A modified structural stress method for fatigue assessment of welded structures

Fatigue life assessment of weldedstructures is commonly based on the nominal stress method, but more flexible and accurate methods have been introduced. In general, the assessment accuracy is improved as more localized information about the weld is incorporated. The structural hot spot stress method includes the influence of macro geometric effects and structural discontinuities on the design stress but excludes the local features of the weld. In this thesis, the limitations of the structural hot spot stress method are discussed and a modified structural stress method with improved accuracy is developed and verified for selected welded details. The fatigue life of structures in the as-welded state consists mainly of crack growth from pre-existing cracks or defects. Crack growth rate depends on crack geometry and the stress state on the crack face plane. This means that the stress level and shape of the stress distribution in the assumed crack path governs thetotal fatigue life. In many structural details the stress distribution is similar and adequate fatigue life estimates can be obtained just by adjusting the stress level based on a single stress value, i.e., the structural hot spot stress. There are, however, cases for which the structural stress approach is less appropriate because the stress distribution differs significantly from the more common cases. Plate edge attachments and plates on elastic foundations are some examples of structures with this type of stress distribution. The importance of fillet weld size and weld load variation on the stress distribution is another central topic in this thesis. Structural hot spot stress determination is generally based on a procedure that involves extrapolation of plate surface stresses. Other possibilities for determining the structural hot spot stress is to extrapolate stresses through the thickness at the weld toe or to use Dong's method which includes through-thickness extrapolation at some distance from the weld toe. Both of these latter methods are less sensitive to the FE mesh used. Structural stress based on surface extrapolation is sensitive to the extrapolation points selected and to the FE mesh used near these points. Rules for proper meshing, however, are well defined and not difficult to apply. To improve the accuracy of the traditional structural hot spot stress, a multi-linear stress distribution is introduced. The magnitude of the weld toe stress after linearization is dependent on the weld size, weld load and plate thickness. Simple equations have been derived by comparing assessment results based on the local linear stress distribution and LEFM based calculations. The proposed method is called the modified structural stress method (MSHS) since the structural hot spot stress (SHS) value is corrected using information on weld size andweld load. The correction procedure is verified using fatigue test results found in the literature. Also, a test case was conducted comparing the proposed method with other local fatigue assessment methods.

Niños "vergonzantes" y "pequeños rojos". La población marginal infantil en la Cataluña interior del primer franquismo

En el imaginario colectivo de la sociedad de posguerra siempre están presentes las duras condiciones de la vida cotidiana. La población infantil fue especialmente sensible a esta situación debido al alto índice de enfermedades infecciosas, el racionamiento dietético y las angustias derivadas del conflicto bélico. En estas condiciones, el Auxilio Social de la Falange fue el encargado de administrar la beneficencia y, a su vez, resocializar la población, en este caso, la infantil, dentro de los valores nacionalsindicalistas y nacionalcatólicos. Ello le permitió no sólo controlar la política social sino también criminalizar a los vencidos en el momento de administrarla. En definitiva, fue uno de los pilares fundamentales en el proceso de construcción del edificio franquista.

Baltia, quae et Scandia, Finningia, Cimbrica Chersonesus (1654) - [Yleisnäkymä - Overview]

S.l. 1654

Conveniencia del abonado y la fertilización en el cultivo de la alfalfa

En este artículo exponemos los resultados de tres años de experimentación en un cultivo de alfalfa con sistema de regadío estival, en el Valle medio del Ebro.El objetivo ha sido comprobar hasta qué punto la utilización de herbicida y de abonado mejora la producción (en materia seca) y la calidad (porcentaje de proteína) en el forraje de alfalfa cultivado.

Baltia, quae et Scandia, Finningia, Cimbrica Chersonesus (1703) - [Yleisnäkymä - Overview]

Amsterdam 1703

Screening for ALK in non-small cell lung carcinomas: 5A4 and D5F3 antibodies perform equally well, but combined use with FISH is recommended.

OBJECTIVES: Immunohistochemistry (IHC) has become a promising method for pre-screening ALK-rearrangements in non-small cell lung carcinomas (NSCLC). Various ALK antibodies, detection systems and automated immunostainers are available. We therefore aimed to compare the performance of the monoclonal 5A4 (Novocastra, Leica) and D5F3 (Cell Signaling, Ventana) antibodies using two different immunostainers. Additionally we analyzed the accuracy of prospective ALK IHC-testing in routine diagnostics. MATERIALS AND METHODS: Seventy-two NSCLC with available ALK FISH results and enriched for FISH-positive carcinomas were retrospectively analyzed. IHC was performed on BenchMarkXT (Ventana) using 5A4 and D5F3, respectively, and additionally with 5A4 on Bond-MAX (Leica). Data from our routine diagnostics on prospective ALK-testing with parallel IHC, using 5A4, and FISH were available from 303 NSCLC. RESULTS: All three IHC protocols showed congruent results. Only 1/25 FISH-positive NSCLC (4%) was false negative by IHC. For all three IHC protocols the sensitivity, specificity, positive (PPV) and negative predictive values (NPV) compared to FISH were 96%, 100%, 100% and 97.8%, respectively. In the prospective cohort 3/32 FISH-positive (9.4%) and 2/271 FISH-negative (0.7%) NSCLC were false negative and false positive by IHC, respectively. In routine diagnostics the sensitivity, specificity, PPV and NPV of IHC compared to FISH were 90.6%, 99.3%, 93.5% and 98.9%, respectively. CONCLUSIONS: 5A4 and D5F3 are equally well suited for detecting ALK-rearranged NSCLC. BenchMark and BOND-MAX immunostainers can be used for IHC with 5A4. True discrepancies between IHC and FISH results do exist and need to be addressed when implementing IHC in an ALK-testing algorithm.

Embolic Strokes of Undetermined Source in the Athens Stroke Registry: an Outcome Analysis.

BACKGROUND AND PURPOSE: Information about outcomes in Embolic Stroke of Undetermined Source (ESUS) patients is unavailable. This study provides a detailed analysis of outcomes of a large ESUS population. METHODS: Data set was derived from the Athens Stroke Registry. ESUS was defined according to the Cryptogenic Stroke/ESUS International Working Group criteria. End points were mortality, stroke recurrence, functional outcome, and a composite cardiovascular end point comprising recurrent stroke, myocardial infarction, aortic aneurysm rupture, systemic embolism, or sudden cardiac death. We performed Kaplan-Meier analyses to estimate cumulative probabilities of outcomes by stroke type and Cox-regression to investigate whether stroke type was outcome predictor. RESULTS: 2731 patients were followed-up for a mean of 30.5±24.1months. There were 73 (26.5%) deaths, 60 (21.8%) recurrences, and 78 (28.4%) composite cardiovascular end points in the 275 ESUS patients. The cumulative probability of survival in ESUS was 65.6% (95% confidence intervals [CI], 58.9%-72.2%), significantly higher compared with cardioembolic stroke (38.8%, 95% CI, 34.9%-42.7%). The cumulative probability of stroke recurrence in ESUS was 29.0% (95% CI, 22.3%-35.7%), similar to cardioembolic strokes (26.8%, 95% CI, 22.1%-31.5%), but significantly higher compared with all types of noncardioembolic stroke. One hundred seventy-two (62.5%) ESUS patients had favorable functional outcome compared with 280 (32.2%) in cardioembolic and 303 (60.9%) in large-artery atherosclerotic. ESUS patients had similar risk of composite cardiovascular end point as all other stroke types, with the exception of lacunar strokes, which had significantly lower risk (adjusted hazard ratio, 0.70 [95% CI, 0.52-0.94]). CONCLUSIONS: Long-term mortality risk in ESUS is lower compared with cardioembolic strokes, despite similar rates of recurrence and composite cardiovascular end point. Recurrent stroke risk is higher in ESUS than in noncardioembolic strokes.

Les Contes du Monte-Cristo. Alexandre Dumas and His "Tales for Old and Young Children"

Between 1857 and 1859 Alexandre Dumas published eleven tales from the Brothers Grimm and Hans Christian Andersen's collections in his magazine Le Monte-Cristo. The texts have a particular status, between translation and rewriting. Dumas includes them in a causerie (chat) with the readers of his magazine, and they are framed in a story where an adult tells tales to children. This results in several modifications of the originals-such as the addition of explicative comments-which I study through a comparison of "Petit-Jean et Gros-Jean" and Andersen's "Little Claus and Big Claus." Underrated and forgotten, Dumas's tales are nonetheless representative of his particular style and bear witness to his storytelling skills. They also show similarities between Dumas and Andersen, who actually became acquainted in Paris in 1843.

AGNs and microquasars as high-energy gamma-ray sources

The possible associations between the microquasars LS 5039 and LS I +61 303 and the EGRET sources 3EG J1824-1514 and 3EG J0241+6103 suggest that microquasars could also be sources of high-energy gamma-rays. In this work, we present a detailed numerical inverse Compton (IC) model, based on a microquasar scenario, that reproduces the high-energy gamma-ray spectra and variability observed by EGRET for the mentioned sources. Our model considers a population of relativistic electrons entrained in a cylindrical inhomogeneous jet that interact through IC scattering with both the radiation and the magnetic fields.

Rockfall susceptibility assessment and remote geological mapping with LiDAR point clouds

Characterizing the geological features and structures in three dimensions over inaccessible rock cliffs is needed to assess natural hazards such as rockfalls and rockslides and also to perform investigations aimed at mapping geological contacts and building stratigraphy and fold models. Indeed, the detailed 3D data, such as LiDAR point clouds, allow to study accurately the hazard processes and the structure of geologic features, in particular in vertical and overhanging rock slopes. Thus, 3D geological models have a great potential of being applied to a wide range of geological investigations both in research and applied geology projects, such as mines, tunnels and reservoirs. Recent development of ground-based remote sensing techniques (LiDAR, photogrammetry and multispectral / hyperspectral images) are revolutionizing the acquisition of morphological and geological information. As a consequence, there is a great potential for improving the modeling of geological bodies as well as failure mechanisms and stability conditions by integrating detailed remote data. During the past ten years several large rockfall events occurred along important transportation corridors where millions of people travel every year (Switzerland: Gotthard motorway and railway; Canada: Sea to sky highway between Vancouver and Whistler). These events show that there is still a lack of knowledge concerning the detection of potential rockfalls, making mountain residential settlements and roads highly risky. It is necessary to understand the main factors that destabilize rocky outcrops even if inventories are lacking and if no clear morphological evidences of rockfall activity are observed. In order to increase the possibilities of forecasting potential future landslides, it is crucial to understand the evolution of rock slope stability. Defining the areas theoretically most prone to rockfalls can be particularly useful to simulate trajectory profiles and to generate hazard maps, which are the basis for land use planning in mountainous regions. The most important questions to address in order to assess rockfall hazard are: Where are the most probable sources for future rockfalls located? What are the frequencies of occurrence of these rockfalls? I characterized the fracturing patterns in the field and with LiDAR point clouds. Afterwards, I developed a model to compute the failure mechanisms on terrestrial point clouds in order to assess the susceptibility to rockfalls at the cliff scale. Similar procedures were already available to evaluate the susceptibility to rockfalls based on aerial digital elevation models. This new model gives the possibility to detect the most susceptible rockfall sources with unprecented detail in the vertical and overhanging areas. The results of the computation of the most probable rockfall source areas in granitic cliffs of Yosemite Valley and Mont-Blanc massif were then compared to the inventoried rockfall events to validate the calculation methods. Yosemite Valley was chosen as a test area because it has a particularly strong rockfall activity (about one rockfall every week) which leads to a high rockfall hazard. The west face of the Dru was also chosen for the relevant rockfall activity and especially because it was affected by some of the largest rockfalls that occurred in the Alps during the last 10 years. Moreover, both areas were suitable because of their huge vertical and overhanging cliffs that are difficult to study with classical methods. Limit equilibrium models have been applied to several case studies to evaluate the effects of different parameters on the stability of rockslope areas. The impact of the degradation of rockbridges on the stability of large compartments in the west face of the Dru was assessed using finite element modeling. In particular I conducted a back-analysis of the large rockfall event of 2005 (265'000 m3) by integrating field observations of joint conditions, characteristics of fracturing pattern and results of geomechanical tests on the intact rock. These analyses improved our understanding of the factors that influence the stability of rock compartments and were used to define the most probable future rockfall volumes at the Dru. Terrestrial laser scanning point clouds were also successfully employed to perform geological mapping in 3D, using the intensity of the backscattered signal. Another technique to obtain vertical geological maps is combining triangulated TLS mesh with 2D geological maps. At El Capitan (Yosemite Valley) we built a georeferenced vertical map of the main plutonio rocks that was used to investigate the reasons for preferential rockwall retreat rate. Additional efforts to characterize the erosion rate were made at Monte Generoso (Ticino, southern Switzerland) where I attempted to improve the estimation of long term erosion by taking into account also the volumes of the unstable rock compartments. Eventually, the following points summarize the main out puts of my research: The new model to compute the failure mechanisms and the rockfall susceptibility with 3D point clouds allows to define accurately the most probable rockfall source areas at the cliff scale. The analysis of the rockbridges at the Dru shows the potential of integrating detailed measurements of the fractures in geomechanical models of rockmass stability. The correction of the LiDAR intensity signal gives the possibility to classify a point cloud according to the rock type and then use this information to model complex geologic structures. The integration of these results, on rockmass fracturing and composition, with existing methods can improve rockfall hazard assessments and enhance the interpretation of the evolution of steep rockslopes. -- La caractérisation de la géologie en 3D pour des parois rocheuses inaccessibles est une étape nécessaire pour évaluer les dangers naturels tels que chutes de blocs et glissements rocheux, mais aussi pour réaliser des modèles stratigraphiques ou de structures plissées. Les modèles géologiques 3D ont un grand potentiel pour être appliqués dans une vaste gamme de travaux géologiques dans le domaine de la recherche, mais aussi dans des projets appliqués comme les mines, les tunnels ou les réservoirs. Les développements récents des outils de télédétection terrestre (LiDAR, photogrammétrie et imagerie multispectrale / hyperspectrale) sont en train de révolutionner l'acquisition d'informations géomorphologiques et géologiques. Par conséquence, il y a un grand potentiel d'amélioration pour la modélisation d'objets géologiques, ainsi que des mécanismes de rupture et des conditions de stabilité, en intégrant des données détaillées acquises à distance. Pour augmenter les possibilités de prévoir les éboulements futurs, il est fondamental de comprendre l'évolution actuelle de la stabilité des parois rocheuses. Définir les zones qui sont théoriquement plus propices aux chutes de blocs peut être très utile pour simuler les trajectoires de propagation des blocs et pour réaliser des cartes de danger, qui constituent la base de l'aménagement du territoire dans les régions de montagne. Les questions plus importantes à résoudre pour estimer le danger de chutes de blocs sont : Où se situent les sources plus probables pour les chutes de blocs et éboulement futurs ? Avec quelle fréquence vont se produire ces événements ? Donc, j'ai caractérisé les réseaux de fractures sur le terrain et avec des nuages de points LiDAR. Ensuite, j'ai développé un modèle pour calculer les mécanismes de rupture directement sur les nuages de points pour pouvoir évaluer la susceptibilité au déclenchement de chutes de blocs à l'échelle de la paroi. Les zones sources de chutes de blocs les plus probables dans les parois granitiques de la vallée de Yosemite et du massif du Mont-Blanc ont été calculées et ensuite comparés aux inventaires des événements pour vérifier les méthodes. Des modèles d'équilibre limite ont été appliqués à plusieurs cas d'études pour évaluer les effets de différents paramètres sur la stabilité des parois. L'impact de la dégradation des ponts rocheux sur la stabilité de grands compartiments de roche dans la paroi ouest du Petit Dru a été évalué en utilisant la modélisation par éléments finis. En particulier j'ai analysé le grand éboulement de 2005 (265'000 m3), qui a emporté l'entier du pilier sud-ouest. Dans le modèle j'ai intégré des observations des conditions des joints, les caractéristiques du réseau de fractures et les résultats de tests géoméchaniques sur la roche intacte. Ces analyses ont amélioré l'estimation des paramètres qui influencent la stabilité des compartiments rocheux et ont servi pour définir des volumes probables pour des éboulements futurs. Les nuages de points obtenus avec le scanner laser terrestre ont été utilisés avec succès aussi pour produire des cartes géologiques en 3D, en utilisant l'intensité du signal réfléchi. Une autre technique pour obtenir des cartes géologiques des zones verticales consiste à combiner un maillage LiDAR avec une carte géologique en 2D. A El Capitan (Yosemite Valley) nous avons pu géoréferencer une carte verticale des principales roches plutoniques que j'ai utilisé ensuite pour étudier les raisons d'une érosion préférentielle de certaines zones de la paroi. D'autres efforts pour quantifier le taux d'érosion ont été effectués au Monte Generoso (Ticino, Suisse) où j'ai essayé d'améliorer l'estimation de l'érosion au long terme en prenant en compte les volumes des compartiments rocheux instables. L'intégration de ces résultats, sur la fracturation et la composition de l'amas rocheux, avec les méthodes existantes permet d'améliorer la prise en compte de l'aléa chute de pierres et éboulements et augmente les possibilités d'interprétation de l'évolution des parois rocheuses.

Dynamique du peuplement et activités agro-pastorales durant l’âge du Bronze dans les massifs du haut Champsaur et de l’Argentiérois

Des programmes de recherche pluridisciplinaires sur l’occupation du sol et le pastoralisme de la Préhistoire au Moyen Âge dans le sud du massif alpin sont menés, depuis 1998, sur les massifs du Haut Champsaur, de Freissinières et de l’Argentièrois (Hautes-Alpes). Des dix phases d’occupation et d'activité agropastorale mises en évidence (prospections pédestres et fouilles), entre 1600 et 2700 m d’altitude, trois se distinguent: la fin du Néolithique, l’âge du Bronze et la période médiévale. Au travers des premières données archéologiques et environnementales, cet article présente, depuis le milieu du IIIe millénaire au début du Ier millénaire, les grandes caractéristiques de l’occupation du sol mais aussi l’originalité et l’importance de l’activité humaine dans cette zone alpine. La fin du Néolithique et l’âge du Bronze correspondent à une multiplication des gisements archéologiques marquant de façon évidente une rupture dans la gestion de l'espace montagnard. Les paysages sont largement façonnés par les activités humaines et l’entretien des terres cultivées, des prairies et des alpages, paraît continu. À la lumière des données de terrain, l’une des évolutions qui apparaît sur les sites d’altitude durant cette période concerne l’apparition de structures pastorales bâties entre 2 067 et 2 303 m d’altitude (datation 14C).

Impaired aldehyde dehydrogenase 1 subfamily member 2A-dependent retinoic acid signaling is related with a mesenchymal-like phenotype and an unfavorable prognosis of head and neck squamous cell carcinoma.

BACKGROUND: An inverse correlation between expression of the aldehyde dehydrogenase 1 subfamily A2 (ALDH1A2) and gene promoter methylation has been identified as a common feature of oropharyngeal squamous cell carcinoma (OPSCC). Moreover, low ALDH1A2 expression was associated with an unfavorable prognosis of OPSCC patients, however the causal link between reduced ALDH1A2 function and treatment failure has not been addressed so far. METHODS: Serial sections from tissue microarrays of patients with primary OPSCC (n = 101) were stained by immunohistochemistry for key regulators of retinoic acid (RA) signaling, including ALDH1A2. Survival with respect to these regulators was investigated by univariate Kaplan-Meier analysis and multivariate Cox regression proportional hazard models. The impact of ALDH1A2-RAR signaling on tumor-relevant processes was addressed in established tumor cell lines and in an orthotopic mouse xenograft model. RESULTS: Immunohistochemical analysis showed an improved prognosis of ALDH1A2(high) OPSCC only in the presence of CRABP2, an intracellular RA transporter. Moreover, an ALDH1A2(high)CRABP2(high) staining pattern served as an independent predictor for progression-free (HR: 0.395, p = 0.007) and overall survival (HR: 0.303, p = 0.002), suggesting a critical impact of RA metabolism and signaling on clinical outcome. Functionally, ALDH1A2 expression and activity in tumor cell lines were related to RA levels. While administration of retinoids inhibited clonogenic growth and proliferation, the pharmacological inhibition of ALDH1A2-RAR signaling resulted in loss of cell-cell adhesion and a mesenchymal-like phenotype. Xenograft tumors derived from FaDu cells with stable silencing of ALDH1A2 and primary tumors from OPSCC patients with low ALDH1A2 expression exhibited a mesenchymal-like phenotype characterized by vimentin expression. CONCLUSIONS: This study has unraveled a critical role of ALDH1A2-RAR signaling in the pathogenesis of head and neck cancer and our data implicate that patients with ALDH1A2(low) tumors might benefit from adjuvant treatment with retinoids.

Conocimiento y satisfacción de la aprobación de la prescripción enfermera (Ley 28/2009) en enfermeras de formación máster y especialidad de la Universidad de Barcelona

Objetivo: Identificar el nivel de conocimiento, satisfacción y capacitación de las enfermeras con relación a la prescripción enfermera tras la aprobación de la Ley 28/2009. Método: Estudio observacional descriptivo transversal realizado en la Escuela de Enfermería de la Universidad de Barcelona. Los sujetos a estudio fueron 485 enfermeras en formación máster o especialización y docentes de dicha escuela. Las variables principales de estudio fueron: satisfacción, conocimiento e información de la aprobación de la Ley, conocimiento de los elementos autorizados a prescribir, percepción de capacidad prescriptora de las enfermeras y opinión de la necesidad formativa e informativa respecto a la Ley. Como secundarias: años de experiencia profesional, ámbito laboral, curso formativo y sociodemográficas. La recogida de datos se realizó entre los meses de marzo y abril de 2010 mediante un cuestionario autoaplicable ad hoc de 29 ítems, probado previamente. Resultados: Participaron 345 enfermeras, el 87,2% (301) alumnas en formación máster. El 72,3% (238) de las enfermeras conocían la aprobación de la ley, pero un 95,9% (303) indicó tener insuficiente información. La satisfacción media con la aprobación de la Ley se situó en 6,24 ± 2,08. El 57,6% (189) de las enfermeras opinaron estar capacitadas para prescribir productos sanitarios y un 41,3% (134), para prescribir fármacos. Conclusiones: Hay satisfacción con la aprobación de la Ley 28/2009. Actualmente muchas enfermeras prescriben productos farmacológicos y sanitarios de forma autónoma.