ON-LINE STEREO PROCESSING FOR THE SEM.

A convenient system for the rapid extraction of three dimensional information from pairs of SEM images has been constructed, eliminating the need for time-consuming photography. Results are produced in a digestable form. Distortions inherent in the SEM record display and in the photographic system are not relevant to the system described; only those arising within the column and stage need be considered.

Topographical analysis in the SEM using an automatic focusing technique

A novel technique for automated topographical analysis in the SEM has been investigated. It utilizes a 16-bit minicomputer arranged to act as an automatic focusing unit. The computer is coupled to the objective lens of the microscope, by means of a digital to analogue converter, and may regulate the excitation of the lens under program control. Further digital-to-analogue converters allow the computer to act as a programmable scan generator by applying ramp waveforms to the scan amplifiers, permitting the beam to be swept over a small sub-region of the field of interest. The video signal is sampled and applied to an analogue-to-digital converter; the resultant binary numbers are stored in computer memory as an array of values representing relative image intensities within a subregion. A differencing algorithm applied to the collected data allows the level of objective lens excitation to be found at which the sharpness of the image is optimized, and the excitation may be related to the working distance for that subregion through a previous calibration experiment. The sensitivity of the method for detecting small height changes is theoretically of the order of 1 μm.

ANALYSIS OF A PROBLEM INVOLVING RADIAL CONSOLIDATION.

An analytical solution is presented for the vertical consolidation of a cylindrical annulus of clay with horizontal drainage occurring to concentric internal and external drainage boundaries. Numerical results are given for various ratios of internal and external radii and it is shown that solutions for conventional one-dimensional consolidation, and for consolidation of a cylindrical block of clay with drainage only to the outer cylindrical boundary form extremes to the analysis presented here. An application of the solution to the estimation of horizontal permeability of clay is briefly described.

SOME MEASUREMENTS OF THE PERMEABILITY OF KAOLIN.

This paper reports an experimental investigation of the vertical and horizontal permeabilities of speswhite kaolin clay. The permeabilities were measured using falling head permeability tests. A modification to a conventional oedometer was devised so that either vertical or horizontal permeabilities could be determined. It was found that the vertical and horizontal permeabilities of the clay slurry were similar, but that as the clay was consolidated one dimensionally the anisotropy of the clay fabric resulted in a greater horizontal permeability than the vertical permeability at any void ratio. Both permeabilities were uniquely related to the void ratio.

Some measurements of the permeability of kaolin

The writers wish to present some additional data obtained independently and with different techniques that confirm the results published in the paper. For these tests, the speswhite kaolin clay was prepared as a slurry with a water content of 133 percent and was then consolidated one-dimensionally under an axial stress of 100 kPa in a 203 mm dia. tube. The results presented here show that the anisotropy of permeability is completely preserved (even after the sample is compressed isotropical) as long as the initial part of the stress path corresponds to one-dimensional compression. The data supports the speculation by the authors regarding permeability anisotropy for stress paths other than one-dimensional compression.

An experimentally based "bubble' model for clay

In order to extend the Cam clay model an inner kinematically hardening bubble is added in order to match experimentally observed hysteretic response. The new model is found to be quite successful in reproducing patterns of response observed in slow cyclic oedometer and triaxial tests. -from Authors

植物油脂积累机理和品质改良—利用RNAi改良大豆油脂品质—四合木茎积累三脂酰甘油特征

利用RNAi改良大豆油脂品质 大豆[Glycine max (L.) Merr.]起源于中国，栽培历史悠久，是重要的粮食作物， 同时也是植物油和蛋白的重要来源。随着经济的发展和生活水平的提高，人们不但对大豆的需求量大大增加，同时对大豆的品质也提出了更高的要求。近年来，我国大豆进口量逐年攀升，已远远超过本国生产量。国外转抗除草剂转基因大豆大面积种植大大降低了生产成本，直接影响了我国大豆生产。因此，提高产量和改良品质是当前中国大豆生产所面临的重要课题。基因工程是大豆品种改良更为有效和快速的方法，但是由于历史原因我国的大豆转基因育种与发达国家尚存在一定差距，对我国的大豆生产贡献十分有限。因此，建立高效的大豆转化体系，加强大豆基因工程研究和育种是解决大豆面临困境的关键。 本研究的目的是以我国主要栽培大豆品种（黑农、合丰和东农等）为材料，利用GUS（β-glucuronidase）报告基因和RNAi技术，建立高效的大豆基因转化体系和基因功能研究体系。为大豆产量和品质基因工程改良提供技术手段和理论基础。结果如下： 以大豆下胚轴为外植体，对分生组织产生不定芽的频率进行了研究。培养基中添加高浓度BAP（6-benzylaminopurine）可以诱导外植体分生组织增殖产生不定芽的发生率;在培养基中添加银离子可以明显地促进大豆单个外植体多芽的产生，使得诱导不定芽总数目显著增加;不同基因型大豆再生不定芽能力有着较大区别，黑农44，黑农37，合丰35，合丰39等品种再生能力强;相对于大豆子叶节等再生系统，大豆下胚轴体系具有高效高频的再生特点（总的再生频率高于80%），且重复性好，容易操作。 以大豆下胚轴为外植体，用含有GUS报告基因的根癌农杆菌对其进行遗传转化，并重点对农杆菌菌液浓度、农杆菌侵染时间、乙酰丁香酮（AS）和抗氧化剂浓度等因素对农杆菌大豆转化效率的影响进行了研究。组织化学染色结果显示GUS基因在外植体顶端表达强烈，表达位置主要位于初生芽基部周围的分生组织。 农杆菌浸染时间以 4h 为最佳，此时的GUS瞬时表达频率可达73.0%;培养基中添加浓度为200μmol/L的乙酰丁香酮，可以显著增加GUS瞬时表达频率。抗氧化剂可以显著降低共培养阶段外植体的褐化和坏死率，进而显著提高农杆菌转化效率。用根癌农杆菌转化大豆下胚轴的方法得到了表达GUS基因转基因大豆株系。 利用大豆油酸去饱和酶基因(FAD2-1;Genbank, L43920)在第315-852碱基之间的基因片断构建了反向重复的RNAi表达载体，以农杆菌介导大豆下胚轴转化方法进行转化，并且获得转基因植株。经过PCR，Southern杂交和转基因后代的脂肪酸分析，表明沉默结构已经成功整合到大豆基因组中，并成功抑制了内源基因的表达。与栽培大豆品种相比较，转基因大豆种子的脂肪酸组成发生显著变化，油酸含量由栽培大豆的18.1％增加到71.5％¬-81.9％;亚油酸含量从栽培大豆的46.4％降到了约3.4％。 栽培大豆种子中油酸去饱和比率（ODP, oleic desaturation proportion）为0.76 到 0.84，转基因大豆种子的油酸去饱和比率降为0.06-0.26，表明Δ12-去饱和酶活性降低了74%-94%。上述结果表明，我们构建的RNAi反向重复序列沉默结构高效地抑制了大豆种子FAD2-1基因。 在本研究中，我们通过外源GUS基因的表达和内源FAD2基因的抑制，成功地建立了以大豆下胚轴为外植体的高效农杆菌介导大豆转化体系，并获得了相应的转基因株系。本研究对我国大豆品种基因工程改良以及进一步大豆功能基因组研究有重要参考价值。 四合木茎积累三脂酰甘油特征 四合木(Tetraena mongotica Maxim)是蒺藜科(Zygophyllaceac)四合木属唯一的种，是地球上最具代表性的古老残遗濒危珍稀植物。由于四合木极易燃烧，当地居民称其为“油柴”。 通过对四合木内可能存在的“油”成分进行了分析，我们发现其茎组织含有大量的三脂酰甘油（Triacylglycerols），含量达到46 mg/g DM。在韧皮部中更高，达到90 mg/g DM。我们通过半薄切片对四合木中三脂酰甘油在不同组织的分布和存在形式进行了研究，发现三脂酰甘油主要以油体形式存在于木质部和韧皮部的薄壁组织中。在韧皮部中，几乎所有的薄壁细胞都含有大量的油体。 三脂酰甘油在植物的生长发育中起着非常重要的作用。作为植物生长发育所需的碳源和能量，三脂酰甘油一般储存在植物的种子和果实中。虽然也有关于其在茎和叶中发现的报道，但是含量很少。四合木茎组织含有大量的三脂酰甘油，这种现象可能与四合木茎中存在茎特异油脂合成酶系统有关。因此，克隆相关基因并在作物中表达，将对能源植物的开发具有重要意义。

Novel architecture to facilitate disassembly and reuse of electronic components and sub-assemblies

This paper advances the proposition that in many electronic products, the partitioning scheme adopted and the interconnection system used to interconnect the sub-assemblies or components are intimately related to the economic benefits, and hence the attractiveness, of reuse of these items. An architecture has been developed in which the residual values of the connectors, components and sub-assemblies are maximized, and opportunities for take-back and reuse of redundant items are greatly enhanced. The system described also offers significant manufacturing cost benefits in terms of ease of assembly, compactness and robustness.

Analytic model for turn off in the silicon-on-insulator LIGBT

Lateral insulated gate bipolar transistors (LIGBTs) in silicon-on-insulator (SOI) show a unique turn off characteristic when compared to junction-isolated RESURF LIGBTs or vertical IGBTs. The turn off characteristic shows an extended `terrace' where, after the initial fast transient characteristic of IGBTs due to the loss of the electron current, the current stays almost at the same value for an extended period of time, before suddenly dropping to zero. In this paper, we show that this terrace arises because there is a value of LIGBT current during switch off where the rate of expansion of the depletion region with respect to the anode current is infinite. Once this level of anode current is approached, the depletion region starts to expand very rapidly, and is only stopped when it reaches the n-type buffer layer surrounding the anode. Once this happens, the current rapidly drops to zero. A quasi-static analytic model is derived to explain this behaviour. The analytically modelled turn off characteristic agrees well with that found by numerical simulation.

Chiral gratings - A new class of polarization sensitive metamaterials

The first experimental demonstration of unique polarizatioon characteristics are reported. It is believed that the strong polarization effects reported result from the chirality imposed by the patterns of gammadions enhanced by plasmon effects due to the nanostructuring of the metal film in which they are cut. It is clear that such structures has the potential to yield many new and intriguing applications in optoelectronics and other areas.

Short-channel polymer field-effect-transistor fabrication using spin-coating-induced edge template and ink-jet printing

A method to fabricate polymer field-effect transistors with submicron channel lengths is described. A thin polymer film is spin coated on a prepatterned resist with a low resolution to create a thickness contrast in the overcoated polymer layer. After plasma and solvent etching, a submicron-sized line structure, which templates the contour of the prepattern, is obtained. A further lift-off process is applied to define source-drain electrodes of transistors. With a combination of ink-jet printing, transistors with channel length down to 400 nm have been fabricated by this method. We show that drive current density increases as expected, while the on/off current ratio 106 is achieved. © 2005 American Institute of Physics.

Maintaining internal representations: The role of the human superior parietal lobe

In sensorimotor integration, sensory input and motor output signals are combined to provide an internal estimate of the state of both the world and one's own body. Although a single perceptual and motor snapshot can provide information about the current state, computational models show that the state can be optimally estimated by a recursive process in which an internal estimate is maintained and updated by the current sensory and motor signals. These models predict that an internal state estimate is maintained or stored in the brain. Here we report a patient with a lesion of the superior parietal lobe who shows both sensory and motor deficits consistent with an inability to maintain such an internal representation between updates. Our findings suggest that the superior parietal lobe is critical for sensorimotor integration, by maintaining an internal representation of the body's state.