Studies on friction and formation of transfer layer when Al-4Mg alloy pins slid at various numbers of cycles on steel plates of different surface texture

In the present investigation, various kinds of textures, namely, unidirectional, 8-ground, and random were attained on the die surfaces. Roughness of the textures was varied using different grits of emery papers or polishing powders. Then pins made of Al-4Mg alloys were slid against steel plates at various numbers of cycles, namely 1, 2, 6, 10 and 20 under both dry and lubricated conditions using an inclined pin-on-plate sliding tester. The morphologies of the worn surfaces of the pins and the formation of transfer layer on the counter surfaces were observed using a scanning electron microscope. Surface roughness parameters of the plate were measured using an optical profilometer. It was observed that the coefficient of friction and formation of transfer layer during the first few cycles depend on the die surface textures under both dry and lubricated conditions. It was also observed that under lubricated condition, the coefficient of friction decreases with number of cycles for all kinds of textures. However, under dry condition, it ecreases for unidirectional and 8-ground surfaces while for random surfaces it increases with number of cycles

Austropleospora osteospermi gen. et sp nov and its host specificity and distribution on Chrysanthemoides monilifera ssp rotundata in Australia.

Hendersonia osteospermi was found for the first time in Australia on leaf spots of the introduced invasive plant Chrysanthemoides monilifera ssp. rotundata (bitou bush) in coastal regions of New South Wales. Pathogenicity tests on species from 11 tribes in the family Asteraceae, demonstrated that H. osteospermi caused severe necrosis on leaves and stems of C. monilifera ssp. rotundata and its congener C. monilifera ssp. monilifera (boneseed). Small necrotic spots also developed on Osteospermum fruticosum and Dimorphotheca cuneata in the Calenduleae and on Helianthus annuus (sunflower) in the Heliantheae. None of the other plant species tested developed leaf spots, although H. osteospermi was re-isolated from senescent leaves of Cynara scolymus (globe artichoke) in the Cynareae and Vernonia cinerea in the Vernonieae. Single ascospores from ascomata of a Pleospora-like fungus found on diseased stems of bitou bush produced H. osteospermi in culture, which proved the anamorph/teleomorph connection. The ITS region of both a single-ascospore isolate and a single-conidium isolate were sequenced and found to be identical. The taxonomic status of H. osteospermi is re-examined and Austropleospora osteospermi gen. et sp. nov. is described as its teleomorph based on morphology, host range tests and DNA sequence analysis. The potential of A. osteospermi for the biological control of bitou bush and boneseed in Australia is discussed.

Continuation of limit cycles near saddle homoclinic points using splines in phase space

We present a new algorithm for continuation of limit cycles of autonomous systems as a system parameter is varied. The algorithm works in phase space with an ordered set of points on the limit cycle, along with spline interpolation. Currently popular algorithms in bifurcation analysis packages compute time-domain approximations of limit cycles using either shooting or collocation. The present approach seems useful for continuation near saddle homoclinic points, where it encounters a corner while time-domain methods essentially encounter a discontinuity (a relatively short period of rapid variation). Other phase space-based algorithms use rescaled arclength in place of time, but subsequently resemble the time-domain methods. Compared to these, we introduce additional freedom through a variable stretching of arclength based on local curvature, through the use of an auxiliary index-based variable. Several numerical examples are presented. Comparisons with results from the popular package, MATCONT, are favorable close to saddle homoclinic points.

Critically endangered Pristis microdon (Elasmobranchii), as a host for the Indian parasitic copepod, Caligus furcisetifer Redkar, Rangnekar et Murti, 1949 (Siphonostomatoida): New records from northern Australia.

This paper presents the first records of the parasitic copepod Caligus furcisetifer Redkar, Rangnekar et Murti, 1949 beyond Indian waters, specifically, on the body surface and head of the critically endangered largetooth sawfish (commonly referred to as the freshwater sawfish in Australia), Pristis microdon Latham, 1794 (Elasmobranchii, Pristidae), in brackish tidal waters of the Fitzroy River in the Kimberley region of Western Australia and the Leichhardt River in the Gulf of Carpentaria in northern Queensland. This represents a geographic range extension of similar to 8000 km for this parasite. Further, it is only the second member of the genus Caligus to be found on an elasmobranch host in Western Australia and it is the first time this species has been reported from the Southern Hemisphere. Male biased dispersal of P microdon may be the vector in which the parasite has dispersed from India across to northern Australia, or vice versa. A decline in populations of the critically endangered P microdon (and possibly other pristid species) in these regions may lead to a concomitant decline in their parasite fauna.

Solutions for archiving data in long-term studies: A reply to Whitlock et al.

In our recent paper [1], we discussed some potential undesirable consequences of public data archiving (PDA) with specific reference to long-term studies and proposed solutions to manage these issues. We reaffirm our commitment to data sharing and collaboration, both of which have been common and fruitful practices supported for many decades by researchers involved in long-term studies. We acknowledge the potential benefits of PDA (e.g., [2]), but believe that several potential negative consequences for science have been underestimated [1] (see also 3 and 4). The objective of our recent paper [1] was to define practices to simultaneously maximize the benefits and minimize the potential unwanted consequences of PDA.

Sustainable life cycles of natural-precursor-derived nanocarbons

Sustainable societal and economic development relies on novel nanotechnologies that offer maximum efficiency at minimal environmental cost. Yet, it is very challenging to apply green chemistry approaches across the entire life cycle of nanotech products, from design and nanomaterial synthesis to utilization and disposal. Recently, novel, efficient methods based on nonequilibrium reactive plasma chemistries that minimize the process steps and dramatically reduce the use of expensive and hazardous reagents have been applied to low-cost natural and waste sources to produce value-added nanomaterials with a wide range of applications. This review discusses the distinctive effects of nonequilibrium reactive chemistries and how these effects can aid and advance the integration of sustainable chemistry into each stage of nanotech product life. Examples of the use of enabling plasma-based technologies in sustainable production and degradation of nanotech products are discussed—from selection of precursors derived from natural resources and their conversion into functional building units, to methods for green synthesis of useful naturally degradable carbon-based nanomaterials, to device operation and eventual disintegration into naturally degradable yet potentially reusable byproducts.

Omnidemptus affinis gen et sp. nov., teleomorph of Mycoleptodiscus affinis sp. nov

Omnidemptus is described as a new monotypic genus of ascomycetes and O. affinis isolated from leaves of Panici effusi var. effusi in Queensland, Australia, is shown to have as its anamorph a new species of the hyphomycete genus Mycoleptodiscus, M. affinis.

Johnalcornia gen. et. comb. nov., and nine new combinations in Curvularia based on molecular phylogenetic analysis

An examination of ex-type and authentic cultures of 34 species of Bipolaris and Curvularia by phylogenetic analysis of four loci (EF-1α, GAPDH, ITS and LSU) resulted in nine new combinations in Curvularia, as well as new synonymies for some species of Bipolaris and Curvularia. Lectotypes are designated for Bipolaris secalis and Curvularia richardiae, and an epitype is designated for Curvularia crustacea. A new monotypic genus, Johnalcornia, is introduced to accommodate Bipolaris aberrans, which clusters sister to the newly described Porocercospora. Johnalcornia differs morphologically from this taxon by producing distinctive conidia-like chlamydospores as well as comparatively thick-walled, geniculate conidiophores, with conidiogenous cells that have conspicuous scars. Johnalcornia further differs from related genera by forming the second conidial septum in the apical cell.