Linking physiological and architectural models of cotton

Despite the strong influence of plant architecture on crop yield, most crop models either ignore it or deal with it in a very rudimentary way. This paper demonstrates the feasibility of linking a model that simulates the morphogenesis and resultant architecture of individual cotton plants with a crop model that simulates the effects of environmental factors on critical physiological processes and resulting yield in cotton. First the varietal parameters of the models were made concordant. Then routines were developed to allocate the flower buds produced each day by the crop model amongst the potential positions generated by the architectural model. This allocation is done according to a set of heuristic rules. The final weight of individual bolls and the shedding of buds and fruit caused by water, N, and C stresses are processed in a similar manner. Observations of the positions of harvestable fruits, both within and between plants, made under a variety of agronomic conditions that had resulted in a broad range of plant architectures were compared to those predicted by the model with the same environmental inputs. As illustrated by comparisons of plant maps, the linked models performed reasonably well, though performance of the fruiting point allocation and shedding algorithms could probably be improved by further analysis of the spatial relationships of retained fruit. (C) 2002 Elsevier Science Ltd. All rights reserved.

Knowledge-based system on optimum design of liquid retaining structures with genetic algorithms

This paper delineates the development of a prototype hybrid knowledge-based system for the optimum design of liquid retaining structures by coupling the blackboard architecture, an expert system shell VISUAL RULE STUDIO and genetic algorithm (GA). Through custom-built interactive graphical user interfaces under a user-friendly environment, the user is directed throughout the design process, which includes preliminary design, load specification, model generation, finite element analysis, code compliance checking, and member sizing optimization. For structural optimization, GA is applied to the minimum cost design of structural systems with discrete reinforced concrete sections. The design of a typical example of the liquid retaining structure is illustrated. The results demonstrate extraordinarily converging speed as near-optimal solutions are acquired after merely exploration of a small portion of the search space. This system can act as a consultant to assist novice designers in the design of liquid retaining structures.

A coupled knowledge-based expert system for design of liquid-retaining structures

This paper describes a coupled knowledge-based system (KBS) for the design of liquid-retaining structures, which can handle both the symbolic knowledge processing based on engineering heuristics in the preliminary synthesis stage and the extensive numerical crunching involved in the detailed analysis stage. The prototype system is developed by employing blackboard architecture and a commercial shell VISUAL RULE STUDIO. Its present scope covers design of three types of liquid-retaining structures, namely, a rectangular shape with one compartment, a rectangular shape with two compartments and a circular shape. Through custom-built interactive graphical user interfaces, the user is directed throughout the design process, which includes preliminary design, load specification, model generation, finite element analysis, code compliance checking and member sizing optimization. It is also integrated with various relational databases that provide the system with sectional properties, moment and shear coefficients and final member details. This system can act as a consultant to assist novice designers in the design of liquid-retaining structures with increase in efficiency and optimization of design output and automated record keeping. The design of a typical example of the liquid-retaining structure is also illustrated. (C) 2003 Elsevier B.V All rights reserved.

Multilayer transverse gradient coil design

In small, cylindrical gradient coils consisting of a single layer of wires, the limiting factor in achieving large magnetic field gradients is the rapid increase in coil resistance with efficiency. This behavior results from the decrease in the maximum usable wire diameter as the number of turns is increased. By adopting a multilayer design in which the coil wires are allowed to spread out into multiple layers wound at increasing radii, a more favorable scaling of resistance with efficiency is achieved, thus allowing the design of more powerful gradient coils with acceptable resistance values. By extending the theory used to design standard cylindrical gradient coils, mathematical expressions have been developed that allow the design of multilayer coils. These expressions have previously been applied to the design of a four-layer z-gradient coil. As a further development, the equations have now been modified to allow the design of multilayer transverse gradient coils. The variation in coil performance with the number of layers employed has been investigated for coils of a size suitable for use in NMR microscopy, and the effect of constructing the coil using wires or cuts in a continuous conducting surface has also been assessed. We find that at fixed resistance a small wire-wound two-layer coil offers an increase in efficiency of a factor of about 1.5 compared with a single-layer coil. In addition, a two-layer coil of 10-mm inner diameter has been designed and built. This coil had an efficiency of 0.41 Tm-1 A(-1), a resistance of 0.96 +/- 0.01 Omega, and an inductance of 22.3 +/- 0.2 muH. The coil produces a gradient that deviates from linearity by less than 5% over a central cylindrical region of interest of height and length 6.2 mm. (C) 2003 Wiley Periodicals, Inc.

Balancing the number and size of sites: An economic approach to the optimal design of cluster samples

The design of randomized controlled trials entails decisions that have economic as well as statistical implications. In particular, the choice of an individual or cluster randomization design may affect the cost of achieving the desired level of power, other things being equal. Furthermore, if cluster randomization is chosen, the researcher must decide how to balance the number of clusters, or sites, and the size of each site. This article investigates these interrelated statistical and economic issues. Its principal purpose is to elucidate the statistical and economic trade-offs to assist researchers to employ randomized controlled trials that have desired economic, as well as statistical, properties. (C) 2003 Elsevier Inc. All rights reserved.

Effect of lifter design on drying performance in rotary dryers

Lifter use in dryers improves mass transfer by increasing the amount of surface area available for transfer and also by increasing the velocity of gas over the particle surface. An even cross-sectional distribution of particles in a dryer improves the efficiency of operation by ensuring that evaporation from falling particles is taking place for the maximum fraction of the rotation period of the drier. Studies on lifter design to improve the cross-sectional particle distribution were performed on angled lifters. A single lifter was used and the mass-transfer rate examined as a function of angular lifter displacement. Analysis of the mass transfer characteristics of single lifters allowed performance comparisons and recommendations for lifter design.

Design gráfico : análise da relação com a performance da micro e pequena empresa

O design possui um papel central nos negócios, participando de forma crucial no intercambio cultural e econômico da sociedade. Uma das competências do profissional de design gráfico é o desenvolvimento da Identidade Visual Corporativa (IVC). Ela tem como função definir visualmente o perfil de uma empresa, configurando-se, assim, como um composto mercadológico de fundamental importância para diferenciação das organizações, possuindo um importante papel para o crescimento das micro e pequenas empresas (MPEs). O objetivo desta pesquisa é verificar de que forma os gestores de MPEs percebem a atuação do design gráfico sobre a performance do seu negócio, avaliada a partir da sua experiência com a IVC desenvolvida por um profissional de design e aplicada pela empresa em suas atividades. A pesquisa é aplicada, em relação a sua finalidade, e exploratória, quanto ao seu objetivo. Sua condução se deu a partir de pesquisa bibliográfica, entrevista semiestruturada com os gestores das MPEs investigadas e pesquisa documental em materiais fornecidos pelos sujeitos da pesquisa, realizando-se, desta forma, uma triangulação metodológica a fim de contribuir para o exame do fenômeno. Como estratégia de investigação foi utilizado o estudo de casos múltiplos, realizado com 7 (sete) MPEs que haviam incorporado sua IVC há pelo menos 2 (dois) anos, dos setores de comércio e serviço, localizadas nos municípios de Vitória, Vila Velha, Serra ou Cariacica. Os dados coletados foram analisados por meio da Análise de Conteúdo, com base nas etapas descritas por Bardin (1977) e Laville (1999), distribuindo as unidades de análise (frases e parágrafos) nas categorias desenvolvidas: Motivação, Integração da IVC, Gestão da IVC, Relevância da IVC, IVC e Performance e Expressão Visual. A análise utilizou a abordagem quantitativa, realizada por meio da técnica de percentagem, e qualitativa, com maior ênfase na última, onde foram analisadas as categorias e seus elementos, assim como as relações entre elas, buscando extrair os significados construídos. Desta forma, foi possível verificar que a maior parte dos gestores das MPEs investigadas identificam que o design gráfico, por meio da IVC, contribui de forma positiva para a performance do seu negócio, proporcionando diferentes tipos de benefícios, dentre os mais citados foram: Identificação/Reconhecimento, Fortalecimento (solidez, estabilidade, profissionalismo), Novos Clientes, Imagem, Receptividade, Agregação de Valor para a Marca e Diferenciação.

Design gráfico : análise da relação com a performance da micro e pequena empresa

O design possui um papel central nos negócios, participando de forma crucial no intercambio cultural e econômico da sociedade. Uma das competências do profissional de design gráfico é o desenvolvimento da Identidade Visual Corporativa (IVC). Ela tem como função definir visualmente o perfil de uma empresa, configurando-se, assim, como um composto mercadológico de fundamental importância para diferenciação das organizações, possuindo um importante papel para o crescimento das micro e pequenas empresas (MPEs). O objetivo desta pesquisa é verificar de que forma os gestores de MPEs percebem a atuação do design gráfico sobre a performance do seu negócio, avaliada a partir da sua experiência com a IVC desenvolvida por um profissional de design e aplicada pela empresa em suas atividades. A pesquisa é aplicada, em relação a sua finalidade, e exploratória, quanto ao seu objetivo. Sua condução se deu a partir de pesquisa bibliográfica, entrevista semiestruturada com os gestores das MPEs investigadas e pesquisa documental em materiais fornecidos pelos sujeitos da pesquisa, realizando-se, desta forma, uma triangulação metodológica a fim de contribuir para o exame do fenômeno. Como estratégia de investigação foi utilizado o estudo de casos múltiplos, realizado com 7 (sete) MPEs que haviam incorporado sua IVC há pelo menos 2 (dois) anos, dos setores de comércio e serviço, localizadas nos municípios de Vitória, Vila Velha, Serra ou Cariacica. Os dados coletados foram analisados por meio da Análise de Conteúdo, com base nas etapas descritas por Bardin (1977) e Laville (1999), distribuindo as unidades de análise (frases e parágrafos) nas categorias desenvolvidas: Motivação, Integração da IVC, Gestão da IVC, Relevância da IVC, IVC e Performance e Expressão Visual. A análise utilizou a abordagem quantitativa, realizada por meio da técnica de percentagem, e qualitativa, com maior ênfase na última, onde foram analisadas as categorias e seus elementos, assim como as relações entre elas, buscando extrair os significados construídos. Desta forma, foi possível verificar que a maior parte dos gestores das MPEs investigadas identificam que o design gráfico, por meio da IVC, contribui de forma positiva para a performance do seu negócio, proporcionando diferentes tipos de benefícios, dentre os mais citados foram: Identificação/Reconhecimento, Fortalecimento (solidez, estabilidade, profissionalismo), Novos Clientes, Imagem, Receptividade, Agregação de Valor para a Marca e Diferenciação.