Down-Regulating γ-gliadins in bread wheat leads to non-specific increases in other gluten proteins and has no major effect on dough gluten strength.

Background Gliadins are a major component of gluten proteins but their role in the mixing of dough is not well understood because their contribution to wheat flour functional properties are not as clear as for the glutenin fraction. Methodology/Principal Findings Transgenic lines of bread wheat with γ-gliadins suppressed by RNAi are reported. The effects on the gluten protein composition and on technological properties of flour were analyzed by RP-HPLC, by sodium dodecyl sulfate sedimentation (SDSS) test and by Mixograph analysis. The silencing of γ-gliadins by RNAi in wheat lines results in an increase in content of all other gluten proteins. Despite the gluten proteins compensation, in silico analysis of amino acid content showed no difference in the γ-gliadins silenced lines. The SDSS test and Mixograph parameters were slightly affected by the suppression of γ-gliadins. Conclusions/Significance Therefore, it is concluded that γ-gliadins do not have an essential functional contribution to the bread-making quality of wheat dough, and their role can be replaced by other gluten proteins

Determining the elastic-plastic properties of metallic materials through instrumented indentation

En los últimos años, y asociado al desarrollo de la tecnología MEMS, la técnica de indentación instrumentada se ha convertido en un método de ensayo no destructivo ampliamente utilizado para hallar las características elástico-plásticas de recubrimientos y capas delgadas, desde la escala macroscópica a la microscópica. Sin embargo, debido al complejo mecanismo de contacto debajo de la indentación, es urgente proponer un método más simple y conveniente para obtener unos resultados comparables con otras mediciones tradicionales. En este estudio, el objetivo es mejorar el procedimiento analítico para extraer las propiedades elástico-plásticas del material mediante la técnica de indentación instrumentada. La primera parte se centra en la metodología llevada a cabo para medir las propiedades elásticas de los materiales elásticos, presentándose una nueva metodología de indentación, basada en la evolución de la rigidez de contacto y en la curva fuerza-desplazamiento del ensayo de indentación. El método propuesto permite discriminar los valores de indentación experimental que pudieran estar afectados por el redondeo de la punta del indentador. Además, esta técnica parece ser robusta y permite obtener valores fiables del modulo elástico. La segunda parte se centra en el proceso analítico para determinar la curva tensión-deformación a partir del ensayo de indentación, empleando un indentador esférico. Para poder asemejar la curva tension-deformación de indentación con la que se obtendría de un ensayo de tracción, Tabor determinó empíricamente un factor de constricción de la tensión () y un factor de constricción de la deformación (). Sin embargo, la elección del valor de y  necesitan una derivación analítica. Se describió analíticamente una nueva visión de la relación entre los factores de constricción de tensión y la deformación basado en la deducción de la ecuación de Tabor. Un modelo de elementos finitos y un diseño experimental se realizan para evaluar estos factores de constricción. A partir de los resultados obtenidos, las curvas tension-deformación extraidas de los ensayos de indentación esférica, afectadas por los correspondientes factores de constricción de tension y deformación, se ajustaron a la curva nominal tensión-deformación obtenida de ensayos de tracción convencionales. En la última parte, se estudian las propiedades del revestimiento de cermet Inconel 625-Cr3C2 que es depositado en el medio de una aleación de acero mediante un láser. Las propiedades mecánicas de la matriz de cermet son estudiadas mediante la técnica de indentación instrumentada, haciendo uso de las metodologías propuestas en el presente trabajo. In recent years, along with the development of MEMS technology, instrumented indentation, as one type of a non-destructive measurement technique, is widely used to characterize the elastic and plastic properties of metallic materials from the macro to the micro scale. However, due to the complex contact mechanisms under the indentation tip, it is necessary to propose a more convenient and simple method of instrumented indention to obtain comparable results from other conventional measurements. In this study, the aim is to improve the analytical procedure for extracting the elastic plastic properties of metallic materials by instrumented indentation. The first part focuses on the methodology for measuring the elastic properties of metallic materials. An alternative instrumented indentation methodology is presented. Based on the evolution of the contact stiffness and indentation load versus the depth of penetration, the possibility of obtaining the actual elastic modulus of an elastic-plastic bulk material through instrumented sharp indentation tests has been explored. The proposed methodology allows correcting the effect of the rounding of the indenter tip on the experimental indentation data. Additionally, this technique does not seem too sensitive to the pile-up phenomenon and allows obtaining convincing values of the elastic modulus. In the second part, an analytical procedure is proposed to determine the representative stress-strain curve from the spherical indentation. Tabor has determined the stress constraint factor (stress CF), and strain constraint factor (strain CF), empirically but the choice of a value for and is debatable and lacks analytical derivation. A new insight into the relationship between stress and strain constraint factors is analytically described based on the formulation of Tabor’s equation. Finite element model and experimental tests have been carried out to evaluate these constraint factors. From the results, representative stress-strain curves using the proposed strain constraint factor fit better with the nominal stress-strain curve than those using Tabor’s constraint factors. In the last part, the mechanical properties of an Inconel 625-Cr3C2 cermet coating which is deposited onto a medium alloy steel by laser cladding has been studied. The elastic and plastic mechanical properties of the cermet matrix are studied using depth-sensing indentation (DSI) on the micro scale.

The law relating to actionable non-disclosure and other breaches of duty in relations of confidence and influence,

Mode of access: Internet.

A scheme for utilizing the polarizing microscope in the determination of minerals of non-metalic lustre ...

"Reprinted from the School of mines quarterly, vol.XXXIV, no. 4, July, 1913."

The prospector's field-book and guide in the search for and the easy determination of ores and other useful minerals /

Mode of access: Internet.

A collection of English vvords not generally used, with their significations and original, in two alphabetical catalogues, the one of such as are proper to the northern, the other to the southern counties. With catalogues of English birds and fishes; and an account of the preparing and refining such metals and minerals as are gotten in England.

Mode of access: Internet.

A new and complete dictionary of arts and sciences : comprehending all the branches of useful knowledge, with accurate descriptions as well of the various machines, instruments, tools, figures, and schemes necessary for illustrating them, as of the classes, kinds, preparations, and uses of natural productions, whether animals, vegetables, minerals, fossils, or fluids : together with the kingdoms, provinces, cities, towns, and other remarkable places throughout the world : illustrated with above three hundred copper-plates, engraved by Mr. Jefferys, geographer to His Majesty : the whole extracted from the best authors in all languages /

Frontispiece, v. 1, by C. Grignion after S. Wale.

International committee for the application of the agreement regarding non-intervention in Spain : the legislative and other measures taken by the participating governments to give effect to the agreement regarding non-intervention in Spain, and by the Swiss government to prohibit the export, &c., of arms and war material from Switzerland to Spain /

Mode of access: Internet.

Non-miraculous Christianity : and other sermons preached in the chapel of Trinity College, Dublin /

Includes bibliographical footnotes.

Further analyses on Micronesian banana, taro, breadfruit and other foods for provitamin A carotenoids and minerals

Few Micronesian foods have been analyzed for nutrient content. Information is needed on locally grown, culturally acceptable foods that could be promoted to alleviate, vitamin A deficiency in the Federated States of Micronesia. Using an ethnographic approach that included key informant interviews and observation, Micronesian cultivars with potential for high-carotenoid content according to their coloration were identified. These cultivars of banana, giant swamp taro, breadfruit and other foods were analyzed for alpha- and beta-carotene using high-performance liquid chromatography (HPLC) and for nine minerals using inductively coupled plasma (ICP). A wide range of provitamin A carotenoid levels was found in banana, taro, and breadfruit cultivars, some containing very high levels (beta-carotene content from 515 to 6360 mug/100 g in banana, 260 to 1651 mug/100 g in taro, and 295 to 868 mug/100 g in breadfruit, edible portion). Other cultivars contained moderate levels, but as they can be eaten in large quantities, they may contribute significantly to vitamin A status. The taro samples contained very high levels of zinc (mean 5.9 mg/100 g) and significant levels of other minerals (mean content of calcium was 120 mg/100 g). These staples with cultural acceptability and high availability potentially could play a role in vitamin A, micronutrient, and chronic disease programs in the Pacific. (C) 2003 Elsevier Science Ltd. All rights reserved.

Genetic effects on alcohol dependence risk: re-evaluating the importance of psychiatric and other heritable risk factors

Background. Genetic influences have been shown to play a major role in determining the risk of alcohol dependence (AD) in both women and men; however, little attention has been directed to identifying the major sources of genetic variation in AD risk. Method. Diagnostic telephone interview data from young adult Australian twin pairs born between 1964 and 1971 were analyzed. Cox regression models were fitted to interview data from a total of 2708 complete twin pairs (690 MZ female, 485 MZ male, 500 DZ female, 384 DZ male, and 649 DZ female/male pairs). Structural equation models were fitted to determine the extent of residual genetic and environmental influences on AD risk while controlling for effects of sociodemographic and psychiatric predictors on risk. Results. Risk of AD was increased in males, in Roman Catholics, in those reporting a history of major depression, social anxiety problems, and conduct disorder, or (in females only) a history of suicide attempt and childhood sexual abuse; but was decreased in those reporting Baptist, Methodist, or Orthodox religion, in those who reported weekly church attendance, and in university-educated males. After allowing for the effects of sociodemographic and psychiatric predictors, 47 % (95 % CI 28-55) of the residual variance in alcoholism risk was attributable to additive genetic effects, 0 % (95 % CI 0-14) to shared environmental factors, and 53 % (95 % CI 45-63) to non-shared environmental influences. Conclusions. Controlling for other risk factors, substantial residual heritability of AD was observed, suggesting that psychiatric and other risk factors play a minor role in the inheritance of AD.