Architectural modelling of maize under water stress

Two field experiments using maize (Pioneer 31H50) and three watering regimes [(i) irrigated for the whole crop cycle, until anthesis, (ii) not at all (experiment 1) and (iii) fully irrigated and rain grown for the whole crop cycle (experiment 2)] were conducted at Gatton, Australia, during the 2003-04 season. Data on crop ontogeny, leaf, sheath and internode lengths and leaf width, and senescence were collected at 1- to 3-day intervals. A glasshouse experiment during 2003 quantified the responses of leaf shape and leaf presentation to various levels of water stress. Data from experiment 1 were used to modify and parameterise an architectural model of maize (ADEL-Maize) to incorporate the impact of water stress on maize canopy characteristics. The modified model produced accurate fitted values for experiment 1 for final leaf area and plant height, but values during development for leaf area were lower than observed data. Crop duration was reasonably well fitted and differences between the fully irrigated and rain-grown crops were accurately predicted. Final representations of maize crop canopies were realistic. Possible explanations for low values of leaf area are provided. The model requires further development using data from the glasshouse study and before being validated using data from experiment 2 and other independent data. It will then be used to extend functionality in architectural models of maize. With further research and development, the model should be particularly useful in examining the response of maize production to water stress including improved prediction of total biomass and grain yield. This will facilitate improved simulation of plant growth and development processes allowing investigation of genotype by environment interactions under conditions of suboptimal water supply.

On the environmental genetics of depressive symptoms : Focus on two serotonergic genes

Depression is a complex psychiatric disorder influenced by several genes, environmental factors, and their interplay. Serotonin receptor 2A (HTR2A) and tryptophan hydroxylase 1 (TPH1) genes have been implicated in vulnerability to depression and other psychiatric disorders, but the results have been inconsistent. The present study examined whether these two genes moderated the influence of different depressogenic environmental factors on subthreshold depressive symptoms (assessed on a modified version of Beck s Depression Inventory, BDI) and depression-related temperament, i.e., harm avoidance (assessed on the Temperament and Character Inventory, TCI). The environmental factors included measures of childhood and adolescence exposure, i.e., maternal nurturance and parental socioeconomic status, and adulthood social circumstances, i.e., perceived social support and urban/rural residence. The participants were two randomly selected subsamples (n = 1246, n = 341) from the longitudinal population-based Cardiovascular Risk in Young Finns study (n = 3596). Childhood environmental factors were assessed when the participants were 3 to 18 years of age, and three years after the baseline. Adulthood environmental factors and outcome measures were assessed 17 and 21 years later when the participants were 21 to 39 years of age. The T102C polymorphism of the HTR2A gene moderated the association between childhood maternal nurturance and adulthood depressive symptoms, such that exposure to high maternal nurturance predicted low depressive symptoms among individuals carrying the T/T or T/C genotypes, but not among those carrying the C/C genotype. Likewise, high parental SES predicted low adulthood harm avoidance in individuals carrying the T/T or T/C genotype, but not in C/C-genotype carriers. Individuals carrying the T/T or T/C genotype were also sensitive to urban/rural residence, such that they had lower depressive symptoms in urban than in rural areas, whereas those carrying the C/C genotype were not sensitive to urban/rural residence difference. HTR2A did not moderate the influence of social support. TheA779C/A218C haplotype of the TPH1 gene was not involved in the association between childhood environment and adulthood outcomes. However, individuals carrying A alleles of the TPH1 haplotype were more vulnerable to the lack of adulthood social support in terms of high depressive symptoms than their counterparts carrying no A alleles. Furthermore, individuals living in remote rural areas and carrying the A/A haplotype had higher depressive symptoms than those carrying other genotypes of the TPH1. The findings suggest that the HTR2A and TPH1 genes may be involved in the development of depression by influencing individual s sensitivity to depressogenic environmental influences.

Laatutyöhön sitoutumisen edellytykset ammattikorkeakoulussa

The goal of this research was to establish the necessary conditions under which individuals are prepared to commit themselves to quality assurance work in the organisation of a Polytechnic. The conditions were studied using four main concepts: awareness of quality, commitment to the organisation, leadership and work welfare. First, individuals were asked to describe these four concepts. Then, relationships between the concepts were analysed in order to establish the conditions for the commitment of an individual towards quality assurance work (QA). The study group comprised the entire personnel of Helsinki Polytechnic, of which 341 (44.5%) individuals participated. Mixed methods were used as the methodological base. A questionnaire and interviews were used as the research methods. The data from the interviews were used for the validation of the results, as well as for completing the analysis. The results of these interviews and analyses were integrated using the concurrent nested design method. In addition, the questionnaire was used to separately analyse the impressions and meanings of the awareness of quality and leadership, because, according to the pre-understanding, impressions of phenomena expressed in terms of reality have an influence on the commitment to QA. In addition to statistical figures, principal component analysis was used as a description method. For comparisons between groups, one way variance analysis and effect size analysis were used. For explaining the analysis methods, forward regression analysis and structural modelling were applied. As a result of the research it was found that 51% of the conditions necessary for a commitment to QA were explained by an individual’s experience/belief that QA was a method of development, that QA was possible to participate in and that the meaning of quality included both product and process qualities. If analysed separately, other main concepts (commitment to the organisation, leadership and work welfare) played only a small part in explaining an individual’s commitment. In the context of this research, a structural path model of the main concepts was built. In the model, the concepts were interconnected by paths created as a result of a literature search covering the main concepts, as well as a result of an analysis of the empirical material of this thesis work. The path model explained 46% of the necessary conditions under which individuals are prepared to commit themselves to QA. The most important path for achieving a commitment stemmed from product and system quality emanating from the new goals of the Polytechnic, moved through the individual’s experience that QA is a method of the total development of quality and ended in a commitment to QA. The second most important path stemmed from the individual’s experience of belonging to a supportive work community, moved through the supportive value of the job and through affective commitment to the organisation and ended in a commitment to QA. The third path stemmed from an individual’s experiences in participating in QA, moved through collective system quality and through these to the supportive value of the job to affective commitment to the organisation and ended in a commitment to QA. The final path in the path model stemmed from leadership by empowerment, moved through collective system quality, the supportive value of the job and an affective commitment to the organisation, and again, ended in a commitment to QA. As a result of the research, it was found that the individual’s functional department was an important factor in explaining the differences between groups. Therefore, it was found that understanding the processing of part cultures in the organisation is important when developing QA. Likewise, learning-teaching paradigms proved to be a differentiating factor. Individuals thinking according to the humanistic-constructivistic paradigm showed more commitment to QA than technological-rational thinkers. Also, it was proved that the QA training program did not increase commitment, as the path model demonstrated that those who participated in training showed 34% commitment, whereas those who did not showed 55% commitment. As a summary of the results it can be said that the necessary conditions under which individuals are prepared to commit themselves to QA cannot be treated in a reductionistic way. Instead, the conditions must be treated as one totality, with all the main concepts interacting simultaneously. Also, the theoretical framework of quality must include its dynamic aspect, which means the development of the work of the individual and learning through auditing. In addition, this dynamism includes the reflection of the paradigm of the functions of the individual as well as that of all parts of the organisation. It is important to understand and manage the various ways of thinking and the cultural differences produced by the fragmentation of the organisation. Finally, it seems possible that the path model can be generalised for use in any organisation development project where the personnel should be committed.

Electrical transport and crystallization studies of glassy semiconducting Si20Te80 alloy at high pressure

The effect of pressure on the electrical resistivity of bulk Si20Te80 glass is reported. Results of calorimetric, X-ray and transmission electron microscopy investigations at different stages of crystallization of bulk Si20Te80 glass are also presented. A pressure induced glass-to-crystal transition occurs at a pressure of 7 GPa. Pressure and temperature dependence of the electrical resistivity of Si20Te80 glass show the observed transition is a pressure induced glassy semiconductor to crystalline metal transition. The glass also exhibits a double Tg effect and double stage crystallization, under heating. The differences between the temperature induced crystallization (primary crystallization) and pressure induced congruent crystallization are discussed.

Phagocytosis Of Mast Cell Granules By Cultured Fibroblasts

Cultured rat embryonic skin fibroblasts phagocytosed rat mast cell granules added to the medium or released from co-cultured mast cells by rabbit anti-rat IgE or Compound 48/80. Electron microscopy of fibroblasts incubated with mast cell granules revealed that granules adjacent to the plasmalemma were engulfed by long, thin cytoplasmic processes.

Evaluation of an intervention for patients with alcohol-related injuries: results of a mixed methods study

Objective: To explore the effect of education and training on the delivery of alcohol screening and brief intervention and referral to high-risk patients in a hospital setting. Main outcome measures included; delivery of training; practice change in relation to staff performing alcohol screening, brief intervention and referrals. Methods: Observational study design using mixed methods set in a tertiary referral hospital. Pre-post assessment of medical records and semi-structured interviews with key informants. Results: Routine screening for substance misuse (9% pre / 71.4% post) and wellbeing concerns (6.6% pre / 15 % post) was more frequent following the introduction of resources and staff participation in educational workshops. There was no evidence of a concomitant increase in delivery of brief intervention or referrals to services. Implementation challenges, including time constraints and staff attitudes, and enablers such as collaboration and visible pathways, were identified. Conclusion: Rates of patient screening increased, however barriers to delivery of brief intervention and referrals remained. Implementation strategies targeting specific barriers and enablers to introducing interventions are both required to improve the application of secondary prevention for patients in acute settings. Implications: Educational training, formalised liaison between services, systematised early intervention protocols, and continuous quality improvement processes will progress service delivery in this area.

Population dynamics of the European rabbit (Oryctolagus cuniculus) in north eastern Australia: simulated responses to control

Wild European rabbits are a serious problem to agriculture in Australia, with an estimated annual cost of A$ 113 million. Biological control agents (myxomatosis and rabbit haemorrhagic disease virus) have caused large and sustained declines in rabbit populations throughout Australia. A simulation model incorporates these diseases as well as warren destruction as methods of controlling rabbit populations in Queensland, north eastern Australia. These diseases reduced populations by 90-99% and the combination of these and warren destruction led to 100% control in simulations at six sites across southern Queensland. Increasing monthly pasture growth by 15% had little effect on simulated populations whereas a 15% decrease reduced populations by 0-50%. An increase in temperature of 2.5 °C would lead to a 15-60% decrease in populations. These effects suggest that climate change will lead to a decrease in the population of rabbits in Queensland and a retraction in the northern limit of their distribution in Australia.

Impacts of grazing management options on pasture and animal productivity in a Heteropogon contortus (black speargrass) pasture in central Queensland. 4. Animal production.

Steer liveweight gains were measured in an extensive grazing study conducted in a Heteropogon contortus (black speargrass) pasture in central Queensland between 1988 and 2001. Treatments included a range of stocking rates in native pastures, legume-oversown native pasture and animal diet supplement/spring-burning pastures. Seasonal rainfall throughout this study was below the long-term mean. Mean annual pasture utilisation ranged from 13 to 61%. Annual liveweight gains per head in native pasture were highly variable among years and ranged from a low of 43 kg/steer at 2 ha/steer to a high of 182 kg/steer at 8 ha/steer. Annual liveweight gains were consistently highest at light stocking and decreased with increasing stocking rate. Annual liveweight gain per hectare increased linearly with stocking rate. These stocking rate trends were also evident in legume-oversown pastures although both the intercept and slope of the regressions for legume-oversown pastures were higher than that for native pasture. The highest annual liveweight gain for legume-oversown pasture was 221 kg/steer at 4 ha/steer. After 13 years, annual liveweight gain per unit area occurred at the heaviest stocking rate despite deleterious changes in the pasture. Across all years, the annual liveweight advantage for legume-oversown pastures was 37 kg/steer. Compared with native pasture, changes in annual liveweight gain with burning were variable. It was concluded that cattle productivity is sustainable when stocking rates are maintained at 4 ha/steer or lighter (equivalent to a utilisation rate around 30%). Although steer liveweight gain occurred at all stocking rates and economic returns were highest at heaviest stocking rates, stocking rates heavier than 4 ha/steer are unsustainable because of their long-term impact on pasture productivity.

Application of a model to assess aflatoxin risk in peanuts.

When exposed to hot (22-35 degrees C) and dry climatic conditions in the field during the final 4-6 weeks of pod filling, peanuts (Arachis hypogaea L.) can accumulate highly carcinogenic and immuno-suppressing aflatoxins. Forecasting of the risk posed by these conditions can assist in minimizing pre-harvest contamination. A model was therefore developed as part of the Agricultural Production Systems Simulator (APSIM) peanut module, which calculated an aflatoxin risk index (ARI) using four temperature response functions when fractional available soil water was <0.20 and the crop was in the last 0.40 of the pod-filling phase. ARI explained 0.95 (P <= 0.05) of the variation in aflatoxin contamination, which varied from 0 to c. 800 mu g/kg in 17 large-scale sowings in tropical and four sowings in sub-tropical environments carried out in Australia between 13 November and 16 December 2007. ARI also explained 0.96 (P <= 0.01) of the variation in the proportion of aflatoxin-contaminated loads (>15 mu g/kg) of peanuts in the Kingaroy region of Australia during the period between the 1998/99 and 2007/08 seasons. Simulation of ARI using historical climatic data from 1890 to 2007 indicated a three-fold increase in its value since 1980 compared to the entire previous period. The increase was associated with increases in ambient temperature and decreases in rainfall. To facilitate routine monitoring of aflatoxin risk by growers in near real time, a web interface of the model was also developed. The ARI predicted using this interface for eight growers correlated significantly with the level of contamination in crops (r=095, P <= 0.01). These results suggest that ARI simulated by the model is a reliable indicator of aflatoxin contamination that can be used in aflatoxin research as well as a decision-support tool to monitor pre-harvest aflatoxin risk in peanuts.

Influence of electroslag refining on the hot ductility of AISI 4340 steel in torsion

Electroslag refining is a useful remelting process by which clean steels can be produced for sophisticated applications. In this investigation, AISI 4340 steel has been electroslag refined and the improvement in its hot ductility has been assessed using hot torsion tests; electroslag refining has improved the hot ductility considerably. The temperature at which peak ductility is obtained has also increased — from 1473 K in the unrefined steel to 1573 K in ESR steel. Results indicate that it should be possible to subject the ESR ingot to much higher strains per unit operation during industrial hot working processes such as forging, which would result in a considerable saving of power. The improvement in hot ductility in ESR steel has been attributed primarily to the removal of non-metallic inclusions and the reduction in sulphur content. From the apparent activation energy estimated from the hot torsion data, the dynamic recrystallization process is identified as the mechanism controlling the rate of hot deformation.

Bromus catharticus striate mosaic virus: a new mastrevirus infecting Bromus catharticus from Australia.

Although monocotyledonous-plant-infecting mastreviruses (in the family Geminiviridae) are known to cause economically significant crop losses in certain areas of the world, in Australia, they pose no obvious threat to agriculture. Consequently, only a few Australian monocot-infecting mastreviruses have been described, and only two have had their genomes fully sequenced. Here, we present the third full-genome sequence of an Australian monocot-infecting mastrevirus from Bromus catharticus belonging to a distinct species, which we have tentatively named Bromus catharticus striate mosaic virus (BCSMV). Although the genome of this new virus shares only 57.7% sequence similarity with that of its nearest known relative, Digitaria didactyla striate mosaic virus (DDSMV; also from Australia), it has features typical of all other known mastrevirus genomes. Phylogenetic analysis showed that both the full genome and each of its probable expressed proteins group with the two other characterised Australian monocot-infecting mastreviruses. Besides the BCSMV genome sequence revealing that Australian monocot-infecting mastrevirus diversity rivals that seen in Africa, it has enabled us, for the first, to time detect evidence of recombination amongst the Australian viruses. Specifically, it appears that DDSMV possesses a short intergenic region sequence that has been recombinationally derived from either BCSMV or a close relative that has not yet been identified.

Impact of dental insurance on adults’ oral health care in Tehran, Iran.

The aim of the present study was to determine relationships between insurance status and utilization of oral health care and its characteristics and to identify factors related to insured patients’ selection of dental clinic or dentist. The study was based on cross-sectional data obtained through phone interviews. The target population included adults in the city of Tehran. Using a two-stage stratified random technique, 3,200 seven-digit numbers resembling real phone numbers were drawn; when calling, 1,669 numbers were unavailable (busy, no answer, fax, line blocked). Of the 1,531 subjects who answered the phone call, 224 were outside the target age (under 18), and 221 refused to respond, leaving 1,086 subjects in the final sample. The interviews were carried out using a structured questionnaire and covered characteristics of dental visits, the respondent’s reason for selecting a particular dentist or clinic and demographic and socio-economic background (gender, age, level of education, income, and insurance status). Data analysis included the Chi-square test, ANOVA, and logistic regression and the corresponding odds ratios (OR). Of all the 1,086 respondents, 57% were women, 62% were under age 35, 46% had a medium and 34% a high level of education, 13% were under the poverty line, and 70% had insurance coverage; 64% with the public, and 6% with a commercial insurance. Having insurance coverage was more likely for women (OR=1.5), for those in the oldest age group (OR=2.0), and for those with a high level of education (OR=2.5). Of those with dental insurance, 54% reported having had a dental visit within the past 12 months ; more often by those with commercial insurance in comparison with public (65% vs. 53% p<0.001). Check-up as the reason for the most recent visit occurred most frequently among those with commercial insurance (28%) compared with those having public insurance (16%) or being non-insured (13%) (p<0.001). Having had two or more dental visits within the past 12 months was most common among insured respondents, when compared with the non-insured (31% vs. 22% p=0.01). The non-insured respondents reported tooth extractions almost twice as frequently as did the insured ones (p<0.001). Of the 726 insured subjects, 60% selected fully out-of-pocket-paid services (FOP), and 53% were unaware of their insurance benefits. Of those who selected FOP, good interpersonal aspects (OR=4.6), being unaware of dental insurance benefits (OR=4.6), and good technical aspects (OR=2.3) as a reason had greater odds of selecting FOP. The present study revealed that dental insurance was positively related to demand for oral health care as well as to utilization of services, but to the latter with a minor extent. Among insured respondents, despite their opportunity to use fully or highly subsidized oral health care services, good interpersonal relationship and high quality of services were the most important factors when an insured patient selected a dentist or a clinic. The present findings indicate a clear need to modify dental insurance systems in Iran to facilitate optimal use of oral health care services to maximize the oral health of the population. A special emphasis in the insurance schemes should be focused on preventive care.

Short- and long-term movement patterns in the freshwater whipray (Himantura dalyensis) determined by the signal processing of passive acoustic telemetry data.

Patterns of movement in aquatic animals reflect ecologically important behaviours. Cyclical changes in the abiotic environment influence these movements, but when multiple processes occur simultaneously, identifying which is responsible for the observed movement can be complex. Here we used acoustic telemetry and signal processing to define the abiotic processes responsible for movement patterns in freshwater whiprays (Himantura dalyensis). Acoustic transmitters were implanted into the whiprays and their movements detected over 12 months by an array of passive acoustic receivers, deployed throughout 64 km of the Wenlock River, Qld, Australia. The time of an individual's arrival and departure from each receiver detection field was used to estimate whipray location continuously throughout the study. This created a linear-movement-waveform for each whipray and signal processing revealed periodic components within the waveform. Correlation of movement periodograms with those from abiotic processes categorically illustrated that the diel cycle dominated the pattern of whipray movement during the wet season, whereas tidal and lunar cycles dominated during the dry season. The study methodology represents a valuable tool for objectively defining the relationship between abiotic processes and the movement patterns of free-ranging aquatic animals and is particularly expedient when periods of no detection exist within the animal location data.

A one-step process for the preparation ofγ-Fe2O3

Abstract is not available.