A physico-chemical characterisation of particulate emissions from a compression ignition engine : the influence of biodiesel feedstock

This study undertook a physico-chemical characterisation of particle emissions from a single compression ignition engine operated at one test mode with 3 biodiesel fuels made from 3 different feedstocks (i.e. soy, tallow and canola) at 4 different blend percentages (20%, 40%, 60% and 80%) to gain insights into their particle-related health effects. Particle physical properties were inferred by measuring particle number size distributions both with and without heating within a thermodenuder (TD) and also by measuring particulate matter (PM) emission factors with an aerodynamic diameter less than 10 μm (PM10). The chemical properties of particulates were investigated by measuring particle and vapour phase Polycyclic Aromatic Hydrocarbons (PAHs) and also Reactive Oxygen Species (ROS) concentrations. The particle number size distributions showed strong dependency on feedstock and blend percentage with some fuel types showing increased particle number emissions, whilst others showed particle number reductions. In addition, the median particle diameter decreased as the blend percentage was increased. Particle and vapour phase PAHs were generally reduced with biodiesel, with the results being relatively independent of the blend percentage. The ROS concentrations increased monotonically with biodiesel blend percentage, but did not exhibit strong feedstock variability. Furthermore, the ROS concentrations correlated quite well with the organic volume percentage of particles – a quantity which increased with increasing blend percentage. At higher blend percentages, the particle surface area was significantly reduced, but the particles were internally mixed with a greater organic volume percentage (containing ROS) which has implications for using surface area as a regulatory metric for diesel particulate matter (DPM) emissions.

Utilizing industry-led innovation capacity to enhance supply chain performance : an empirical study

A fundamental principle of the resource-based (RBV) of the firm is that the basis for a competitive advantage lies primarily in the application of bundles of valuable strategic capabilities and resources at a firm’s or supply chain’s disposal. These capabilities enact research activities and outputs produced by industry funded R&D bodies. Such industry lead innovations are seen as strategic industry resources, because effective utilization of industry innovation capacity by sectors such as the Australian beef industry are critical, if productivity levels are to increase. Academics and practitioners often maintain that dynamic supply chains and innovation capacity are the mechanisms most likely to deliver performance improvements in national industries.. Yet many industries are still failing to capitalise on these strategic resources. In this research, we draw on the resource-based view (RBV) and embryonic research into strategic supply chain capabilities. We investigate how two strategic supply chain capabilities (supply chain performance differential capability and supply chain dynamic capability) influence industry-led innovation capacity utilization and provide superior performance enhancements to the supply chain. In addition, we examine the influence of size of the supply chain operative as a control variable. Results indicate that both small and large supply chain operatives in this industry believe these strategic capabilities influence and function as second-order latent variables of this strategic supply chain resource. Additionally respondents acknowledge size does impacts both the amount of influence these strategic capabilities have and the level of performance enhancement expected by supply chain operatives from utilizing industry-led innovation capacity. Results however also indicate contradiction in this industry and in relation to existing literature when it comes to utilizing such e-resources.

Application of multi-criteria decision making methods to compression ignition engine efficiency and gaseous, particulate and greenhouse gas emissions

Compression ignition (CI) engine design is subject to many constraints which presents a multi-criteria optimisation problem that the engine researcher must solve. In particular, the modern CI engine must not only be efficient, but must also deliver low gaseous, particulate and life cycle greenhouse gas emissions so that its impact on urban air quality, human health, and global warming are minimised. Consequently, this study undertakes a multi-criteria analysis which seeks to identify alternative fuels, injection technologies and combustion strategies that could potentially satisfy these CI engine design constraints. Three datasets are analysed with the Preference Ranking Organization Method for Enrichment Evaluations and Geometrical Analysis for Interactive Aid (PROMETHEE-GAIA) algorithm to explore the impact of 1): an ethanol fumigation system, 2): alternative fuels (20 % biodiesel and synthetic diesel) and alternative injection technologies (mechanical direct injection and common rail injection), and 3): various biodiesel fuels made from 3 feedstocks (i.e. soy, tallow, and canola) tested at several blend percentages (20-100 %) on the resulting emissions and efficiency profile of the various test engines. The results show that moderate ethanol substitutions (~20 % by energy) at moderate load, high percentage soy blends (60-100 %), and alternative fuels (biodiesel and synthetic diesel) provide an efficiency and emissions profile that yields the most “preferred” solutions to this multi-criteria engine design problem. Further research is, however, required to reduce Reactive Oxygen Species (ROS) emissions with alternative fuels, and to deliver technologies that do not significantly reduce the median diameter of particle emissions.

Adaptation and change in Queensland’s rangelands : cell grazing as an emerging ideology of pastoral-ecology

Does the current global political economic framework, or more specifically, the cost-price squeeze associated with primary production, restrict the choices of Australian cattle graziers in moving to more sustainable practices? It has often been argued by primary producers and academics, alike, that current terms of trade have resulted in reduced profitability at the property level, and as such, have made it difficult for landholders to shift to practices which are environmentally sustainable. Whilst there is mounting evidence that this is case, there is also evidence that some graziers have been able to adapt to the prevailing market conditions through an ideological as well as ‘practice’ shift. Findings from qualitative research in Central Queensland, Australia has highlighted how ‘cell grazing’ departs from the traditional or conventional aspects of grazing which can be described as productivist, to an approach closely approximating Lang and Heasman’s (2004) ‘ecologically integrated paradigm’. It is argued that cell grazing is, at present, a marginal activity that requires an ideological and cultural shift, as well as an investment in new infrastructure, however, current cell grazing activities may also demonstrate that beef grazing has the potential to be both economically and environmentally sustainable.

The Impacts of Climate Change on Australia’s Food Production and Export

The global food system is undergoing unprecedented change. With population increases, demands for food globally will continue to rise at the same time that agricultural environments are compromised through urban encroachment, climate change and environmental degradation. Australia has long identified itself as an agricultural exporting nation—but what will its capacity be in feeding an increasing global population as it also comes to terms with extreme climatic events such as the floods, fires and droughts, and reduced water availability, experienced in recent decades? This chapter traces the history of Australian agricultural exports and evaluates its food production and export capacity against scientific predictions of climate change impacts. With the federal government forecasting declines in the production of wheat, beef, dairy and sugar, Australia’s key export commodities may well be compromised. Calls to produce more food using new technologies are likely to generate significant environmental problems. Yet, a radical reconfiguration of Australian agriculture which incorporates alternative approaches, such as agro-ecology, is rarely considered by government and industry.

Let them eat steak : food preferences of patients in a tertiary public hospital

Information on foods patients like and dislike is the essential basis for planning menus which are acceptable to patients and promote adequate consumption. The aim of this study was to obtain quantitative data on the food preferences of inpatients at a large metropolitan public hospital for use in menu planning. Methodology was based on a study by Williams et al (1988), and included additional questions about appetite and taste changes. The survey used a 9 point hedonic scale to rate foods listed in random order and was modified to incorporate more contemporary foods than those used in the originalWilliams study. Surveys were conducted by final year University of Queensland dietetics students on Food Service Practicum at the Royal Brisbane and Women’s Hospital (929 beds) in 2012. The first survey (220 questions, n = 157) had a response rate of 61%. The second included more sandwich fillings and salads (231 questions, n = 219, response rate 67%). Total number surveyed was 376. Results showed the most preferred foods were roast potato, grilled steak, ice cream, fresh strawberries, roast lamb, roast beef, grapes and banana. The least preferred foods were grapefruit, soybeans, lentils, sardines, prune juice and grapefruit juice. Patients who reported taste changes (10%) had similar food preferences to those who didn’t report taste changes. Patients who reported poor/very poor appetite (10%) generally scored foods lower than those who reported OK (22%), good/very good appetite (65%). The results of this study informed planning for a new patient menu at the RBWH in December 2012.

The Escherichia coli O157:H7 EhaB autotransporter protein binds to laminin and collagen I and induces a serum IgA response in O157:H7 challenged cattle

Enterohaemorrhagic Escherichia coli (EHEC) are a subgroup of Shiga toxin-producing E. coli that cause gastrointestinal disease with the potential for life-threatening sequelae. Cattle serve as the natural reservoir for EHEC and outbreaks occur sporadically as a result of contaminated beef and other farming products. While certain EHEC virulence mechanisms have been extensively studied, the factors that mediate host colonization are poorly defined. Previously, we identified four proteins (EhaA,B,C,D) from the prototypic EHEC strain EDL933 that belong to the autotransporter (AT) family. Here we characterize the EhaB AT protein. EhaB was shown to be located at the cell surface and overexpression in E. coli K-12 resulted in significant biofilm formation under continuous flow conditions. Overexpression of EhaB in E. coli K12 and EDL933 backgrounds also promoted adhesion to the extracellular matrix proteins collagen I and laminin. An EhaB-specific antibody revealed that EhaB is expressed in E. coli EDL933 following in vitro growth. EhaB also cross-reacted with serum IgA from cattle challenged with E. coli O157:H7, indicating that EhaB is expressed in vivo and elicits a host IgA immune response.

Strategic supply chain management factors influencing agribusiness innovation utilization

Purpose – The purpose of this paper is to examine empirically, an industry development paradox, using embryonic literature in the area of strategic supply chain management, together with innovation management literature. This study seeks to understand how, forming strategic supply chain relationships, and developing strategic supply chain capability, influences beneficial supply chain outcomes expected from utilizing industry-led innovation, in the form of electronic business solutions using the internet, in the Australian beef industry. Findings should add valuable insights to both academics and practitioners in the fields of supply chain innovation management and strategic supply chain management, and expand knowledge to current literature. Design/methodology/approach – This is a quantitative study comparing innovative and non-innovative supply chain operatives in the Australian beef industry, through factor analysis and structural equation modeling using PAWS Statistical V18 and AMOS V18 to analyze survey data from 412 respondents from the Australian beef supply chain. Findings – Key findings are that both innovative and non-innovative supply chain operators attribute supply chain synchronization as only a minor indicator of strategic supply chain capability, contrary to the literature; and they also indicate strategic supply chain capability has a minor influence in achieving beneficial outcomes from utilizing industry-led innovation. These results suggest a lack of coordination between supply chain operatives in the industry. They also suggest a lack of understanding of the benefits of developing a strategic supply chain management competence, particularly in relation to innovation agendas, and provides valuable insights as to why an industry paradox exists in terms of the level of investment in industry-led innovation, vs the level of corresponding benefit achieved. Research limitations/implications – Results are not generalized due to the single agribusiness industry studied and the single research method employed. However, this provides opportunity for further agribusiness studies in this area and also studies using alternate methods, such as qualitative, in-depth analysis of these factors and their relationships, which may confirm results or produce different results. Further, this study empirically extends existing theoretical contributions and insights into the roles of strategic supply chain management and innovation management in improving supply chain and ultimately industry performance while providing practical insights to supply chain practitioners in this and other similar agribusiness industries. Practical implications – These findings confirm results from a 2007 research (Ketchen et al., 2007) which suggests supply chain practice and teachings need to take a strategic direction in the twenty-first century. To date, competence in supply chain management has built up from functional and process orientations rather than from a strategic perspective. This study confirms that there is a need for more generalists that can integrate with various disciplines, particularly those who can understand and implement strategic supply chain management. Social implications – Possible social implications accrue through the development of responsible government policy in terms of industry supply chains. Strategic supply chain management and supply chain innovation management have impacts to the social fabric of nations through the sustainability of their industries, especially agribusiness industries which deal with food safety and security. If supply chains are now the competitive weapon of nations then funding innovation and managing their supply chain competitiveness in global markets requires a strategic approach from everyone, not just the industry participants. Originality/value – This is original empirical research, seeking to add value to embryonic and important developing literature concerned with adopting a strategic approach to supply chain management. It also seeks to add to existing literature in the area of innovation management, particularly through greater understanding of the implications of nations developing industry-wide, industry-led innovation agendas, and their ramifications to industry supply chains.

Dietary intake in Australian children aged 4–24 months: Consumption of meat and meat alternatives

Meat/meat alternatives (M/MA) are key sources of Fe, Zn and protein, but intake tends to be low in young children. Australian recommendations state that Fe-rich foods, including M/MA, should be the first complementary foods offered to infants. The present paper reports M/MA consumption of Australian infants and toddlers, compares intake with guidelines, and suggests strategies to enhance adherence to those guidelines. Mother–infant dyads recruited as part of the NOURISH and South Australian Infants Dietary Intake studies provided 3 d of intake data at three time points: Time 1 (T1) (n 482, mean age 5·5 (SD 1·1) months), Time 2 (T2) (n 600, mean age 14·0 (SD 1·2) months) and Time 3 (T3) (n 533, mean age 24 (SD 0·7) months). Of 170 infants consuming solids and aged greater than 6 months at T1, 50 (29 %) consumed beef, lamb, veal (BLV) or pork on at least one of 3 d. Commercial infant foods containing BLV or poultry were the most common form of M/MA consumed at T1, whilst by T2 BLV mixed dishes (including pasta bolognaise) became more popular and remained so at T3. The processed M/MA increased in popularity over time, led by pork (including ham). The present study shows that M/MA are not being eaten by Australian infants or toddlers regularly enough; or in adequate quantities to meet recommendations; and that the form in which these foods are eaten can lead to smaller M/MA serve sizes and greater Na intake. Parents should be encouraged to offer M/MA in a recognisable form, as one of the first complementary foods, in order to increase acceptance at a later age.

Environmental health risk assessment of dioxin in foods at the two most severe dioxin hot spots in Vietnam

Background Bien Hoa and Da Nang airbases were bulk storages for Agent Orange during the Vietnam War and currently are the two most severe dioxin hot spots. Objectives This study assesses the health risk of exposure to dioxin through foods for local residents living in seven wards surrounding these airbases. Methods This study follows the Australian Environmental Health Risk Assessment Framework to assess the health risk of exposure to dioxin in foods. Forty-six pooled samples of commonly consumed local foods were collected and analyzed for dioxin/furans. A food frequency and Knowledge–Attitude–Practice survey was also undertaken at 1000 local households, various stakeholders were involved and related publications were reviewed. Results Total dioxin/furan concentrations in samples of local “high-risk” foods (e.g. free range chicken meat and eggs, ducks, freshwater fish, snail and beef) ranged from 3.8 pg TEQ/g to 95 pg TEQ/g, while in “low-risk” foods (e.g. caged chicken meat and eggs, seafoods, pork, leafy vegetables, fruits, and rice) concentrations ranged from 0.03 pg TEQ/g to 6.1 pg TEQ/g. Estimated daily intake of dioxin if people who did not consume local high risk foods ranged from 3.2 pg TEQ/kg bw/day to 6.2 pg TEQ/kg bw/day (Bien Hoa) and from 1.2 pg TEQ/kg bw/day to 4.3 pg TEQ/kg bw/day (Da Nang). Consumption of local high risk foods resulted in extremely high dioxin daily intakes (60.4–102.8 pg TEQ/kg bw/day in Bien Hoa; 27.0–148.0 pg TEQ/kg bw/day in Da Nang). Conclusions Consumption of local “high-risk” foods increases dioxin daily intakes far above the WHO recommended TDI (1–4 pg TEQ/kg bw/day). Practicing appropriate preventive measures is necessary to significantly reduce exposure and health risk.

The Expanding Live Cattle Trade in Northern Australian

The north Australian beef industry is complex and dynamic. It is strategically positioned to access new and existing export markets. To prosper in a global economy, it will require strong processing and live cattle sectors, continued rationalisation of infrastructure, uptake of appropriate technology, and the synergy obtained when industry sectors unite and cooperate to maintain market advantage. Strategies to address food safety, animal welfare, the environment and other consumer concerns must be delivered. Strategic alliances with quality assurance systems will develop. These alliances will be based on economies of scale and on vertical cooperation, rather than vertical integration. Industry sectors will need to increase their contribution to Research, Development and Extension. These contributions need to be global in outlook. Industry sectors should also be aware that change (positive or negative) in one sector will impact on other sectors. Feedback along the food chain is essential to maximise productivity and market share.

Reproductive Performance of Caprine Feral Does Mated to Boer or Feral Bucks in Semi-Arid Queensland

A strong world demand and current firm prices for goat meat provides opportunities for some wool/beef production enterprises in western Queensland to increase farm viability through diversification. In particular, there is rising interest in the use of Boer goats to improve productive performance of the Australian feral goat. Pastoral graziers have noted the high prolificacy of feral goats grazed in semi-arid areas, but there is no information on the breeding ability of feral does mated to Boer bucks. Animal production for a consuming world : proceedings of 9th Congress of the Asian-Australasian Association of Animal Production Societies [AAAP] and 23rd Biennial Conference of the Australian Society of Animal Production [ASAP] and 17th Annual Symposium of the University of Sydney, Dairy Research Foundation, [DRF]. 2-7 July 2000, Sydney, Australia.

Variation in liveweight gain of feedlot steers in southern Queensland

The rise in demand by domestic and export markets for a high quality uniform beef carcase has led to more steers being finished in feedlots. However, the profitability of feedlotting is small and economic survival hinges on efficiency (Ryan 1990). Lack of published data prevents conclusions being drawn about the level of efficiency of Australian feedlotting operations but the few studies reported show considerable variation in liveweight performance and carcase characteristics such as fat depth and marbling (Baud et al.) 21st Biennial Conference. 8-12 July, University of Queensland, Brisbane.

Comparison of growth rates of relocated and local steers

Beef producers have expressed concern that cattle moved from one location to another do not always perform as well as comparable local cattle. Research station records and field trial data were examined to determine the effect of relocation on growth rate using data sets for animals of different age and liveweight at relocation and of different genotypes. 21st Biennial Conference. 8-12 July University of Queensland, Brisbane.

Standardising bull breeding soundness evaluations and reporting in Australia

There is substantial variation in bull breeding soundness evaluation procedures and reports in Australia; the situation is compounded by difficulties in interpretation and the validity of many reports. In an effort to overcome this, the scientific literature was reviewed [Fordyce G. In: Fordyce G, editor. Bull fertility: selection and management in Australia. Eight Mile Plains, Australia: Australian Cattle Vets; 2002] and the needs of stakeholders were considered in preparing a manual, Evaluating and Reporting Bull Fertility [Entwistle KW, Fordyce G. Evaluating and reporting bull fertility. Eight Mile Plains, Australia: Australian Cattle Vets; 2003.] that outlined standards for assessing and reporting bull breeding soundness. A new recording and reporting system, called Bull Reporter, is based on standards from this manual and groups bull fertility traits into five summary categories: Scrotum, Physical, Crush-side Semen, Sperm Morphology, and Serving. The client will generally select which categories they wish to have included in the evaluation to suit their specific purposes. While there is adequate room for comments, the veterinarian is not required to make an overall judgment of whether the bull has normal capacity to sire calves under natural mating management, but ensures the standards for each selected category are met. Professional, standardised, easy-to-read reports are produced either electronically [Entwistle KW, Fordyce G. Evaluating and reporting bull fertility. Eight Mile Plains, Australia: Australian Cattle Vets; 2003.] or manually. A bull owner or their agent signs the certificate to affirm that bulls have not undergone procedures to rectify faults which may have otherwise caused them to fail the standards. An accreditation system for assessing sperm morphology was established because of its demonstrated relationship with pregnancy rates and because of the difficulties in achieving consistent and accurate assessments among laboratories. It is considered that Bull Reporter is applicable to beef and dairy bulls across all levels of management, genotypes and environments throughout Australia, with substantial potential for application elsewhere in the world.