应用碳、氮稳定同位素研究鄱阳湖枯水末期水生食物网结构

稳定碳、氮同位素比值分析技术是研究生态系统中物质循环与能量流动的有效技术。δ13C值常用来分析消费者食物来源,δ15N值常用来确定生物在食物网中的营养位置。应用稳定同位素技术分析了鄱阳湖北部湖口县、都昌县、星子县、吴城镇4个采样点95条鱼和其他食物网成分样品的碳、氮稳定同位素比值,构建了鄱阳湖枯水期末期水生食物网。结果表明,不同水域颗粒有机物(POM)的δ13C值不同,范围为-27.5‰～-24.6‰可以区分赣江、修水、鄱阳湖、长江和鄱阳湖湖交汇处水体的颗粒有机物特征。江西鄱阳湖国家级自然保护区受人类活动

Direct simulation of turbulent entrainment due to a plume impinging on a density interface

The law for turbulent entrainment due to plumes and jets impinging on a density interface is subject to significant uncertainty, with reported differences in entrainment rates up to a factor of 10. We report preliminary results obtained by Direct Numerical Simulation which are part of a PRACE project on turbulent entrainment carried out on JUGENE at Jülich, Germany. Various interface tracking methods are discussed and the entrainment coefficient is determined.

瓣结鱼食性的研究

以采自贵州境内清水江、都柳江的318尾瓣结鱼(Tor(Foliter)brevifilis brevifilis)为研究对象,从食物组成、摄食强度和摄食形态学等方面研究了瓣结鱼食性的特点。结果表明:瓣结鱼的食物由双翅目昆虫幼虫等17类饵料生物组成,并以双翅目昆虫幼虫的出现率最高。瓣结鱼的充塞度按春、夏、秋、冬季逐渐增高,季节性变化明显。充塞指数随体长生长显著减少,而摄食率则随体长生长逐渐增加。充塞指数和摄食率均以V期性腺个体为最低。瓣结鱼为底层杂食性鱼类。

保定市工业废水对白洋淀微型生物群落的生态毒性

以白洋淀PFU(PolyurethaneFoamUnit)微型生物群落为种源(epicenter),评价上游工业废水的生态毒性.结果表明,在反映原生动物群集过程的3个参数Seq、G和T90%中,Seq与工业废水体积分数(φ)呈负相关.根据其回归方程Seq=42.22857-0.33374φ(R2=0.9042,P<0.01)推算出工业废水的效应浓度EC5、EC20和EC50,分别为6.3%、25.3%和65.2%.以此确定上游工业废水对白洋淀微型生物群落的无效应浓度为6.3%,最大允许浓度(MATC)为2

微囊藻毒素对大鳞副泥鳅胚胎和幼鱼的毒性效应

国家科技部重点项目“滇池蓝藻水华污染控制技术研究”(K99 0 5 35 0 1)资助; 中国科学院武汉分院情报信息中心资助

武汉东湖主要养殖水域的浮游甲壳动物群落分析

报道了 1 994～ 1 996年武汉东湖水果湖、郭郑湖、汤林湖和后湖 4个主要鱼类养殖水域甲壳动物群落结构变化的调查结果。其目的旨在比较 4个湖区甲壳动物群落结构的差异 ,探讨甲壳动物群落变化与鱼类养殖、水生植物及水体富营养化间的关系。结果表明 ,在东湖 、 站 ,类平均密度明显低于 、 站 ( P<0 .0 5 ) ,而近邻剑水蚤在 3个周年里一直占据桡足类的优势地位。 站从 1 995年 , 站从 1 996年起 ,近邻剑水蚤均取代了广布中剑水蚤成为桡足类的第一优势种。甲壳动物的体长频度分布表明

A framework for collecting inclusive design data for the UK population.

Successful inclusive product design requires knowledge about the capabilities, needs and aspirations of potential users and should cater for the different scenarios in which people will use products, systems and services. This should include: the individual at home; in the workplace; for businesses, and for products in these contexts. It needs to reflect the development of theory, tools and techniques as research moves on. And it must also to draw in wider psychological, social, and economic considerations in order to gain a more accurate understanding of users' interactions with products and technology. However, recent research suggests that although a number of national disability surveys have been carried out, no such knowledge currently exists as information to support the design of products, systems and services for heterogeneous users. This paper outlines the strategy behind specific inclusive design research that is aimed at creating the foundations for measuring inclusion in product designs. A key outcome of this future research will be specifying and operationalising capability, and psychological, social and economic context measures for inclusive design. This paper proposes a framework for capturing such information, describes an early pilot study, and makes recommendations for better practice.

The impact of government policy on technology transfer: An aircraft industry case study

This case study explores the interaction between domestic and foreign governmental policy on technology transfer with the goal of exploring the long-term impacts of technology transfer. Specifically, the impact of successive licensing of fighter aircraft manufacturing and design to Japan in the development of Japan's aircraft industry is reviewed. Results indicate Japan has built a domestic aircraft industry through sequential learning with foreign technology transfers from the United States, and design and production on domestic fighter aircraft. This process was facilitated by governmental policies in both Japan and the United States. Published by Elsevier B.V.

Multi scale shape index for 3D object recognition

We present Multi Scale Shape Index (MSSI), a novel feature for 3D object recognition. Inspired by the scale space filtering theory and Shape Index measure proposed by Koenderink & Van Doorn [6], this feature associates different forms of shape, such as umbilics, saddle regions, parabolic regions to a real valued index. This association is useful for representing an object based on its constituent shape forms. We derive closed form scale space equations which computes a characteristic scale at each 3D point in a point cloud without an explicit mesh structure. This characteristic scale is then used to estimate the Shape Index. We quantitatively evaluate the robustness and repeatability of the MSSI feature for varying object scales and changing point cloud density. We also quantify the performance of MSSI for object category recognition on a publicly available dataset. © 2013 Springer-Verlag.

城郊养鱼高产湖塘理化特点及生物相的分析

本文报导 1973年武汉市郊两个渔业高产湖塘的理化、生物环境特点,并分析了各类环境因素间的关系。在养殖季节中,湖水溶氧量通常在7毫克/升以上,总氮平均为2.63毫克/升,总磷平均为0.38毫克/升;浮游植物平均为2,199×10~4-3,080×10~4个/升,主要为硅藻,甲藻和绿藻等小型种类;浮游动物平均为39,200-74,318个/升,以原生动物和轮虫为主。文中提出了各类环境因素间相互关系的方程式,定量地描述了饵料生物丰度和氮、磷的关系。

REDESCRIPTION AND SYSTEMATIC STATUS OF NEOCAPILLARIA PHOXINI YU ET WANG, 1994 (NEMATODA: CAPILLARIIDAE)

Re-examination of the syntypes of the capillariid nematode Neocapillaria phoxini Yu et Wang, 1994, the type species of Neocapillaria Yu et Wang, 1994, described from the intestine of the freshwater fish Phoxinus lagowskii variegatus Gunther (Cyprinidae) from China, confirmed its morphological similarity with species of Freitascapillaria Moravec, 1987, to which it is transferred as Freitascapillaria phoxini (Yu et Wang, 1994) comb. n. Consequently, Neocapillaria Yu et Wang, 1994 (a homonym to Neocapillaria Moravec, 1987) and Sinocapillaria Moravec et Spratt, 1998 become junior synonyms of Freitascapillaria. Skrjabinocapillaria gigantea is transferred to Freitascapillaria as F. gigantea (Wang, 1984) comb. n.

Seasonal changes, life cycle, and production of a psychrophilic chironomid (Propsilocerus akamusi) in a Chinese Lake

Seasonal changes, life cycle, and production of a psychrophilic Chironomidae species, Propsilacerus akamusi (Tokunage), were studied in eutrophic Lake Donghu. The P akamusi population was characterized by a single annual reproduction period during late November to December, and the larval growth mainly occurred in winter. Most of P akamusi were univoltine, while some of them came to emergence in two years or more. The average density and biomass were 318.9 ind./m(2) and 0.57 g dry weight /m(2) during January 1998 to June 2000, respectively, but these values did not include any summer measurement,; since the larvae aestivated in the deep sediment layer and could not be sampled routinely in summer. The annual production of P akamusi was 2.73g dry weight/m(2), and the corresponding production/biomass ratio was 4.60.

Self-organization, embodiment, and biologically inspired robotics.

Robotics researchers increasingly agree that ideas from biology and self-organization can strongly benefit the design of autonomous robots. Biological organisms have evolved to perform and survive in a world characterized by rapid changes, high uncertainty, indefinite richness, and limited availability of information. Industrial robots, in contrast, operate in highly controlled environments with no or very little uncertainty. Although many challenges remain, concepts from biologically inspired (bio-inspired) robotics will eventually enable researchers to engineer machines for the real world that possess at least some of the desirable properties of biological organisms, such as adaptivity, robustness, versatility, and agility.

Intelectin gene from the grass carp Ctenopharyngodon idella: cDNA cloning, tissue expression, and immunohistochemical localization

The cDNA encoding grass carp intelectin was isolated from a head kidney cDNA library, and termed gcIntL. The deduced amino acid sequence of gcIntL consists of 318 amino acids, and about 55% identical and 74% similar to human intelectin, which is a new type of lectin recognizing galactofuranose, and plays a role in the recognition of bacteria-specific components in animal hosts. The gcIntL gene consists of seven exons and six introns, spacing over approximately 3 kb of genomic sequence. Phylogenetic analysis clearly demonstrated that the gcIntL formed a clade with Danio rerio intelectin and 35 kDa serum lectin. By real-time quantitative RT-PCR analysis, gcIntL transcripts were significantly induced in head kidney, trunk kidney, spleen, and intestine from LPS-stimulated fish. RT-PCR and Western blotting analysis demonstrated that the mRNA and protein of gcIntL gene have the same expression pattern, and both were detected in brain, gill, intestine, head kidney, trunk kidney, spleen, and heart. Furthermore, gcIntL protein could be detected in gill, intestine, trunk kidney, head kidney, spleen, heart, and brain including medulla oblongata and optic lobe, as determined by immunohistochemistry. This is the first report of intelectin expression pattern in fish, and of recombinant gcIntL and polyclonal antibody against gcIntL. (c) 2006 Elsevier Ltd. All rights reserved.