NON-FULL-TIME COLLEGE PROFESSORS: A NARRATIVE INQUIRY INTO THE NON-FULL-TIME FACULTY ROLE

The rate of non-full-time faculty members has increased rapidly over the last decade (Louis, 2009; MacKay, 2014; Meranze & Newfield, 2013), as the post-secondary landscape of fluctuating enrolment, fiscal and operational challenges, and the requirement to hire specialized skill sets have required institutions to rely heavily on this demographic. In the Ontario Colleges of Applied Arts and Technology (CAATs) system, institutions have tried to preserve and enhance educational quality with fewer resources through greater reliance on non-full-time faculty. The purpose of this study was to explore the perceptions and experiences of teaching and support of non-full-time faculty at one Eastern Ontario college. Employing a narrative inquiry methodology, data were collected from four participants through their writing three individual letters at the end of each month and participating in one interview at the end of the contract period. The data were analyzed and coded. This analysis revealed five themes: motivation, connection and engagement, compensation, teaching and development, and performance evaluation. Differences in the participants’ perceptions tended to reflect divergences across career stage: retired versus early career. The compensation package provided to non-full-time faculty was considered inadequate for those in the early career stage, especially comparing it to that of full-time faculty. In addition, the amount of previous teaching experience was an important indicator for the appropriate level of teaching resources and support provided by the institution. The newer faculty members required a higher level of support to combat feelings of role isolation. The temporary nature of the role made it difficult to establish a feeling of a strong connection to the institution and subsequently opportunities to engage further to deepen the relationship. Despite these differences across participants, autonomous motivators were consistent across all narratives, as participants expressed their desire to teach and share their knowledge to help students achieve their goals. Participants concluded their narratives by sharing future advice for faculty interested in pursuing the role. The narratives provided areas for improvement that would help increase the level of job satisfaction for non-full-time college faculty members: (a) establishing a more thorough performance evaluation process to align with institutional supports, (b) offering more diverse teaching resources to better prepare faculty and enhance teaching practices, (c) overhauling the compensation package to better recognize the amount of time and effort spent in the role and aligning with the compensation provided to full-time faculty, and (d) including rewards and incentives as part of the compensation package to enhance the level of commitment and availability for the role. These changes might well increase the job satisfaction and improve the retention of non-full-time faculty members.

A case study on a design-informed developmental evaluation

Developmental evaluation (DE) is an evaluation approach that aims to support the development of an innovation (Patton, 1994, 2011). This aim is achieved through supporting clients’ information needs through evaluative inquiry as they work to develop and refine the innovation. While core concepts and principles are beginning to be articulated and refined, challenges remain as to how to focus a developmental evaluation beyond those knowledge frameworks most immediate to clients to support innovation development. Anchoring a DE in knowledge frameworks other than those of the clients might direct attention to issues not yet obvious to clients, but which might further the goal of supporting innovation development if attended to. Drawing concepts and practices from the field of design may be one avenue with which to inform developmental evaluation in achieving its aim. Through a case study methodology, this research seeks to understand the nuances of operationalizing the guiding principles of DE as well as to investigate the utility, feasibility, and consequences of integrating design concepts and practices into developmental evaluation (design-informed developmental evaluation, “DI-DE”). It does so by documenting the efforts of a design-informed developmental evaluator and a task force of educators and researchers in a Faculty of Education as they work to develop a graduate-level education program. A systematic review into those purposeful efforts made to introduce DI-DE thinking into task force deliberations, and an analysis into the responses and consequences of those efforts shed light on what it had meant to practice DI-DE. As a whole, this research on evaluation is intended to further contemporary thinking about the closely coupled relationship between program development and evaluation in complex and dynamic environments.

Understanding Online Abuse: An Analysis of Abuse Against Women Content Creators

This research is an examination into the ways online abuse functions in certain online spaces. By analyzing text-based online abuse against women who are content creators, this research maps how aspects of violence against women offline extends online. This research examines three different explorations into how online abuse against women functions. Chapter two considers what online abuse against women looks like on Twitter as a case study. This chapter contends that online abuse can be understood as an unintentional use of Twitter’s design. Chapter three focuses specifically on the textual descriptions of sexual violence women who are journalists receive online. Chapter four analyzes Gamergate, an online movement that specifically looks to organize online abuse towards women. Chapter five concludes by meditating on the need to look at a bigger picture that includes cultural shifts that dismantle the normalization of violence against women both on and offline.

Preparation of Polymer Nanoparticles by Ring Opening Metathesis Polymerization in Aqueous Dispersed Systems with Water-Soluble Ruthenium-based Catalyst

Ring opening metathesis polymerization (ROMP) is a variant of olefin metathesis used to polymerize strained cyclic olefins. Ruthenium-based Grubbs’ catalysts are widely used in ROMP to produce industrially important products. While highly efficient in organic solvents such as dichloromethane and toluene, these hydrophobic catalysts are not typically applied in aqueous systems. With the advancements in emulsion and miniemulsion polymerization, it is promising to conduct ROMP in an aqueous dispersed phase to generate well-defined latex nanoparticles while improving heat transfer and reducing the use of volatile organic solvents (VOCs). Herein I report the efforts made using a PEGylated ruthenium alkylidene as the catalyst to initiate ROMP in an oil-in-water miniemulsion. 1H NMR revealed that the synthesized PEGylated catalyst was stable and reactive in water. Using 1,5-cyclooctadiene (COD) as monomer, we showed the highly efficient catalyst yielded colloidally stable polymer latexes with ~ 100% conversion at room temperature. Kinetic studies demonstrated first-order kinetics with good livingness as confirmed by the shift of gel permeation chromatography (GPC) traces. Depending on the surfactants used, the particle sizes ranged from 100 to 300 nm with monomodal distributions. The more strained cyclic olefin norbornene (NB) could also be efficiently polymerized with a PEGylated ruthenium alkylidene in miniemulsion to full conversion and with minimal coagulum formation.

On the feasibility of time-lapse superconducting gravimetry for reservoir monitoring

The feasibility of monitoring fluid flow subsurface processes that result in density changes, using the iGrav superconducting gravimeter, is investigated. Practical targets include steam-assisted gravity drainage (SAGD) bitumen depletion and water pumping from aquifers, for which there is currently a void in low-impact, inexpensive monitoring techniques. This study demonstrates that the iGrav has the potential to be applied to multi-scale and diverse reservoirs. Gravity and gravity gradient signals are forward modeled for a real SAGD reservoir at two time steps, and for surface-fed and groundwater-fed aquifer pumping models, to estimate signal strength and directional dependency of water flow. Time-lapse gravimetry on small-scale reservoirs exhibits two obstacles, namely, a µgal sensitivity requirement and high noise levels in the vicinity of the reservoir. In this study, both limitations are overcome by proposing (i) a portable superconducting gravimeter, and (ii) a pair of instruments under various baseline geometries. This results in improved spatial resolution for locating depletion zones, as well as the cancellation of noise common in both instruments. Results indicate that a pair of iGrav superconducting gravimeters meet the sensitivity requirements and the spatial focusing desired to monitor SAGD bitumen migration at the reservoir scales. For SAGD reservoirs, the well pair separation, reservoir depth, and survey sampling determine the resolvability of individual well pair depletion patterns during the steam chamber rising phase, and general reservoir depletion patterns during the steam chamber spreading phase. Results show that monitoring water table elevation changes due to pumping and tracking whether groundwater or surface water is being extracted are feasible.

The Open Data Smart City: A Case Study of Smart City Progress through Open Data Initiatives

Smart cities, cities that are supported by an extensive digital infrastructure of sensors, databases and intelligent applications, have become a major area of academic, governmental and public interest. Simultaneously, there has been a growing interest in open data, the unrestricted use of organizational data for public viewing and use. Drawing on Science and Technology Studies (STS), Urban Studies and Political Economy, this thesis examines how digital processes, open data and the physical world can be combined in smart city development, through the qualitative interview-based case study of a Southern Ontario Municipality, Anytown. The thesis asks what are the challenges associated with smart city development and open data proliferation, is open data complimentary to smart urban development; and how is expertise constructed in these fields? The thesis concludes that smart city development in Anytown is a complex process, involving a variety of visions, programs and components. Although smart city and open data initiatives exist in Anytown, and some are even overlapping and complementary, smart city development is in its infancy. However, expert informants remained optimistic, faithful to a technologically sublime vision of what a smart city would bring. The thesis also questions the notion of expertise within the context of smart city and open data projects, concluding that assertions of expertise need to be treated with caution and scepticism when considering how knowledge is received, generated, interpreted and circulates, within organizations.

Building a Rockfall Database Using Remote Sensing: Techniques for Hazard Management in Canadian Rail Corridors

The section of CN railway between Vancouver and Kamloops runs along the base of many hazardous slopes, including the White Canyon, which is located just outside the town of Lytton, BC. The slope has a history of frequent rockfall activity, which presents a hazard to the railway below. Rockfall inventories can be used to understand the frequency-magnitude relationship of events on hazardous slopes, however it can be difficult to consistently and accurately identify rockfall source zones and volumes on large slopes with frequent activity, leaving many inventories incomplete. We have studied this slope as a part of the Canadian Railway Ground Hazard Research Program and have collected remote sensing data, including terrestrial laser scanning (TLS), photographs, and photogrammetry data since 2012, and used change detection to identify rockfalls on the slope. The objective of this thesis is to use a subset of this data to understand how rockfalls identified from TLS data could be used to understand the frequency-magnitude relationship of rockfalls on the slope. This includes incorporating both new and existing methods to develop a semi-automated workflow to extract rockfall events from the TLS data. We show that these methods can be used to identify events as small as 0.01 m3 and that the duration between scans can have an effect on the frequency-magnitude relationship of the rockfalls. We also show that by incorporating photogrammetry data into our analysis, we can create a 3D geological model of the slope and use this to classify rockfalls by lithology, to further understand the rockfall failure patterns. When relating the rockfall activity to triggering factors, we found that the amount of precipitation occurring over the winter has an effect on the overall rockfall frequency for the remainder of the year. These results can provide the railways with a more complete inventory of events compared to records created through track inspection, or rockfall monitoring systems that are installed on the slope. In addition, we can use the database to understand the spatial and temporal distribution of events. The results can also be used as an input to rockfall modelling programs.

An impulsive differential equation model for Marek's disease

Many dynamical processes are subject to abrupt changes in state. Often these perturbations can be periodic and of short duration relative to the evolving process. These types of phenomena are described well by what are referred to as impulsive differential equations, systems of differential equations coupled with discrete mappings in state space. In this thesis we employ impulsive differential equations to model disease transmission within an industrial livestock barn. In particular we focus on the poultry industry and a viral disease of poultry called Marek's disease. This system lends itself well to impulsive differential equations. Entire cohorts of poultry are introduced and removed from a barn concurrently. Additionally, Marek's disease is transmitted indirectly and the viral particles can survive outside the host for weeks. Therefore, depopulating, cleaning, and restocking of the barn are integral factors in modelling disease transmission and can be completely captured by the impulsive component of the model. Our model allows us to investigate how modern broiler farm practices can make disease elimination difficult or impossible to achieve. It also enables us to investigate factors that may contribute to virulence evolution. Our model suggests that by decrease the cohort duration or by decreasing the flock density, Marek's disease can be eliminated from a barn with no increase in cleaning effort. Unfortunately our model also suggests that these practices will lead to disease evolution towards greater virulence. Additionally, our model suggests that if intensive cleaning between cohorts does not rid the barn of disease, it may drive evolution and cause the disease to become more virulent.

CT Image Electron Density Quantification in Regions with Metal Implants: Implications for Radiotherapy Treatment Planning

In radiotherapy planning, computed tomography (CT) images are used to quantify the electron density of tissues and provide spatial anatomical information. Treatment planning systems use these data to calculate the expected spatial distribution of absorbed dose in a patient. CT imaging is complicated by the presence of metal implants which cause increased image noise, produce artifacts throughout the image and can exceed the available range of CT number values within the implant, perturbing electron density estimates in the image. Furthermore, current dose calculation algorithms do not accurately model radiation transport at metal-tissue interfaces. Combined, these issues adversely affect the accuracy of dose calculations in the vicinity of metal implants. As the number of patients with orthopedic and dental implants grows, so does the need to deliver safe and effective radiotherapy treatments in the presence of implants. The Medical Physics group at the Cancer Centre of Southeastern Ontario and Queen's University has developed a Cobalt-60 CT system that is relatively insensitive to metal artifacts due to the high energy, nearly monoenergetic Cobalt-60 photon beam. Kilovoltage CT (kVCT) images, including images corrected using a commercial metal artifact reduction tool, were compared to Cobalt-60 CT images throughout the treatment planning process, from initial imaging through to dose calculation. An effective metal artifact reduction algorithm was also implemented for the Cobalt-60 CT system. Electron density maps derived from the same kVCT and Cobalt-60 CT images indicated the impact of image artifacts on estimates of photon attenuation for treatment planning applications. Measurements showed that truncation of CT number data in kVCT images produced significant mischaracterization of the electron density of metals. Dose measurements downstream of metal inserts in a water phantom were compared to dose data calculated using CT images from kVCT and Cobalt-60 systems with and without artifact correction. The superior accuracy of electron density data derived from Cobalt-60 images compared to kVCT images produced calculated dose with far better agreement with measured results. These results indicated that dose calculation errors from metal image artifacts are primarily due to misrepresentation of electron density within metals rather than artifacts surrounding the implants.

UNDERSTANDING ESSAY RATING AS A SOCIALLY MEDIATED ACTIVITY: THE CASE OF A HIGH-STAKES ENGLISH TEST IN CHINA

Most essay rating research in language assessment has examined human raters’ essay rating as a cognitive process, thus overlooking or oversimplifying the interaction between raters and sociocultural contexts. Given that raters are social beings, their practices have social meanings and consequences. Hence it is important to situate essay rating within its sociocultural context for a more meaningful understanding. Drawing on Engeström’s (1987, 2001) cultural-historical activity theory (CHAT) framework with a sociocultural perspective, this study reconceptualized essay rating as a socially mediated activity with both cognitive (individual raters’ goal-directed decision-making actions) and social layers (raters’ collective object-oriented essay rating activity at related settings). In particular, this study explored raters’ essay rating at one provincial rating centre in China within the context of a high-stakes university entrance examination, the National Matriculation English Test (NMET). This study adopted a multiple-method multiple-perspective qualitative case study design. Think-aloud protocols, stimulated recalls, interviews, and documents served as the data sources. This investigation involved 25 participants at two settings (rating centre and high schools), including rating centre directors, team leaders, NMET essay raters who were high school teachers, and school principals and teaching colleagues of these essay raters. Data were analyzed using Strauss and Corbin’s (1990) open and axial coding techniques, and CHAT for data integration. The findings revealed the interaction between raters and the NMET sociocultural context. Such interaction can be understood through a surface structure (cognitive layer) and a deep structure (social layer) concerning how raters assessed NMET essays, where the surface structure reflected the “what” and the deep structure explained the “how” and “why” in raters’ decision-making. This study highlighted the roles of goals and rules in rater decision-making, rating tensions and raters’ solutions, and the relationship between essay rating and teaching. This study highlights the value of a sociocultural view to essay rating research, demonstrates CHAT as a sociocultural approach to investigate essay rating, and proposes a direction for future washback research on the effect of essay rating. This study also provides support for NMET rating practices that can potentially bring positive washback to English teaching in Chinese high schools.

QUADRUPOLE CENTRAL TRANSITION NMR SPECTROSCOPY OF QUADRUPOLAR NUCLEI IN SOLUTION

This thesis reports on 17O (I = 5/2) and 59Co (I = 7/2) quadrupole central transition (QCT) NMR studies of three classes of biologically important molecules: glucose, nicotinamide and Vitamin B12 derivatives. Extensive QCT NMR experiments were performed over a wide range of molecular motion by changing solvent viscosity and temperature. 17O-labels were introduced at the 5- and 6-positions respectively: D-[5-17O]-glucose and D-[6-17O]-glucose following the literature method. QCT NMR greatly increased the molecular size limit obtained by ordinary solution NMR. It requires much lower temperatures to get the optimal spectral resolution, which are preferable for biological molecules. In addition, quadrupolar product parameter (PQ) and shielding anisotropy product parameter (PSA) were obtained for hydroxide group and amide group for the first time. For conventional NMR studies of quadrupolar nuclei, only PQ is accessible while QCT NMR obtained both PQ and PSA simultaneously. Our experiments also suggest the resolution of QCT NMR can be even better than that obtained by conventional NMR. We observed for the first time that the second-order quadrupolar interaction becomes a dominant relaxation mechanism under ultraslow motion. All these observations suggest that QCT NMR can become a standard technique for studying quadrupolar nuclei in solution.

A cloud-based system for measuring radiation treatment plan similarity

PURPOSE: Radiation therapy is used to treat cancer using carefully designed plans that maximize the radiation dose delivered to the target and minimize damage to healthy tissue, with the dose administered over multiple occasions. Creating treatment plans is a laborious process and presents an obstacle to more frequent replanning, which remains an unsolved problem. However, in between new plans being created, the patient's anatomy can change due to multiple factors including reduction in tumor size and loss of weight, which results in poorer patient outcomes. Cloud computing is a newer technology that is slowly being used for medical applications with promising results. The objective of this work was to design and build a system that could analyze a database of previously created treatment plans, which are stored with their associated anatomical information in studies, to find the one with the most similar anatomy to a new patient. The analyses would be performed in parallel on the cloud to decrease the computation time of finding this plan. METHODS: The system used SlicerRT, a radiation therapy toolkit for the open-source platform 3D Slicer, for its tools to perform the similarity analysis algorithm. Amazon Web Services was used for the cloud instances on which the analyses were performed, as well as for storage of the radiation therapy studies and messaging between the instances and a master local computer. A module was built in SlicerRT to provide the user with an interface to direct the system on the cloud, as well as to perform other related tasks. RESULTS: The cloud-based system out-performed previous methods of conducting the similarity analyses in terms of time, as it analyzed 100 studies in approximately 13 minutes, and produced the same similarity values as those methods. It also scaled up to larger numbers of studies to analyze in the database with a small increase in computation time of just over 2 minutes. CONCLUSION: This system successfully analyzes a large database of radiation therapy studies and finds the one that is most similar to a new patient, which represents a potential step forward in achieving feasible adaptive radiation therapy replanning.

EDUCATING THE PUBLIC THROUGH NEWS MEDIA: CASE STUDIES OF NEWS LITERACY IN THE NEW MEDIA LANDSCAPE

Two decades of unprecedented changes in the media landscape have increased the complexity of informing the public through news media. With significant changes to the way the news industry does business and the way news consumers access this information, a new set of skills is being proposed as essential for today’s news consumer. News literacy is the use of critical thinking skills to assess the reliability and source of the information that people consume on a daily basis, as well as fostering self-awareness of personal news consumption habits and how it can create audience bias. The purpose of this study was to examine how adults experience the news in their everyday lives and to describe the nature of the news literacy skills people employ in their daily news consumption. This study purposefully selected four adults who have completed high school, and who regularly consume news information across a number of platforms, both traditional and digital. Two of the participants, one man and one woman, were over 50 years old. One other male participant was in his 30’s and the final participant, a young woman, was in her 20’s. They all utilized both traditional and digital media on a regular basis and all had differing skill levels when using social media for information. Their news experiences were documented by in-depth interviews and the completion of seven daily news logs. In their daily logs the participants differentiated news information from other information available on-line but the interviews revealed a contradiction between their intentions and their news consumption practices. All four participants had trouble distinguishing between news and opinion pieces in the news information realm. In addition all but one seemed unaware of their personal bias and any possible effect it was having on their news consumption. Further research should explore the benefits of an adult-centered news literacy curriculum on news consumers similar to the participants, and should examine the development of audience bias and its relationship to the daily exposure people have to the torrent of information that is available to them on a daily basis.

DEVELOPMENT OF AN ADJUSTABLE SUTURE TECHNIQUE FOR TRABECULECTOMY

This research presents a new design of an adjustable suture that could provide a better intraocular pressure (IOP) control in the post treatment of trabeculectomy surgery and limit associated complication with the current suturing techniques. A better control in tension suture brings a great deal of advantages to this surgical technique compared with the traditional adjustable suture. A length adjustment can be added in advance to a 10-0 nylon suture which enables suture tension to be released during the postoperative period of trabeculectomy surgery. This adjustment has a D-ring geometry made of 10-0 nylon suture adhered to a 10-0 nylon surgical suture which is used to close the scalar flap. The D ring was adhered with about 180 microdroplet of Loctite 4311that was found to form a strong joint to connect the D ring to the main 10-0 nylon suture and strong enough to carry the added tension instead after cutting the central suture between the two joints of the D ring. The geometry of adjustment is the key factor of maintaining the IOP at the normal range and keeping the scleral flap tight enough and secure so that aqueous humor continues to percolate under the subconjunctiva. It has been found that a 365, and 450 µm length extensions can release suture tension postoperatively and relieve the intraocular pressure within the eye by 33, and 66% respectively. The fabrication process of the new adjustable suture was divided into two steps: fabrication of micro jig and forming microdroplets. A micro jig was fabricated in order to form and bond a precise length extension to the new design of the adjustable suture. In addition, a new liquid separation technique has been followed in this study in order to generate micro adhesive droplets as small as 50µm for bonding the new adjustable suture structure.

SINGLE STAGE LED DRIVER TECHNOLOGY WITH LOW FREQUENCY RIPPLE CANCELLATION

Because of high efficacy, long lifespan, and environment-friendly operation, LED lighting devices become more and more popular in every part of our life, such as ornament/interior lighting, outdoor lightings and flood lighting. The LED driver is the most critical part of the LED lighting fixture. It heavily affects the purchasing cost, operation cost as well as the light quality. Design a high efficiency, low component cost and flicker-free LED driver is the goal. The conventional single-stage LED driver can achieve low cost and high efficiency. However, it inevitably produces significant twice-line-frequency lighting flicker, which adversely affects our health. The conventional two-stage LED driver can achieve flicker-free LED driving at the expenses of significantly adding component cost, design complexity and low the efficiency. The basic ripple cancellation LED driving method has been proposed in chapter three. It achieves a high efficiency and a low component cost as the single-stage LED driver while also obtaining flicker-free LED driving performance. The basic ripple cancellation LED driver is the foundation of the entire thesis. As the research evolving, another two ripple cancellation LED drivers has been developed to improve different aspects of the basic ripple cancellation LED driver design. The primary side controlled ripple cancellation LED driver has been proposed in chapter four to further reduce cost on the control circuit. It eliminates secondary side compensation circuit and an opto-coupler in design while at the same time maintaining flicker-free LED driving. A potential integrated primary side controller can be designed based on the proposed LED driving method. The energy channeling ripple cancellation LED driver has been proposed in chapter five to further reduce cost on the power stage circuit. In previous two ripple cancellation LED drivers, an additional DC-DC converter is needed to achieve ripple cancellation. A power transistor has been used in the energy channeling ripple cancellation LED driving design to successfully replace a separate DC-DC converter and therefore achieved lower cost. The detailed analysis supports the theory of the proposed ripple cancellation LED drivers. Simulation and experiment have also been included to verify the proposed ripple cancellation LED drivers.