Salmon stocks and fisheries in England and Wales, 2001. Preliminary assessment prepared for ICES, April 2002

This report presents a preliminary assessment of the state of salmon stocks and fisheries in England and Wales in 2001 to assist ICES in providing scientific advice to NASCO and to provide early feedback to fishery managers and anglers. The chief indicators of the state o f salmon stocks are normally the catches taken by rod and net fisheries. However, in 2001 angling was affected by the outbreak of foot and mouth disease (FMD), which restricted angling opportunities and access to rod fisheries in many parts of the country for lengthy periods. It is impossible to quantify the impact that FMD had on rod catches, although these were undoubtedly significantly reduced; net fisheries were unaffected by FMD. The declared salmon catch for 2001 (including those fish released alive by anglers) is provisionally estimated at 209 tonnes, representing some 57,000 fish, and comprising 153 tonnes (-43,000 fish) by nets and fixed engines and 56 tonnes (-14,000 fish) by rods. For direct comparison with previous years, it should be noted that the declared catch prior to the issue of a second reminder was about 49 tonnes (see below). An estimated 26 tonnes (43%) of the rod catch was released alive. These figures do not take account of catches of salmon which go unreported (including those taken illegally), and it is estimated that there may have been a total of 33 tonnes of additional fish caught in 2001; approximately 15% of all fish killed.

Comparative fishing experiments with two trawl designs used in the inshore waters off Kakinada (Andhra Pradesh)

The importance of small trawlers for the economic exploitation of the inshore demersal fisheries is well recognized and accordingly mechanized boats of sizes 30' and 32' fitted with engines of h.p. ranging from 30 to 45 came into existence particularly at Kakinada. The need to work out the most suitable trawling gear for these classes of boats becomes imperative and as an appurtenance to this, comparative fishing experiments were attempted with different trawls. In the present communication certain observations made on the relative catch efficiency of two different trawl nets used in combination with two different shaped otter boards are given.

Effects of rotating inlet distortion on multistage compressor stability

In multi-spool engines, rotating stall in an upstream compressor will impose a rotating distortion on the downstream compressor, thereby affecting its stability margin. In this paper experiments are described in which this effect was simulated by a rotating screen upstream of several multistage low-speed compressors. The measurements are complemented by, and compared with, a theoretical model of multistage compressor response to speed and direction of rotation of an inlet distortion. For co-rotating distortions (i.e., distortions rotating in the same direction as rotor rotation), experiments show that the compressors exhibited significant loss in stability margin and that they could be divided into two groups according to their response. The first group exhibited a single peak in stall margin degradation when the distortion speed corresponded to roughly 50% of rotor speed. The second group showed two peaks in stall margin degradation corresponding to distortion speeds of approximately 25-35% and 70-75% of rotor speed. These new results demonstrate that multistage compressors can have more than a single resonant response. Detailed measurements suggest that the two types of behavior are linked to differences between the stall inception processes observed for the two groups of compressors and that a direct connection thus exists between the observed forced response and the unsteady flow phenomena at stall onset. For counter-rotational distortions, all the compressors tested showed minimal loss of stability margin. The results imply that counter-rotation of the fan and core compressor, or LP and HP compressors, could be a worthwhile design choice. Calculations based on the two-dimensional theoretical model show excellent agreement for the compressors which had a single peak for stall margin degradation. We take this first-of-a-kind comparison as showing that the model, though simplified, captures the essential fluid dynamic features of the phenomena. Agreement is not good for compressors which had two peaks in the curve of stall margin shift versus distortion rotation speed. The discrepancy is attributed to the three-dimensional and short length scale nature of the stall inception process in these machines; this includes phenomena that have not yet been addressed in any model.

Lake Victoria Region (East) Annual Report 1976

The fishing industry on Lake Victoria continued to provide a wide spectrum of activities to a variety of people principally the fishermen and the fish mongers, boat builders,fishnets and associated equipment manufacturer transporters on land and water and finally the consumers of the end product the fish. Though there were such varied activities in the industry the year under review, as in previous other recent years, was difficult one being, characterized by continued shortages of fishing gear and accessories, spare parts for the outboard engines, timber for boat building, nails, paints and generally high prices of those items when ever found. Thus this total sum the activities of the fishing industry on Lake victoria was rather slack as compared to those of precious year.

A new, fast response CO2 sensor

The inability of emissions reduction methods to meet upcoming legislation without an unacceptable increase in vehicle cost is a major problem of automobile manufacturer. This work aims to develop a cost-effective reduction of automobile emissions. A prototype CO2 sensor with 5 msec response time was built and bench tested, then used on an engine. The sensor design was based on standard emissions measurement technology using non-dispersive IR absorption. An improved sensor has now been completed with significant improvements in terms of signal to noise ratio and long-term stability. The improved sensor will be used to measure CO2 concentrations on three different engines. The results will then be used to validate engine and catalyst models and to propose control strategies aimed at reducing overall emissions. A brief description of the sensor itself was presented. Original is an abstract.

Spoken document representations for probabilistic retrieval

This paper presents some developments in query expansion and document representation of our spoken document retrieval system and shows how various retrieval techniques affect performance for different sets of transcriptions derived from a common speech source. Modifications of the document representation are used, which combine several techniques for query expansion, knowledge-based on one hand and statistics-based on the other. Taken together, these techniques can improve Average Precision by over 19% relative to a system similar to that which we presented at TREC-7. These new experiments have also confirmed that the degradation of Average Precision due to a word error rate (WER) of 25% is quite small (3.7% relative) and can be reduced to almost zero (0.2% relative). The overall improvement of the retrieval system can also be observed for seven different sets of transcriptions from different recognition engines with a WER ranging from 24.8% to 61.5%. We hope to repeat these experiments when larger document collections become available, in order to evaluate the scalability of these techniques.

Axial compressor response to inlet flow distortions by a CFD analysis

The usual approach to compressor design considers uniform inlet flow characteristics. Especially in aircraft applications, the inlet flow is quite often non uniform, and this can result in severe performance degradation. The magnitude of this phenomenon is amplified in military engines due to the complexity of inlet duct configurations and the extreme flight conditions. CFD simulation is an innovative and powerful tool for studying inlet distortions and can bring this inside the very early phases of the design process. This project attempts to study the effects of inlet flow distortions in an axial flow compressor trying to minimize the use computer resources and computational time. The first stage of a low bypass ratio compressor has been analyzed and its clean and distorted performance compared outlining the principal changes due to uneven flow distribution: drop in mass flow, increase in pressure and temperature ratios, decrease in surge margin. Three different studies have then been conducted to better understand the effects of the level, the type and the frequency of the distortion.

Selected trace metal concentration in bottom water and sediments of Kyoga basin lakes, and its potential to aquatic pollution

Although other research studies on areas such as the physical-chemical, nutrients and phytoplankton status of Lake Kyoga systems have been given a lot of attention (e.g. Mungoma 1988 and NaFIRRI 2006), efforts to determine the pollution status of this system, especially by heavy metals as one of the worldwide emerging environmental problems, is still limited. Many trace metals are regarded as serious pollutants of aquatic ecosystems because of their persistence, toxicity and ability to be incorporated into food chains (Mwamburi J., and Nathan O.F., 1997). Given the rapid human population growth and the associated economic activities both within the rural and urban areas in Uganda, such fish production systems are becoming very prone to various kinds of pollution including that by heavy metals. Anthropogenic factors such deforestation, use of chemicals and dumping of metallic products, spillages of fuels from outboard engines and many others and or natural processes involving atmospheric deposition by wind or rain, surface run-offs and streams flows from the catchment introduces heavy metals into the lake environment,.

A review of the fisheries of the Uganda waters of Lake Albert East Africa, 1928-1965/66, with catch data mainly from 1953

An historical account is given of the development of the Lake Albert fisheries since Worthington's survey in 1928. It is noted that the development of the fisheries was related to, and dependent upon, improvements in the type of gear and canoes, an incFease in the number of canoes and outboard engines in use, improved marketing facilities and better road communications. Summarized data, collected mainly since 1954, has been analysed and tabulated to show annual exports to the Congo, total annual catches 'and annual catches of individual species. A change in the relative abundance of the various species in the annual catches is described. It is noted that this change was caused by a change-over from large to small mesh size gill-nets, and that it was associated with an increased demand within Uganda for the smaller species of fish, such as Aleste's baremose and Hydrocynus forskahlii. A brief description of fish processing and marketing in the Lake Albert region is given, which emphasizes the suitability of salt-cured fish to the social and physical environment of the area. Finally, a summary of a recent survey of the potential fish resources of the lake is given in the discussion, and estimates of the 1965 catch at the north and south ends of the lake are compared with the findings of the survey. This showed that there is little danger of overfishing the Alestes baremose stocks of the Wanseko area at the 1965 rate of exploitation of the species, and that the total catch for 1965 at the south end of the lake was well below the estimated annual sustainable yield from the area.

National report of the frame survey 2006 in the Ugandan part of Lake Victoria

Fisheries Frame surveys have been carried out on Lake Victoria biannually since 2000 to determine· the number of fishers, fish landing sites, facilities at the landing sites. Information on the composition fishing crafts, their mode of propulsion, fishing gears and the fish species they target is also collected. This information is used to guide development and management of the lake's fisheries. The results of the four surveys carried out since 2000 show that the number of landing sites has decreased by 24% from 597 in 2000 to 481 in 2006, mainly as result of reorganisation of landing sites into Beach Management Units (BMUs). The fish landing sites continue to have inadequate facilities to service the fisheries industry e.g. in the 2006 survey only 11.2% of landing sites had fish shades; <0.6% had cold rooms; 3.5% had electricity; and only 35.5% had toilet facilities. Similarly, only 11.4% of landing sites had portable water; 2.5% had jetties, 3.7% had 'fish stores; and 36% were accessible by all weather roads. There is need to improve facilities servicing fisheries at landing sites, with major emphasis on sanitary facilities, especially toilets and portable water. The BMUs should be sensitised to prioritise the construction and utilisation of public toilet facilities at their respective landing sites. The ultimate aim should be to have public toilets at all fish landing sites. The trend of the various indicators of fishing effort has continued upwards: The total number of fishers increased by 43.5% from 37,721 in 2004 to 54,148 in 2006 and the number of fishing crafts increased (43.9%) from 16,775 in 2004 to 24,148 in 2006 over the same period. The total number of gillnets increased by 28.6% from 458,597 in 2004 to 589,777 in 2006 and the number of long line hooks increased by 136% from 968,848 to 2,285,609. The number of fishing crafts using outboard engines also increased from 3,173 in 2004 to 5,047 in 2006 suggesting that more fishers were going far in search of fish. There is still a large number of illegal gears especially beach seines, which increased by 58.8% from 954 in 2004 to 1420 in 2006. Efforts to remove these very destructive gears should be stepped up. There was also larger increase in number of illegal gillnets <5 inch mesh size. These increased by 63% from 56,246 in 2004 to 91,740 in 2006 compared with 23.8% increase of gillnets ~5 inch mesh size. There were also large increases in the numbers of gillnets of 5 and 5% inch mesh size, which increased by 48% and 130% from 2004 to 2006 implying a trend towards use of smaller gillnet mesh sizes. The number of traps which are used in shallow vegetated areas, flood plains and river mouths to target tilapiines and riverine species decreased drastically from 5,361 traps in 2004 to only 499 traps in 2006, a decrease of 974%, a phenomenon attributed to the receding water levels which have left the shallow vegetated areas dry. A total of 17,475 fishing crafts, 72% of all fishing crafts, in the Ugandan part of the lake are still using paddles and the. number of parachute crafts is also still very high, (Le. 5,064) comprising a high proportion (21 %) of the total number of fishing. There is need to promote the use of large fishing crafts with sails or a combination of sail and outboard motor. The Mukene fishery in the Ugandan waters of Lake Victoria has remained underdeveloped with only 9% of all fishing crafts operating in this fishery. Also less than 2% of fishing crafts with sails or motor operate in this fishery which implies that it is limited to near shore waters. Effort should be made to develop this fishery as it appears to have high potential, especially in deep offshore waters which are hardly fished.

Status of the gill net fishery for the small pelagic fish species in western, south-western and southern coastal waters of Sri Lanka during 1995-1997

Small pelagic fish species are mainly caught by gill nets operated by fibre reinforced plastic boats fitted with 8-25hp out board engines, traditional crafts fitted with 8-1hp out board engines and non mechanised traditional crafts. Around 28 to 55% of the small pelagic catch in the study area consisted of trenched sardine Amblygaster sirm during 1995-1997 period. Another 26-36% of the catch composed of other Sardinella species such as Sardinella gibbosa, S. albella, S. sindensis and S. longiceps. Engraulids such as Encrasicholina heteroloba, Stolephorus insularis and Stolephorus indicus and Thryssa spp formed around 3-5% of the catch. The major component of this fishery consisted of Clupeids and Engrauhds and over 65 species ranged between smaller Engraulids to incidental rock fish, sail fish, seer fish, sharks, skates and rays. Around 1.4 to 1.9% of the catch consisted of Chirocentrus dorab, Sphyraenaspp, Scomberomorus spp, Lepturcanthus sp and Megalaspis cordyla. Around 1-11% of the catch consisted of incidentally catches of sharks, rays, skates and sail fish. Another 1.6 to 6% of the catch consisted of Selar crumenophthalamus and Rastrelliger kanagurta. The best fishing season appeared to be from June to October in the west coast and August to December in the south coast. The major components of Amblygaster sirm, Sardinella albella and Sardinella gibbosa were caught within the size ranges of 10.0-22.5 cm, 11.0-13.0 cm and 11.0-15.0 cm respectively. However, smaller sized fish of above species of sizes between 6.9 cm to 9.7 cm total length were incidentally caught in the gill nets operated for small Engraulids with a stretched mesh size of 1.6cm. The overall catch rate for the major fish landing centre at Negombo indicated an increase from 38.5 kg/boat trip during 1984-1990 period to 49.5 kg/boat trip during 1995-1997 period. The catch rate for the dominant species Amblygaster sirm has decreased from 28.17 kg/boat trip during 1983-1990 period to 17.47 kg/boat trip during 1995-1997 period at Negombo. The paper also discusses the changing overall catch rates, change in species abundance and possible management consequences that should be considered.

Analysis of in-cylinder hydrocarbons in a multi-cylinder gasoline HCCI engine using gas chromatography

Gasoline Homogeneous Charge Compression Ignition (HCCI) combustion has been studied widely in the past decade. However, in HCCI engines using negative valve overlap (NVO), there is still uncertainty as to whether the effect of pilot injection during NVO on the start of combustion is primarily due to heat release of the pilot fuel during NVO or whether it is due to pilot fuel reformation. This paper presents data taken on a 4-cylinder gasoline direct injection, spark ignition/HCCI engine with a dual cam system, capable of recompressing residual gas. Engine in-cylinder samples are extracted at various points during the engine cycle through a high-speed sampling system and directly analysed with a gas chromatograph and flame ionisation detector. Engine parameter sweeps are performed for different pilot injection timings and quantities at a medium load point. Results show that for lean engine running conditions, earlier pilot injection timing leads to partial oxidation of the injected pilot fuel during NVO, while the fraction of light hydrocarbons remains constant for all parameter variations investigated. The same applies for a variation in pilot fuel amount. Thus there is evidence that in lean conditions, pilot injection-related NVO effects are dominated by heat release rather than fuel reformation. © 2009 SAE International.