining. The multiphase flow is defined as flow simultaneously composed of two or more phases with different properties and immiscible. An important computational tool for the design, planning and optimization production systems is multiphase flow simulation in pipelines and porous media, usually made by multiphase flow commercial simulators. The main purpose of the multiphase flow simulators is predicting pressure and temperature at any point at the production system. This work proposes the development of a multiphase flow simulator able to predict the dynamic pressure and temperature gradient in vertical, directional and horizontal wells. The prediction of pressure and temperature profiles was made by numerical integration using marching algorithm with empirical correlations and mechanistic model to predict pressure gradient. The development of this tool involved set of routines implemented through software programming Embarcadero C++ Builder® 2010 version, which allowed the creation of executable file compatible with Microsoft Windows® operating systems. The simulator validation was conduct by computational experiments and comparison the results with the PIPESIM®. In general, the developed simulator achieved excellent results compared with those obtained by PIPESIM and can be used as a tool to assist production systems development

A SCR Model based on Reactor and Engine Experimental Studies for a Cu-zeolite Catalyst

A NOx reduction efficiency higher than 95% with NH3 slip less than 30 ppm is desirable for heavy-duty diesel (HDD) engines using selective catalytic reduction (SCR) systems to meet the US EPA 2010 NOx standard and the 2014-2018 fuel consumption regulation. The SCR performance needs to be improved through experimental and modeling studies. In this research, a high fidelity global kinetic 1-dimensional 2-site SCR model with mass transfer, heat transfer and global reaction mechanisms was developed for a Cu-zeolite catalyst. The model simulates the SCR performance for the engine exhaust conditions with NH3 maldistribution and aging effects, and the details are presented. SCR experimental data were collected for the model development, calibration and validation from a reactor at Oak Ridge National Laboratory (ORNL) and an engine experimental setup at Michigan Technological University (MTU) with a Cummins 2010 ISB engine. The model was calibrated separately to the reactor and engine data. The experimental setup, test procedures including a surrogate HD-FTP cycle developed for transient studies and the model calibration process are described. Differences in the model parameters were determined between the calibrations developed from the reactor and the engine data. It was determined that the SCR inlet NH3 maldistribution is one of the reasons causing the differences. The model calibrated to the engine data served as a basis for developing a reduced order SCR estimator model. The effect of the SCR inlet NO2/NOx ratio on the SCR performance was studied through simulations using the surrogate HD-FTP cycle. The cumulative outlet NOx and the overall NOx conversion efficiency of the cycle are highest with a NO2/NOx ratio of 0.5. The outlet NH3 is lowest for the NO2/NOx ratio greater than 0.6. A combined engine experimental and simulation study was performed to quantify the NH3 maldistribution at the SCR inlet and its effects on the SCR performance and kinetics. The uniformity index (UI) of the SCR inlet NH3 and NH3/NOx ratio (ANR) was determined to be below 0.8 for the production system. The UI was improved to 0.9 after installation of a swirl mixer into the SCR inlet cone. A multi-channel model was developed to simulate the maldistribution effects. The results showed that reducing the UI of the inlet ANR from 1.0 to 0.7 caused a 5-10% decrease in NOx reduction efficiency and 10-20 ppm increase in the NH3 slip. The simulations of the steady-state engine data with the multi-channel model showed that the NH3 maldistribution is a factor causing the differences in the calibrations developed from the engine and the reactor data. The Reactor experiments were performed at ORNL using a Spaci-IR technique to study the thermal aging effects. The test results showed that the thermal aging (at 800°C for 16 hours) caused a 30% reduction in the NH3 stored on the catalyst under NH3 saturation conditions and different axial concentration profiles under SCR reaction conditions. The kinetics analysis showed that the thermal aging caused a reduction in total NH3 storage capacity (94.6 compared to 138 gmol/m3), different NH3 adsorption/desorption properties and a decrease in activation energy and the pre-exponential factor for NH3 oxidation, standard and fast SCR reactions. Both reduction in the storage capability and the change in kinetics of the major reactions contributed to the change in the axial storage and concentration profiles observed from the experiments.

The user participation on facebook pages of the three Portuguese tv news channels – RTP3, SIC NOTÍCIAS, AND TVI24

In recent decades, the national and international media contexts, in particular television media, significantly changed. The role that social networks, in particular Facebook, have taken as a content diffusion platform is unquestionable. Nowadays, traditional media (radio, newspaper, television) use the Web’s potential to distribute news content (Canelas, 2011). Currently, all TV news channels in Portugal have a website or a page on social networks. TV stations have increased communication channels with the public on digital platforms and study strategies that promote the participation and interaction with the news content (Cazajeira, 2015). The TV / Internet convergence will not only reach the content, but also the consumer, who becomes an interactive and participative audience. This reality imposes on journalism a continuous and updated news production system, dependent on a user being permanently connected to the Internet (Cazajeira, 2015). In fact, a report launched by an autonomous institution that has the function of supervising and regulating the media Portugal (ERC, 2015), confirms the relevance that social media has assumed in the publication and consumption of news. Social networks are recognised as one of the most important means for news media consultation, right after television, and the practice of sharing news is very common among consumers of online news in Portugal. Furthermore, when compared to other countries analysed by Reuters Institute (Newman, Levy, & Nielsen, 2015), Portuguese consumers are those who make the most comments to online news, preferring social networks to news sites. Considering the importance of new online platforms for journalism, this study aims to present a quantitative analysis of user participation on the Facebook pages of the three Portuguese TV news channels, specifically RTP3, SIC Notícias and TVI24, between 8 and 14 February 2016. To track this participation, the following parameters were used: the "like" button as a way to study the demonstration of publication interest; "sharing" of a particular element, be it a photo, a video or a text, on the user Timeline, the Timeline of a friend or by private message. This monitoring is important to understand the dissemination of news content; and the comments area. The number of comments will help understand the dynamics and the discussion that the publication has on the public. The results of 1063 posts indicate that of the analysed parameters - "Like", "Comment", and "Share" – the one with the greatest power of participation among the users of the pages of the three Portuguese TV news channels is the "Like" system, followed by "Share" and then "Comment". The theme that generates the most user participation with "Likes" and “Comments” parameters are "Science and Technology", “Education” and “Humorous/Satirical/Unusual”. Finally, the publications available end of the night (10pm-1am) has better participation rates.

The presence of three Portuguese TV news channels (RTP3, SIC NOTÍCIAS, and TVI24) on facebook

In recent decades, the national and international media contexts, in particular television, media significantly changed. Although they were not created for the purpose, the role that social networks, in particular Facebook, have taken as a content diffusion platform is unquestionable. Nowadays, traditional media (radio, newspaper, television) use the Web’s potential to distribute news content (Canelas, 2011). Currently, all TV news channels in Portugal have a website or a page on social networks. TV stations have increased communication channels with the public on digital platforms and study strategies that promote the participation and interaction with the news content (Cazajeira, 2015). The TV / Internet convergence will not only reach the content, but also the consumer, who becomes an interactive and participative audience. This reality imposes on journalism a continuous and updated news production system, dependent on a user being permanently connected to the Internet (Cazajeira, 2015). In fact, an ERC report (2015) confirms the relevance that social media has assumed in the publication and consumption of news. Social networks are recognised as one of the most important means for news media consultation, right after television, and the practice of sharing news is very common among consumers of online news in Portugal. Furthermore, when compared to other countries analysed by Reuters Institute (Newman, Levy, & Nielsen, 2015), Portuguese consumers are those who make the most comments to online news, preferring social networks to news sites. Considering the importance of new online platforms for journalism, this study aims to present a quantitative analysis of user participation on the Facebook pages of the three Portuguese TV news channels, specifically RTP3, SIC Notícias and TVI24, between 8 and 14 February 2016. To track this participation, the following parameters were used: the "like" button as a way to study the demonstration of publication interest; "sharing" of a particular element, be it a photo, a video or a text, on their own Timeline, the Timeline of a friend or by private message. This monitoring is important to understand the dissemination of news content; and the comments area. The number of comments will help understand the dynamics and the discussion that the publication has on the public. The results of 1063 posts indicate that of the analysed parameters - "Like", "Comment", and "Share" – the one with the greatest power of participation among the users of the pages of the three Portuguese TV news channels is the "Like" system, followed by "Share" and then "Comment". Analysing the thematic that create the most user participation with "Likes" and “Comments” parameters are "Science and Technology". “Education” and “Humorous/Satirical/Unusual Finally, the publications available end of the night (10pm-1am) has better participation rates.

Flowering synchronization in hybrid rice parental lines.

The cultivation of hybrid rice is a technology that allows for an increase in grain yield of 30% relative to the grain yield of conventional cultivars. However, the main challenge for this technology is related to seed production, which has high production costs and low seed yields. Therefore, agronomic techniques that could enhance flowering synchrony of parental lines in the field are essential for an efficient production system of hybrid rice seeds. The objective of this work was to study the effects of sowing depth, plant density and fertilization with nitrogen or phosphorus as potential techniques to increase the pollen availability in the field and, consequently, the flowering synchrony between parental lines in the production of hybrid rice seeds. The experiments were conducted during two growing seasons in the Central Region of Brazil. All of the experiments were conducted as a randomized complete block in a split plot scheme; however, the experiment with P fertilization had a factorial design. Our research allow inferring that nitrogen fertilization technique applied to the soil or foliar at the time of panicle differentiation does not affect the time of onset of flowering of rice varieties INTA Puitá CL and L106R, which are potential R lines for the production of hybrid rice. Agronomic techniques of variation in sowing depth, seeding rate and the phosphate fertilization affect the time of onset of flowering from 10 to 19 degree-days, which could represent two days in the crop cycle, for the line L106R. Such techniques constitute potential alternatives for use in hybrid rice seed production systems and could be applied in alternated blocks of R lines in the field to obtain longer periods of pollen availability in the field.

Modelling photochemical production of fine particulates in a toluene/NOx/water vapour system

This work investigates the computer modelling of the photochemical formation of smog products such as ozone and aerosol, in a system containing toluene, NOx and water vapour. In particular, the problem of modelling this process in the Commonwealth Scientific and Industrial Research Organization (CSIRO) smog chambers, which utilize outdoor exposure, is addressed. The primary requirement for such modelling is a knowledge of the photolytic rate coefficients. Photolytic rate coefficients of species other than N02 are often related to JNo2 (rate coefficient for the photolysis ofN02) by a simple factor, but for outdoor chambers, this method is prone to error as the diurnal profiles may not be similar in shape. Three methods for the calculation of diurnal JNo2 are investigated. The most suitable method for incorporation into a general model, is found to be one which determines the photolytic rate coefficients for N02, as well as several other species, from actinic flux, absorption cross section and quantum yields. A computer model was developed, based on this method, to calculate in-chamber photolysis rate coefficients for the CSIRO smog chambers, in which ex-chamber rate coefficients are adjusted by accounting for variation in light intensity by transmittance through the Teflon walls, albedo from the chamber floor and radiation attenuation due to clouds. The photochemical formation of secondary aerosol is investigated in a series of toluene-NOx experiments, which were performed in the CSIRO smog chambers. Three stages of aerosol formation, in plots of total particulate volume versus time, are identified: a delay period in which no significant mass of aerosol is formed, a regime of rapid aerosol formation (regime 1) and a second regime of slowed aerosol formation (regime 2). Two models are presented which were developed from the experimental data. One model is empirically based on observations of discrete stages of aerosol formation and readily allows aerosol growth profiles to be calculated. The second model is based on an adaptation of published toluene photooxidation mechanisms and provides some chemical information about the oxidation products. Both models compare favorably against the experimental data. The gross effects of precursor concentrations (toluene, NOx and H20) and ambient conditions (temperature, photolysis rate) on the formation of secondary aerosol are also investigated, primarily using the mechanism model. An increase in [NOx]o results in increased delay time, rate of aerosol formation in regime 1 and volume of aerosol formed in regime 1. This is due to increased formation of dinitrocresol and furanone products. An increase in toluene results in a decrease in the delay time and an increase in the rate of aerosol formation in regime 1, due to enhanced reactivity from the toluene products, such as the radicals from the photolysis of benzaldehyde. Water vapor has very little effect on the formation of aerosol volume, except that rates are slightly increased due to more OH radicals from reaction with 0(1D) from ozone photolysis. Increased temperature results in increased volume of aerosol formed in regime 1 (increased dinitrocresol formation), while increased photolysis rate results in increased rate of aerosol formation in regime 1. Both the rate and volume of aerosol formed in regime 2 are increased by increased temperature or photolysis rate. Both models indicate that the yield of secondary particulates from hydrocarbons (mass concentration aerosol formed/mass concentration hydrocarbon precursor) is proportional to the ratio [NOx]0/[hydrocarbon]0