Factores afectivos e desempenho cognitivo na aprendizagem linguística

Neste trabalho foram cumpridos dois estudos intencionalmente diferenciados para avaliar factores afectivos e desempenho cognitivo no contexto de comportamento verbal em Língua segunda. No primeiro estudo foram descritos, analisados e discutidos os resultados que confirmam a influência da motivação, ansiedade e estilos de aprendizagem, em condição de aquisição de nova língua e de adaptação à cultura dominante. Essa influência é discutida na relação com variados factores e atendendo à diferenciação do valor de predição de cada um dos factores mencionados. A associação do factor idade ao factor cultural revelou-se a principal fonte diferenciadora das autoavaliações observadas. No segundo estudo, com a aplicação da bateria de testes em formato electrónico, foi possível averiguar os resultados e discutir as suas implicações ao nível do desempenho dos sujeitos, corroborando e refutando pressupostos teóricos de modelos que versam nesta área de estudo. O desempenho observado tem sérias implicações na reflexão pedagógica e práctica escolar, uma vez que, de forma geral, os sujeitos mais novos exibiram um desempenho medíocre quando comparado com a performance muito positiva dos participantes mais velhos, gerando conflito em relação aos pressupostos práticos implicados na teoria do período sensível para desenvolvimento de linguagem. Por outro lado, as duas amostras (nativos e imigrantes) revelam desempenhos muito próximos o que não destaca, como seria de esperar, o grupo nativo que deveria evidenciar vantagem devido ao conhecimento mais elevado relativamente ao léxico e gramática do Português, como Língua Materna. A relação entre motivação favorável, fraco índice de ansiedade linguística, e bom desempenho cognitivo não se revela linear e taxativa e devem ser revistos os princípios de modelos teóricos que advogam a consonância clássica entre determinados factores afectivos (motivação e estilos de aprendizagem) e cognitivos, no contexto da competência e performance verbais. Considerando os materiais desenvolvidos e observando os resultados obtidos, este estudo viabiliza o acesso a uma nova oportunidade de avaliação, em estilo de diagnose, dirigida aos alunos aprendentes de Português Língua Segunda, com experiência migratória.

Ecotoxicological tests using Chironomus riparius

Os sistemas aquáticos naturais podem estar sujeitos frequentemente a entrada de tóxicos, quer seja através da lixiviação dos campos agrícolas ou da descarga por parte de unidades industriais. Avaliar o impacto potencial destes contaminantes nos sistemas aquáticos é muito importante, porque pode promover consequências sérias no balanço ecológico dos ecossistemas. Os efeitos de níveis sub-letais destes tóxicos nas populações aquáticas são detectados, em muitos casos, somente após diversas gerações, dependendo da espécie e do contaminante. O comportamento animal é considerado como sendo a primeira linha de defesa perante estímulos ambientais, e pode ser uma representação de alterações fisiológicas no organismo, sendo portanto um indicador excelente de alterações ambientais. O desenvolvimento dos sistemas de aviso prévio que integram parâmetros comportamentais pode ajudar a prever mais rapidamente possíveis alterações ao nível das populações naturais, do que a utilização de testes ecotoxicológicos padrão com a mesma finalidade. O conhecimento acerca de possíveis implicações devido a alterações comportamentais, em organismos bentónicos e em populações do campo sujeitas a tóxicos, é ainda escasso. Sabendo isto, neste estudo pretendeu-se investigar como o comportamento de Chironomus riparius – usando um biomonitor em tempo real – e outros parâmetros tais como crescimento, emergência de adultos, bioacumulação e biomarcadores, são afectados pela exposição a imidacloprid e ao mercúrio, que foram seleccionados como contaminantes. Os resultados demonstraram que a exposição às concentrações sub-letais de imidacloprid afecta o crescimento e o comportamento dos quironomídeos e que estes organismos podem recuperar de uma exposição curta ao insecticida. O comportamento que corresponde à ventilação de C. riparius revelou-se como um parâmetro mais sensível do que a locomoção e do que as respostas bioquímicas, quando as larvas foram sujeitas ao imidacloprid. Larvas de C. riparius expostas a concentrações sub-letais de mercúrio apresentaram uma tendência de diminuição de actividade comportamental, em testes com concentrações crescentes do tóxico; o crescimento das larvas foi também prejudicado, e as taxas de emergência de adultos e o tempo de desenvolvimento apresentaram retardamento. Estes organismos podem bioacumular rapidamente o mercúrio em condições de não alimentação e apresentam uma lenta depuração deste metal. Estes efeitos podem, em último caso, conduzir a prováveis repercussões ao nível da população e das comunidades. As reduções em actividades comportamentais, mesmo em concentrações baixas, podem diminuir a quantidade de tempo gasta na procura de alimento, produzindo efeitos aos níveis morfo-fisiológicos, e assim afectar severamente o desempenho dos quironomídeos no ambiente. O uso destes factores comportamentais como um parâmetro ecotoxicológico sub-letal relevante ao nível da toxicologia aumentará a versatilidade dos testes, permitindo uma resposta comportamental mensurável e quantitativa ao nível do organismo, utilizando uma avaliação não destrutiva, e assim certificando que esta aproximação pode ser usada em testes ecotoxicológicos futuros.

Habilidades sociais, bem-estar psicológico e rendimento escolar

O propósito do presente estudo foi o de examinar o impacto da implementação de um programa de desenvolvimento de habilidades sociais no bem-estar psicológico (BEP) e no rendimento escolar numa amostra de estudantes adolescentes portugueses. Para aferir o BEP, foi utilizada a versão portuguesa de 30 itens para adolescentes das escalas de Ryff; o rendimento escolar foi aferido com recurso às avaliações finais de cada período letivo. O programa utilizado baseou-se no desenvolvimento das habilidades sociais de comunicação, assertividade e resolução de problemas, durante o ano letivo numa frequência semanal de 45 minutos nas aulas de Formação Cívica, em estudantes do 7º e 8º anos de escolaridade. Os dados longitudinais foram analisados através da estatística não paramétrica, recorrendo aos testes Wilcoxon-Mann-Whitney correlação de Spearman do programa SPSS®, versão 20.0. Os resultados mostram impacto do programa de desenvolvimento de habilidades sociais nas dimensões do BEP – autoaceitação, relações positivas com os outros, domínio do meio, crescimento pessoal, objetivos na vida e no BEP global em um ou mais momentos do pós teste. Os resultados demonstram igualmente correlações positivas entre as dimensões do BEP – autonomia, autoaceitação, domínio do meio, objetivos na vida e do BEP global e o rendimento escolar, em três ou mais momentos observados.

Seismic retrofitting of RC buildings using CFRP and post-tensioned metal straps: shake table tests

This article examines the effectiveness of two innovative retrofitting solutions at enhancing the seismic behaviour of a substandard reinforced concrete building tested on a shake table as part of the Pan-European funded project BANDIT. To simulate typical substandard construction, the reinforcement of columns and beam-column joints of the full-scale structure had inadequate detailing. An initial series of shake table tests were carried out to assess the seismic behaviour of the bare building and the effectiveness of a first retrofitting intervention using Post-Tensioned Metal Straps. After these tests, columns and joints were repaired and subsequently retrofitted using a retrofitting solution consisting of Carbon Fibre Reinforced Polymers and Post-Tensioned Metal Straps applied on opposite frames of the building. The building was then subjected to unidirectional and three-dimensional incremental seismic excitations to assess the effectiveness of the two retrofitting solutions at improving the global and local building performance. The article provides details of the above shake table testing programme and retrofitting solutions, and discusses the test results in terms of the observed damage, global damage indexes, performance levels and local strains. It is shown that whilst the original bare building was significantly damaged at a peak ground acceleration (PGA) of 0.15g, the retrofitted building resisted severe threedimensional shake table tests up to PGA=0.60g without failure. Moreover, the retrofitting intervention enhanced the interstorey drift ratio capacity of the 1st and 2nd floors by 160% and 110%, respectively. Therefore, the proposed dual retrofitting system is proven to be very effective for improving the seismic performance of substandard buildings.

Full-Scale Shaking Table Tests on a Substandard RC Building Repaired and Strengthened with Post-Tensioned Metal Straps

The effectiveness of a novel Post-Tensioned Metal Strapping (PTMS) technique at enhancing the seismic behaviour of a substandard RC building was investigated through full-scale shake-table tests during the EU-funded project BANDIT. The building had inadequate reinforcement detailing in columns and joints to replicate old construction practices. After the bare building was initially damaged significantly, it was repaired and strengthened with PTMS to perform additional seismic tests. The PTMS technique improved considerably the seismic performance of the tested building. Whilst the bare building experienced critical damage at an earthquake of PGA=0.15g, the PTMS-strengthened building sustained a PGA=0.35g earthquake without compromising stability.

Students’ engagement in school, achievement goals and grade level: A literature review

Este E-Book reúne um conjunto de investigações apresentadas no “I Congresso Internacional Envolvimento dos Alunos na Escola: Perspetivas da Psicologia e Educação” (ICIEAE), organizado no âmbito do “Projeto PTDC/CPE-CED/114362/2009 - Envolvimento dos Alunos na Escola: Diferenciação e Promoção” (EAE-DP), financiado pela Fundação para a Ciência e a Tecnologia (FCT).

Job-demand for Learning and Job-related Learning: The Moderating Effect of Need For Achievement

Purpose – The purpose of the research is to examine whether need for achievement moderates the relationship between job-demand for learning and job-related learning. Design/methodology/approach – Data were obtained from 153 participants full-time. The scales for job-demand for learning and job-related learning were developed for this research, whilst the scale for need for achievement was obtained from an external source. Hierarchical regression analysis was used in testing the hypothesized moderating effects. Findings – It was found that need for achievement moderates the relationship between job-demand for learning and job-related learning. Specifically, although job-demand for learning is correlated positively to job-related learning for both the high and the low need for achievement groups, this correlation is stronger amongst the high group. Research limitations/implications – The use of a cross-sectional design in this study prohibits inferences being drawn regarding the causal relationships between job-demand for learning, need for achievement and job-related learning. Practical implications – Job-related learning can be facilitated through increasing the need for achievement by allowing employees to establish their own learning and performance goals rather than by imposing such goals on them. The redesign of jobs to create challenges for employees is an equally important practical consideration. Originality/value – This research provides a succinct view of the relationship between an external factor, job-demand for learning, and an internal motivator, need for achievement. It emphasizes the degree to which organizations can facilitate learning through design of challenging jobs, to the extent of the individuals’ motivation.

Personality and performance on digit span tests in online and offline settings.

This paper describes two studies examining links between personality and performance on a cognitive test in online and laboratory settings. Study 1 was completed online. 345 participants passively recruited through a personality assessment website completed a Five Factor Model personality inventory derived from the International Personality Item Pool. They then completed an online text-based digit span test. This required participants to repeat increasingly longer strings of digits, either in the same order (forward) or in the opposite of the presentation order (reverse). Conventional digit span tasks ask participants to respond verbally; in this instance they responded by typing the digits. Agreeableness and Openness to Experience each had small but significant associations with forward and reverse digit span. In a second, laboratory based, study, 103 participants completed paper versions of the IPIP Five Factor inventory, the NEO-FFI, and a battery of cognitive tests including the WAIS 4 digit span test. In this instance, Agreeableness and Openness to Experience were not significantly correlated with digit span measures. Taken together, these studies suggest that personality characteristics may influence performance on an online cognitive test. This effect was not seen in an offline version of the study. The paper will consider potential implications for online testing, for equivalence of online and offline methods, and for links between personality and performance on this cognitive test.

Ecotoxicity tests using the green algae chlorella vulgaris — a useful tool in hazardous effluents management

The treatment efficiency of laboratory wastewaters was evaluated and ecotoxicity tests with Chlorella vulgaris were performed on them to assess the safety of their environmental discharge. For chemical oxygen demand wastewaters, chromium (VI), mercury (II) and silver were efficiently removedby chemical treatments.Areduction of ecotoxicitywas achieved; nevertheless, an EC50 (effective concentration that causes a 50% inhibition in the algae growth) of 1.5% (v/v) indicated still high level of ecotoxicity. For chloride determination wastewaters, an efficient reduction of chromium and silver was achieved after treatment. Regarding the reduction of ecotoxicity observed, EC50 increased from 0.059% to 0.5%, only a 0.02% concentration in the aquatic environment would guarantee no effects. Wastewaters containing phenanthroline/iron (II) complex were treated by chemical oxidation. Treatmentwas satisfactory concerning chemical parameters, although an increase in ecotoxicitywas observed (EC50 reduced from 0.31% to 0.21%). The wastes from the kinetic study of persulphate and iodide reaction were treated with sodium bisulphite until colour was removed. Although they did not reveal significant ecotoxicity, only over 1% of the untreated waste produced observable effects over algae. Therefore, ecotoxicity tests could be considered a useful tool not only in laboratory effluents treatment, as shown, but also in hazardous wastewaters management.

Promoção do empreendedorismo nas escolas: impacto da Junior Achievement Portugal, Associação Aprender a Empreender

Dissertação apresentada à Escola Superior de Comunicação Social como parte dos requisitos para obtenção de grau de mestre em Publicidade e Marketing.

Layered smart grid architecture approach and field tests by ZigBee technology

This paper presents a layered Smart Grid architecture enhancing security and reliability, having the ability to act in order to maintain and correct infrastructure components without affecting the client service. The architecture presented is based in the core of well design software engineering, standing upon standards developed over the years. The layered Smart Grid offers a base tool to ease new standards and energy policies implementation. The ZigBee technology implementation test methodology for the Smart Grid is presented, and provides field tests using ZigBee technology to control the new Smart Grid architecture approach. (C) 2014 Elsevier Ltd. All rights reserved.

Role of abrasive material on micro-abrasion wear tests

Micro-abrasion wear tests with ball-cratering configuration are widely used. Sources of variability are already studied by different authors and conditions for testing are parameterized by BS EN 1071-6: 2007 standard which refers silicon carbide as abrasive. However, the use of other abrasives is possible and allowed. In this work, ball-cratering wear tests were performed using four different abrasive particles of three dissimilar materials: diamond, alumina and silicon carbide. Tests were carried out under the same conditions on a steel plate provided with TiB2 hard coating. For each abrasive, five different test durations were used allowing understanding the initial wear phenomena. Composition and shape of abrasive particles were investigated by SEM and EDS. Scar areas were observed by optical and electronic microscopy in order to understand the wear effects caused by each of them. Scar geometry and grooves were analyzed and compared. Wear coefficient was calculated for each situation. It was observed that diamond particles produce well-defined and circular wear scars. Different silicon carbide particles presented dissimilar results as consequence of distinct particle shape and size distribution.

Influence of the abrasive particles size in the micro-abrasion wear tests of TiAlSiN thin coatings

Ball rotating micro-abrasion tribometers are commonly used to carry out wear tests on thin hard coatings. In these tests, different kinds of abrasives were used, as alumina (Al2O3), silicon carbide (SiC) or diamond. In each kind of abrasive, several particle sizes can be used. Some studies were developed in order to evaluate the influence of the abrasive particle shape in the micro-abrasion process. Nevertheless, the particle size was not well correlated with the material removed amount and wear mechanisms. In this work, slurry of SiC abrasive in distilled water was used, with three different particles size. Initial surface topography was accessed by atomic force microscopy (AFM). Coating hardness measurements were performed with a micro-hardness tester. In order to evaluate the wear behaviour, a TiAlSiN thin hard film was used. The micro-abrasion tests were carried out with some different durations. The abrasive effect of the SiC particles was observed by scanning electron microscopy (SEM) both in the films (hard material) as in the substrate (soft material), after coating perforation. Wear grooves and removed material rate were compared and discussed.

Semi-destructive in situ tests as support to the assessment of a conservation process

This paper refers to the assessment on site by semi-destructive testing (SDT) methods of the consolidation efficiency of a conservation process developed by Henriques (2011) for structural and non-structural pine wood elements in service. This study was applied on scots pine wood (Pinus sylvestris L.) degraded by fungi after treatment with a biocidal product followed by consolidation with a polymeric product. This solution avoids substitutions of wood moderately degraded by fungi, improving its physical and mechanical characteristics. The consolidation efficiency was assessed on site by methods of drill resistance and penetration resistance. The SDT methods used showed good sensitivity to the conservation process and could evaluate their effectiveness. (C) 2015 Elsevier Ltd. All rights reserved.

Efficient schedulability tests for real-time embedded systems with urgent routines

Task scheduling is one of the key mechanisms to ensure timeliness in embedded real-time systems. Such systems have often the need to execute not only application tasks but also some urgent routines (e.g. error-detection actions, consistency checkers, interrupt handlers) with minimum latency. Although fixed-priority schedulers such as Rate-Monotonic (RM) are in line with this need, they usually make a low processor utilization available to the system. Moreover, this availability usually decreases with the number of considered tasks. If dynamic-priority schedulers such as Earliest Deadline First (EDF) are applied instead, high system utilization can be guaranteed but the minimum latency for executing urgent routines may not be ensured. In this paper we describe a scheduling model according to which urgent routines are executed at the highest priority level and all other system tasks are scheduled by EDF. We show that the guaranteed processor utilization for the assumed scheduling model is at least as high as the one provided by RM for two tasks, namely 2(2√−1). Seven polynomial time tests for checking the system timeliness are derived and proved correct. The proposed tests are compared against each other and to an exact but exponential running time test.