Comparison of nitrogen adsorption at 77 K on non-porous silica and pore wall of MCM-41 materials by means of density functional theory

Nitrogen adsorption on a surface of a non-porous reference material is widely used in the characterization. Traditionally, the enhancement of solid-fluid potential in a porous solid is accounted for by incorporating the surface curvature into the solid-fluid Potential of the flat reference surface. However, this calculation procedure has not been justified experimentally. In this paper, we derive the solid-fluid potential of mesoporous MCM-41 solid by using solely the adsorption isotherm of that solid. This solid-fluid potential is then compared with that of the non-porous reference surface. In derivation of the solid-fluid potential for both reference surface and mesoporous MCM-41 silica (diameter ranging front 3 to 6.5 nm) we employ the nonlocal density functional theory developed for amorphous solids. It is found that, to out, surprise, the solid-fluid potential of a porous solid is practically the same as that for the reference surface, indicating that there is no enhancement due to Surface curvature. This requires further investigations to explain this unusual departure from our conventional wisdom of curvature-induced enhancement. Accepting the curvature-independent solid-fluid potential derived from the non-porous reference surface, we analyze the hysteresis features of a series of MCM-41 samples. (c) 2005 Elsevier Inc. All rights reserved.

The survey for ionization in neutral gas galaxies. II. The star formation rate density of the local universe

We derive observed H alpha and R-band luminosity densities of an H I-selected sample of nearby galaxies using the SINGG sample to be l'(H alpha) = (9.4 +/- 1.8) x 10(38) h(70) ergs s(-1) Mpc(-3) for H alpha and l'(R) = (4.4 +/- 9.7) x 10(37) h(70) ergs s(-1) angstrom(-1) Mpc(-3) in the R band. This R-band luminosity density is approximately 70% of that found by the Sloan Digital Sky Survey. This leads to a local star formation rate density of log ((rho)over dot(SFR) [M-circle dot yr(-1) Mpc(-3)]) = -1.80(-0.07)(+0.13)(random) +/- 0.03(systematic) + log (h(70)) after applying a mean internal extinction correction of 0.82 mag. The gas cycling time of this sample is found to be t(gas) = 7.5(-2.1)(+1.3) Gyr, and the volume-averaged equivalent width of the SINGG galaxies is EW(H alpha) = 28.8(-4.7)(+7.2) angstrom (21.2-3.5+4.2 angstrom without internal dust correction). As with similar surveys, these results imply that (rho)over dot(SFR)(z) decreases drastically from z similar to 1.5 to the present. A comparison of the dynamical masses of the SINGG galaxies evaluated at their optical limits with their stellar and H I masses shows significant evidence of downsizing: the most massive galaxies have a larger fraction of their mass locked up in stars compared with H I, while the opposite is true for less massive galaxies. We show that the application of the Kennicutt star formation law to a galaxy having the median orbital time at the optical limit of this sample results in a star formation rate decay with cosmic time similar to that given by the. (rho)over dot(SFR)(z) evolution. This implies that the (rho)over dot(SFR)(z) evolution is primarily due to the secular evolution of galaxies, rather than interactions or mergers. This is consistent with the morphologies predominantly seen in the SINGG sample.

Electrostatically mediated specific adsorption of small molecules in metallo-organic frameworks

We investigate the interaction of ethylene and ethane with a Cu-tricarboxylate complex and show that at low loadings the lighter molecule has a higher binding energy as a result of an increased interaction with the framework Cu and stronger hydrogen bonding with the basic framework oxygens. This leads to selective adsorption of ethylene by a factor of about 2 at low pressure, which is overcome by the stronger van der Waals interaction of ethane at high loadings, explaining recent literature data. The results suggest the possibility of separation of light hydrocarbons at low pressures or in trace amounts.

Searching oligo sets of human chromosome 12 using evolutionary strategies

DNA microarray is a powerful tool to measure the level of a mixed population of nucleic acids at one time, which has great impact in many aspects of life sciences research. In order to distinguish nucleic acids with very similar composition by hybridization, it is necessary to design probes with high specificities, i.e. uniqueness, and also sensitivities, i.e., suitable melting temperature and no secondary structure. We make use of available biology tools to gain necessary sequence information of human chromosome 12, and combined with evolutionary strategy (ES) to find unique subsequences representing all predicted exons. The results are presented and discussed.

Structural and cellular characterization of Idiopathic Pulmonary Fibrosis

La Fibrosi Polmonare Idiopatica (IPF) è una malattia polmonare cronica, irreversibile la cui eziologia risulta essere ignota, caratterizzata da un processo fibrotico progressivo che inizia nel tratto respiratorio inferiore. Le persone affette da IPF presentano età media compresa tra 55 e 77 anni. L’incidenza annuale di IPF è stata recentemente stimata tra 14 e 42,7 casi per 100.000 persone e tale dato risulta essere in aumento. IPF fa parte delle malattie Polmonari Idiopatiche Interstiziali (IIP) che comprendono patologie con quadri istologici e clinici differenti. Le affezioni su cui si concentrerà questo studio sono: UIP (Usual Interstitial Pneumonia) caratterizzata da fibrosi interstiziale e dalla presenza di foci fibrotici connessi alla pleura e corrispondente al quadro anatomopatologico della maggior parte dei casi di IPF; NSIP (Non Specific Interstitial Pneumonia) simile alla UIP ma con maggiore uniformità temporale e spaziale delle manifestazioni; Sarcoidosi, malattia granulomatosa ad eziologia ignota. Attualmente la gravità della IPF, che implica una mortalità del 50% dei pazienti a 5 anni dall’esordio, e la scarsa efficacia farmacologica nel rallentarne la progressione vedono il trapianto polmonare come unica possibilità di sopravvivenza nelle forme più severe. Al momento non è chiaro il meccanismo patogenetico di insorgenza e progressione della IPF anche se sono stati individuati alcuni fattori scatenanti quali fumo di sigaretta, infezioni respiratorie e inquinanti atmosferici; tuttavia nessuno di tali elementi può da solo determinare un così esteso e progressivo rimodellamento del parenchima polmonare. Numerose sono le evidenze di come il substrato genetico, le alterazioni del rapporto morte/proliferazione cellulare e le citochine svolgano un ruolo nella genesi e nella progressione della malattia, ma non sono ancora chiari i fenomeni biologico-cellulari che la sostengono e, quindi, quali siano i punti di attacco per poter incidere terapeuticamente nel modificare l’evoluzione della IPF. Poiché il nostro laboratorio ha partecipato alla scoperta dell’esistenza di cellule staminali nel polmone umano normale, uno degli obiettivi finali di questo progetto si basa sull’ipotesi che un’alterazione del compartimento staminale svolga un ruolo cruciale nella eziopatogenesi di IPF. Per questo in precedenti esperienze abbiamo cercato di identificare nella IPF cellule che esprimessero antigeni associati a staminalità quali c-kit, CD34 e CD133. Questo lavoro di tesi si è proposto di condurre un’indagine morfometrica ed immunoistochimica su biopsie polmonari provenienti da 9 pazienti affetti da UIP, 3 da NSIP e 5 da Sarcoidosi al fine di valutare le alterazioni strutturali principali imputabili alle patologie. Preparati istologici di 8 polmoni di controllo sono stati usati come confronto. Come atteso, è stato osservato nelle tre patologie esaminate (UIP, NSIP e Sarcoidosi) un significativo incremento nella sostituzione del parenchima polmonare con tessuto fibrotico ed un ispessimento dei setti alveolari rispetto ai campioni di controllo. L’analisi dei diversi pattern di fibrosi presenti fa emergere come vi sia una netta differenza tra le patologie con una maggiore presenza di fibrosi di tipo riparativo e quindi altamente cellulata nei casi di UIP, e NSIP mentre nelle Sarcoidosi il pattern maggiormente rappresentato è risultato essere quello della fibrosi replacement o sostitutiva. La quantificazione delle strutture vascolari è stata effettuata tenendo separate le aree di polmone alveolare rispetto a quelle occupate da focolai sostitutivi di danno (componente fibrotica). Nei campioni patologici analizzati era presente un significativo riarrangiamento di capillari, arteriole e venule rispetto al polmone di controllo, fenomeno principalmente riscontrato nel parenchima fibrotico. Tali modifiche erano maggiormente presenti nei casi di NSIP da noi analizzati. Inoltre le arteriole subivano una diminuzione di calibro ed un aumento dello spessore in special modo nei polmoni ottenuti da pazienti affetti da Sarcoidosi. Rispetto ai controlli, nella UIP e nella Sarcoidosi i vasi linfatici risultavano inalterati nell’area alveolare mentre aumentavano nelle aree di estesa fibrosi; quadro differente si osservava nella NSIP dove le strutture linfatiche aumentavano in entrambe le componenti strutturali. Mediante indagini immunoistochimiche è stata documentata la presenza e distribuzione dei miofibroblasti, positivi per actina muscolare liscia e vimentina, che rappresentano un importante componente del danno tissutale nella IPF. La quantificazione di questo particolare fenotipo è attualmente in corso. Abbiamo inoltre analizzato tramite immunoistochimica la componente immunitaria presente nei campioni polmonari attraverso la documentazione dei linfociti T totali che esprimono CD3, andando poi a identificare la sottopopolazione di T citotossici esprimenti la glicoproteina CD8. La popolazione linfocitaria CD3pos risultava notevolmente aumentata nelle tre patologie analizzate soprattutto nei casi di UIP e Sarcoidosi sebbene l`analisi della loro distribuzione tra i vari distretti tissutali risultasse differente. Risultati simili si sono ottenuti per l`analisi dei linfociti CD8pos. La componente monocito-macrofagica è stata invece identificata tramite la glicoproteina CD68 che ha messo in evidenza una maggiore presenza di cellule positive nella Sarcoidosi e nella UIP rispetto ai casi di NSIP. I dati preliminari di questo studio indicano che il rimodellamento strutturale emo-linfatico e cellulare infiammatorio nella UIP si differenziano rispetto alle altre malattie interstiziali del polmone, avanzando l’ipotesi che il microambiente vascolare ed immunitario giochino un ruolo importante nella patogenesi della malattia

Performance of small and medium enterprises and the impact of environmental variables: evidence from Vietnam

thesis is developed from a real life application of performance evaluation of small and medium-sized enterprises (SMEs) in Vietnam. The thesis presents two main methodological developments on evaluation of dichotomous environment variable impacts on technical efficiency. Taking into account the selection bias the thesis proposes a revised frontier separation approach for the seminal Data Envelopment Analysis (DEA) model which was developed by Charnes, Cooper, and Rhodes (1981). The revised frontier separation approach is based on a nearest neighbour propensity score matching pairing treated SMEs with their counterfactuals on the propensity score. The thesis develops order-m frontier conditioning on propensity score from the conditional order-m approach proposed by Cazals, Florens, and Simar (2002), advocated by Daraio and Simar (2005). By this development, the thesis allows the application of the conditional order-m approach with a dichotomous environment variable taking into account the existence of the self-selection problem of impact evaluation. Monte Carlo style simulations have been built to examine the effectiveness of the aforementioned developments. Methodological developments of the thesis are applied in empirical studies to evaluate the impact of training programmes on the performance of food processing SMEs and the impact of exporting on technical efficiency of textile and garment SMEs of Vietnam. The analysis shows that training programmes have no significant impact on the technical efficiency of food processing SMEs. Moreover, the analysis confirms the conclusion of the export literature that exporters are self selected into the sector. The thesis finds no significant impact from exporting activities on technical efficiency of textile and garment SMEs. However, large bias has been eliminated by the proposed approach. Results of empirical studies contribute to the understanding of the impact of different environmental variables on the performance of SMEs. It helps policy makers to design proper policy supporting the development of Vietnamese SMEs.

Relationship characteristics within the supply chain of small and medium-sized construction enterprises in Thailand

The Small and Medium-sized construction Enterprises (construction SMEs) in Thailand face challenges like high fragmented structure and low productivity. Many industries improved their business performance using the supply chain integration. This research was conducted by interviewing 14 small and medium Thai building contractors to understand the features and relationship characteristics of the supply chain of construction SMEs. The study reveals that the linkages between the small and medium general contractors and other supply chain members are based on personal trust rather than contract laws, there is no systematic procedure to manage the relationship with clients during the project execution, and social connections help to maintain long-term relationship with clients. Based on the working behaviour and commitment to long-term relationship, six forms of relationship with supply side members are proposed. Finally, improvement measures for the supply chain integration of the construction SMEs in Thailand are presented.

Central regulation of English local authorities:an example of meta-governance?

This paper discusses how the UK government has reconfigured its regulation of English local authorities by moving from direct oversight to using an indirect independent agency as a vehicle of meta-governance. This theme is discussed through two strands: first, by examining how several factors eroded central government's capacity to directly regulate councils. The second strand examines the strategies used by the Audit Commission, an independent agency, to assert its authority over councils and how its hegemony is sustained by facilitating and participating in horizontal and vertical networks across government, specialist policy and stakeholders' communities. © Blackwell Publishing Ltd. 2006.

Discriminating depth in corrugated stereo surfaces: facilitation by a pedestal is explained by removal of uncertainty

With luminance gratings, psychophysical thresholds for detecting a small increase in the contrast of a weak ‘pedestal’ grating are 2–3 times lower than for detection of a grating when the pedestal is absent. This is the ‘dipper effect’ – a reliable improvement whose interpretation remains controversial. Analogies between luminance and depth (disparity) processing have attracted interest in the existence of a ‘disparity dipper’. Are thresholds for disparity modulation (corrugated surfaces), facilitated by the presence of a weak disparity-modulated pedestal? We used a 14-bit greyscale to render small disparities accurately, and measured 2AFC discrimination thresholds for disparity modulation (0.3 or 0.6 c/deg) of a random texture at various pedestal levels. In the first experiment, a clear dipper was found. Thresholds were about 2× lower with weak pedestals than without. But here the phase of modulation (0 or 180 deg) was varied from trial to trial. In a noisy signal-detection framework, this creates uncertainty that is reduced by the pedestal, which thus improves performance. When the uncertainty was eliminated by keeping phase constant within sessions, the dipper effect was weak or absent. Monte Carlo simulations showed that the influence of uncertainty could account well for the results of both experiments. A corollary is that the visual depth response to small disparities is probably linear, with no threshold-like nonlinearity.

Computational mechanics of molecular systems:quantifying high-dimensional dynamics by distribution of Poincaré recurrence times

A framework that connects computational mechanics and molecular dynamics has been developed and described. As the key parts of the framework, the problem of symbolising molecular trajectory and the associated interrelation between microscopic phase space variables and macroscopic observables of the molecular system are considered. Following Shalizi and Moore, it is shown that causal states, the constituent parts of the main construct of computational mechanics, the e-machine, define areas of the phase space that are optimal in the sense of transferring information from the micro-variables to the macro-observables. We have demonstrated that, based on the decay of their Poincare´ return times, these areas can be divided into two classes that characterise the separation of the phase space into resonant and chaotic areas. The first class is characterised by predominantly short time returns, typical to quasi-periodic or periodic trajectories. This class includes a countable number of areas corresponding to resonances. The second class includes trajectories with chaotic behaviour characterised by the exponential decay of return times in accordance with the Poincare´ theorem.

Simultaneous measurement of temperature and external refractive index by use of a hybrid grating in D fiber with enhanced sensitivity by HF etching

We propose a dual-parameter optical sensor device achieved by UV inscription of a hybrid long-period grating-fiber Bragg grating structure in D fiber. The hybrid configuration permits the detection of the temperature from the latter's response and measurement of the external refractive index from the former's response. In addition, the host D fiber permits effective modification of the device's sensitivity by cladding etching. The grating sensor has been used to measure the concentrations of aqueous sugar solutions, demonstrating its potential capability to detect concentration changes as small as 0.01%.

Growth expectations and financial performance of small businesses:evidence from Latvia

By applying regulatory focus theory, this paper investigates the impact of both initial confidence and of exactness of growth expectations on subsequent financial performance of the small firms. Drawing on the unique data set based on the repeated survey design, we make one of the first attempts to explore the complexity of this relationship empirically. Overall the findings suggest that controlling for other relevant factors, including actual growth, the entrepreneurs having higher growth expectations perform significantly better later on in terms of profitability. In addition, education has a strong modifying effect: the impact of high growth expectations on subsequent profit performance is stronger for entrepreneurs with lower level of education.

Internationalization of small and medium sized UK manufacturing enterprises:technology and knowledge transfer perspective

This dissertation examines internationalisation of small and medium sized enterprises. There has been a journey to achieve this. The research has started as an action research as Teaching Company Scheme Associate. This has been done in two research cycles, which investigated factors for successful internationalisation of a small and medium sized UK manufacturing enterprise. This has revealed that successful internationalisation requires good technology and knowledge transfer to the new operations. The action research is followed by a survey that has been conducted within UK manufacturing companies. The data collected was analysed under three models: entry mode selection, role of factory and level of internationalisation. The first two models explain two major aspects of internationalisation decision. The last is showing what makes successful internationalising small and medium sized companies. These models provided several important results. The small and medium sized enterprise internationalisation is harder to achieve because most of these organisations do not have experience in technology and knowledge transfer. The success of internationalisation depends on the success of the transfer. This is achieved through employee ownership of the new knowledge. There are many factors affecting this result such as the network relationships such as trust, control and commitment and cognitive distance between two organisations. The last is a product of the difference between prior knowledge and the required level of knowledge. The entry mode and role of factory are decided through these factors while the level of internationalisation can only be explained by absorptive capacity of the recipient organisation and the technology transfer ability of the host organisation.

Mean zonal flows generated by librations of a rotating spherical cavity

Longitudinal librations represent oscillations about the axis of a rotating axisymmetric fluid-filled cavity. An analytical theory is developed for the case of a spherical cavity in the limit when the libration frequency is small in comparison with the rotation rate, but large in comparison with the inverse of the spin-up time. It is shown that longitudinal librations create a steady zonal flow through the nonlinear advection in the Ekman layers. The theory can be applied to laboratory experiments as well as to solid planets and satellites with a liquid core. Copyright © Cambridge University Press 2010.

Decision support for lifecycle planning and risk management of small-scale biomass combined heat and power (bCHP) projects in the UK

Biomass is projected to account for approximately half of the new energy production required to achieve the 2020 primary energy target in the UK. Combined heat and power (CHP) bioenergy systems are not only a highly efficient method of energy conversion, at smaller-scales a significant proportion of the heat produced can be effectively utilised for hot water, space heating or industrial heating purposes. However, there are many barriers to project development and this has greatly inhibited deployment in the UK. Project viability is highly subjective to changes in policy, regulation, the finance market and the low cost incumbent; a high carbon centralised energy system. Unidentified or unmitigated barriers occurring during the project lifecycle may not only negatively impact on the project but could ultimately lead to project failure. The research develops a decision support system (DSS) for small-scale (500 kWe to 10 MWe) biomass combustion CHP project development and risk management in the early stages of a potential project’s lifecycle. By supporting developers in the early stages of project development with financial, scheduling and risk management analysis, the research aims to reduce the barriers identified and streamline decision-making. A fuzzy methodology is also applied throughout the developed DSS to support developers in handling the uncertain or approximate information often held at the early stages of the project lifecycle. The DSS is applied to a case study of a recently failed (2011) small-scale biomass CHP project to demonstrate its applicability and benefits. The application highlights that the proposed development within the case study was not viable. Moreover, further analysis of the possible barriers with the DSS confirmed that some possible modifications to be project could have improved this, such as a possible change of feedstock to a waste or residue, addressing the unnecessary land lease cost or by increasing heat utilisation onsite. This analysis is further supported by a practitioner evaluation survey that confirms the research contribution and objectives are achieved.