929 resultados para Blast mats
Resumo:
Throughout the industrial processes of sheet metal manufacturing and refining, shear cutting is widely used for its speed and cost advantages over competing cutting methods. Industrial shears may include some force measurement possibilities, but the force is most likely influenced by friction losses between shear tool and the point of measurement, and are in general not showing the actual force applied to the sheet. Well defined shears and accurate measurements of force and shear tool position are important for understanding the influence of shear parameters. Accurate experimental data are also necessary for calibration of numerical shear models. Here, a dedicated laboratory set-up with well defined geometry and movement in the shear, and high measurability in terms of force and geometry is designed, built and verified. Parameters important to the shear process are studied with perturbation analysis techniques and requirements on input parameter accuracy are formulated to meet experimental output demands. Input parameters in shearing are mostly geometric parameters, but also material properties and contact conditions. Based on the accuracy requirements, a symmetric experiment with internal balancing of forces is constructed to avoid guides and corresponding friction losses. Finally, the experimental procedure is validated through shearing of a medium grade steel. With the obtained experimental set-up performance, force changes as result of changes in studied input parameters are distinguishable down to a level of 1%.
Resumo:
BACKGROUND: Facilitation of local women's groups may reportedly reduce neonatal mortality. It is not known whether facilitation of groups composed of local health care staff and politicians can improve perinatal outcomes. We hypothesised that facilitation of local stakeholder groups would reduce neonatal mortality (primary outcome) and improve maternal, delivery, and newborn care indicators (secondary outcomes) in Quang Ninh province, Vietnam. METHODS AND FINDINGS: In a cluster-randomized design 44 communes were allocated to intervention and 46 to control. Laywomen facilitated monthly meetings during 3 years in groups composed of health care staff and key persons in the communes. A problem-solving approach was employed. Births and neonatal deaths were monitored, and interviews were performed in households of neonatal deaths and of randomly selected surviving infants. A latent period before effect is expected in this type of intervention, but this timeframe was not pre-specified. Neonatal mortality rate (NMR) from July 2008 to June 2011 was 16.5/1,000 (195 deaths per 11,818 live births) in the intervention communes and 18.4/1,000 (194 per 10,559 live births) in control communes (adjusted odds ratio [OR] 0.96 [95% CI 0.73-1.25]). There was a significant downward time trend of NMR in intervention communes (p = 0.003) but not in control communes (p = 0.184). No significant difference in NMR was observed during the first two years (July 2008 to June 2010) while the third year (July 2010 to June 2011) had significantly lower NMR in intervention arm: adjusted OR 0.51 (95% CI 0.30-0.89). Women in intervention communes more frequently attended antenatal care (adjusted OR 2.27 [95% CI 1.07-4.8]). CONCLUSIONS: A randomized facilitation intervention with local stakeholder groups composed of primary care staff and local politicians working for three years with a perinatal problem-solving approach resulted in increased attendance to antenatal care and reduced neonatal mortality after a latent period. TRIAL REGISTRATION: Current Controlled Trials ISRCTN44599712. Please see later in the article for the Editors' Summary.
Resumo:
Background: The gap between what is known and what is practiced results in health service users not benefitting from advances in healthcare, and in unnecessary costs. A supportive context is considered a key element for successful implementation of evidence-based practices (EBP). There were no tools available for the systematic mapping of aspects of organizational context influencing the implementation of EBPs in low- and middle-income countries (LMICs). Thus, this project aimed to develop and psychometrically validate a tool for this purpose. Methods: The development of the Context Assessment for Community Health (COACH) tool was premised on the context dimension in the Promoting Action on Research Implementation in Health Services framework, and is a derivative product of the Alberta Context Tool. Its development was undertaken in Bangladesh, Vietnam, Uganda, South Africa and Nicaragua in six phases: (1) defining dimensions and draft tool development, (2) content validity amongst in-country expert panels, (3) content validity amongst international experts, (4) response process validity, (5) translation and (6) evaluation of psychometric properties amongst 690 health workers in the five countries. Results: The tool was validated for use amongst physicians, nurse/midwives and community health workers. The six phases of development resulted in a good fit between the theoretical dimensions of the COACH tool and its psychometric properties. The tool has 49 items measuring eight aspects of context: Resources, Community engagement, Commitment to work, Informal payment, Leadership, Work culture, Monitoring services for action and Sources of knowledge. Conclusions: Aspects of organizational context that were identified as influencing the implementation of EBPs in high-income settings were also found to be relevant in LMICs. However, there were additional aspects of context of relevance in LMICs specifically Resources, Community engagement, Commitment to work and Informal payment. Use of the COACH tool will allow for systematic description of the local healthcare context prior implementing healthcare interventions to allow for tailoring implementation strategies or as part of the evaluation of implementing healthcare interventions and thus allow for deeper insights into the process of implementing EBPs in LMICs.
Resumo:
BACKGROUND: In northern Vietnam the Neonatal health - Knowledge Into Practice (NeoKIP, Current Controlled Trials ISRCTN44599712) trial has evaluated facilitation as a knowledge translation intervention to improve neonatal survival. The results demonstrated that intervention sites, each having an assigned group including local stakeholders supported by a facilitator, lowered the neonatal mortality rate by 50% during the last intervention year compared with control sites. This process evaluation was conducted to identify and describe mechanisms of the NeoKIP intervention based on experiences of facilitators and intervention group members. METHODS: Four focus group discussions (FGDs) were conducted with all facilitators at different occasions and 12 FGDs with 6 intervention groups at 2 occasions. Fifteen FGDs were audio recorded, transcribed verbatim, translated into English, and analysed using thematic analysis. RESULTS: Four themes and 17 sub-themes emerged from the 3 FGDs with facilitators, and 5 themes and 18 sub-themes were identified from the 12 FGDs with the intervention groups mirroring the process of, and the barriers to, the intervention. Facilitators and intervention group members concurred that having groups representing various organisations was beneficial. Facilitators were considered important in assembling the groups. The facilitators functioned best if coming from the same geographical area as the groups and if they were able to come to terms with the chair of the groups. However, the facilitators' lack of health knowledge was regarded as a deficit for assisting the groups' assignments. FGD participants experienced the NeoKIP intervention to have impact on the knowledge and behaviour of both intervention group members and the general public, however, they found that the intervention was a slow and time-consuming process. Perceived facilitation barriers were lack of money, inadequate support, and the function of the intervention groups. CONCLUSIONS: This qualitative process evaluation contributes to explain the improved neonatal survival and why this occurred after a latent period in the NeoKIP project. The used knowledge translation intervention, where facilitators supported multi-stakeholder coalitions with the mandate to impact upon attitudes and behaviour in the communes, has low costs and potential for being scaled-up within existing healthcare systems.
Resumo:
BACKGROUND: Whether the type of dietary fat could alter cardiometabolic responses to a hypercaloric diet is unknown. In addition, subclinical cardiometabolic consequences of moderate weight gain require further study. METHODS AND RESULTS: In a 7-week, double-blind, parallel-group, randomized controlled trial, 39 healthy, lean individuals (mean age of 27±4) consumed muffins (51% of energy [%E] from fat and 44%E refined carbohydrates) providing 750 kcal/day added to their habitual diets. All muffins had identical contents, except for type of fat; sunflower oil rich in polyunsaturated fatty acids (PUFA diet) or palm oil rich in saturated fatty acids (SFA diet). Despite comparable weight gain in the 2 groups, total: high-density lipoprotein (HDL) cholesterol, low-density lipoprotein:HDL cholesterol, and apolipoprotein B:AI ratios decreased during the PUFA versus the SFA diet (-0.37±0.59 versus +0.07±0.29, -0.31±0.49 versus +0.05±0.28, and -0.07±0.11 versus +0.01±0.07, P=0.003, P=0.007, and P=0.01 for between-group differences), whereas no significant differences were observed for other cardiometabolic risk markers. In the whole group (ie, independently of fat type), body weight increased (+2.2%, P<0.001) together with increased plasma proinsulin (+21%, P=0.007), insulin (+17%, P=0.003), proprotein convertase subtilisin/kexin type 9, (+9%, P=0.008) fibroblast growth factor-21 (+31%, P=0.04), endothelial markers vascular cell adhesion molecule-1, intercellular adhesion molecule-1, and E-selectin (+9, +5, and +10%, respectively, P<0.01 for all), whereas nonesterified fatty acids decreased (-28%, P=0.001). CONCLUSIONS: Excess energy from PUFA versus SFA reduces atherogenic lipoproteins. Modest weight gain in young individuals induces hyperproinsulinemia and increases biomarkers of endothelial dysfunction, effects that may be partly outweighed by the lipid-lowering effects of PUFA. CLINICAL TRIAL REGISTRATION URL: http://ClinicalTrials.gov. Unique identifier: NCT01427140.
Resumo:
Internationella tester av elevers kunskapsresultat har bidragit till att kraftigt öka intresset för hur elevers studieprestationer kan förbättras. En samstämmig forskning placerar lärares undervisning högt upp på listan av faktorer som är betydelsefulla för att förbättra elevers lärande. En metod som visat sig användbar för att utveckla lärares undervisningsförmåga är learning study som framför allt använts av lärare som undervisar elever i lägre åldrar. Vi visar i den här artikeln, med stöd av en fallstudie, att det även är möjligt att framgångsrikt använda learning study-metoden för att utveckla lärare i gymnasieskolans yrkesutbildning och deras förmåga att undervisa där ämnesinnehållet ofta avser tyst yrkeskunskap och icke-kognitiva förmågor.
Resumo:
The phenotypic effect of a gene is normally described by the mean-difference between alternative genotypes. A gene may, however, also influence the phenotype by causing a difference in variance between genotypes. Here, we reanalyze a publicly available Arabidopsis thaliana dataset [1] and show that genetic variance heterogeneity appears to be as common as normal additive effects on a genomewide scale. The study also develops theory to estimate the contributions of variance differences between genotypes to the phenotypic variance, and this is used to show that individual loci can explain more than 20% of the phenotypic variance. Two well-studied systems, cellular control of molybdenum level by the ion-transporter MOT1 and flowering-time regulation by the FRI-FLC expression network, and a novel association for Leaf serration are used to illustrate the contribution of major individual loci, expression pathways, and gene-by-environment interactions to the genetic variance heterogeneity.
Resumo:
A reciclagem de resíduos apresenta-se como uma alternativa adequada com relação à preservação dos recursos naturais e do meio ambiente. As escórias de aciaria são resíduos siderúrgicos originados na fabricação do aço, e são geradas em grandes quantidades. Estes resíduos são estocados nos pátios siderúrgicos, onde permanecem, na sua maioria, sem qualquer destino. Normalmente, as escórias de aciaria são volumetricamente instáveis, apresentando características expansivas, e por esta razão, a aplicação das mesmas em materiais de construção torna-se restrita. Esta pesquisa tem como objetivo estudar a viabilidade técnica do uso das escórias de aciaria LD como adição em cimentos, propondo um método de estabilização por meio de granulação por resfriamento brusco destas escórias, buscando, desta forma, a eliminação do fenômeno da expansão, e visando a melhoria das características destes resíduos. No processo de estabilização, a escória líquida foi granulada em uma usina siderúrgica. Estudos complementares de granulação foram realizados nos laboratórios da UFRGS, empregando-se escórias refundidas. A granulação por resfriamento brusco favoreceu a redução do CaOlivre, a eliminação do MgO na forma de periclásio, e a eliminação do bC2S das escórias, considerados agentes causadores da expansão. No entanto, a elevada basicidade da escória LD dificulta a formação da estrutura vítrea e a separação da fração metálica após o resfriamento brusco. Foram realizados ensaios de expansão das escórias, atividade pozolânica, e resistência mecânica de argamassas com escórias granuladas. O resfriamento brusco proporcionou a eliminação da expansão e o desenvolvimento das propriedades pozolânicas/cimentícias da escória granulada. Como adição em cimentos, do ponto de vista da resistência mecânica, as argamassas compostas com escórias granuladas e clínquer apresentaram níveis de resistência à compressão axial compatíveis com as especificações referentes ao cimento Portland composto, apesar destes resultados serem inferiores aos obtidos para as argamassas de referência.
As demonstrações financeiras em US GAAP tomadas como instrumento gerencial da CST: um estudo de caso
Resumo:
A finalidade desta pesquisa é avaliar as demonstrações financeiras da CST preparadas de acordo com os princípios contábeis geralmente aceitos nos Estados Unidos, como um instrumento de tomada de decisões, pela administração da CST, ao invés dos demonstrativos preparados de acordo com os princípios contábeis geralmente aceitos no Brasil. Como estudo de caso da CST, os seus relatórios financeiros, incluindo demonstrações financeiras, relatórios de administração, press release, e outros, relacionados ao periodo de 1994 a 2000, constituem a base desta pesquisa. As informações de tais documentos foram comparadas e analisadas. Também, foi necessário pesqUIsar sobre as principais regras contábeis do Brasil e dos Estados Unidos que afetam o resultado deste estudo. Alguns livros sobre contabilidade e finanças de ambos os paises, Brasil e Estados Unidos, foram também usados como uma base conceitual. A partir dos resultados obtidos foi possível conhecer a influência das diferenças de princípios contábeis e, aSSIm avaliar quaIs demonstrações contábeis, brasileiras ou amencanas, são mats consistentes para finalidades gerenCIatS, considerando as caracteristicas da CST.
Resumo:
Este trabalho apresenta o estudo da efetividade de barreiras de amortecimento para atenuar a vibração causada pela propagação de ondas sísmicas oriundas de detonações. A barreira consta de uma porção do terreno cujas características de propagação são modificadas artificialmente pela detonação de uma linha de furos com parâmetros idênticos aos dos furos de produção. Os resultados obtidos demonstram a efetividade deste recurso, evidenciado pelo coeficiente de redução entre os valores de vibração gerados em situações com e sem o uso de barreira (0,41) e também através da mudança dos coeficientes da equação de previsão via Distância Escalonada, possibilitando em escala de produção o aumento na carga máxima por tempo de retardo ( 4,9 % à 118,9% ), com redução de custos devido ao menor consumo de retardos por furo ( -5,7 % à - 40,7 % ).
Resumo:
Tissue engineering is an important branch of regenerative medicine that uses cells, materials (scaffolds), and suitable biochemical and physicochemical factors to improve or replace specific biological functions. In particular, the control of cell behavior (namely, of cell adhesion, proliferation and differentiation) is a key aspect for the design of successful therapeutical approaches. In this study, poly(lactic-co-glycolic acid) (PLGA) fiber mats were prepared using the electrospinning technology (the fiber diameters were in the micrometer range). Furthermore, the electrospun fiber mats thus formed were functionalized using the layer-by- layer (LbL) technique with chitosan and alginate (natural and biodegradable polyelectrolytes having opposite charges) as a mean for the immobilization of pDNA/dendrimer complexes. The polyelectrolyte multilayer deposition was confirmed by fluorescence spectroscopy using fluorescent-labeled polyelectrolytes. The electrospun fiber mats coated with chitosan and alginate were successfully loaded with complexes of pDNA and poly(amidoamine) (PAMAM) dendrimers (generation 5) and were able of releasing them in a controlled manner along time. In addition, these mats supported the adhesion and proliferation of NIH 3T3 cells and of human mesenchymal stem cells (hMSCs) in their surface. Transfection experiments using a pDNA encoding for luciferase showed the ability of the electrospun fiber mats to efficiently serve as gene delivery systems. When a pDNA encoding for bone morphogenetic protein-2 (BMP-2) was used, the osteoblastic differentiation of hMSCs cultured on the surface of the mats was promoted. Taken together, the results revealed that merging the electrospinning technique with the LbL technique, can be a suitable methodology for the creation of biological active matrices for bone tissue engineering.
Resumo:
Sleep helps the consolidation of declarative memories in the laboratory, but the pro-mnemonic effect of daytime naps in schools is yet to be fully characterized. While a few studies indicate that sleep can indeed benefit school learning, it remains unclear how best to use it. Here we set out to evaluate the influence of daytime naps on the duration of declarative memories learned in school by students of 10–15 years old. A total of 584 students from 6th grade were investigated. Students within a regular classroom were exposed to a 15-min lecture on new declarative contents, absent from the standard curriculum for this age group. The students were then randomly sorted into nap and non-nap groups. Students in the nap group were conducted to a quiet room with mats, received sleep masks and were invited to sleep. At the same time, students in the non-nap group attended regular school classes given by their usual teacher (Experiment I), or English classes given by another experimenter (Experiment II). These 2 versions of the study differed in a number of ways. In Experiment I (n = 371), students were pre-tested on lecture-related contents before the lecture, were invited to nap for up to 2 h, and after 1, 2, or 5 days received surprise tests with similar content but different wording and question order. In Experiment II (n = 213), students were invited to nap for up to 50 min (duration of a regular class); surprise tests were applied immediately after the lecture, and repeated after 5, 30, or 110 days. Experiment I showed a significant ∼10% gain in test scores for both nap and non-nap groups 1 day after learning, in comparison with pre-test scores. This gain was sustained in the nap group after 2 and 5 days, but in the non-nap group it decayed completely after 5 days. In Experiment II, the nap group showed significantly higher scores than the non-nap group at all times tested, thus precluding specific conclusions. The results suggest that sleep can be used to enhance the duration of memory contents learned in school.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Resumo:
Sisal is a renewable agricultural resource adapted to the hostile climatic and soil conditions particularly encountered in the semi-arid areas of the state of Rio Grande do Norte. Consequently, sisal has played a strategic role in the economy of the region, as one of few options of income available in the semi-arid. Find new options and adding value to products manufactured from sisal are goals that contribute not only to the scientific and technological development of the Northeastern region, but also to the increase of the family income for people that live in the semi-arid areas where sisal is grown. Lignocellulosic fibers are extracted from sisal and commonly used to produce both handcrafted and industrial goods including ropes, mats and carpets. Alternatively, addedvalue products can be made using sisal to produce alumina fibers (Al2O3) by biotemplating, which consists in the reproduction of the natural fiber-like structure of the starting material. The objective of this study was to evaluate the conditions necessary to convert sisal into alumina fibers by biotemplating. Alumina fibers were obtaining after pretreating sisal fibers and infiltrating them with a Al2Cl6 saturated solution, alumina sol from aluminum isopropoxide or aluminum gas. Heat-treating temperatures varied from 1200 ºC to 1650 °C. The resulting fibers were then characterized by X-ray diffraction and scanning electronic microscopy. Fibers obtained by liquid infiltration revealed conversion only of the surface of the fiber into α-Al2O3, which yielded limited resistance to handling. Gas infiltration resulted in stronger fibers with better reproduction of the inner structure of the original fiber. All converted fibers consisted of 100% α-Al2O3 suggesting a wide range of technological applications especially those that require thermal isolation
Resumo:
Leukemia is a heterogeneous group of hematologic malignancies that result from partial or total transformation of the blast cells. The Acute Lymphoblastic Leukemia (ALL) is the most common malignancy in childhood, especially in male, Caucasian children younger than 14 years. Several criteria are adopted to classify ALL, including the cell morphology, cytochemistry, immunophenotyping and cytogenetic analysis. Cytogenetic studies allow a more detailed analysis to detect chromosomal abnormalities of leukemic cells. These modifications will determine the diagnosis, classification, stage characterization, remission assessment and prognosis. In this study were evaluated 30 patients, aged from four months to seventeen years, of both sexes and various ethnicities. The age distribution showed that 67% of patients had between one and ten years (with mean age of XX years old), the most prevalent ethnic was Caucasian (50%) and 57% were males. According to immunophenotype, 93% of patients had B-cells progenitor ALL and 7% early lineage T. Considering the total studied population, the most frequent medical findings were lymphadenopathy (37%), hepatomegaly (77%) and splenomegaly (70%), where one patient could present more than one of these medical findings. Regarding the CBC, the majority of patients had hemoglobin below 10 g / dl (73%), leukocyte count less than 10.000/μL (60%) and platelet count below 150.000/μL (83%). Chromosomal abnormalities were observed in 64% of all patients, where hyperdiploidy was the most common numerical change (67%), followed by hypodiploid (33%). All these data are in agreement with the literature. Moreover, complexes structural and/or number changes not yet described in literature were observed, which indicated poor prognosis. Finally, we concluded that this study demonstrated the importance of cytogenetic study in the diagnosis and identification of prognostic factors in pediatric patients with ALL in Rio Grande do Norte. The results obtained in this study are extremely useful and emphasizes that surveys of this nature must be conducted more frequently in our state