Pressure Perturbation Calorimetry and Guest-Host Chemistry of NDMG and N-MAP with p-Sulfonatocalix[6]arene

The aim of this project is to provide an explanation for recently obtained binding constants for two similar guest molecules, NDMG and N-MAP, with a p-sulfonatocalix[6]arene host in ammonium acetate buffer. This work was done primarily using pressure perturbation calorimetry, which is a technique that determines the coefficient of thermal expansion, α, which is in turn related to the solute molecule's effect on the order of the surrounding water molecules. A series of experiments were designed to test the effects of suspected confounding variables on the validity of PPC data. PPC was then used to study NDMG and N-MAP in ammonium acetate buffer. NDMG exhibited a minimum in α as function of temperature, while N-MAP did not. This difference was theorized to be due to the formation of an intramolecular hydrogen bond in monocationic NDMG that would lower the heat capacity of the molecule and better distribute the molecule's charge. Computational work and nuclear magnetic resonance spectroscopy confirmed that monocationic, ring-closed NDMG has less concentrated charge and more constrained motion than monocationic, ring-open NDMG. This evidence supports the theory that monocationic NDMG forms an intramolecular hydrogen bond and that this may be responsible for the minimum in α. This difference may explain the differences in binding constants between NDMG and N-MAP.

Detailed Map and Recreational Suitability Assessment of the Colby Trail System

This map is designed as a resource for students and the public to use and develop a better understanding of the trails system on the Colby Campus. I used a Garmin GPSmap 60CS to chart all the trails on Runnals Hill and in the Arboretum. Then, using ArcGIS, I compiled the tracked trails and laid them over an aerial photo of the campus. Because many of the trails are hard to find, I took digital photos of each trail entry to help the user locate them. Then, by taking note of the grade and width of the trail, I decided which trails were suitable for certain activities. This gives users an idea of where to go for walking, running, mountain biking, cross-country skiing, and snowshoeing.

February 2011: National Broadband Map

http://digitalcommons.winthrop.edu/dacusdocsnews/1050/thumbnail.jpg

Sistema eletro-eletrônico para medição direta de torque em dispositivos girantes utilizando extensômetros de resistência elétrica

Neste trabalho propõe-se um sistema para medição de torque em dispositivos girantes, que utiliza extensômetros de resistência elétrica colados nos próprios elementos constituintes do arranjo mecânico sob análise. Um conjunto de circuitos eletrônicos foi especialmente desenvolvido para o sensoreamento das pequenas deformações que ocorrem nos disposotivos girantes. O sistema opera sem contato eletro-mecânico entre a parte estacionária e a parte girante. Para tanto desenvolveu-se também uma metodologia de projeto e construção de transformadores rotativos que são utilizados para transferência da energia que alimenta os circuitos eletrônicos solidários ao elemento mecânico instrumentado. Também foi necessário utilizar um transmissor em freqüência modulada do sinal elétrico proporcional ao torque medido. Uma análise comparativa, dos resultados obtidos entre os sistemas existentes e aqueles alcançados com a técnica proposta neste trabalho, demonstra sua aplicabilidade em diversas situações práticas.

Influência da adaptação funcional nas relações torque-ângulo e torque-velocidade

O objetivo do presente estudo foi comparar as relações torque-ângulo (T-A) e torque-velocidade (T-V) de bailarinas clássicas (n=14) e atletas de voleibol (n=22). O torque máximo (Tmax) da musculatura flexora plantar (FP) do tornozelo foi avaliada durante contrações isométricas voluntárias máximas nos ângulos de -10°, 0°, 10°, 20°, 30°, 40° e 50° de FP, e durante contrações isocinéticas voluntárias máximas nas velocidades angulares de 60°/s, 120°/s, 180°/s, 240°/s, 300°/s, 360°/s e 420°/s. Além do Tmax, o torque produzido nos ângulos articulares de -10° (T-10°), 10° (T10°) e 30° (T30°) também foi avaliado nas mesmas velocidades angulares. A ativação elétrica dos músculos gastrocnêmio medial (GM) e sóleo (SOL) direitos de cada indivíduo foi monitorada com eletrodos de eletromiografia (EMG) de superfície em configuração bipolar. Uma relação linear foi observada entre o Tmax e o aumento dos ângulos de FP nas atletas de voleibol Um deslocamento dessa relação em direção a maiores ângulos de FP (menores comprimentos musculares) ocorreu no grupo das bailarinas, com o aparecimento de um platô em menores ângulos de FP (maiores comprimentos musculares). Durante as contrações isocinéticas, uma relação hiperbólica foi observada entre o Tmax, T-10° e T10° com o aumento da velocidade angular nos dois grupos. Entretanto, em T30° as atletas de voleibol produziram valores superiores de torque nas velocidades angulares mais elevadas. Os valores root mean square (RMS) dos músculos GM e SOL foram mais elevados nas bailarinas que nas atletas de voleibol, tanto nas contrações isométricas quanto nas isocinéticas. Uma diminuição na ativação do GM e do SOL ocorreu com a diminuição da FP nas atletas de voleibol, enquanto os valores RMS se mantiveram estáveis para as bailarinas ao longo de todos os ângulos testados. Os resultados apresentados nesse estudo suportam a hipótese de que a atividade física sistemática provoca alteração nas propriedades intrínsecas musculares e ativação muscular, modificando assim, as relações T-A e T-V.

Controle de força e torque isométrico em crianças com e sem desordem coordenativa desenvolvimental

Esta tese teve como objetivos investigar: (1) as mudanças relacionadas à idade no controle de força e torque isométrico em crianças de diferentes idades em três tarefas manipulativas distintas, e (2) as diferenças no controle de força e torque isométrico, assim como nas respostas neuromusculares, entre crianças com e sem DCD de idade relacionadas em três tarefas manipulativas distintas. Neste sentido, foi realizado um ensaio teórico sobre a criança com Desordem Coordenativa Desenvolvimental (DCD), além de dois estudos experimentais que têm em comum a análise da estrutura da resposta do sistema motor em relação à performance das crianças com e sem DCD, em três tarefas manipulativas distintas de controle de força e torque isométrico, contínuo e constante. No primeiro estudo, foram investigadas as mudanças desenvolvimentais no controle motor usando um delineamento transversal de pesquisa com crianças de 7, 9 e 11 anos de idade, as quais foram incentivadas a manter o controle de força e torque durante vinte segundos nas tarefas de pressão digital, preensão digital em pinça e torque em preensão digital. Os resultados demonstraram que a performance melhorou com o avanço da idade, devido à capacidade do sistema sensório-motor apresentar uma resposta mais irregular e com um perfil de freqüências mais distribuídas. No segundo estudo, o controle de força e torque entre crianças com e sem DCD, com nove anos de idade, foram investigadas. Os participantes realizaram as mesmas tarefas do estudo desenvolvimental e, além disso, respostas neuromusculares foram mapeadas Os resultados não revelaram uma variabilidade maior e irregularidade menor no grupo com DCD nas tarefas de pressão digital e preensão digital em pinça. No entanto, na tarefa de controle de torque em preensão digital, foi identificada uma maior variabilidade e menor irregularidade na resposta motora do grupo com DCD. Os resultados não revelaram uma variabilidade maior e irregularidade menor no grupo com DCD nas tarefas de pressão digital e preensão digital em pinça. No entanto, na tarefa de controle de torque em preensão digital, foi identificada uma maior variabilidade e menor irregularidade na resposta motora do grupo com DCD. Os resultados da análise das respostas neuromusculares sugerem o uso de estratégias distintas entre os grupos, todavia, tais achados não foram conclusivos.

Fucana ativa via das Map quinases e inibe a proliferação de células de ovário de hamster chinês (CHO)

Fucan is a term used to denominate L-fucose rich sulfated polysaccharides. The fucans have been studied due their pharmacological activities like antithrombotic, antiproliferative and antioxidant. We have extracted three fucan fractions from the brown seaweed Spatoglossum schröederi. These fucans were denominated Fuc B 1, Fuc B 1.5 and Fuc B 2. The chemical analyzes show that the fucans have very similar composition as demonstrated by agarose electrophoresis gel, sugar and sulfate content. The antiproliferative effect was determined by MTT and BrdU methodologies in CHO cells. The inhibition of proliferation effect of the three fractions was about 40%. Therefore this we proceed just with the Fuc B 2 due the higher yield. There is no apoptosis indication using the anexin V/propidium iodide test. We found a cell cycle phase G1 arrest. The western blotting show that the PKC; pFAK; pERK 1/2 are activated when the cells were treated with fucans. The treatement with inhibitor of MAPK PD98059 extinguished the fucan effect. These results indicates that fucan act by the ERK pathway inducing the cell death.

Desenvolvimento e avaliação de padrão de torque para calibração de torquímetros em três faixas de medição

The continuous development of instruments and equipment used as tools or torque measurement in the industry is demanding more accurate techniques in the use of this kind instrumentation, including development of metrological characteristics in torque measurement. The same happens with the needs in calibration services. There is a diversity of methods of hand torque tools in the market with different measuring range but without complaining with technical standards in terms of requirements of quality and reliability. However, actually there is no choice of a torque measuring standard that fulfils, with low cost, the needs for the calibration of hand torque tools in a large number of ranges. The objective of this thesis is to show the development and evaluation of a torque measuring standard device with a conception to allow the calibration of hand torque tools with three levels of torque with an single instrument, promoting reduction of costs and time in the calibration, also offering reliability for the evaluation of torque measuring instrument. To attend the demand in the calibration of hand torque tools it is necessary that the calibration laboratories have a big collection of torque measuring standards, to fulfills the needs of the costumer, what is very costly. The development of this type of torque measuring standard revealed a viable technique and economically making possible the calibration of hand torque tools in different nominal ranges through a single measurement system versatile, efficient and of easy operation

Correlação entre torque, equlíbrio e função do joelho após reconstrução do LCA

Background: Several studies emphasize the importance of assessing the knee function after anterior cruciate ligament (ACL) reconstruction. The influence of several variables on the function of these patients has been analyzed, but there is no consensus in the science literature. Purpose: To evaluate the correlation between the torque and balance on the knee function after ACL reconstruction. Methods: 23 males patients with ACL reconstruction were tested. The procedures of the study included analysis of concentric peak torque at 60o/s and 180o/s of quadriceps femoris and hamstring muscle with a isokinetic dynamometer. The balance in single-limb stance was measured with stabilometry. The functional performance were performed by two hop tests. To estimate the subjective function of the patients was applied Lysholm Knee Scoring Scale and a Global Rating scale. Results: The analysis of data showed a moderate positive correlation between knee extensor torque and functional performance tests (r= 0,48; p=0,02). A moderate negative correlation was found between the two variables of the stabilometry center of pressure and average speed of centre of pressure and the Global Rating scale (r = -0.4, p = 0,04 and r = -0,49, p = 0 ,02, respectively). No correlation was found between peak torque and balance in single-limb stance. Conclusion: The results of the present study suggest that knee extensor strength and postural balance have some influence on knee function in patients after ACL reconstruction

Efeito de três tecnicas de alongamento muscular sobre o torque e atividade eletromiográfica

PURPOSE: To examine the acute effects caused by three techniques for stretching the hamstrings muscle on the active concentric peak torque (PT), passive PT and electromyographic activity (EMG). METHODS: Sixty volunteers (mean ± SD age, 22.6 ± 3 years), height 1.64 ± 0.07m and body weight of 58 ± 8.6kg, were randomly allocated into 4 groups of 15 subjects: Control Group (CG) - 5 minutes at rest, Static Stretching Group (SG) - 2 x 30s; Hold-Relax Group (HRG) - 3 x 6s of isometric contraction of hamstrings interspersed by 10s of hamstrings stretching and agonist Hold-Relax Group (AHRG) - 3 x 6s of isometric contraction of the quadriceps interspersed by 10s of hamstrings stretching. Evaluation has been conducted preand post-intervention, which verified the active concentric PT, passive PT EMG activity of IT. The statistical inference was performed by testing intra and inter, significance level at 5%. RESULTS: After intervention, there was a reduction in passive PT on CG, accompanied by a reduction of EMG activity, and an increase in passive PT on SG and AHRG. There was no change in the active concentric PT, or change in EMG activity. CG showed an increase in angle of the PT active, while the other groups showed no change. CONCLUSION: The results suggest that the shortterm stretching: 1) causes acute increase in passive torque, since the muscle does not perform sub-maximal contraction, 2) does not change in electromyographic activity and active torque, ind ependent of the technique

Neural network based estimation of torque in induction motors for real-time applications

Induction motors are largely used in several industry sectors. The selection of an induction motor has still been inaccurate because in most of the cases the load behavior in its shaft is completely unknown. The proposal of this article is to use artificial neural networks for torque estimation with the purpose of best selecting the induction motors rather than conventional methods, which use classical identification techniques and mechanical load modeling. Since proposed approach estimates the torque behavior from the transient to the steady state, one of its main contributions is the potential to also be implemented in control schemes for real-time applications. Simulation results are also presented to validate the proposed approach.

Spacecraft's attitude prediction: solar radiation torque and the Earth's shadow

A semi-analytical approach is proposed to study the rotational motion of an artificial satellite, under the influence of torque due to the solar radiation pressure, and taking into account the influence of Earth's shadow. Using Andoyer variables the equations for the rotational motion are presented in extended Hamiltonian form. In order to get a solution for the state variables close to an actual motion, the considered model for the shadow function takes into account physical and geometric factors and three specific regions: shadow, penumbra and full light. A mapping for the shadow function is proposed and a semi-analytical process is applied. When the satellite is totally illuminated or it is inside the penumbra, a known analytical solution is used to compute the satellite's attitude. A numerical simulation shows, when the penumbra region is included, the attenuation of the rotational motion during the transition from the shadow to the illuminate region and vice versa. (c) 2005 Published by Elsevier Ltd on behalf of COSPAR.

Analytical attitude prediction of spin stabilized spacecrafts perturbed by magnetic residual torque

An analytical approach for spin-stabilized spacecraft attitude prediction is presented for the influence of the residual magnetic torques. Assuming an inclined dipole model for the Earth's magnetic field, an analytical averaging method is applied to obtain the mean residual torque every orbital period. The orbit mean anomaly is utilized to compute the average components of residual torque in the spacecraft body frame reference system. The theory is developed for time variations in the orbital elements, and non-circular orbits, giving rise to many curvature integrals. It is observed that the residual magnetic torque does not have component along the spin axis. The inclusion of this torque on the rotational motion differential equations of a spin stabilized spacecraft yields conditions to derive an analytical solution. The solution shows that residual torque does not affect the spin velocity magnitude, contributing only for the precession and the drift of the spin axis of the spacecraft. (c) 2005 COSPAR. Published by Elsevier Ltd. All rights reserved.

Attitude stability of artificial satellites subject to gravity gradient torque

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Torque, myoeletric sygnal and heart rate responses during concentric and eccentric exercises in older men

Background: The literature reports that the eccentric muscular action produces greater force and lower myoelectric activity than the concentric muscular action, while the heart rate (HR) responses are bigger during concentric contraction. Objectives: To investigate the maximum average torque (MAT), surface electromyographic (SEMG) and the heart rate (HR) responses during different types of muscular contraction and angular velocities in older men. Methods: Twelve healthy men (61.7 +/- 1.6years) performed concentric (C) and eccentric (E) isokinetic knee extension-flexion at 60 degrees/s and 120 degrees/s. SEMG activity was recorded from vastus lateralis muscle and normalized by Root Mean Square-RMS (mu V) of maximal isometric knee extension at 60 degrees. HR (beats/min) and was recorded at rest and throughout each contraction. The data were analyzed by the Friedman test for repeated measures with post hoc Dunn's test (p<0.05). Results: The median values of MAT (N.m/kg) was smaller and the RMS (mu V) was larger during concentric contraction (C60 degrees/s=2.80 and 0.99; C120 degrees/s=2.46 and 1.0) than eccentric (E60 degrees/s=3.94 and 0.85; E120 degrees/s=4.08 and 0.89), respectively. The HR variation was similar in the four conditions studied. Conclusion: The magnitude of MAT and RMS responses in older men were dependent of the nature of the muscular action and independent of the angular velocity, whereas HR response was not influenced by these factors.