879 resultados para Critical power and velocity
Resumo:
The extension of Boltzmann-Gibbs thermostatistics, proposed by Tsallis, introduces an additional parameter q to the inverse temperature beta. Here, we show that a previously introduced generalized Metropolis dynamics to evolve spin models is not local and does not obey the detailed energy balance. In this dynamics, locality is only retrieved for q = 1, which corresponds to the standard Metropolis algorithm. Nonlocality implies very time-consuming computer calculations, since the energy of the whole system must be reevaluated when a single spin is flipped. To circumvent this costly calculation, we propose a generalized master equation, which gives rise to a local generalized Metropolis dynamics that obeys the detailed energy balance. To compare the different critical values obtained with other generalized dynamics, we perform Monte Carlo simulations in equilibrium for the Ising model. By using short-time nonequilibrium numerical simulations, we also calculate for this model the critical temperature and the static and dynamical critical exponents as functions of q. Even for q not equal 1, we show that suitable time-evolving power laws can be found for each initial condition. Our numerical experiments corroborate the literature results when we use nonlocal dynamics, showing that short-time parameter determination works also in this case. However, the dynamics governed by the new master equation leads to different results for critical temperatures and also the critical exponents affecting universality classes. We further propose a simple algorithm to optimize modeling the time evolution with a power law, considering in a log-log plot two successive refinements.
Resumo:
Objective. - The aim of this study was to verify the relationship of aerobic and neuromuscular indexes with specific situations in judo. Method. - Eighteen male judokas took part in the study. The following assessments were performed: vertical jump (CMJ) on a force platform; Special Judo Fitness Test (SJFT) to obtain the number of throws and percentage of the maximal heart rate (%HRmax) one minute after the test; match simulation to obtain the peak blood lactate (LACmax) and the percentage of the blood lactate removal (BLR); incremental test to obtain the velocity at the anaerobic threshold (vAT) and peak velocity (PV) reached in the test. Results. - A significant correlation was observed between the number of throws in the SJFT, the vAT (r = 0.60; P < 0.01), PV (r = 0.70; P < 0.01) and CMJ (r = 0.74; P < 0.01). A significant inverse correlation was found between the LACmax and vAT (r = -0.59; P = 0.01). Conclusions. - It can be concluded that the performance in the SJFT was determined by the aerobic capacity and power and the muscle power. Athletes with greater aerobic ability (vAT) presented lower blood lactate accumulation after the match. (c) 2011 Elsevier Masson SAS. All rights reserved.
Resumo:
This study analyzed the newly formed bone tissue after application of recombinant human BMP-2 (rhBMP-2) and P-1 (extracted from Hevea brasiliensis) proteins, 2 weeks after the creation of a critical bone defect in male Wistar rats treated or not with a low-intensity laser (GaAlAs 780 nm, 60 mW of power, and energy density dose of 30 J/cm2). The animals were divided into two major groups: (1) bone defect plus low-intensity laser treatment and (2) bone defect without laser irradiation. The following subgroups were also analyzed: (a) 5 mu g of pure rhBMP-2; (b) 5 mu g of pure P-1 fraction; (c) 5 mu g of rhBMP-2/monoolein gel; (d) 5 mu g of P-1 fraction/monoolein gel; (e) pure monoolein gel. Comparisons of the groups receiving laser treatment with those that did not receive laser irradiation show differences in the areas of new bone tissue. The group treated with 5 mu g of rhBMP-2 and laser irradiation was not significantly different (P >0.05) than the nonirradiated group that received the same treatment. The irradiated, rhBMP-2/monoolein gel treatment group showed a lower area of bone formation than the nonirradiated, rhBMP-2/gel monoolein treatment group (P < 0.001). The area of new bone tissue in the other nonirradiated and irradiated groups was not significantly different (P > 0.05). Furthermore, the group that received the 5 mu g of rhBMP-2 application showed the greatest bone formation. We conclude that the laser treatment did not interfere with the area of new bone tissue growth and that the greatest stimulus for bone formation involved application of the rhBMP-2 protein. Microsc. Res. Tech. 2011. (c) 2011 Wiley Periodicals, Inc.
Resumo:
Survival during the early life stages of marine species, including nearshore temperate reef fishes, is typically very low, and small changes in mortality rates, due to physiological and environmental conditions, can have marked effects on survival of a cohort and, on a larger scale, on the success of a recruitment season. Moreover, trade offs between larval growth and accumulation of energetic resources prior to settlement are likely to influence growth and survival until this critical period and afterwards. Rockfish recruitment rates are notoriously variable between years and across geographic locations. Monitoring of rates of onshore delivery of pelagic juveniles (defined here as settlement) of two species of nearshore rockfishes, Sebastes caurinus and Sebastes carnatus, was done between 2003-2009 years using artificial collectors placed at San Miguel and Santa Cruz Island, off Southern California coast. I investigated spatiotemporal variation in settlement rate, lipid content, pelagic larval duration and larval growth of the newly settled fishes; I assessed relationships between birth date, larval growth, early life-history characteristics and lipid content at settlement, considering also interspecific differences; finally, I attempt to relate interannual patterns of settlement and of early life history traits to easily accessible, local and regional indices of ocean conditions including in situ ocean temperature and regional upwelling, sea surface temperature (SST) and Chlorophyll-a (Chl-a) concentration. Spatial variations appeared to be of low relevance, while significant interannual differences were detected in settlement rate, pelagic larval duration and larval growth. The amount of lipid content of the newly settled fishes was highly variable in space and time, but did not differ between the two species and did not show any relationships with early life history traits, indicating that no trade off involved these physiological processes or they were masked by high individual variability in different periods of larval life. Significant interspecific differences were found in the timing of parturition and settlement and in larval growth rates, with S. carnatus growing faster and breeding and settling later than S. caurinus. The two species exhibited also different patterns of correlations between larval growth rates and larval duration. S. carnatus larval duration was longer when the growth in the first two weeks post-hatch was faster, while S. caurinus had a shorter larval duration when grew fast in the middle and in the end of larval life, suggesting different larval strategies. Fishes with longer larval durations were longer in size at settlement and exhibited longer planktonic phase in periods of favourable environmental conditions. Ocean conditions had a low explanatory power for interannual variation in early life history traits, but a very high explanatory power for settlement fluctuations, with regional upwelling strength being the principal indicator. Nonetheless, interannual variability in larval duration and growth were related to great phenological changes in upwelling happened during the period of this study and that caused negative consequences at all trophic levels along the California coast. Despite the low explanatory power of the environmental variables used in this study on the variation of larval biological traits, environmental processes were differently related with early life history characteristics analyzed to species, indicating possible species-specific susceptibility to ocean conditions and local environmental adaptation, which should be further investigated. These results have implications for understanding the processes influencing larval and juvenile survival, and consequently recruitment variability, which may be dependent on biological characteristics and environmental conditions.
Resumo:
This thesis starts showing the main characteristics and application fields of the AlGaN/GaN HEMT technology, focusing on reliability aspects essentially due to the presence of low frequency dispersive phenomena which limit in several ways the microwave performance of this kind of devices. Based on an equivalent voltage approach, a new low frequency device model is presented where the dynamic nonlinearity of the trapping effect is taken into account for the first time allowing considerable improvements in the prediction of very important quantities for the design of power amplifier such as power added efficiency, dissipated power and internal device temperature. An innovative and low-cost measurement setup for the characterization of the device under low-frequency large-amplitude sinusoidal excitation is also presented. This setup allows the identification of the new low frequency model through suitable procedures explained in detail. In this thesis a new non-invasive empirical method for compact electrothermal modeling and thermal resistance extraction is also described. The new contribution of the proposed approach concerns the non linear dependence of the channel temperature on the dissipated power. This is very important for GaN devices since they are capable of operating at relatively high temperatures with high power densities and the dependence of the thermal resistance on the temperature is quite relevant. Finally a novel method for the device thermal simulation is investigated: based on the analytical solution of the tree-dimensional heat equation, a Visual Basic program has been developed to estimate, in real time, the temperature distribution on the hottest surface of planar multilayer structures. The developed solver is particularly useful for peak temperature estimation at the design stage when critical decisions about circuit design and packaging have to be made. It facilitates the layout optimization and reliability improvement, allowing the correct choice of the device geometry and configuration to achieve the best possible thermal performance.
Resumo:
This in situ study evaluated the discriminatory power and reliability of methods of dental plaque quantification and the relationship between visual indices (VI) and fluorescence camera (FC) to detect plaque.
Resumo:
PURPOSE OF REVIEW: Critical incident reporting alone does not necessarily improve patient safety or even patient outcomes. Substantial improvement has been made by focusing on the further two steps of critical incident monitoring, that is, the analysis of critical incidents and implementation of system changes. The system approach to patient safety had an impact on the view about the patient's role in safety. This review aims to analyse recent advances in the technique of reporting, the analysis of reported incidents, and the implementation of actual system improvements. It also explores how families should be approached about safety issues. RECENT FINDINGS: It is essential to make as many critical incidents as possible known to the intensive care team. Several factors have been shown to increase the reporting rate: anonymity, regular feedback about the errors reported, and the existence of a safety climate. Risk scoring of critical incident reports and root cause analysis may help in the analysis of incidents. Research suggests that patients can be successfully involved in safety. SUMMARY: A persisting high number of reported incidents is anticipated and regarded as continuing good safety culture. However, only the implementation of system changes, based on incident reports, and also involving the expertise of patients and their families, has the potential to improve patient outcome. Hard outcome criteria, such as standardized mortality ratio, have not yet been shown to improve as a result of critical incident monitoring.
Resumo:
Previous studies have shown both declining and stable semantic-memory abilities during healthy aging. There is consistent evidence that semantic processes involving controlled mechanisms weaken with age. In contrast, results of aging studies on automatic semantic retrieval are often inconsistent, probably due to methodological limitations and differences. The present study therefore examines age-related alterations in automatic semantic retrieval and memory structure with a novel combination of critical methodological factors, i.e., the selection of subjects, a well-designed paradigm, and electrophysiological methods that result in unambiguous signal markers. Healthy young and elderly participants performed lexical decisions on visually presented word/non-word pairs with a stimulus onset asynchrony (SOA) of 150 ms. Behavioral and electrophysiological data were measured, and the N400-LPC complex, an event-related potential component sensitive to lexical-semantic retrieval, was analyzed by power and topographic distribution of electrical brain activity. Both age groups exhibited semantic priming (SP) and concreteness effects in behavioral reaction time and the electrophysiological N400-LPC complex. Importantly, elderly subjects did not differ significantly from the young in their lexical decision and SP performances as well as in the N400-LPC SP effect. The only difference was an age-related delay measured in the N400-LPC microstate. This could be attributed to existing age effects in controlled functions, as further supported by the replicated age difference in word fluency. The present results add new behavioral and neurophysiological evidence to earlier findings, by showing that automatic semantic retrieval remains stable in global signal strength and topographic distribution during healthy aging.
Resumo:
Post-soviet countries are in the process of transformation from a totalitarian order to a democratic one, a transformation which is impossible without a profound shift in people's way of thinking. The group set themselves the task of determining the essence of this shift. Using a multidisciplinary approach, they looked at concrete ways of overcoming the totalitarian mentality and forming that necessary for an open democratic society. They studied the contemporary conceptions of tolerance and critical thinking and looked for new foundations of criticism, especially in hermeneutics. They then sought to substantiate the complementary relation between tolerance and criticism in the democratic way of thinking and to prepare a a syllabus for teaching on the subject in Ukrainian higher education. In a philosophical exploration of tolerance they began with relgious tolerance as its first and most important form. Political and social interests often lay at the foundations of religious intolerance and this implicitly comprised the transition to religious tolerance when conditions changed. Early polytheism was more or less indifferent to dogmatic deviations but monotheism is intolerant of heresies. The damage wrought by the religious wars of the Reformations transformed tolerance into a value. They did not create religious tolerance but forced its recognition as a positive phenomenon. With the weakening of religious institutions in the modern era, the purely political nature of many conflicts became evident and this stimulated the extrapolation of tolerance into secular life. Each historical era has certain acts and operations which may be interpreted as tolerant and these can be classified as to whether or not they are based on the conscious following of the principle of tolerance. This criterion requires the separation of the phenomenon of tolerance from its concept and from tolerance as a value. Only the conjunction of a concept of tolerance with a recognition of its value can transform it into a principle dictating a norm of conscious behaviour. The analysis of the contemporary conception of tolerance focused on the diversity of the concept and concluded that the notions used cannot be combined in the framework of a single more or less simple classification, as the distinctions between them are stimulated by the complexity of the realty considered and the variety of its manifestations. Notions considered in relation to tolerance included pluralism, respect and particular-universal. The rationale of tolerance was also investigated and the group felt that any substantiation of the principle of tolerance must take into account human beings' desire for knowledge. Before respecting or being tolerant of another person different from myself, I should first know where the difference lies, so knowledge is a necessary condition of tolerance.The traditional division of truth into scientific (objective and unique) and religious, moral, political (subjective and so multiple) intensifies the problem of the relationship between truth and tolerance. Science was long seen as a field of "natural" intolerance whereas the validity of tolerance was accepted in other intellectual fields. As tolerance eemrges when there is difference and opposition, it is essentially linked with rivaly and there is a a growing recognition today that unlimited rivalry is neither able to direct the process of development nor to act as creative matter. Social and economic reality has led to rivalry being regulated by the state and a natural requirement of this is to associate tolerance with a special "purified" form of rivalry, an acceptance of the actiivity of different subjects and a specification of the norms of their competition. Tolerance and rivalry should therefore be subordinate to a degree of discipline and the group point out that discipline, including self-discipline, is a regulator of the balance between them. Two problematic aspects of tolerance were identified: why something traditionally supposed to have no positive content has become a human activity today, and whether tolerance has full-scale cultural significance. The resolution of these questions requires a revision of the phenomenon and conception of tolerance to clarify its immanent positive content. This involved an investigation of the contemporary concept of tolerance and of the epistemological foundations of a negative solution of tolerance in Greek thought. An original soution to the problem of the extrapolation of tolerance to scientific knowledge was proposed based on the Duhem-Quine theses and conceptiion of background knowledge. In this way tolerance as a principle of mutual relations between different scientific positions gains an essential epistemological rationale and so an important argument for its own universal status. The group then went on to consider the ontological foundations for a positive solution of this problem, beginning with the work of Poincare and Reichenbach. The next aspect considered was the conceptual foundations of critical thinking, looking at the ideas of Karl Popper and St. Augustine and at the problem of the demarcation line between reasonable criticism and apologetic reasoning. Dogmatic and critical thinking in a political context were also considered, before an investigation of critical thinking's foundations. As logic is essential to critical thinking, the state of this discipline in Ukrainian and Russian higher education was assessed, together with the limits of formal-logical grounds for criticism, the role of informal logical as a basis for critical thinking today, dialectical logic as a foundation for critical thinking and the universality of the contemporary demand for criticism. The search for new foundations of critical thinking covered deconstructivism and critical hermeneutics, including the problem of the author. The relationship between tolerance and criticism was traced from the ancient world, both eastern and Greek, through the transitional community of the Renaissance to the industrial community (Locke and Mill) and the evolution of this relationship today when these are viewed not as moral virtues but as ordinary norms. Tolerance and criticism were discussed as complementary manifestations of human freedom. If the completeness of freedom were accepted it would be impossible to avoid recognition of the natural and legal nature of these manifestations and the group argue that critical tolerance is able to avoid dismissing such negative phenomena as the degradation of taste and manner, pornography, etc. On the basis of their work, the group drew up the syllabus of a course in "Logic with Elements of Critical Thinking, and of a special course on the "Problem of Tolerance".
Resumo:
In Western societies the increase in female employment (especially among married women) is seen as having brought about the crisis of the traditional model of the family, reinforcing the position of the "modern" model - the egalitarian family with two working spouses and a "dual-career" family. In contrast, the transitional situation in the post-communist countries during the 1990s is producing a crisis of the family with two working spouses (the basic type of the communist period) and leading to new power relations within the family. While the growth of dual-earner households in this century has implied modification of family models towards greater symmetry of responsibility for breadwinning and homemaking, there is considerable evidence that women's increased employment does not necessarily lead to a more egalitarian approach to gender roles within the family. The group set out to investigate the economic situation of families and economic power within the fame as a crucial factor in the transformation of families with two working spouses in order to reveal the specific patterns of gender contracts and power relations within the family that are emerging in response to the current political and economic transformation. They opted for a comparative approach, selecting the Czech Republic as a country where the very similar tendencies of a few years ago (almost 100% of women employed and the family as a realm of considerable private freedom where both women's and men's gender identities and the traditional distribution of family responsibilities were largely preserved) are combined with a very different experience in terms of economic inequalities during the 1990s to that of Russia. In the first stage of the study they surveyed 300 married couples (150 in each country) on the question of breadwinning. They then carried out in-depth interviews with 10 couples from each country (selected from among the educated layers of the population), focusing on the process of the social construction of gender, using breadwinning and homemaking as gender boundaries which distinguish men from women. By analysing changes in social position and the type of interpersonal interaction of spouses they distinguished two main types of family contracts: the neo-traditional "communal sharing" (with male breadwinner, traditional distribution of family chores and negotiated family power) and the modern one based on negotiated agreement. The most important pre-conditions of husband-wife agreement about breadwinning seemed to imply their overall gender ideology rather than the economic and/or family circumstances. In general, wives were more likely to express egalitarian views, supporting the blurring or even elimination of many gender boundaries. Husbands, on the other hand, more often gave responses calling for the continued maintenance of gender boundaries. The analysis showed that breadwinning is still an important gender boundary in these cultures, one that is assumed unless it is explicitly questioned and that is seen as part of what makes a man a "real man". The majority of respondents seemed to be committed to egalitarian ideology on gender roles and the distribution of family tasks, including decision making, but this is contradicted by the persistent idea of the husband as the breadwinner. This contradiction is more characteristic of the Russian situation than of the Czech. The quantitative study showed a difference in prevailing family models between the two countries, with a clearer shift towards the traditional family contract in the Russian case. The Czechs were more likely to consider their partnerships as based on negotiated agreement, while the Russians saw theirs as based on egalitarian contract, in both cases seeing this as the norm. The majority of couples said they felt satisfied with their marriage, although in both countries wives seemed to be less satisfied. There was however a difference in the issues that aroused dissatisfaction, with Czech women being more sensitive to issues such as self-realisation, personal independence, understanding and recognition in the family, and Russians to issues of love, understanding and recognition. The most disputed area for the majority of families was chores in the home, presumably because in many families both husband and wife were working hard outside the home and because a number of partners had differing views as to the ideal distribution of chores within the family. The distribution of power in the family seems to be linked to the level of well being. The analysis showed that in the dominant democratic model there is still an inverse connection between family leadership and well being: the more prominent the wife's position as head of the family is, the lower the level of family income. This may reflect both the husband's refusal to play the leading role in the family and even his rejection of any involvement in family issues in such a family. The qualitative research revealed that both men and women see the breadwinning role to be an essential part of masculine identity, a role which the female partner would take on temporarily to assist the male but not permanently since this would threaten the gender boundaries and the man's identity. At the same time, few breadwinners expressed a sense of job satisfaction and all considered their choice as imposed on them by the circumstances (i.e. having a family in difficult times). The group feel that family orientation and some loss of personal involvement in their profession is partly reflected in the fact that many of the men felt more comfortable and self-confident at home than at work. Women's work, on the other hand, was largely seen as a source of personal and self-realisation and social life. Eight out of ten of the Russian women interviewed were employed, although only two on a full-time basis, but none saw their jobs as adding substantially to the family budget. Both partners see the most important factor as the wife's wish to work or stay at home, and do not think it wise for the wife to work at the expense of her part of the "family contract", although husbands from the "egalitarian" relationships expressed more willingness to compromise. The analysis showed clearly that wives and husbands did not construct gender boundaries in isolation, with the interviews providing clear evidence of negotiation. At the same time, husbands' interpretations of their wives' employment were less susceptible to the influence of negotiation than were their gender attitudes and norms about breadwinning. One of the most interesting aspects of the spouses' negotiations was the extent to which they disagreed about what they seemed to have agreed upon. Most disagreements about the breadwinning boundaries, however, were over norms and were settled by changes in norms rather than in behavioural interpretation. Changes in norms were often a form of peace offering or were in response in changes in circumstances. The study did show, however, that many of the efforts at cooperation and compensation were more symbolic than real and the group found the plasticity of expressed gender ideology to be one of the most striking findings of their work. They conclude that the shift towards more traditional gednder distributions of incomes and domestic chores does not automatically mean the reestablishment of a patriarchal model of family power. On the contrary, it seems to be a compromise formation, relatively unstable, temporary and containing self-defeating forces as the split between the personal and professional value of work and its social value expressed in a money equivalent cannot be maintained for generations.
Resumo:
The concordance probability is used to evaluate the discriminatory power and the predictive accuracy of nonlinear statistical models. We derive an analytic expression for the concordance probability in the Cox proportional hazards model. The proposed estimator is a function of the regression parameters and the covariate distribution only and does not use the observed event and censoring times. For this reason it is asymptotically unbiased, unlike Harrell's c-index based on informative pairs. The asymptotic distribution of the concordance probability estimate is derived using U-statistic theory and the methodology is applied to a predictive model in lung cancer.
Resumo:
Though 3D computer graphics has seen tremendous advancement in the past two decades, most available mechanisms for computer interaction in 3D are high cost and targeted for industry and virtual reality applications. Recent advances in Micro-Electro-Mechanical-System (MEMS) devices have brought forth a variety of new low-cost, low-power, miniature sensors with high accuracy, which are well suited for hand-held devices. In this work a novel design for a 3D computer game controller using inertial sensors is proposed, and a prototype device based on this design is implemented. The design incorporates MEMS accelerometers and gyroscopes from Analog Devices to measure the three components of the acceleration and angular velocity. From these sensor readings, the position and orientation of the hand-held compartment can be calculated using numerical methods. The implemented prototype is utilizes a USB 2.0 compliant interface for power and communication with the host system. A Microchip dsPIC microcontroller is used in the design. This microcontroller integrates the analog to digital converters, the program memory flash, as well as the core processor, on a single integrated circuit. A PC running Microsoft Windows operating system is used as the host machine. Prototype firmware for the microcontroller is developed and tested to establish the communication between the design and the host, and perform the data acquisition and initial filtering of the sensor data. A PC front-end application with a graphical interface is developed to communicate with the device, and allow real-time visualization of the acquired data.
Resumo:
We hypothesized that the spatial distribution of groundwater inflows through river bottom sediments is a critical factor associated with the selection of coaster brook trout (a life history variant of Salvelinus fontinalis,) spawning sites. An 80-m reach of the Salmon Trout River, in the Huron Mountains of the upper peninsula of Michigan, was selected to test the hypothesis based on long-term documentation of coaster brook trout spawning at this site. Throughout this site, the river is relatively similar along its length with regard to stream channel and substrate features. A monitoring well system consisting of an array of 27 wells was installed to measure subsurface temperatures underneath the riverbed over a 13-month period. The monitoring well locations were separated into areas where spawning has and has not been observed. Over 200,000 total temperature measurements were collected from 5 depths within each of the 27 monitoring wells. Temperatures within the substrate at the spawning area were generally cooler and less variable than river temperatures. Substrate temperatures in the non-spawning area were generally warmer, more variable, and closely tracked temporal variations in river temperatures. Temperature data were inverted to obtain subsurface groundwater velocities using a numerical approximation of the heat transfer equation. Approximately 45,000 estimates of groundwater velocities were obtained. Estimated velocities in the spawning and non-spawning areas confirmed that groundwater velocities in the spawning area were primarily in the upward direction, and were generally greater in magnitude than velocities in the non-spawning area. In the non-spawning area there was a greater occurrence of velocities in the downward direction, and velocity estimates were generally lesser in magnitude than in the spawning area. Both the temperature and velocity results confirm the hypothesis that spawning sites correspond to areas of significant groundwater influx to the river bed.
Resumo:
Graphene, which is a two-dimensional carbon material, exhibits unique properties that promise its potential applications in photovoltaic devices. Dye-sensitized solar cell (DSSC) is a representative of the third generation photovoltaic devices. Therefore, it is important to synthesize graphene with special structures, which possess excellent properties for dye-sensitized solar cells. This dissertation research was focused on (1) the effect of oxygen content on the structure of graphite oxide, (2) the stability of graphene oxide solution, (3) the application of graphene precipitate from graphene oxide solution as counter electrode for DSSCs, (4) the development of a novel synthesis method for the three-dimensional graphene with honeycomb-like structure, and (5) the exploration of honeycomb structured graphene (HSG) as counter electrodes for DSSCs. Graphite oxide is a crucial precursor to synthesize graphene sheets via chemical exfoliation method. The relationship between the oxygen content and the structures of graphite oxides was still not explored. In this research, the oxygen content of graphite oxide is tuned by changing the oxidation time and the effect of oxygen content on the structure of graphite oxide was evaluated. It has been found that the saturated ratio of oxygen to carbon is 0.47. The types of functional groups in graphite oxides, which are epoxy, hydroxyl, and carboxylgroups, are independent of oxygen content. However, the interplanar space and BET surface area of graphite oxide linearly increases with increasing O/C ratio. Graphene oxide (GO) can easily dissolve in water to form a stable homogeneous solution, which can be used to fabricate graphene films and graphene based composites. This work is the first research to evaluate the stability of graphene oxide solution. It has been found that the introduction of strong electrolytes (HCl, LiOH, LiCl) into GO solution can cause GO precipitation. This indicates that the electrostatic repulsion plays a critical role in stabilizing aqueous GO solution. Furthermore, the HCl-induced GO precipitation is a feasible approach to deposit GO sheets on a substrate as a Pt-free counter electrode for a dye-sensitized solar cell (DSSC), which exhibited 1.65% of power conversion efficiency. To explore broad and practical applications, large-scale synthesis with controllable integration of individual graphene sheets is essential. A novel strategy for the synthesis of graphene sheets with three-dimensional (3D) Honeycomb-like structure has been invented in this project based on a simple and novel chemical reaction (Li2O and CO to graphene and Li2CO3). The simultaneous formation of Li2CO3 with graphene not only can isolate graphene sheets from each other to prevent graphite formation during the process, but also determine the locally curved shape of graphene sheets. After removing Li2CO3, 3D graphene sheets with a honeycomb-like structure were obtained. This would be the first approach to synthesize 3D graphene sheets with a controllable shape. Furthermore, it has been demonstrated that the 3D Honeycomb-Structured Graphene (HSG) possesses excellent electrical conductivity and high catalytic activity. As a result, DSSCs with HSG counter electrodes exhibit energy conversion efficiency as high as 7.8%, which is comparable to that of an expensive noble Pt electrode.
Resumo:
We evaluated the muscular strength, endurance, and power responses of 12 college students, ranging in age from 19-40 years, who participated in a 6-wk high-intensity training program commonly used to improve muscular endurance. Muscular strength was measured by a one repetition maximum (1RM) bench press test and a 1RM Hammer bench press test; muscular endurance was measured by administering a 70-percent 1RM test to failure on the Hammer bench press; and upper body power was measured by adminstering a medicine ball throw test. We observed a 4.8-percent improvement of 2.7 kg on the bench press, a 14.6-percent improvement of 10.5 kg on the Hammer bench press, a 45.5-percent improvement with an average increase of five repetitions on the submaximal test to failure and an average improvement of ~ 20 percent, 60 cm, for the medicine ball throw. Foe our subjects, a commonly used high-intensity training muscular endurance program resulted in improved performance on tests measuring muscular strength, endurance, and power, and resulted in zero reported injuries during training or assessment procedures.