Factors affecting the design and construction of Lamella suspen-dome systems

The suspen-dome system is a new structural form that has become popular in the construction of long-span roof structures. These domes are very slender and lightweight, their configuration is complicated, and hence sequential consideration in the structural design is needed. This paper focuses on these considerations, which include the method for designing cable prestress force, a simplified analysis method, and the estimation of buckling capacity. Buckling is one of the most important problems for dome structures. This paper presents the findings of an intensive buckling study of the Lamella suspen-dome system that takes geometric imperfection, asymmetric loading, rise-to-span ratio, and connection rigidity into consideration. Finally, suggested design and construction guidelines are given in the conclusion of this paper. (c) 2005 Elsevier Ltd. All rights reserved.

Injuries associated with continuous miners, shuttle cars, load-haul-dump and personnel transport in New South Wales underground coal mines

In the three years to June 2005, 959 injuries associated with continuous miners (CMs), shuttle cars (SCs), load–haul–dump and personnel transport (PT) were reported by NSW underground coal mines, comprising 23% of all injuries reported. The present paper reports an analysis of the narrative field accompanying these reports to determine opportunities for controlling injury risks. The most common combinations of activity and mechanism were: strain while handling CM cable (96 injuries); caught between or struck by moving parts while bolting on a CM (86 injuries); strains while bolting on CM (54 injuries); and slipping off a CM during access, egress or other activity (60 injuries). For the other equipment considered, the common injury mechanism was the vehicle running over a pothole or other roadway abnormality causing the driver or passengers to be injured (169 injuries). Potential control measures include: monorails for CM services; hydraulic cable reelers; handrails on CM platforms; redesign of CM platforms and bolting rigs to reduce reach distances during drilling and bolting; improvements to guarding of bolting controls; standardisation and shape coding of bolting controls; two handed fast feed; improvements in underground roadway maintenance, vehicle suspension, visibility and seating; and pedestrian proximity warning devices.

High fidelity radiation pattern measurement system for small antennas

The paper describes a high fidelity system for measuring a radiation pattern of an electrically small antenna. In this system, the Antenna Under Test (AUT) equipped with a battery powered signal generator is suspended by a dielectric foam in the centre of a pair of dielectric rings that are supported by a pedestal of a spherical positioning mechanical sub-system. Radiation patterns are obtained directly in spherical format using a suitably constructed probe antenna of linear or circular polarization. Measurements are controlled by a computer, which also stores and processes the measured data. The results reveal considerable differences between the radiation patterns of a small antenna obtained using the proposed wireless approach and the conventional one, in which the antenna is connected with a cable to the receiver.

A INFLUÊNCIA DA COMPATIBILIDADE PESSOA-TRABALHO SOBRE O ENGAJAMENTO NO TRABALHO SÃO BERNARDO DO CAMPO 2015

O engajamento no trabalho é um dos objetivos dos gestores de pessoas. Este trabalho se propõe a analisar se a compatibilidade da pessoa com o ambiente de trabalho tem relação com o seu engajamento. Há três fatores na compatibilidade com o ambiente de trabalho (person-environment fit): person-job fit, que aborda a compatibilidade entre as habilidades da pessoa e o trabalho que ela realiza; person-organization fit, que está relacionado com os valores da pessoa frente os valores organizacionais; e needs-supply, que aborda a percepção do indivíduo quanto a ter suas necessidades atendidas pelo seu trabalho e pela organização em que trabalha. Construtos do comportamento organizacional, tais como satisfação no trabalho, comprometimento organizacional e intenções de rotatividade são comumente utilizados como variáveis sucessoras nos estudos de compatibilidade (fit), porém não foram encontrados estudos da relação entre a compatibilidade com o ambiente de trabalho (person-environment fit) e o engajamento no trabalho. Esta pesquisa de abordagem quantitativa baseou-se no instrumento Perceptions Fit, proposto por Cable e DeRue, em 2002; e no instrumento UWES Ultrech Work Engagement Scale, de Schaufelli e colaboradores, de 2006. Participaram da pesquisa 114 respondentes com no mínimo seis meses na atividade atual e pelo menos há cinco anos no mercado de trabalho. As análises por Modelagem de Equações Estruturais pelo método PLS (Partial Least Squares) comprovaram a hipótese de que quanto maior a compatibilidade entre a pessoa e seu trabalho, maior é seu engajamento. Além da hipótese central do trabalho de que a compatibilidade pessoa-trabalho influencia o engajamento no trabalho, a influência das dimensões de fit sobre o engajamento foi testada e os resultados mostraram que a dimensão necessidades atendidas (needs-supply) é a que mais influência tem sobre o engajamento. Este estudo inicia a discussão sobre a relação entre a compatibilidade da pessoa com o ambiente de trabalho e o seu engajamento, sugerindo reaplicação do método em públicos diferenciados, a fim de que os resultados possam ser utilizados para uma melhor eficácia da gestão de pessoas.

ISTO NÃO É TV, É MTV: linguagem da MTV brasileira

A MTV brasileira está no ar há 15 anos no Brasil e desde o início de suas transmissões, em 1990, evoluiu consideravelmente a variedade de programas que oferece diariamente em sua grade de programação, saindo da simples reprodução de videoclipes. Essa variedade de programas, no entanto, é caracterizada por uma unidade discursiva que diferencia a MTV das outras emissoras de televisão aberta. Enquanto outras emissoras trabalham com gêneros diferentes de programas, em especial as que compõem a grade de programação de televisão aberta, a MTV consegue criar uma grade de programação diversificada, sempre direcionada a um público específico: o universo jovem. Objetivou-se realizar uma leitura qualitativa da linguagem do material simbólico que esta emissora produz a uma faixa de público especializada, subsidiada pela análise crítica de discurso, a semiótica e os estudos teóricos da Comunicação Social. Compõem o corpus de análise, os programas e vinhetas inéditos da semana de 23 a 29 de janeiro de 2006. Não foram consideradas as reprises. Demonstrou-se que é possível identificar uma estrutura discursiva que compõe uma linguagem, um discurso, que caracterizam a MTV e a diferenciam de outros canais de televisão aberta e a cabo. Uma linguagem que combina elementos do universo de sua principal audiência, os jovens. Palavras-chave: comunicação, MTV, análise de discurso, semiótica, jovem.

Improper organization of the actin cytoskeleton affects protein synthesis at initiation

Although the actin cytoskeleton and the translation machinery are considered to be separate cellular complexes, growing evidence supports overlapping regulation of the two systems. Because of its interaction with actin, the eukaryotic translation elongation factor 1A (eEF1A) is proposed to be a regulator or link between these processes. Using a genetic approach with the yeast Saccharomyces cerevisiae, specific regions of eEF1A responsible for actin interactions and bundling were identified. Five new mutations were identified along one face of eEF1A. Dramatic changes in cell growth, cell morphology, and actin cable and patch formation as well as a unique effect on total translation in strains expressing the F308L or S405P eEF1A mutant form were observed. The translation effects do not correlate with reduced translation elongation but instead include an initiation defect. Biochemical analysis of the eEF1A mutant forms demonstrated reduced actin-bundling activity in vitro. Reduced total translation and/or the accumulation of 80S ribosomes in strains with either a mutation or a null allele of genes encoding actin itself or actin-regulating proteins Tpm1p, Mdm20p, and Bnirp/Bni1p was observed. Our data demonstrate that eEF1A, other actin binding proteins, and actin mutants affect translation initiation through the actin cytoskeleton.

Electromagnetic interference from variable speed motor drives

A methodology is presented which can be used to produce the level of electromagnetic interference, in the form of conducted and radiated emissions, from variable speed drives, the drive that was modelled being a Eurotherm 583 drive. The conducted emissions are predicted using an accurate circuit model of the drive and its associated equipment. The circuit model was constructed from a number of different areas, these being: the power electronics of the drive, the line impedance stabilising network used during the experimental work to measure the conducted emissions, a model of an induction motor assuming near zero load, an accurate model of the shielded cable which connected the drive to the motor, and finally the parasitic capacitances that were present in the drive modelled. The conducted emissions were predicted with an error of +/-6dB over the frequency range 150kHz to 16MHz, which compares well with the limits set in the standards which specify a frequency range of 150kHz to 30MHz. The conducted emissions model was also used to predict the current and voltage sources which were used to predict the radiated emissions from the drive. Two methods for the prediction of the radiated emissions from the drive were investigated, the first being two-dimensional finite element analysis and the second three-dimensional transmission line matrix modelling. The finite element model took account of the features of the drive that were considered to produce the majority of the radiation, these features being the switching of the IGBT's in the inverter, the shielded cable which connected the drive to the motor as well as some of the cables that were present in the drive.The model also took account of the structure of the test rig used to measure the radiated emissions. It was found that the majority of the radiation produced came from the shielded cable and the common mode currents that were flowing in the shield, and that it was feasible to model the radiation from the drive by only modelling the shielded cable. The radiated emissions were correctly predicted in the frequency range 30MHz to 200MHz with an error of +10dB/-6dB. The transmission line matrix method modelled the shielded cable which connected the drive to the motor and also took account of the architecture of the test rig. Only limited simulations were performed using the transmission line matrix model as it was found to be a very slow method and not an ideal solution to the problem. However the limited results obtained were comparable, to within 5%, to the results obtained using the finite element model.

Short-circuit and ground fault analyses and location in VSC-based DC network cables

The application of high-power voltage-source converters (VSCs) to multiterminal dc networks is attracting research interest. The development of VSC-based dc networks is constrained by the lack of operational experience, the immaturity of appropriate protective devices, and the lack of appropriate fault analysis techniques. VSCs are vulnerable to dc-cable short-circuit and ground faults due to the high discharge current from the dc-link capacitance. However, faults occurring along the interconnecting dc cables are most likely to threaten system operation. In this paper, cable faults in VSC-based dc networks are analyzed in detail with the identification and definition of the most serious stages of the fault that need to be avoided. A fault location method is proposed because this is a prerequisite for an effective design of a fault protection scheme. It is demonstrated that it is relatively easy to evaluate the distance to a short-circuit fault using voltage reference comparison. For the more difficult challenge of locating ground faults, a method of estimating both the ground resistance and the distance to the fault is proposed by analyzing the initial stage of the fault transient. Analysis of the proposed method is provided and is based on simulation results, with a range of fault resistances, distances, and operational conditions considered.

A review of current knowledge on Electronic Vision Enhancement Systems for the visually impaired

Magnification can be provided to assist those with visual impairment to make the best use of remaining vision. Electronic transverse magnification of an object was first conceived for use in low vision in the late 1950s, but has developed slowly and is not extensively prescribed because of its relatively high cost and lack of portability. Electronic devices providing transverse magnification have been termed closed-circuit televisions (CCTVs) because of the direct cable link between the camera imaging system and monitor viewing system, but this description generally refers to surveillance devices and does not indicate the provision of features such as magnification and contrast enhancement. Therefore, the term Electronic Vision Enhancement Systems (EVES) is proposed to better distinguish and describe such devices. This paper reviews current knowledge on EVES for the visually impaired in terms of: classification; hardware and software (development of technology, magnification and field-of-view, contrast and image enhancement); user aspects (users and usage, reading speed and duration, and training); and potential future development of EVES. © 2003 The College of Optometrists.

Simulation of power quality issues in more electric aircraft actuator supplies

To examine the detailed operation of the power distribution network in a future more electric aircraft that employs electric actuation systems, a Micro-Cap SPICE simulation is developed for one of the essential buses. Particular attention is paid to model accurately the most important effects that influence system power quality. Representative system and flight data are used to illustrate the operation of the simulation and to assess the power quality conditions within the network as the flight control surfaces are deployed. The results illustrate the importance of correct cable sizing to ensure stable operation of actuators during transient conditions.

Protection schemes for meshed VSC-HVDC transmission systems for large-scale offshore wind farms

This chapter discusses network protection of high-voltage direct current (HVDC) transmission systems for large-scale offshore wind farms where the HVDC system utilizes voltage-source converters. The multi-terminal HVDC network topology and protection allocation and configuration are discussed with DC circuit breaker and protection relay configurations studied for different fault conditions. A detailed protection scheme is designed with a solution that does not require relay communication. Advanced understanding of protection system design and operation is necessary for reliable and safe operation of the meshed HVDC system under fault conditions. Meshed-HVDC systems are important as they will be used to interconnect large-scale offshore wind generation projects. Offshore wind generation is growing rapidly and offers a means of securing energy supply and addressing emissions targets whilst minimising community impacts. There are ambitious plans concerning such projects in Europe and in the Asia-Pacific region which will all require a reliable yet economic system to generate, collect, and transmit electrical power from renewable resources. Collective offshore wind farms are efficient and have potential as a significant low-carbon energy source. However, this requires a reliable collection and transmission system. Offshore wind power generation is a relatively new area and lacks systematic analysis of faults and associated operational experience to enhance further development. Appropriate fault protection schemes are required and this chapter highlights the process of developing and assessing such schemes. The chapter illustrates the basic meshed topology, identifies the need for distance evaluation, and appropriate cable models, then details the design and operation of the protection scheme with simulation results used to illustrate operation. © Springer Science+Business Media Singapore 2014.

Permanent magnet synchronous generator based wind power generation system fault protection schemes

The PMSG-based wind power generation system protection is presented in this paper. For large-scale systems, a voltagesource converter rectifier is included. Protection circuits for this topology are studied with simulation results for cable permanent fault conditions. These electrical protection methods are all in terms of dumping redundant energy resulting from disrupted path of power delivery. Pitch control of large-scale wind turbines are considered for effectively reducing rotor shaft overspeed. Detailed analysis and calculation of damping power and resistances are presented. Simulation results including fault overcurrent, DC-link overvoltage and wind turbine overspeed are shown to illustrate the system responses under different protection schemes to compare their application and effectiveness.

Reach extension of high-capacity LR-PONs in chain configuration of distributed amplifier structure

We show 100-Gb/s single-channel transmission in LR-PONs with at least 512 way split and up to 160 km total distance is feasible by means of "chained" cable with amplifier solutions, and appropriate FIR filter designs. © 2015 OSA.

E-közigazgatás Európában? Jelen és jövő (E-Government in Europe)

A jövő közigazgatásában az ügyfélbarát ügyfélszolgálat több olyan elektronikus csatornán is jelen lesz, amelyek csoportját jelenleg az on-line internetkapcsolat, a mobiltelefon és az interaktív digitális televízió, a jövőben az on-line interaktív multimédia képviseli. Az európai elektronikus közigazgatási fejlődési trend arra mutat, hogy a jövőben internet, mobilinternet és/vagy intelligens kábel tv technológiát alkalmazva, egy virtuálisan élő ügyintézővel beszélgetve juthat az ügyfél információhoz, foglalhat időpontot és indíthat érdemi ügyintézést. ________ In the course of future’s customer friendly public administration there will be some info-communication channels which are represented today by the on-line Internet accessibility, mobile telephones, and interactive digital television and the forthcoming interactive multimedia. The European trend of the development of public administration relies on Internet mobile Internet and/or intelligent cable television technology employing virtual adminsitrators as real time partner sin obtaining office information, booking appointments or launching adminsitration workflow.

Teachers' knowledge, awareness, and pedagogy of global education in secondary schools

In 1979, the Florida State Board of Education approved the teaching of global education in the state of Florida. The purpose of this study was to examine the factors that contributed to teachers' global knowledge, global mindedness, and pedagogy in global education. The Hanvey model of teaching from a global perspective was the theoretical framework for the study. ^ A total of 90 secondary teachers from Miami-Dade County Public Schools were randomly selected and placed in three groups: Globally Oriented Social Studies Program (GOSSE), Non-Globally Oriented Social Studies Program (non-GOSSE), and Teachers Who Teach Other Subjects (TWTOS). Seven teachers, two of whom team-taught a class, were selected for classroom observations and interviews. A mixed methods design that combined quantitative and qualitative data was used. ANOVA and Chi square techniques were used to determine whether the factors that contributed to teachers' global knowledge and global mindedness differ among groups. Classroom observations and interviews were conducted to determine whether the instructional strategies differ among the seven selected teachers. ^ The findings of the study show that teachers who were trained in teaching from a global perspective differed in their global knowledge and used more appropriate instructional strategies than teachers who were not trained in teaching global perspectives. There was no significant difference in the combined global knowledge of the non-GOSSE and TWTOS groups when compared with the GOSSE group. There was no significant difference in the combined global knowledge of the GOSSE and non-GOSSE groups when compared with the TWTOS group. There was no significant difference among the teachers in their global mindedness. Observation and interview data indicate that current events, role-playing, simulations, open-ended discussion, debates, and projects were the predominant instructional strategies used by globally trained teachers. Cable networks, Internet, magazines, and newspapers were found to be the dominant tools for teaching global education. ^ This study concluded that teachers who were trained in globally oriented programs had more global knowledge than teachers who were not. It is recommended that teacher education programs should incorporate a global perspective in the preparation of social studies teachers, with particular attention to developing their global attitudes. ^