Gestão de resíduos sólidos domiciliares orgânicos: práticas e técnicas para a destinação final na cidade de Rio Claro - SP

The present work is the analysis of the practices and techniques currently used in the final allocation given to organic household solid waste in the city of Rio Claro - SP. As the major part of Rio Claro’s household solid waste is formed by the organic fraction, as well as in the rest of the country, this research proposes a study on what is done with that portion of the waste, its treatment and where finally destined, based on the National Solid Waste Politic, recently approved in 2010. With the use of this organic part, for example: as animal feed supplement or compost embodiment for the purpose of producing organic fertilizer, enables the decrease of the percentage of the total destined to dumps and landfills. This total percentage has already been reduced after the popularization of the beneficial recycling programs in Brazil, which are still growing. As cities and the purchasing power of its individuals grow, there is also a consequent growth of waste production by society. The household whether domestic solid waste are lower than Industrial Solid ( RSI ) waste for the production in million tons ( Mton ) quantities , however, those residues are more visible on a daily basis - in cities and periphery as well, due to the inadequate management, - and also offer , as well as industrial and agricultural wastes , several types of harmful effects to the population when managed incorrectly. Therefore, the research aims to assist in the study of Solid Waste Management (MSW) for efficient Urban and Environmental Planning in a midsize city. Thus, this project aims to analyze in the city of Rio Claro, how the allocation of these materials is done and whether these practices denote effective improvement regarding the proper management of waste, in the same way that the recycling chain would allow this effect

Avaliação dos resíduos sólidos gerados no Restaurante Universitário da UNESP de Rio Claro: uma análise do potencial de compostagem

A consequence of population growth is the increased generation of solid waste, which requires environmentally and economically viable suitable disposal sites. The scarcity of such sites makes necessary to adopt non-generation measures, reduction, reuse , recycling and treatment of solid waste before final disposal of waste. This paper presents the quantification and qualification of organic waste generated in each sector of the University Restaurant (UR) , by proposing indicators of waste generation per meal (index of waste) . Then, from the characterization of the waste management practices adopted internally, evaluates the potential deployment of the composting process for organic waste, with signaling for opportunities to improve waste management. The diagnosis of waste generation was made based on data collected during the period of 10 days. The waste were classified into 3 groups (organic, recyclable and waste) in each sector of the restaurant ( pre preparation , kitchen and tray return) . The results reveal that 33 % of the waste generated in the UR currently has the potential to be composted in a suitable place on campus. Every meal served generat approximately 124g of waste, of which 35g are organic waste of the pre preparation sector, 49g are remnants of food in the tray’s return and 40g are other kinds of waste, including recyclable and non recyclable. You can still get a higher percentage of compostable if the trays pre-wash is not performed with detergent and water. To minimize the generation of waste trays can be replaced by plates and skimmers and ladles can be replaced by smaller ones. The food exposed in the counter but not consumed, can be distributed to students after the restaurant is closed so this material would not be disposed in the garbage

Melhorias na linha de planificadora contínua com o uso de transporte por sucção e enrolador de refiles

With the market more and more disputed and negotiations where the customer is the main factor who decides whether the companies have conditions or not to dispute the market, industries must search improvements in products and processes targeting lower costs and better quality. With that in mind, this work will study the actual situation of a line of Tension Leveler, after cold mill process, for aluminum coil, and search new technologies, precisely the Scrap Baller machine, which will raise the quality level and the line’s productivity. It will be analyzed the justifications (reasons) for these new technologies, the history, the involved concepts, the operation, functions, the material that will be tension leveled, the limitations and tech and economic viability in comparison with the actual system. Also it will be taken a brief about the aluminum coil production in Brazil, especially the ones which destiny is aluminum beverage can, and the recycling process, that is very well done in Brazil, worldwide leader in aluminum recycling

Análise cinemática e cinética do salto vertical de crianças com transtorno do desenvolvimento da coordenação (TDC)

Due to motor difficulties, children with developmental coordination disorder (DCD) doesn't feel motivated to do physical activities, sometimes resulting in a decline of their physical fitness, but it isn't really known for sure the reasons that induct children with DCD to low performances in physical fitness tests, because a lot of tasks that are part of the battery of tests of physical performance are complex in the coordination and/or motor control point of view, like the vertical jump for example. Therefore, the objective of this study was to investigate the factors that induct children with DCD to low performances in physical fitness tests, especially in the vertical jump task. For that, cinematic (duration of the eccentrical phase, duration of the concentrical phase, shift of the mass center and velocity of the mass center), kinetic (potency peak and force peak) and vertical jump performance analysis in two conditions (with the use of arms and without it) were realized in a force platform. The results indicated that children with DCD show a lower performance compared to their peers with typical development (TD), due to a lower potency production

Construindo arte: uma escola de artes e artesanato, o social e o ecológico

O trabalho tem como objetivo principal a criação de uma Escola de Artes e Artesanato, que está ligada ao sistema de incubadoras de cooperativas. O foco é projetar um edifício que atenda ao programa da escola e principalmente que tenha parte de sua estrutura construída de maneira artesanal e que seja sustentável. O projeto visa à formação de uma mão de obra qualificada para o mercado de artes e artesanato. Além disso, busca a reciclagem e a sustentabilidade na construção da obra e a inclusão social através dos sistemas de incubadoras de algumas universidades do Estado de São Paulo, incluindo o da Universidade na qual será inserida. A Escola será projetada dentro da Universidade de São Paulo, no Campus Butantã. Além da formação em várias áreas do campo das artes o estudante seria preparado para atuar dentro de uma economia solidária, ou seja, estudaria as formas de aplicar o que aprendeu ao longo dos cursos para poder aplicá-lo em um sistema coletivo para um ganho igualitário e de formação pessoal. Tem como idéia de público alvo agregar a sociedade acadêmica, já existente, com pessoas de diferentes classes e formações, mas com o mesmo intuito. Será a primeira escola que formará profissionais com alta especialização na área do artesanato ligada ao cooperativismo

Plano de gerenciamento sustentável dos resíduos de construção civil. O caso de Rio Claro (SP)

The current problematic of the construction and demolition (C&D) waste faced for the Brazilian cities, is one of the main degradation factors of the environment, over all about the promise of the urban ambient quality. This scenery must mainly to the unsustainable management adopted by the great majority of the Brazilian cities. Therefore, this work aims at to offer subsidies for medium cities, having as study object the city of Rio Claro-SP, (Brazil), in the elaboration of plans and integrated programs of sustainable management of the construction and demolition waste, in accordance with CONAMA Resolution nº 307/2002, that’s set up a sustainable management system of C&D waste. In this direction, the diagnosis of the management was elaborated for the city of Rio Claro, (generation, collects, transport and disposal) and the public administration of the construction and demolition waste, as well as of the study of the related aspects with C&D waste recycling plant. Later, was suggested a plan of improvements for the public manager of C&D waste: areas of temporary disposal to facility the appropriating destination, appropriated areas of final disposal, incentives to the recycling of C&D waste, new legislations, education and orientation programs and adequacy the agents of C&D waste management (generating, transporting, addressee and public manager), directing for an environmental, economic and social sustainability.

Preparação e caracterização da casca de banana prata particulada para aplicação com reforço em compósito de matriz de PEAD

The waste, exaggerated and incorrect disposal of biomass are common practices in modern times where everything is disposable. However the growing concern with the nature and the environment compel man to give nobler destinations for these products through sustainability and recycling of waste. Banana peel is a residual biomass, which is not consumed. It generates tons of waste per week in São Paulo city. This trash is disposed in dumps and landfills, which could be reduced by using it as reinforcement in natural composites. The high density polyethylene (HDPE) is a polymer derived from the ethylene polymerization and is easily recycled. Which makes it a sustainable material. In the present work characteristics of the natural composite composed with banana peel and high-density polyethylene were studied. It was noted that removing the lignin present in the banana peel, the fiber introduces a significant improvement in thermal resistance. The preparation of composite was made with a ratio of 5% and 10% of reinforcement in comparison with polymeric matrix mass. Composites were thermally, mechanically and microscopically characterized. The addition of fiber in the polymer increased the mechanical strength of the composite. The fiber surface treatment with distilled water removed the amorphous material present in the fibers, improving significantly thermal stability and increasing crystallinity of the celullose. The addition of 5% fiber in mass to the polymer increased significantly the tensile strength and elasticity modulus for the composite. With 10% of fiber addiction there were also an improvement when compared with pure HDPE, but when compared with 5% composite the mechanical properties are slightly lower. This may be due to the fiber particle size, which are small and eventually become a hub of tension ... (Complete abstract click electronic access below)

O ensino da compostagem e produção de sabão como forma de gerenciamento dos resíduos sólidos domiciliares

Introdução: O adequado gerenciamento dos resíduos sólidos domiciliares (RSD) tem se estabelecido nas últimas décadas como um importante instrumento na diminuição do lixo doméstico destinados aos aterros. A compostagem doméstica e a produção de sabão a partir de óleo usado são alternativas para a reciclagem dos RSD que, ao contrário dos lixos recicláveis, não são explorados comercialmente. Assim, o ensino dessas técnicas para a comunidade pode ser uma ferramenta útil na educação ambiental, disseminando práticas que evitam a destinação final de resíduos sólidos em aterros e desenvolvendo valores para a sustentabilidade. Objetivos: Ensinar formas de reciclagem dos RSD através de técnicas de compostagem e produção de sabão a partir de óleo usado, servindo também como instrumento para promover a educação ambiental, e conscientizar a comunidade sobre a importância de um adequado gerenciamento de resíduos. Métodos: As atividades de ensino consistiram em duas partes, unindo teoria e prática, por meio da apresentação de painéis explicativos sobre compostagem, produção de sabão, e sobre as vantagens decorrentes desses processos seguida da realização das técnicas apresentadas, com a produção de sabão em barra e líquido com óleo usado, e pela montagem de pequenas composteiras em garrafões PET de 5 litros de água mineral reaproveitados. Resultados: As atividades foram realizadas em eventos abertos a sociedade de São José do Rio Preto, tais como a Semana da Tecnologia, em outubro de 2010 e a Semana do Meio Ambiente, em junho de 2011, ambas desenvolvidas no SESC (Serviço Social do Comércio) da cidade. O público foi variado, incluindo desde aposentados e donas de casa até estudantes e profissionais de diversos setores. O interesse em anotar as metodologias explicadas culminou na idéia de produzir um material impresso que contivesse as receitas de sabão (líquido e em barra), os procedimentos e dicas de como realizar a compostagem. A convite de uma escola pública, houve também a apresentação das atividades para pais de alunos e funcionários interessados em aprender as práticas para o adequado gerenciamento dos RSD, levando à discussão das possibilidades de implantação de um projeto de compostagem na própria escola.

Estudo da influência da adição de resíduos de óleo em concretos para aplicação em pavimentos

Pós-graduação em Engenharia Civil - FEIS

Gestão de resíduos sólidos urbanos: contribuições socioambientais de duas cooperativas de catadores de materiais recicláveis na região do Médio Paranapanema

Pós-graduação em Biociências - FCLAS

Equipamento para realização de ensaios de tração confinada e aquecida em geossintéticos

Pós-graduação em Engenharia Civil - FEIS

Educação e economia solidária: contribuições da pedagogia da alternância para a formação dos catadores de materiais recicláveis

This text presents the Pedagogy of Alternating methodology, highlighting its contribution to re-think the formation of catadores of recycling materials (rubbish collectors). Whereas the use of this approach in the urban area is unusual, the goal of the article is to initiate a debate to promote further elaborations. Initially an overview of the Pedagogy of Alternating is presented and the main instruments used in this approach are commented. Two theoretical and methodological issues are indicated as challenges for catadores formation: the relations between Education and Work and the relations between Theory and Practice. The need to overcome dichotomy between these dimensions of human activity (that predominates in today's society) is defended. The catadores work reveals the exclusion of these workers of less organized sectors of production chains, with few opportunities to obtain better income and qualification. Overcome this gap requires an intense training to turn the catadores in recycling workers . To reach this goal the implementation of Alternating experiences between study and work in cooperatives and schools is not enough. A deep transformation is needed over the ways and subjects of both study and work, in order to create emancipating activities that promotes a full development of these workers.

Avaliação de cenários para a gestão dos resíduos domiciliares na região norte do Vale do Paraíba/SP

Pós-graduação em Engenharia de Produção - FEB

Gestão de resíduos sólidos no município de Tibagi - PR: desempenho da coleta seletiva

The objective of this study was to analyze the performance of solid waste management in the municipality of Tibagi, Paraná, a city with approximately 20000 inhabitants, which implemented the selective collection program called Recycle Tibagi. The analysis was based on descriptive statistical techniques, considering the three types of waste (tailings, organic and recyclable), and per capita generation of garbage upward trend in the coming years, based on the method of Winter (Triple Exponential Damping), using data recorded by the Department of the Environment and the Association of Recyclable Materials from Tibagi - ACAMARTI. Efficient selective collection from a structured environmental education program with constant training conducted with the scavengers, possible to obtain important data in sorting and marketing of recyclable materials, saving raw materials, water and energy, as well as relevant indicators social inclusion and employment generation and income. The project involves several areas of municipal management and arouses curiosity and interest in several areas: social, financial, environmental and administrative. It's a way to encourage new projects and public bodies, highlighting the importance of recycling and proper disposal of solid waste.

Oportunidades e desafios para lidar com as barreiras à adoção de práticas de green supply chain management: guidelines à luz de um estudo de múltiplos casos no Brasil

This article aims to discuss how leading companies of the automotive battery industry installed in Brazil are dealing with barriers to the adoption of green supply chain management (GSCM) practices. From these discussions, we list the opportunities and challenges to the automotive battery sector in incorporating GSCM actions. We conducted a multiple-case study with the top five companies in this sector. The highlight factors are “organizational values” and “human resources” for internal barriers, and “suppliers” and “consumers” for external barriers.