Concrete Materials Storage, Mixing and Delivery, November 2004

Proper storage practices are critical to protect materials from intermingling, contamination, or degradation, and to maintain consistent aggregate gradation throughout a project. Concrete Paving Workforce Reference no.1

De-hyping transmit diversity in modern MIMO cellular systems

A contemporary perspective on the tradeoff between transmit antenna diversity and spatial multi-plexing is provided. It is argued that, in the context of modern cellular systems and for the operating points of interest, transmission techniques that utilize all available spatial degrees of freedom for multiplexingoutperform techniques that explicitly sacrifice spatialmultiplexing for diversity. Reaching this conclusion, however, requires that the channel and some key system features be adequately modeled; failure to do so may bring about starkly different conclusions. As a specific example, this contrast is illustrated using the 3GPP Long-Term Evolution system design.

Regulated Materials Facility Revenue Bond Funds, Iowa State University of Science and Technology, Independent Auditor's Reports, Financial Statements, June 30, 2005

State University Audit Report

Metodologia del treball en neologia: criteris, materials i processos

L'Observatori de Neologia, dirigit per la Dra. M. Teresa Cabré, neix com a grup de recerca l'any 1988 a la Universitat de Barcelona i des de 1994 s'incorpora com a projecte a l'Institut Universitari de Lingüística Aplicada de la Universitat Pompeu Fabra. L'Observatori de Neologia analitza el fenomen de l'aparició de paraules noves o neologismes en l'ús, tant pel que fa al català com al castellà. Actualment compta amb una base de dades de més de 82.000 ocurrències per al català i de més de 60.000 ocurrències per al castellà procedents de textos escrits i orals de mitjans de comunicació.Aquest volum recull la metodologia establerta des de l’inici del projecte pels membres fundadors de l’Observatori de Neologia - tot i que revisada i actualitzada al llarg dels anys. Aquesta metodologia guia tots els treballs de detecció, selecció, tractament i emmagatzemament de les dades que es duen a terme a l’Observatori.

The endoplasmic reticulum: a sensor of cellular stress that modulates immune responses.

Many inflammatory and infectious diseases are characterized by the activation of signaling pathways steaming from the endoplasmic reticulum (ER). These pathways, primarily associated with loss of ER homeostasis, are emerging as key regulators of inflammation and infection. Recent advances shed light on the mechanisms linking ER-stress and immune responses.

Wear of two artificial tooth materials in vivo: a 12-month pilot study.

STATEMENT OF PROBLEM: Wear of methacrylate artificial teeth resulting in vertical loss is a problem for both dentists and patients. PURPOSE: The purpose of this study was to quantify wear of artificial teeth in vivo and to relate it to subject and tooth variables. MATERIAL AND METHODS: Twenty-eight subjects treated with complete dentures received 2 artificial tooth materials (polymethyl methacrylate (PMMA)/double-cross linked PMMA fillers; 35%/59% (SR Antaris DCL, SR Postaris DCL); experimental 48%/46%). At baseline and after 12 months, impressions of the dentures were poured with improved stone. After laser scanning, the casts were superimposed and matched. Maximal vertical loss (mm) and volumetric loss (mm(3)) were calculated for each tooth and log-transformed to reduce variability. Volumetric loss was related to the occlusally active surface area. Linear mixed models were used to study the influence of the factors jaw, tooth, and material on adjusted (residual) wear values (alpha=.05). RESULTS: Due to drop outs (n=5) and unmatchable casts (n=3), 69% of all teeth were analyzed. Volumetric loss had a strong linear relationship to surface area (P<.001); this was less pronounced for vertical loss (P=.004). The factor showing the highest influence was the subject. Wear was tooth dependent (increasing from incisors to molars). However, these differences diminished once the wear rates were adjusted for occlusal area, and only a few remained significant (anterior versus posterior maxillary teeth). Another influencing factor was the age of the subject. CONCLUSIONS: Clinical wear of artificial teeth is higher than previously measured or expected. The presented method of analyzing wear of artificial teeth using a laser-scanning device seemed suitable.

The TPTE gene family: cellular expression, subcellular localization and alternative splicing.

The human TPTE (Transmembrane Phosphatase with TEnsin homology) gene family encodes a PTEN-related tyrosine phosphatase with four potential transmembrane domains. Chromosomal mapping revealed multiple copies of the TPTE gene on chromosomes 13, 15, 21, 22 and Y. Human chromosomes 13 and 21 copies encode two functional proteins, TPIP (TPTE and PTEN homologous Inositol lipid Phosphatase) and TPTE, respectively, whereas only one copy of the gene exists in the mouse genome. In the present study, we show that TPTE and TPIP proteins are expressed in secondary spermatocytes and/or prespermatids. In addition, we report the existence of several novel alternatively spliced isoforms of these two proteins with variable number of transmembrane domains. The latter has no influence on the subcellular localization of these different peptides as shown by co-immunofluorescence experiments. Finally, we identify another expressed TPTE copy, mapping to human chromosome 22, whose transcription appears to be under the control of the LTR of human endogenous retrovirus RTVL-H3.

Analysis of LEDGF/p75 expression regulation

Background To replicate, retroviruses must insert DNA copies of their RNA genomes into the host genome. This integration process is catalyzed by the viral integrase protein. The site of viral integration has been shown to be non-random and retrovirus-specific. LEDGF/p75, a splice variant encoded by PSIP1 gene and described as a general transcription coactivator, was identified as a tethering factor binding both to chromatin and to lentiviral integrases, thereby affecting integration efficiency as well as integration site selection. LEDGF/p75 is still a poorly characterized protein, and its cellular endogenous function has yet to be fully determined. In order to start unveiling the roles of LEDGF/p75 in the cell, we started to investigate the mechanisms involved in the regulation of LEDGF/p75. Materials and methods To identify PSIP1 minimal promoter and associated regulatory elements, we cloned a region starting 5 kb upstream the transcription start site (TSS, +1 reference position) to the ATG start codon (+816), as well as systematic truncations, in a plasmid containing the firefly luciferase reporter gene. These constructs were co-transfected into HEK293 cells with a plasmid encoding the Renilla luciferase under the pTK promoter as an internal control for transfection efficiency. Both luciferase activities were assessed by luminescence as an indicator of promoter activity. Results Luciferase assays identified regions -76 to +1 and +1 to +94 as two independent minimal promoters showing respectively a 3.7x and 2.3x increase in luciferase activity. These two independent minimal promoters worked synergistically increasing luciferase activity up to 16.3x as compared to background. Moreover, we identified five regulatory blocks which modulated luciferase activity depending on the DNA region tested, three enhancers (- 2007 to -1159, -284 to -171 and +94 to +644) and two silencers (-171 to -76 and +796 to +816). However, the silencing effect of the region -171 to -76 is dependent on the presence of the +94 to +644 region, ruling out the enhancer activity of the latter. Computational analysis of PSIP1 promoter revealed the absence of TATA box and initiator (INR) sequences, classifying this promoter as nonconventional. TATA-less and INR-less promoters are characterized by multiple Sp1 binding sites, involved in the recruitment of the RNA pol II complex. Consistent with this, PSIP1 promoter contains multiple putative Sp1 binding sequences in regions -76 to +1 and +1 to +94.

Towards robust network based complex systems : from evolutionary cellular automata to biological models

Abstract Sitting between your past and your future doesn't mean you are in the present. Dakota Skye Complex systems science is an interdisciplinary field grouping under the same umbrella dynamical phenomena from social, natural or mathematical sciences. The emergence of a higher order organization or behavior, transcending that expected of the linear addition of the parts, is a key factor shared by all these systems. Most complex systems can be modeled as networks that represent the interactions amongst the system's components. In addition to the actual nature of the part's interactions, the intrinsic topological structure of underlying network is believed to play a crucial role in the remarkable emergent behaviors exhibited by the systems. Moreover, the topology is also a key a factor to explain the extraordinary flexibility and resilience to perturbations when applied to transmission and diffusion phenomena. In this work, we study the effect of different network structures on the performance and on the fault tolerance of systems in two different contexts. In the first part, we study cellular automata, which are a simple paradigm for distributed computation. Cellular automata are made of basic Boolean computational units, the cells; relying on simple rules and information from- the surrounding cells to perform a global task. The limited visibility of the cells can be modeled as a network, where interactions amongst cells are governed by an underlying structure, usually a regular one. In order to increase the performance of cellular automata, we chose to change its topology. We applied computational principles inspired by Darwinian evolution, called evolutionary algorithms, to alter the system's topological structure starting from either a regular or a random one. The outcome is remarkable, as the resulting topologies find themselves sharing properties of both regular and random network, and display similitudes Watts-Strogtz's small-world network found in social systems. Moreover, the performance and tolerance to probabilistic faults of our small-world like cellular automata surpasses that of regular ones. In the second part, we use the context of biological genetic regulatory networks and, in particular, Kauffman's random Boolean networks model. In some ways, this model is close to cellular automata, although is not expected to perform any task. Instead, it simulates the time-evolution of genetic regulation within living organisms under strict conditions. The original model, though very attractive by it's simplicity, suffered from important shortcomings unveiled by the recent advances in genetics and biology. We propose to use these new discoveries to improve the original model. Firstly, we have used artificial topologies believed to be closer to that of gene regulatory networks. We have also studied actual biological organisms, and used parts of their genetic regulatory networks in our models. Secondly, we have addressed the improbable full synchronicity of the event taking place on. Boolean networks and proposed a more biologically plausible cascading scheme. Finally, we tackled the actual Boolean functions of the model, i.e. the specifics of how genes activate according to the activity of upstream genes, and presented a new update function that takes into account the actual promoting and repressing effects of one gene on another. Our improved models demonstrate the expected, biologically sound, behavior of previous GRN model, yet with superior resistance to perturbations. We believe they are one step closer to the biological reality.

Materials and Mix Optimization Procedures for PCC Pavements, March 2006

Severe environmental conditions, coupled with the routine use of deicing chemicals and increasing traffic volume, tend to place extreme demands on portland cement concrete (PCC) pavements. In most instances, engineers have been able to specify and build PCC pavements that met these challenges. However, there have also been reports of premature deterioration that could not be specifically attributed to a single cause. Modern concrete mixtures have evolved to become very complex chemical systems. The complexity can be attributed to both the number of ingredients used in any given mixture and the various types and sources of the ingredients supplied to any given project. Local environmental conditions can also influence the outcome of paving projects. This research project investigated important variables that impact the homogeneity and rheology of concrete mixtures. The project consisted of a field study and a laboratory study. The field study collected information from six different projects in Iowa. The information that was collected during the field study documented cementitious material properties, plastic concrete properties, and hardened concrete properties. The laboratory study was used to develop baseline mixture variability information for the field study. It also investigated plastic concrete properties using various new devices to evaluate rheology and mixing efficiency. In addition, the lab study evaluated a strategy for the optimization of mortar and concrete mixtures containing supplementary cementitious materials. The results of the field studies indicated that the quality management concrete (QMC) mixtures being placed in the state generally exhibited good uniformity and good to excellent workability. Hardened concrete properties (compressive strength and hardened air content) were also satisfactory. The uniformity of the raw cementitious materials that were used on the projects could not be monitored as closely as was desired by the investigators; however, the information that was gathered indicated that the bulk chemical composition of most materials streams was reasonably uniform. Specific minerals phases in the cementitious materials were less uniform than the bulk chemical composition. The results of the laboratory study indicated that ternary mixtures show significant promise for improving the performance of concrete mixtures. The lab study also verified the results from prior projects that have indicated that bassanite is typically the major sulfate phase that is present in Iowa cements. This causes the cements to exhibit premature stiffening problems (false set) in laboratory testing. Fly ash helps to reduce the impact of premature stiffening because it behaves like a low-range water reducer in most instances. The premature stiffening problem can also be alleviated by increasing the water–cement ratio of the mixture and providing a remix cycle for the mixture.

Regulated Materials Facility Revenue Bond Funds, Iowa State University of Science and Technology, Independent Auditor's Report, Basic Financial Statement and Supplementary Information, June 30, 2006

State University Audit Report

A tumor-specific cellular environment at the brain invasion border of adamantinomatous craniopharyngiomas.

Craniopharyngiomas (CP) are benign epithelial tumors of the sellar region and can be clinicopathologically distinguished into adamantinomatous (adaCP) and papillary (papCP) variants. Both subtypes are classified according to the World Health Organization grade I, but their irregular digitate brain infiltration makes any complete surgical resection difficult to obtain. Herein, we characterized the cellular interface between the tumor and the surrounding brain tissue in 48 CP (41 adaCP and seven papCP) compared to non-neuroepithelial tumors, i.e., 12 cavernous hemangiomas, 10 meningiomas, and 14 metastases using antibodies directed against glial fibrillary acid protein (GFAP), vimentin, nestin, microtubule-associated protein 2 (MAP2) splice variants, and tenascin-C. We identified a specific cell population characterized by the coexpression of nestin, MAP2, and GFAP within the invasion niche of the adamantinomatous subtype. This was especially prominent along the finger-like protrusions. A similar population of presumably astroglial precursors was not visible in other lesions under study, which characterize them as distinct histopathological feature of adaCP. Furthermore, the outer tumor cell layer of adaCP showed a distinct expression of MAP2, a novel finding helpful in the differential diagnosis of epithelial tumors in the sellar region. Our data support the hypothesis that adaCP, unlike other non-neuroepithelial tumors of the central nervous system, create a tumor-specific cellular environment at the tumor-brain junction. Whether this facilitates the characteristic infiltrative growth pattern or is the consequence of an activated Wnt signaling pathway, detectable in 90% of these tumors, will need further consideration.

Modulation of the airway allergic response : characterization of the cellular and molecular mechanisms

ABSTRACT Allergic asthma is a major complication of atopy. Its severity correlates with the presence of activated T lymphocytes and eosinophils in the bronchoalveolar lavage fluid (BALF). Mechanisms that protect against asthma are poorly understood. Based on oral models of mucosal tolerance induction, models using the nasal route showed that uptake of important amounts of antigen can induce tolerance and reverse the allergic phenotype. 1L-10 producing regulatory T cells were proposed as key players in tolerance induction, but other players, e.g. dendritic cells (DC), B cells and epithelial cells may have to be taken into consideration. The objective of the present study is to characterize the effects of a therapeutic intranasal treatment (INT) in a murine model of asthma and to determine, in this model, the cellular and molecular mechanisms leading to protection against asthma. First, we established an asthma model by sensitizing the BALB/c mouse to ovalbumin (OVA) by two intraperitoneal injections of alum-adsorbed OVA and three inhalations of aerosolized OVA. Then OVA was applied to the nasal mucosa of OVA- sensitized mice. Mice were later re-exposed to OVA aerosols to assess the protection induced by OVA INT. OVA sensitization induced strong eosinophil recruitment, OVA-specific T cell proliferation and IgE production. Three intranasal treatments at 24-hour intervals with 1.5 mg OVA drastically reduced inflammatory cell recruitment into the BALF and inhibited OVA-specific IgE production upon allergen re-exposure. T cell proliferation in ex vivo bronchial lymph node (BLN) cells was inhibited, as well as TH2 cytokine production. Protection against OVA-induced bronchial inflammation was effective for an extended period of time and treated mice resisted a second re-exposure. Transfer of CD4+ cells from BLN and lungs of OVA-treated mice protected asthmatic recipient mice from subsequent aerosol challenge indicating an involvement of CD4+ T regulatory cells in this protection. RESUME L'asthme allergique est une manifestation clinique majeure de l'atopie. La sévérité de l'asthme est liée à la présence de lymphocytes T activés ainsi que d'éosinophiles dans le lavage broncho-alvéolaire (LBA). Les mécanismes permettant de se prémunir contre l'asthme sont mal connus. Basés sur des modèles muqueux d'induction de tolérance par la voie orale, des modèles utilisant la voie nasale ont montré que d'importantes quantités d'antigène peuvent induire une tolérance et ainsi reverser le phénotype allergique. Des cellules régulatrices produisant de l'IL-10 pourraient jouer un rôle clé dans l'induction de la tolérance mais d'autres acteurs tels que les cellules dendritiques, les cellules B et les cellules épithéliales doivent aussi être prises en compte. L'objectif de la présente étude est de caractériser les effets d'un traitement intranasal thérapeutique dans un modèle murin d'asthme et de déterminer dans ce modèle les mécanismes cellulaires et moléculaires conférant une protection contre l'asthme. En premier lieu, un modèle d'asthme allergique a été établi en sensibilisant des souris BALB/c à l'ovalbumine (OVA) par deux injections intraperitonéales d'OVA adsorbé sur de l'alum et trois séances d'OVA en aérosol. Dans un second temps, de l'OVA a été administrée sur la muqueuse nasale des souris sensibilisées à l'OVA. Les souris furent ensuite challengées par des aérosols d'OVA afin d'évaluer la protection conférée par le traitement intranasal à l'OVA. La sensibilisation à l'OVA a induit un fort recrutement d'éosinophiles, une réponse proliférative des cellules T à l'OVA ainsi qu'une production d'lgE spécifiques. Trois traitements intranasaux à 24 heures d'intervalle avec 1.5 mg d'OVA ont permis de réduire drastiquement le recrutement des cellules inflammatoires dans le LBA ainsi que d'inhiber la production d'lgE spécifiques à l'OVA produits lors d'une ré-exposition à l'OVA. La prolifération en réponse à l'OVA de cellules extraites ex vivo de ganglions bronchiques a, elle aussi, été inhibée de même que la production de cytokines TH2. La protection contre l'inflammation provoquée par l'aérosol est efficace pour une longue période et les souris traitées résistent à une seconde ré- exposition. Le transfert de cellules CD4+ issues de ganglions bronchiques et de poumons de souris traitées à l'OVA protège les souris asthmatiques receveuses contre les effets inflammatoires d'un aérosol, indiquant que des cellules T CD4+ régulatrices pourraient être impliquées dans cette protection. RESUME DESTINE A UN LARGE PUBLIC L'asthme est une affection des voies respiratoires qui se caractérise par une contraction de la musculature des voies aériennes, une production de mucus et d'anticorps de l'allergie (IgE). On parle d'asthme allergique lorsque les facteurs déclenchant l'asthme sont des allergènes inhalés tels que acariens, pollens ou poils d'animaux. Le système immunitaire des patients asthmatiques a un défaut de programmation qui le rend réactif à des substances qui sont normalement inoffensives. Le traitement actuel de l'asthme repose sur le soulagement des symptômes grâce à des produits à base de stéroïdes. Les techniques permettant de reprogrammer le système immunitaire (immunothérapie) ne sont pas efficaces pour tous les antigènes et prennent beaucoup de temps. En conséquence, il est nécessaire de mieux comprendre les mécanismes sous-tendant une telle reprogrammation afin d'en améliorer le rendement et l'efficacité. Dans ce but, des modèles d'immunothérapie ont été mis au point chez la souris. Ils permettent une plus grande liberté d'investigation. Dans cette étude, un modèle d'asthme allergique dans la souris a été établi par une sensibilisation à un antigène particulier : l'ovalbumine (OVA). Ce modèle présente les caractéristiques principales de l'asthme humain : recrutement de cellules inflammatoires dans les poumons, augmentation de la production d'anticorps et de la résistance des bronches aux flux respiratoires. Cette souris asthmatique a ensuite été traitée par application nasale d'OVA. Comparées aux souris non traitées, les souris traitées à l'OVA ont moins de cellules inflammatoires dans leurs poumons et produisent moins d'anticorps IgE. D'autres marqueurs inflammatoires sont aussi fortement diminués. Des cellules de poumons ou de ganglions bronchiques prélevées sur des souris traitées injectées dans des souris asthmatiques améliorent les symptômes de l'asthme. Ces cellules pourraient donc avoir un rôle régulateur dans l'asthme. Les caractériser et les étudier afin d'être capable de les générer est crucial pour les futures thérapies de l'asthme.

Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load.

OBJECTIVES: (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. METHODS: Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturer's instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. RESULTS: There was a significant interaction between material and load as well as between load and brushing time (p<0.0001). The microhybrid and hybrid materials demonstrated more surface deterioration with higher loads, whereas with the microfilled resins Heliomolar and Adoro it was vice versa. For ceramic materials, no or little deterioration was observed over time and independent of the load. The ceramic materials and 3 of the composite materials (roughness) showed no further deterioration after 5h of toothbrushing. Mean surface gloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. SIGNIFICANCE: The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be quickly assessed by measuring surface gloss. For this purpose, a brushing time of 10h (=72,000 strokes) is needed. In further comparative studies, specimens of different materials should be tested in one series to estimate the true variability.

Integrated Materials and Construction Practice for Concrete Pavement: A State-of-the-Practice Manual, 2006

At the heart of all concrete pavement projects is the concrete itself. This manual is intended as both a training tool and a reference to help concrete paving engineers, quality control personnel, specifiers, contractors, suppliers, technicians, and tradespeople bridge the gap between recent research and practice regarding optimizing the performance of concrete for pavements. Specifically, it will help readers do the following: