Fully 3D refraction correction dosimetry system

The irradiation of selective regions in a polymer gel dosimeter results in an increase in optical density and refractive index (RI) at those regions. An optical tomography-based dosimeter depends on rayline path through the dosimeter to estimate and reconstruct the dose distribution. The refraction of light passing through a dose region results in artefacts in the reconstructed images. These refraction errors are dependant on the scanning geometry and collection optics. We developed a fully 3D image reconstruction algorithm, algebraic reconstruction technique-refraction correction (ART-rc) that corrects for the refractive index mismatches present in a gel dosimeter scanner not only at the boundary, but also for any rayline refraction due to multiple dose regions inside the dosimeter. In this study, simulation and experimental studies have been carried out to reconstruct a 3D dose volume using 2D CCD measurements taken for various views. The study also focuses on the effectiveness of using different refractive-index matching media surrounding the gel dosimeter. Since the optical density is assumed to be low for a dosimeter, the filtered backprojection is routinely used for reconstruction. We carry out the reconstructions using conventional algebraic reconstruction (ART) and refractive index corrected ART (ART-rc) algorithms. The reconstructions based on FDK algorithm for cone-beam tomography has also been carried out for comparison. Line scanners and point detectors, are used to obtain reconstructions plane by plane. The rays passing through dose region with a RI mismatch does not reach the detector in the same plane depending on the angle of incidence and RI. In the fully 3D scanning setup using 2D array detectors, light rays that undergo refraction are still collected and hence can still be accounted for in the reconstruction algorithm. It is found that, for the central region of the dosimeter, the usable radius using ART-rc algorithm with water as RI matched medium is 71.8%, an increase of 6.4% compared to that achieved using conventional ART algorithm. Smaller diameter dosimeters are scanned with dry air scanning by using a wide-angle lens that collects refracted light. The images reconstructed using cone beam geometry is seen to deteriorate in some planes as those regions are not scanned. Refraction correction is important and needs to be taken in to consideration to achieve quantitatively accurate dose reconstructions. Refraction modeling is crucial in array based scanners as it is not possible to identify refracted rays in the sinogram space.

Vaporization of heated materials into discharge plasmas

The vaporization of condensed materials in contact with high-current discharge plasmas is considered. A kinetic numerical method named direct simulation Monte Carlo (DSMC) and analytical kinetic approaches based on the bimodal distribution function approximation are employed. The solution of the kinetic layer problem depends upon the velocity at the outer boundary of the kinetic layer which varies from very small, corresponding to the high-density plasma near the evaporated surface, up to the sound speed, corresponding to evaporation into vacuum. The heavy particles density and temperature at the kinetic and hydrodynamic layer interface were obtained by the analytical method while DSMC calculation makes it possible to obtain the evolution of the particle distribution function within the kinetic layer and the layer thickness.

Partition Energy Absorption of Axially Crushed Aluminum Foam-Filled Hat Sections

The "interaction effect" between aluminum foam and metal column that takes place when foam-filled hat sections (top-hats and double-hats) are axially crushed was investigated in this paper. Based on experimental examination, numerical simulation and analytical models, a systemic approach was developed to partition the energy absorption quantitatively into the foam filler component and the hat section component, and the relative contribution of each component to the overall interaction effect was therefore evaluated. Careful observation of the collapse profile found that the crushed foam filler could be further divided into two main energy-dissipation regions: densified region and extremely densified region. The volume reduction and volumetric strain of each region were empirically estimated. An analytical model pertinent to the collapse profile was thereafter proposed to find the more precise relationship between the volume reduction and volumetric strain of the foam filler. Combined the superfolding element model for hat sections with the current model according to the coupled method, each component energy absorption was subsequently derived, and the influence of some controlling factors was discussed. According to the finite element analysis and the theoretical modeling, when filled with foam, energy absorption was found to be increased both in the hat section and the foam filler, whereas the latter contributes predominantly to the interaction effect. The formation of the extremely densified region in the foam filler accounts for this effect.

Investigation on Depth of Heat Affected Zone of Discharge Spot by High Repetitive Rate YAG Laser-Induced Discharge Texturing

It is known that the press formability and the elongation of laser textured sheet are improved, and the service life of textured roll is longer than that of the un-textured roll due to hardening of the treated surface. One of the goals to develop high repetitive rate YAG laser-induced discharge texturing (LIDT) is to get deeper hardening zone. By observing and measuring cross-section of LIDT spots in different discharge conditions, it is found that the single-crater, which is formed by the discharge conditions of anode, which is covered by an oil film and with rectangular current waveform, has the most depth of heat affected zone (HAZ) comparing with other crater shapes when discharge energy is the same. The depth of HAZ is mainly depends on pulse duration when the discharge spot is single-crater. The results are analyzed.

Nonlinear Mechanical Modeling Of Cell Adhesion

Cell adhesion, which is mediated by the receptor-ligand bonds, plays an essential role in various biological processes. Previous studies often described the force-extension relationship of receptor-ligand bond with linear assumption. However, the force-extension relationship of the bond is intrinsically nonlinear, which should have significant influence on the mechanical behavior of cell adhesion. In this work, a nonlinear mechanical model for cell adhesion is developed, and the adhesive strength was studied at various bond distributions. We find that the nonlinear mechanical behavior of the receptor-ligand bonds is crucial to the adhesive strength and stability. This nonlinear behavior allows more bonds to achieve large bond force simultaneously, and therefore the adhesive strength becomes less sensitive to the change of bond density at the outmost periphery of the adhesive area. In this way, the strength and stability of cell adhesion are soundly enhanced. The nonlinear model describes the cell detachment behavior better than the linear model. (C) 2007 Elsevier Ltd. All rights reserved.

[V_Valencia_Catedral] Documentación Geométrica de la Portada de los Hierros de la Catedral de Valencia

[ES] La Portada de los Hierros tiene una configuración de retablo en piedra con una variada iconografía: cornisas, estatuas, escudos… Está formado por tres cuerpos, el central de 35 metros de altura y los dos laterales de 24, la anchura de cada uno es de unos 9 metros. Los cuerpos laterales se distribuyen en altura mediante tres niveles, teniendo el central un cuarto nivel superior que remata en una cruz flanqueada por dos figuras.

Modeling of a Laminar DC Arc Plasma Torch

In recent years, stable and long laminarplasma jets have been successfully generated, and thus it is possible to achieve low-noise working surroundings, better process repeatability and controllability, and reduced metal-oxidation degree in plasma materials processing. With such a recent development in thermal plasma science and technology as the main research background, modeling studies are performed concerning the DCarcplasmatorch for generating the long laminar argon plasma jet. Two different two-dimensional modeling approaches are employed to deal with the arc-root attachment at the anode surface. The first approach is based on circumferentially uniform arc-root attachment, while the second uses the so-called fictitious anode method. Modeling results show that the highest temperature and maximum axial-velocity at the plasmatorch exit are ～15000 K and ～1100 m/s, respectively, for the case with arc current of 160 A and argon flow rate of 1.95×10{sup}(-4)kg/s.

Distribution of skipjack in the Pacific Ocean, based on records of incidental catches of the Japanese longline tuna fishery

ENGLISH: All available longline data on skipjack captured in the Pacific Ocean by Japanese research vessels (1949-1965) and from incidental skipjack catches by Japanese commercial vessels (1956-1964) were analyzed. As skipjack are not specifically sought by longline vessels, the data are limited. Considering this it was found that: longline gear captures skipjack of wider size-range and is more selective for larger skipjack than conventional fishing methods, i.e. pole-and-line and purse-seine; skipjack are widely and almost continuously distributed across the Pacific; throughout the year average hook-rates are greater in the southeastern Pacific than in the northwestern Pacific; areas of high hook-rate shift south during the second and third quarters and north during the first and fourth quarters; in the western Pacific the north-south range of the catch distribution was greatest in the first and fourth quarters; skipjack hook-rates are relatively high in the northwestern Pacific east of Japan only during the first and fourth quarters; the highest hook-rates were recorded in extensive areas along the equator (from lO°N to 20°8 between approximately 155°W-100°W); generally more skipjack were captured by research longline gear in water temperature ranges approaching both the upper and lower temperature limits of skipjack distribution (18-21C and 26-28C), than is the case in surface skipjack fisheries; tentative comparisons of longline skipjack catch distributions with Pacific current systems, suggests low skipjack abundance in both North Pacific Central and North Pacific Equatorial water; the sex ratio was 95 males : 63 females in a small sample of skipjack examined; longlines capture skipjack of three, and possibly more, age groups; in skipjack size-composition samples studied, the smaller modal group (65 cm) observed in January-March in the northwestern Pacific (1600E-180oE and 20oN-45°N) corresponds in size to the larger modal group appearing in the late-summer surface fishery off the Izu-Bonin Islands southeast of Japan, and also compares in modal size to the skipjack taken in the Hawaiian fishery in spring time; the analysis of skipjack catches by hook position on the longline and by death-rate studies, indicates that part of the catch is made while the gear is in motion near the surface, and a lesser part of the catch is made when the gear is stabilized at a depth of 70 to 140 m. A brief discussion is given, in the light of new information presented, on several hypotheses by other authors concerning the population structure and migration of skipjack in the Pacific Ocean. SPANISH: Se analizaron todos los datos disponibles de la pesca con palangre de barriletes capturados en el Océano Pacífico por barcos japoneses de investigación (1949-1965) y por las capturas incidentales de los barcos comerciales japoneses (1956-1964). Como los barcos palangreros específicamente, no persiguen al barrilete, los datos son limitados. Considerando ésto, se encontró: que el arte palangrero obtiene barriletes con una distribución más amplia de tallas, y es más selectivo en cuanto a los barriletes de mayor talla, que los métodos convencionales de pesca, Le. cañas de pescar y redes de cerco; el barrilete se encuentra amplia y casi continuamente distribuido a través del Pacífico; en todo el año, las tasas promedio de captura por anzuelo son superiores en el Pacífico sudoriental que las del Pacífico noroeste; las áreas con una tasa alta de captura por anzuelo, se cambian hacia el sur durante los trimestres segundo y tercero, y durante los trimestres primero y cuarto hacia el norte; en el Pacífico occidental la amplitud de la distribución de captura norte-sur, fue superior en los trimestres primero y cuarto; las tasas de captura por anzuelo de barrilete, son relativamente altas en el Pacífico noroeste al este del Japón, únicamente durante los trimestres primero y cuarto; las tasas de captura por anzuelo más altas fueron registradas en extensas áreas a lo largo del ecuador (desde los 10°N hasta los 20°S, aproximadamente entre los 155°W-100°W) ; generalmente las artes palangreras de investigación capturaron más barrilete en aguas en las que la temperatura se aproximaba a los límites más altos o bajos de la temperatura en la distribución del barrilete (18-21 C y 26-28 C), que en el caso de la pesca superficial de barrilete; las comparaciones tentativas de la captura de barrilete con palangre, con el sistema de las corrientes del Pacífico, sugieren una abundancia inferior de barrilete tanto en las aguas del Pacífico central del norte como en las del Pacífico ecuatorial del norte; la proporcíon sexual examinada en una pequeña muestra de barriletes, fue de 95 machos y 63 hembras; los palangreros capturan barriletes de tres grupos de edad y posiblemente de más; en las muestras estudiadas de la composición de las tallas de barrilete, el grupo modal más pequeño (65 cm), observado en enero-marzo en el Pacífico noroeste (160 0E-180° y 20 oN-45°N), corresponde en talla al grupo modal más grande que aparece en la pesca de superficie a fines del verano frente a las Islas Izu-Bonín al sudeste del Japón, y se compara también con la talla modal del barrilete obtenido en la pesca hawaiana en la época de primavera; el análisis de las capturas de barrilete por medio del estudio de la posición de los anzuelos en el palangre y por la tasa de mortalidad, indica que parte de la captura se efectúa cuando el equipo está en movimiento cerca a la superficie y una parte inferior de la captura se realiza, cuando las artes se estabilizan a una profundidad de 70 a 140 m. Se ofrece una breve discusión sobre varias hipótesis de otros autores, en vista de la nueva información presentada referente a la estructura poblacional y a la migración del barrilete en el Océano Pacífico. (PDF contains 100 pages.)

Psychobiophysics of transcranial magnetic stimulation

Transcranial magnetic stimulation (TMS) is a technique that stimulates the brain using a magnetic coil placed on the scalp. Since it is applicable to humans non-invasively, directly interfering with neural electrical activity, it is potentially a good tool to study the direct relationship between perceptual experience and neural activity. However, it has been difficult to produce a clear perceptible phenomenon with TMS of sensory areas, especially using a single magnetic pulse. Also, the biophysical mechanisms of magnetic stimulation of single neurons have been poorly understood.

In the psychophysical part of this thesis, perceptual phenomena induced by TMS of the human visual cortex are demonstrated as results of the interactions with visual inputs. We first introduce a method to create a hole, or a scotoma, in a flashed, large-field visual pattern using single-pulse TMS. Spatial aspects of the interactions are explored using the distortion effect of the scotoma depending on the visual pattern, which can be luminance-defined or illusory. Its similarity to the distortion of afterimages is also discussed. Temporal interactions are demonstrated in the filling-in of the scotoma with temporally adjacent visual features, as well as in the effective suppression of transient visual features. Also, paired-pulse TMS is shown to lead to different brightness modulations in transient and sustained visual stimuli.

In the biophysical part, we first develop a biophysical theory to simulate the effect of magnetic stimulation on arbitrary neuronal structure. Computer simulations are performed on cortical neuron models with realistic structure and channels, combined with the current injection that simulates magnetic stimulation. The simulation results account for general and basic characteristics of the macroscopic effects of TMS including our psychophysical findings, such as a long inhibitory effect, dependence on the background activity, and dependence on the direction of the induced electric field.

The perceptual effects and the cortical neuron model presented here provide foundations for the study of the relationship between perception and neural activity. Further insights would be obtained from extension of our model to neuronal networks and psychophysical studies based on predictions of the biophysical model.

The effect of long term exploitation by the gill net fishery on the multispecies fish stocks in Kainji Lake, Nigeria, 1969-1997

The findings are presented of an assessment made of the gillnet fishery in Kainji Lake, Nigeria from 1969 to the present, on the basis of data sets from commercial and experimental gillnet fishing, with the purpose to detect trends in some key fishery monitoring indicators. During this period, there has been an increase in the number of small meshed nets in the fishery resulting in a shift in the mode to lower mesh sizes; consequently, the average mesh size declined gradually in the fishery. This trend is found to be directly correlated with the decline in the CPUE and mean weight of the fish species. It is argued that the observed trend in CPUE and mean weight is forcing the fishermen to switch effort to gears such as traps which have very small meshes and can indescriminately take all sizes of the fish. It is shown that the catch composition by weight of Citharinus citharus, Lates niloticus and tilapias declined in the gillnet fishery in the late 70's and early 80's. Recent data, from 1994 to 1996, however indicates that C. citharus is recovering, but with declining mean weight. This suggests that the exploitation pattern is shifting to the smaller fish through the use of small meshed nets. In general, however, there has not been drastic changes in species bio-diversity in the Lake as a result of predatory effect and ecosystem overfishing as has happened in other great African Lakes. The species composition since lake formation continued to be dominated by fewer that 20 species. The potential yield for the lake has been estimated to be 32,166 tonnes (excluding clupeids) and the required optimum fishing effort to be 1,814 fishing canoes. In view of the relative stability of the species diversity in the lake and the current fish production level, it is proposed here that this MSY be adopted for all species. This would be achieved with the current effort level in the lake assuming that the efficiency of the fishermen and their gears do not improve. It should be reviewed after 10 or more years of catch and effort data collection. (PDF contains 65 pages)

Fisheries statistical bulletin, Kainji Lake, Nigeria, 1998

A tabulated summary is presented of the main fisheries data collected to date (1998) by the Nigerian-German Kainji Lake Fisheries Promotion Project, together with a current overview of the fishery. The data are given under the following sections: 1) Fishing localities and types; 2) Frame survey data; 3) Number of licensed fishermen by state; 4) Mesh size distribution; 5) Fishing net characteristics; 6) Fish yield; 7) Total annual fishing effort by gear type; 8) Total annual value of fish landed by gear type; 9) Graphs of effort and CPUE by gear type. (PDF contains 36 pages)

Fisheries statistical bulletin, Kainji Lake, Nigeria, 1999

A tabulated summary is presented of the main Lake Kainji fisheries data collected to date (1999) by the Nigerian-German Kainji Lake Fisheries Promotion Project, together with a current overview of the fishery. The data are given under the following sections: 1) Fishing localities and types; 2) Frame survey data; 3) Number of licensed fishermen by state; 4) Mesh size distribution; 5) Fishing net characteristics; 6) Fish yield; 7) Average monthly CPUE by gear type; 8)Average monthly fishing activity by gear type; 9) Total annual fishing effort by gear type; 10) Total annual value of fish landed by gear type; 11) Trends of the total yield by gear type. (PDF contains 34 pages)

Water quality strategy for the Lockwoods Folly River: A partnership for an ailing river

As with a majority of the remaining undeveloped coastal areas in North Carolina, Brunswick County is not a hidden treasure any more. Since 1980 the county’s population has more than tripled to over 95,000 and another 30,000 or so residents are expected to make this last bastion of undeveloped southeastern NC their home by 2020, even with the current economic downturn. As the 29th fastest growing county in the nation this population explosion is resulting in rapid landscape scale land use changes within the watershed of the Lockwoods Folly River. Subdivisions, shopping centers, new highways and bridges, golf courses, and marinas are becoming significant land use activities. The surging development within this 150-square mile 88 thousand-acre watershed has had a severe effect on the health of the river. The portion of the river closed to shell fishing has more that tripled from 18 percent in 1980 to more than 55 percent today and 60% of the beds are considered impaired. For generations, locals have enjoyed the bounty of the Lockwoods Folly River and estuarine system famed for its rich and abundant shell fish beds and excellent coastal inshore fishing. This river system stretches from the Lockwoods Folly Inlet at the Atlantic Ocean inland where it makes the transformation from saltwater marshes to a winding blackwater river that snakes into hundreds of smaller tributaries and blackwater swamps. (PDF contains 4 pages)

Neue Chance für Scholle und Kabeljau in der Nordsee

Two surveys in the German Bight revealed a relatively good recruitment for plaice and cod. However, with the current high effort and uneconomic way of fishing, most of these fish will end as discards. To protect young plaice during the winter months an increase of the mesh opening in beam trawls within the plaice box is suggested. Therefore, the fishermen are called upon to make a more considerated selection of their nets.

Manuais do professor do ensino médio: imagens discursivas de professor e de ensino de ELE

O estudo situa-se no âmbito das investigações voltadas para documentos que sistematizam o trabalho do professor, dentre eles, o manual do professor que organiza a atividade docente junto ao livro didático. A dissertação analisa manuais do professor dos livros de espanhol selecionados pelo MEC para serem distribuídos a professores, em 2005, em função da lei 11161 da obrigatoriedade do ensino da língua espanhola para o ensino médio em todo o território nacional. O objetivo foi identificar imagens discursivas de docente e de ensino de espanhol como língua estrangeira neles construídas. Os fundamentos teóricos adotados advêm da Análise do Discurso de base enunciativa, além de recorrermos aos conceitos de dialogismo (BAKHTIN, 1979) e de polifonia (BAKHTIN, 1979; DUCROT, 1987). Os resultados nesses manuais apontam para a construção de imagens de professor como: aquele que necessita ser guiado em sua tarefa, incapaz de realizar suas escolhas em sala de aula, um professor recebedor de ordens; desatualizado com as metodologias de ensino atuais, necessitando, portanto, de atualização profissional; há ainda um professor que busca instruções facilitadoras para seu trabalho. Já no que se refere à visão de língua, deparamo-nos com um manual que dá ênfase ao trabalho com a leitura, voltado para uma concepção que valoriza aspectos discursivos; outros que afirmam seguir a abordagem comunicativa, com um olhar para a língua em uso, porém adotam procedimentos pautados numa concepção de língua como estrutura e/ou misturam ambas perspectivas