Relationship between biomarkers of cartilage in serum and degenerative joint disease in lusitanian horses

Cartilage degradation biomarkers are a potential tool for early diagnosis of degen- erative joint disease (DJD). In young horses, Coll2-1 and Coll2-1NO2 have been studied in serum and reported to be useful in the assessment of joint disease. Fib3-2 has been described to be higher in serum of humans with osteoarthritis but has not been assessed in horses. The aim of the current study was to evaluate biomarkers’ changes with age, sex, and exercise and correlate them with DJD. Blood collection and radiographic examination were performed in 51 Lusitanian horses. Moreover, inertial sensor-based detection of lameness was used to assess pain together with sub- jective examination. Females presented significantly higher concentrations of Coll2- 1 (P5.015) and Coll2-1NO2 (P5.014) compared to males. We found significant influence of high level of work in lower concentration of Coll2-1 (P5.001) and sig- nificant influence of sex in concentration of Coll2-1NO2 (P5.030). There was no influence of sex, age and work on Fib3-2. All biomarkers were increased in the DJD group (n535) compared to healthy controls (n516). This difference was significant for Coll2-1 (P5.015). When sorted by sex and age groups, significant difference in Coll2-1 between disease and healthy controls disappeared in old horses and females. Coll2-1 is a good marker of cartilage degradation in horses with DJD, being more specific in young horses and males. Fib3-2 may be further explored to help identify disease in particular cases.

TARDI VARISCAN DEFORMATION IN THE IBERIAN PENINSULA; A LATE FEATURE IN THE LAURASIA-GONDWANA DEXTRAL COLLISION

The Late Variscan deformation event in Iberia, is characterized by an intraplate deformation regime induced by the oblique collision between Laurentia and Gondwan. This episode in Iberia is characterized by NNE-SSW strike-slip faults, which are considered by the classic works as sinistral strike-slips. However, the absence of Mesozoic formations constraining the age of this sinistral kinematics, led some authors to consider it as the result of Alpine reworking. Structural studies in Almograve and Ponta Ruiva sectors (SW Portugal), not only shows that NNE-SSW faults presents a clear sinistral kinematics and are occasionally associated with E-W dextral shears, but also that this kinematics is related to the late deformation episodes of Variscan Orogeny. In Almograve sector, the late Variscan structures are characterized by NNE-SSW sinistral kink-bands, spatially associated with E-W dextral faults. These structures are contemporaneous and affect the previously deformed Carboniferous units. The Ponta Ruiva Sector constrains the age of deformation because the E-W dextral shears affect the Late Carboniferous (late Moscovian) units, but not the overlying Triassic series. The new exposed data shows that the NNE-SSW and the E-W faults are dynamically associated and results from the same deformation event. The NNE-SSW sinistral faults could be considered as second order dominoes structures related with first order E-W dextral shears, related with Laurasia-Gondwana collision during Late Carboniferous-Permian Times.

Relationship between biomarkers of cartilage in serum and degenerative joint disease in Lusitano horses

Introduction: Cartilage degradation biomarkers are a potential tool for early diagnosis of degenerative joint disease (DJD). In young horses, Coll2-1 and Coll2-1NO2 have been studied in serum and reported to be useful in the assessment of joint disease. Fib3-2 has been described to be higher in serum of humans with osteoarthritis but was never assessed in horses. The aim of the current study was to evaluate biomarkers’ changes with age, sex and exercise and correlate them with DJD. Material and Methods: Blood collection and radiographic examination were performed in 51 Lusitanian horses. Moreover, inertial sensor-based detection of lameness was used to assess pain together with subjective examination. Results: Females presented significantly higher concentrations of Coll2-1 (p = 0.015) and Coll2-1NO2 (p = 0.014) compared to males. We have found significant influence of high level of work in lower concentration of Coll2-1 (p = 0.001) and significant influence of sex in concentration of Coll2-1NO2 (p = 0.030). There was no influence of sex, age and work on Fib3-2. All biomarkers were increased in the DJD group (n= 35) compared to healthy controls (n = 16). This difference was significant for Coll2-1 (p = 0.015). When sorted by sex and age groups, significant difference in Coll2-1 between disease and healthy controls disappeared in old horses and females. Discussion/ Conclusion: Coll2-1 is a good marker of cartilage degradation in horses with DJD, being more specific in young horses and males. Fib3-2 may be further explored to help identify disease in particular cases.

Isogeometric analysis of large-deformation thin shells using RHT-splines for multiple-patch coupling

We present an isogeometric thin shell formulation for multi-patches based on rational splines over hierarchical T-meshes (RHT-splines). Nitsche’s method is employed to efficiently couple the patches. The RHT-splines have the advantages of allowing a computationally feasible local refine- ment, are free from linear independence, possess high order continuity and satisfy the partition of unity and non-negativity, properties. In addition, C 1 continuity of the RHT-splines obviates to use of rotational degrees of freedom. The good performance of the present method is demonstrated by a number of numerical examples.

Early-stage deformation localisation in thrust systems: new perspectives from carbonates in the Italian Southern Alps and Oman Mountains

This thesis investigates mechanisms and boundary conditions that steer the early localisation of deformation and strain in carbonate multilayers involved in thrust systems, under shallow and mid-crustal conditions. Much is already understood about deformation localisation, but some key points remain loosely constrained. They encompass i) the understanding of which structural domains can preserve evidence of early stages of tectonic shortening, ii) the recognition of which mechanisms assist deformation during these stages and iii) the identification of parameters that actually steer the beginning of localisation. To clarify these points, the thesis presents the results of an integrated, multiscale and multi-technique structural study that relied on field and laboratory data to analyse the structural, architectural, mineralogical and geochemical features that govern deformation during compressional tectonics. By focusing on two case studies, the Eastern Southern Alps (northern Italy), where deformation is mainly brittle, and the Oman Mountains (northeastern Oman), where ductile deformation dominates, the thesis shows that the deformation localisation is steered by several mechanisms that mutually interact at different stages during compression. At shallow crustal conditions, derived conceptual and numerical models show that both inherited (e.g., stratigraphic) and acquired (e.g., structural) features play a key role in steering deformation and differentiating the seismic behaviour of the multilayer succession. At the same time, at deeper crustal conditions, strain localises in narrow domains in which fluids, temperature, shear strain and pressure act together during the development of the internal fabric and the chemical composition of mylonitic shear zones, in which localisation took place under high-pressure (HP) and low-temperature (LT) conditions. In particular, results indicate that those shear zones acted as “sheltering structural capsules” in which peculiar processes can happen and where the results of these processes can be successively preserved even over hundreds of millions of years.

Monitoring time-dependent deformation patterns through geodetic techniques

In this thesis we focus on the analysis and interpretation of time dependent deformations recorded through different geodetic methods. Firstly, we apply a variational Bayesian Independent Component Analysis (vbICA) technique to GPS daily displacement solutions, to separate the postseismic deformation that followed the mainshocks of the 2016-2017 Central Italy seismic sequence from the other, hydrological, deformation sources. By interpreting the signal associated with the postseismic relaxation, we model an afterslip distribution on the faults involved by the mainshocks consistent with the co-seismic models available in literature. We find evidences of aseismic slip on the Paganica fault, responsible for the Mw 6.1 2009 L’Aquila earthquake, highlighting the importance of aseismic slip and static stress transfer to properly model the recurrence of earthquakes on nearby fault segments. We infer a possible viscoelastic relaxation of the lower crust as a contributing mechanism to the postseismic displacements. We highlight the importance of a proper separation of the hydrological signals for an accurate assessment of the tectonic processes, especially in cases of mm-scale deformations. Contextually, we provide a physical explanation to the ICs associated with the observed hydrological processes. In the second part of the thesis, we focus on strain data from Gladwin Tensor Strainmeters, working on the instruments deployed in Taiwan. We develop a novel approach, completely data driven, to calibrate these strainmeters. We carry out a joint analysis of geodetic (strainmeters, GPS and GRACE products) and hydrological (rain gauges and piezometers) data sets, to characterize the hydrological signals in Southern Taiwan. Lastly, we apply the calibration approach here proposed to the strainmeters recently installed in Central Italy. We provide, as an example, the detection of a storm that hit the Umbria-Marche regions (Italy), demonstrating the potential of strainmeters in following the dynamics of deformation processes with limited spatio-temporal signature

A Trans-dimensional inversion algorithm to model deformation sources with unconstrained shape in finite element domains

Ground deformation provides valuable insights on subsurface processes with pattens reflecting the characteristics of the source at depth. In active volcanic sites displacements can be observed in unrest phases; therefore, a correct interpretation is essential to assess the hazard potential. Inverse modeling is employed to obtain quantitative estimates of parameters describing the source. However, despite the robustness of the available approaches, a realistic imaging of these reservoirs is still challenging. While analytical models return quick but simplistic results, assuming an isotropic and elastic crust, more sophisticated numerical models, accounting for the effects of topographic loads, crust inelasticity and structural discontinuities, require much higher computational effort and information about the crust rheology may be challenging to infer. All these approaches are based on a-priori source shape constraints, influencing the solution reliability. In this thesis, we present a new approach aimed at overcoming the aforementioned limitations, modeling sources free of a-priori shape constraints with the advantages of FEM simulations, but with a cost-efficient procedure. The source is represented as an assembly of elementary units, consisting in cubic elements of a regular FE mesh loaded with a unitary stress tensors. The surface response due to each of the six stress tensor components is computed and linearly combined to obtain the total displacement field. In this way, the source can assume potentially any shape. Our tests prove the equivalence of the deformation fields due to our assembly and that of corresponding cavities with uniform boundary pressure. Our ability to simulate pressurized cavities in a continuum domain permits to pre-compute surface responses, avoiding remeshing. A Bayesian trans-dimensional inversion algorithm implementing this strategy is developed. 3D Voronoi cells are used to sample the model domain, selecting the elementary units contributing to the source solution and those remaining inactive as part of the crust.

Submesoscale features in regions with different baroclinic deformation radius

In questo studio, un modello nidificato "child" ad alta risoluzione (risoluzione 1/48°) è ottenuto attraverso la piattaforma SURF. Il modello "child" è ottenuto tramite "downscaling" dei campi medi giornalieri dal modello globale "parent" (1/12°). Questo permette di osservare le caratteristiche della sottomesoscala in due regioni dell'oceano Atlantico settentrionale, Azzorre e Bermuda, dal 4 al 12 gennaio 2021. Questa tesi si propone di condurre un'analisi preliminare della relazione fra il raggio di deformazione baroclino e l'esordio dell'attività di sottomesoscala, nelle regioni di interesse. A questo scopo, vengono effettuati molti confronti fra i campi risultanti dal "parent" e dal "child". In particolare, ci concentriamo sulla Mixed-Layer Instability (MLI) studiata attraverso variabili come la Mixed-Layer Depth (MLD), la vorticità relativa, le velocità orizzontali e verticali, l'energia cinetica e la frequenza di Brunt-Vaisala. Dai risultati, mentre il modello "parent" sembra inadeguato, quello "child" è in grado di rilevare la MLI e la presenza di filamenti e scie topografiche in entrambe le regioni, riproducendo meglio le correnti orizzontali e verticali alla sottomesoscala. Ciò fornisce una connessione tra mesoscala e sottomesoscala: mentre nelle Azzorre la MLI sembra svolgere un ruolo chiave nella ristratificazione della colonna d'acqua, lo stesso non sembra nelle Bermuda dove i vortici di mesoscala sono più ampi, influendo maggiormente sulla stratificazione verticale. Qui, i processi di ristratificazione sembrerebbero correlati alle mesoscale piuttosto che alle sottomesoscale. La MLI giocherebbe comunque un ruolo nella generazione di correnti alla sottomesoscala, insieme ad altri processi come la frontogenesi e le scie topografiche. In conclusione, il valore del raggio di deformazione baroclino non sembra influenzare l'attivazione dei processi di sottomesoscala, mentre sembrerebbe determinare l'importanza della MLI nel processo di ristratificazione.

The Crosslinking Degree Controls The Mechanical, Rheological, And Swelling Properties Of Hyaluronic Acid Microparticles.

Viscosupplements, used for treating joint and cartilage diseases, restore the rheological properties of synovial fluid, regulate joint homeostasis and act as scaffolds for cell growth and tissue regeneration. Most viscosupplements are hydrogels composed of hyaluronic acid (HA) microparticles suspended in fluid HA. These microparticles are crosslinked with chemicals to assure their stability against enzyme degradation and to prolong the action of the viscosupplement. However, the crosslinking also modifies the mechanical, swelling and rheological properties of the HA microparticle hydrogels, with consequences on the effectiveness of the application. The aim of this study is to correlate the crosslinking degree (CD) with these properties to achieve modulation of HA/DVS microparticles through CD control. Because divinyl sulfone (DVS) is the usual crosslinker of HA in viscosupplements, we examined the effects of CD by preparing HA microparticles at 1:1, 2:1, 3:1, and 5:1 HA/DVS mass ratios. The CD was calculated from inductively coupled plasma spectrometry data. HA microparticles were previously sized to a mean diameter of 87.5 µm. Higher CD increased the viscoelasticity and the extrusion force and reduced the swelling of the HA microparticle hydrogels, which also showed Newtonian pseudoplastic behavior and were classified as covalent weak. The hydrogels were not cytotoxic to fibroblasts according to an MTT (3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide) assay. © 2014 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2014.

The Influence Of Altered Occlusion On Pro-inflammatory Cytokine Levels In The Tmj Synovial Tissues Of Rats.

The aim of this study was to evaluate whether altered occlusion affects both the condylar cartilage thickness and the cytokine levels of the TMJs of rats. Thirty adult-male rats (n=30) were randomly assigned to three experimental conditions: a control group that underwent sham operations with unaltered occlusion; an FPDM group that underwent functional posterior displacement of the mandible that was induced by an incisor guiding appliance; and an iOVD group in which the increased occlusal vertical dimension was induced in the molars. The rats were subjected to the FPDM or iOVD model for 14 days and then killed. Both the right and left TMJs were removed and randomly assigned to examination with staining or immunoassay techniques. Toluidine blue staining was used to measure the thicknesses of the four layers of the articular cartilage (i.e., the fibrous, proliferating, mature, and hypertrophic layers). ELISA assays were used to assess the concentrations of the pro-inflammatory cytokines IL-1α, IL-1β, IL-6, and tumour necrosis factor (TNF-α). The measurements of the articular cartilage layers and cytokine concentrations were analyzed with ANOVA and Tukey's tests and Kruskal-Wallis and Dunn tests, respectively (α=5%). The thickness of articular cartilage in the FPDM group (0.3±0.03mm) was significantly greater than those of the control (0.2±0.01mm) and iOVD (0.25±0.03mm) groups. No significant difference was observed between the control and iOVD groups. The four articular cartilage layers were thicker in the FPDM group than in the control and iOVD groups, and the latter two groups did not differ one from each other. Both the FPDM and iOVD groups exhibited higher cytokine levels than did the control (p<0.05) group. Compared to the FPDM group, the iOVD group exhibited significantly higher levels of IL-1β and TNF-α. Both models induced inflammation in the TMJ and caused significant structural changes in the TMJ and surrounding tissues.

Obesity Versus Osteoarthritis: Beyond The Mechanical Overload.

Obesity is currently considered a major public health problem in the world, already reaching epidemic characteristics, according to the World Health Organization. Excess weight is the major risk factor associated with various diseases, such as type 2 diabetes mellitus, hypertension, dyslipidemia and osteometabolic diseases, including osteoporosis and osteoarthritis. Osteoarthritis is the most prevalent rheumatic disease and the leading cause of physical disability and reduced quality of life of the population over 65 years. It mainly involves the joints that bear weight - knees and hips. However, along with the cases of obesity, its prevalence is increasing, and even in other joints, such as hands. Thus, it is assumed that the influence of obesity on the development of OA is beyond mechanical overload. The purpose of this review was to correlate the possible mechanisms underlying the genesis and development of these two diseases. Increased fat mass is directly proportional to excessive consumption of saturated fatty acids, responsible for systemic low-grade inflammation condition and insulin and leptin resistance. At high levels, leptin assumes inflammatory characteristics and acts in the articular cartilage, triggering the inflammatory process and changing homeostasis this tissue with consequent degeneration. We conclude that obesity is a risk factor for osteoarthritis and that physical activity and changes in diet composition can reverse the inflammatory and leptin resistance, reducing progression or preventing the onset of osteoarthritis.

Resistência mecânica de hidrogéis termo-sensíveis constituídos de Alginato-Ca2+ / PNIPAAm, tipo Semi-IPN

Thermosensitive hydrogels were synthesized using alginate-Ca2+ in association with a thermosensitive polymer, such as PNIPAAm. The mechanical properties of the hydrogels were determined measuring the maximum tension of deformation. With the increase of the temperature by 25 to 40 ºC above the LCST the chains of PNIPAAm collapsed, dragging the alginate net and diminishing the size of the pores. The decrease in the size of the pores of the hydrogel was followed by an increase in the mechanicals resistance of the material.

Avaliação de índices de firmeza para abacaxi minimamente processado em fatias tratadas com soluções de sais de cálcio

Fresh-cut sliced fruits and vegetables are ready to eat immediately and their sensorial characteristics should be similar to fresh product. Although most of the studies in this area are focused on vegetables, there is a great market potential for fresh-cut sliced fruits, mainly for those which exhibit some commercialization or preparation difficulties such as pineapple. The objective of this work was to evaluate the effect of 1% and 3% concentrations of calcium salts (chloride, sulphate and lactate) on pH, total soluble solids and firmness values of minimally processed pineapple slices. Two types of indenters and three firmness indexes were investigated aiming to identify the best index. Results showed that calcium sulphate 3% kept average firmness index up to 44.45% higher than the index value of the control. Even though both indenters exhibited similar variability the cylindrical one was able to point out more differences between control and treatments than the cylindrical borer indenter.

Proposição e avaliação de um método baseado em projeção de luz para reconstrução e análise da superfície do tronco durante a respiração

Universidade Estadual de Campinas . Faculdade de Educação Física

Saude fisica, indicadores antropometricos, desempenho fisico e bem-estar subjetivo em idosos atendidos no ambulatorio de geriatria do HC/UNICAMP

Universidade Estadual de Campinas . Faculdade de Educação Física