Gender and media: where do we stand today?

Nowadays, the public discourses about gender equality are commonly accepted in Western society. In fact, we live in an era of “equality illusion” (Banyard, 2010) because the mainstream discourses incorporate gender in the agenda, conveying the message that feminist struggles are unnecessary today. At the same time, postfeminism (McRobbie, 2004) gains importance and demonstrates the intricacies of a neoliberal, highly individualist culture that subtly imprisons the freedoms that it is supposed to grant (Gill & Scharff, 2011). However, back in 1978, Gaye Tuchman used the expression “symbolic annihilation” to refer to how the media represented women. The author refers to a “symbolic annihilation” because sometimes it is so hidden and subtle that it becomes difficult to perceive – and to be fought. Much has improved since then; yet a lot remains the same. Over the past decades there have been marked changes in gender relations, in feminist activism, in the (media) communication industry and in society in general (Byerly, 2013; Carter, Steiner & McLaughlin, 2015; Gallagher, 2014; Gallego, 2013; Krijnen, Álvares & Van Bauwel, 2011; Krijnen & Van Bauwel, 2015; Lobo, Silveirinha, Subtil, & Torres, 2015; Ross, 2009; Silveirinha, 2001; Van Zoonen, 1994, 2010). Now, in a globalised and media saturated world, the gendered picture is, consequently, different. The contemporary grammar is marked by diverse and complex tensions (van Zoonen, 2010).

Contribution of Doppler echocardiography to the evaluation of systolic and diastolic function of obese women versus a control group

OBJECTIVE: To study by doppler echocardiography the cardiac systolic and diastolic functions of health, uncomplicated obese subjects. METHODS: Fifty-nine obese women with an average body mass index (BMI) of 35 kg/m² were evaluated and compared with 19 subjects with an average BMI of 23 kg/m² (control group). RESULTS: In the obese group, a clear tendency was observed toward higher systolic pressure, increased wall thickness and, consequently, myocardial mass, elevation on the circumference stress of the left ventricular wall, and an indisputable presence of diastolic abnormalities. Filling abnormalities were observed with impaired relaxation, with prolonged isovolumic relaxation time (IVRT) and augmented atrium contribution representing early indexes of cardiac dysfunction when systolic performance is still normal. CONCLUSION: Obesity is generally a chronic condition, and doppler echocardiography can be used as a noninvasive instrument for early evaluation of left ventricular diastolic indexes.

Beeswax organogels: Influence of gelator concentration and oil type in the gelation process

This work focused on how different types of oil phase, MCT (medium chain triglycerides) and LCT (long chain triglycerides), exert influence on the gelation process of beeswax and thus properties of the organogel produced thereof. Organogels were produced at different temperatures and qualitative phase diagrams were constructed to identify and classify the type of structure formed at various compositions. The microstructure of gelator crystals was studied by polarized light microscopy. Melting and crystallization were characterized by differential scanning calorimetry and rheology (flow and small amplitude oscillatory measurements) to understand organogels' behaviour under different mechanical and thermal conditions. FTIR analysis was employed for a further understanding of oil-gelator chemical interactions. Results showed that the increase of beeswax concentration led to higher values of storage and loss moduli (G, G) and complex modulus (G*) of organogels, which is associated to the strong network formed between the crystalline gelator structure and the oil phase. Crystallization occurred in two steps (well evidenced for higher concentrations of gelator) during temperature decreasing. Thermal analysis showed the occurrence of hysteresis between melting and crystallization. Small angle X-ray scattering (SAXS) analysis allowed a better understanding in terms of how crystal conformations were disposed for each type of organogel. The structuring process supported by medium or long-chain triglycerides oils was an important exploit to apprehend the impact of different carbon chain-size on the gelation process and on gels' properties.

Treatment of Dyslipidemia with Statins and Physical Exercises: Recent Findings of Skeletal Muscle Responses

Statin treatment in association with physical exercise practice can substantially reduce cardiovascular mortality risk of dyslipidemic individuals, but this practice is associated with myopathic event exacerbation. This study aimed to present the most recent results of specific literature about the effects of statins and its association with physical exercise on skeletal musculature. Thus, a literature review was performed using PubMed and SciELO databases, through the combination of the keywords “statin” AND “exercise” AND “muscle”, restricting the selection to original studies published between January 1990 and November 2013. Sixteen studies evaluating the effects of statins in association with acute or chronic exercises on skeletal muscle were analyzed. Study results indicate that athletes using statins can experience deleterious effects on skeletal muscle, as the exacerbation of skeletal muscle injuries are more frequent with intense training or acute eccentric and strenuous exercises. Moderate physical training, in turn, when associated to statins does not increase creatine kinase levels or pain reports, but improves muscle and metabolic functions as a consequence of training. Therefore, it is suggested that dyslipidemic patients undergoing statin treatment should be exposed to moderate aerobic training in combination to resistance exercises three times a week, and the provision of physical training prior to drug administration is desirable, whenever possible.

Dois teoremas sôbre a função gama

This paper proves the following theorems on the gamma function: Theorem I The integral ∫O∞ t u e-t dt = Γ ( u + 1 ) , where u, real or complex, is such that R (u) > -1, will not change its value if we substitute z = Q (cos φ + i sen φ) for the real variable t, being jconstant and such that - Π/2 < φ < Π/2 , Theorem II The integral ∫-∞∞ w2u + 1 e -w² dw = Γ ( u + 1 ) , where 2u + 1 is supposed to be a non negative even integer, will not change its value if we substitute z = w + fi, f being a real constant, for the real variable w. The proof of both theorems is obtained by means of the well known Cauchy theorem on contour integrals on the complex plane, as suggested by CRAMÉR (1, p. 126) and LEVY (3, p. 178).

Between specialization and globalization. The marketing of agrarian products and its environmental impacts seen from a historical perspective: the province of Barcelona in the mid-nineteenth century

Ecological economics has five good reasons to consider that economic globalisation, spurred by commercial and financial fluxes, to be one of the main driving forces responsible for causing environmental degradation to our planet. The first, is the energy consumption and the socio-environmental impacts which long-distance haulage entails. The second, is the ever-increasing flow of goods to far-away destinations which renders their recycling practically impossible. This is particularly significant, because it prevents the metabolic lock of the nutrients present in food and other agrarian products from taking place. The third, is that the high degree of specialization attained in agriculture, forestry, cattle, mining and industry in each region, generates deleterious effects not only on the eco-landscape structure of the uses of the soil, but on the capability to provide habitat and environmental functions to maintain biodiversity as well

Chebyshev polynomial approximation to approximate partial differential equations

This paper suggests a simple method based on Chebyshev approximation at Chebyshev nodes to approximate partial differential equations. The methodology simply consists in determining the value function by using a set of nodes and basis functions. We provide two examples. Pricing an European option and determining the best policy for chatting down a machinery. The suggested method is flexible, easy to program and efficient. It is also applicable in other fields, providing efficient solutions to complex systems of partial differential equations.

Relations of the job demands-control-support model of job strain with personality attributes : a cross-cultural study in Switzerland and South Africa

Among the various work stress models, one of the most popular to date is the job demands-­‐control (JDC) model developed by Karasek (1979), which postulates that work-­‐related strain will be the highest under work conditions characterized by high demands and low autonomy. The absence of social support at work will further increase negative outcomes. However, this model does not apply equally to all individuals and to all cultures. In the following studies, we assessed work characteristics, personality traits, culture-­‐driven individual attributes, and work-­‐related health outcomes, through the administration of questionnaires. The samples consist of Swiss (n = 622) and South African (n = 879) service-­‐oriented employees (from health, finance, education and commerce sectors) and aged from 18 to 65 years old. Results generally confirm the universal contribution of high psychological demands, low decision latitude and low supervisor support at work, as well as high neuroticism predict the worse health outcomes among employees in both countries. Furthermore, low neuroticism plays a moderating role between psychological demands and burnout, while high openness and high conscientiousness each play a moderating role between decision latitude and burnout in South Africa. Results also reveal that culture-­‐driven individual attributes play a role in both countries, but in a unique manner and according to the ethnic group of belonging. Given that organizations are increasingly characterized with multicultural employees as well as increasingly adverse and complex job conditions, our results help in identifying more updated and refined dynamics that are key between the employee and the work environment in today's context. -- L'un des modèles sur le stress au travail des plus répandus est celui développé par Karasek (1979), qui postule qu'une mauvaise santé chez les employés résulte d'une combinaison de demandes psychologiques élevées, d'une latitude décisionnelle faible et de l'absence de soutien social au travail. Néanmoins, ce modèle ne s'applique pas de façon équivalente chez tous les individus et dans toutes les cultures. Dans les études présentées, nous avons mesuré les caractéristiques de travail, les traits de personnalité, les traits culturels et les effets lies à la santé à l'aide de questionnaires. L'échantillon provient de la Suisse (n = 622) et de l'Afrique du Sud (n = 879) et comprend des employés de domaines divers en lien avec le service (notamment des secteurs de la santé, finance, éducation et commerce) tous âgés entre 18 et 65 ans. Les résultats confirment l'universalité des effets directs des demandes au travail, la latitude décisionnelle faible, le soutien social faible provenant du supérieur hiérarchique, ainsi que le névrosisme élevé qui contribuent à un niveau de santé faible au travail, et ce, dans les deux pays. De plus, un niveau faible de névrosisme a un effet de modération entre les demandes au travail et l'épuisement professionnel, alors que l'ouverture élevée et le caractère consciencieux élevé modèrent la relation entre la latitude décisionnelle et l'épuisement professionnel en Afrique du Sud. Nous avons aussi trouvé que les traits culturels jouent un rôle dans les deux pays, mais de façon unique et en fonction du groupe ethnique d'appartenance. Sachant que les organisations sont de plus en plus caractérisées par des employés d'origine ethnique variées, et que les conditions de travail se complexifient, nos résultats contribuent à mieux comprendre les dynamiques entre l'employé et l'environnement de travail contemporain. personnalité, différences individuelles, comparaisons culturelles, culture, stress au travail, épuisement professionnel, santé des employés.

Generating controlled image sets in cognitive neuroscience research.

The investigation of perceptual and cognitive functions with non-invasive brain imaging methods critically depends on the careful selection of stimuli for use in experiments. For example, it must be verified that any observed effects follow from the parameter of interest (e.g. semantic category) rather than other low-level physical features (e.g. luminance, or spectral properties). Otherwise, interpretation of results is confounded. Often, researchers circumvent this issue by including additional control conditions or tasks, both of which are flawed and also prolong experiments. Here, we present some new approaches for controlling classes of stimuli intended for use in cognitive neuroscience, however these methods can be readily extrapolated to other applications and stimulus modalities. Our approach is comprised of two levels. The first level aims at equalizing individual stimuli in terms of their mean luminance. Each data point in the stimulus is adjusted to a standardized value based on a standard value across the stimulus battery. The second level analyzes two populations of stimuli along their spectral properties (i.e. spatial frequency) using a dissimilarity metric that equals the root mean square of the distance between two populations of objects as a function of spatial frequency along x- and y-dimensions of the image. Randomized permutations are used to obtain a minimal value between the populations to minimize, in a completely data-driven manner, the spectral differences between image sets. While another paper in this issue applies these methods in the case of acoustic stimuli (Aeschlimann et al., Brain Topogr 2008), we illustrate this approach here in detail for complex visual stimuli.

A critical analysis of dimensions and curve fitting practice in economics

When dealing with sustainability we are concerned with the biophysical as well as the monetary aspects of economic and ecological interactions. This multidimensional approach requires that special attention is given to dimensional issues in relation to curve fitting practice in economics. Unfortunately, many empirical and theoretical studies in economics, as well as in ecological economics, apply dimensional numbers in exponential or logarithmic functions. We show that it is an analytical error to put a dimensional unit x into exponential functions ( a x ) and logarithmic functions ( x a log ). Secondly, we investigate the conditions of data sets under which a particular logarithmic specification is superior to the usual regression specification. This analysis shows that logarithmic specification superiority in terms of least square norm is heavily dependent on the available data set. The last section deals with economists’ “curve fitting fetishism”. We propose that a distinction be made between curve fitting over past observations and the development of a theoretical or empirical law capable of maintaining its fitting power for any future observations. Finally we conclude this paper with several epistemological issues in relation to dimensions and curve fitting practice in economics

Towards the validation of "in silico" models and physicochemical filters to identify and characterize new chemical entities

Summary: Lipophilicity plays an important role in the determination and the comprehension of the pharmacokinetic behavior of drugs. It is usually expressed by the partition coefficient (log P) in the n-octanol/water system. The use of an additional solvent system (1,2-dichlorethane/water) is necessary to obtain complementary information, as the log Poct values alone are not sufficient to explain ail biological properties. The aim of this thesis is to develop tools allowing to predict lipophilicity of new drugs and to analyze the information yielded by those log P values. Part I presents the development of theoretical models used to predict lipophilicity. Chapter 2 shows the necessity to extend the existing solvatochromic analyses in order to predict correctly the lipophilicity of new and complex neutral compounds. In Chapter 3, solvatochromic analyses are used to develop a model for the prediction of the lipophilicity of ions. A global model was obtained allowing to estimate the lipophilicity of neutral, anionic and cationic solutes. Part II presents the detailed study of two physicochemical filters. Chapter 4 shows that the Discovery RP Amide C16 stationary phase allows to estimate lipophilicity of the neutral form of basic and acidic solutes, except of lipophilic acidic solutes. Those solutes present additional interactions with this particular stationary phase. In Chapter 5, 4 different IANI stationary phases are investigated. For neutral solutes, linear data are obtained whatever the IANI column used. For the ionized solutes, their retention is due to a balance of electrostatic and hydrophobie interactions. Thus no discrimination is observed between different series of solutes bearing the same charge, from one column to an other. Part III presents two examples illustrating the information obtained thanks to Structure-Properties Relationships (SPR). Comparing graphically lipophilicity values obtained in two different solvent systems allows to reveal the presence of intramolecular effects .such as internai H-bond (Chapter 6). SPR is used to study the partitioning of ionizable groups encountered in Medicinal Chemistry (Chapter7). Résumé La lipophilie joue un .rôle important dans la détermination et la compréhension du comportement pharmacocinétique des médicaments. Elle est généralement exprimée par le coefficient de partage (log P) d'un composé dans le système de solvants n-octanol/eau. L'utilisation d'un deuxième système de solvants (1,2-dichloroéthane/eau) s'est avérée nécessaire afin d'obtenir des informations complémentaires, les valeurs de log Poct seules n'étant pas suffisantes pour expliquer toutes les propriétés biologiques. Le but de cette thèse est de développer des outils permettant de prédire la lipophilie de nouveaux candidats médicaments et d'analyser l'information fournie par les valeurs de log P. La Partie I présente le développement de modèles théoriques utilisés pour prédire la lipophilie. Le chapitre 2 montre la nécessité de mettre à jour les analyses solvatochromiques existantes mais inadaptées à la prédiction de la lipophilie de nouveaux composés neutres. Dans le chapitre 3, la même méthodologie des analyses solvatochromiques est utilisée pour développer un modèle permettant de prédire la lipophilie des ions. Le modèle global obtenu permet la prédiction de la lipophilie de composés neutres, anioniques et cationiques. La Partie II présente l'étude approfondie de deux filtres physicochimiques. Le Chapitre 4 montre que la phase stationnaire Discovery RP Amide C16 permet la détermination de la lipophilie de la forme neutre de composés basiques et acides, à l'exception des acides très lipophiles. Ces derniers présentent des interactions supplémentaires avec cette phase stationnaire. Dans le Chapitre 5, 4 phases stationnaires IAM sont étudiées. Pour les composés neutres étudiés, des valeurs de rétention linéaires sont obtenues, quelque que soit la colonne IAM utilisée. Pour les composés ionisables, leur rétention est due à une balance entre des interactions électrostatiques et hydrophobes. Donc aucune discrimination n'est observée entre les différentes séries de composés portant la même charge d'une colonne à l'autre. La Partie III présente deux exemples illustrant les informations obtenues par l'utilisation des relations structures-propriétés. Comparer graphiquement la lipophilie mesurée dans deux différents systèmes de solvants permet de mettre en évidence la présence d'effets intramoléculaires tels que les liaisons hydrogène intramoléculaires (Chapitre 6). Cette approche des relations structures-propriétés est aussi appliquée à l'étude du partage de fonctions ionisables rencontrées en Chimie Thérapeutique (Chapitre 7) Résumé large public Pour exercer son effet thérapeutique, un médicament doit atteindre son site d'action en quantité suffisante. La quantité effective de médicament atteignant le site d'action dépend du nombre d'interactions entre le médicament et de nombreux constituants de l'organisme comme, par exemple, les enzymes du métabolisme ou les membranes biologiques. Le passage du médicament à travers ces membranes, appelé perméation, est un paramètre important à optimiser pour développer des médicaments plus puissants. La lipophilie joue un rôle clé dans la compréhension de la perméation passive des médicaments. La lipophilie est généralement exprimée par le coefficient de partage (log P) dans le système de solvants (non miscibles) n-octanol/eau. Les valeurs de log Poct seules se sont avérées insuffisantes pour expliquer la perméation à travers toutes les différentes membranes biologiques du corps humain. L'utilisation d'un système de solvants additionnel (le système 1,2-dichloroéthane/eau) a permis d'obtenir les informations complémentaires indispensables à une bonne compréhension du processus de perméation. Un grand nombre d'outils expérimentaux et théoriques sont à disposition pour étudier la lipophilie. Ce travail de thèse se focalise principalement sur le développement ou l'amélioration de certains de ces outils pour permettre leur application à un champ plus large de composés. Voici une brève description de deux de ces outils: 1)La factorisation de la lipophilie en fonction de certaines propriétés structurelles (telle que le volume) propres aux composés permet de développer des modèles théoriques utilisables pour la prédiction de la lipophilie de nouveaux composés ou médicaments. Cette approche est appliquée à l'analyse de la lipophilie de composés neutres ainsi qu'à la lipophilie de composés chargés. 2)La chromatographie liquide à haute pression sur phase inverse (RP-HPLC) est une méthode couramment utilisée pour la détermination expérimentale des valeurs de log Poct.

The Academic Work and Careers in Europe : Trends, Challenges, Perspectives

This book explores the perceptions of academic staff and representatives of institutional leadership about the changes in academic careers and academic work experienced in recent years. It emphasizes standardization and differentiation of academic career paths, impact of new forms of quality management on academic work, changes in recruitment, employment and working conditions, and academics' perceptions of their professional contexts. The book demonstrates a growing diversity within the academic profession and new professional roles inhabiting a space which is neither located in the core business of teaching and research nor at the top level management and leadership. The new higher education professionals tend to be important change agents within the higher education institutions not only fulfilling service and bridging functions but also streamlining academic work to make a contribution to the reputation and competitiveness of the institutions as a whole. Based on interviews with academic staff, this book explores the situation in eight European countries: Austria, Croatia, Finland, Germany, Ireland, Romania, and Switzerland.

Peroxisome proliferator-activated receptors: insight into multiple cellular functions.

Peroxisome proliferator-activated receptors, PPARs, (NR1C) are nuclear hormone receptors implicated in energy homeostasis. Upon activation, these ligand-inducible transcription factors stimulate gene expression by binding to the promoter of target genes. The different structural domains of PPARs are presented in terms of activation mechanisms, namely ligand binding, phosphorylation, and cofactor interaction. The specificity of ligands, such as fatty acids, eicosanoids, fibrates and thiazolidinediones (TZD), is described for each of the three PPAR isotypes, alpha (NR1C1), beta (NR1C2) and gamma (NR1C3), so as the differential tissue distribution of these isotypes. Finally, general and specific functions of the PPAR isotypes are discussed, namely their implication in the control of inflammatory responses, cell proliferation and differentiation, the roles of PPARalpha in fatty acid catabolism and of PPARgamma in adipogenesis.

TIE-2 and VEGFR Kinase Activities Drive Immunosuppressive Function of TIE-2-Expressing Monocytes in Human Breast Tumors.

PURPOSE: Tumor-associated TIE-2-expressing monocytes (TEM) are highly proangiogenic cells critical for tumor vascularization. We previously showed that, in human breast cancer, TIE-2 and VEGFR pathways control proangiogenic activity of TEMs. Here, we examine the contribution of these pathways to immunosuppressive activity of TEMs. EXPERIMENTAL DESIGN: We investigated the changes in immunosuppressive activity of TEMs and gene expression in response to specific kinase inhibitors of TIE-2 and VEGFR. The ability of tumor TEMs to suppress tumor-specific T-cell response mediated by tumor dendritic cells (DC) was measured in vitro. Characterization of TEM and DC phenotype in addition to their interaction with T cells was done using confocal microscopic images analysis of breast carcinomas. RESULTS: TEMs from breast tumors are able to suppress tumor-specific immune responses. Importantly, proangiogenic and suppressive functions of TEMs are similarly driven by TIE-2 and VEGFR kinase activity. Furthermore, we show that tumor TEMs can function as antigen-presenting cells and elicit a weak proliferation of T cells. Blocking TIE-2 and VEGFR kinase activity induced TEMs to change their phenotype into cells with features of myeloid dendritic cells. We show that immunosuppressive activity of TEMs is associated with high CD86 surface expression and extensive engagement of T regulatory cells in breast tumors. TIE-2 and VEGFR kinase activity was also necessary to maintain high CD86 surface expression levels and to convert T cells into regulatory cells. CONCLUSIONS: These results suggest that TEMs are plastic cells that can be reverted from suppressive, proangiogenic cells into cells that are able to mediate an antitumoral immune response. Clin Cancer Res; 19(13); 3439-49. ©2013 AACR.

Agent based simulation to optimise emergency departments

Nowadays, many of the health care systems are large and complex environments and quite dynamic, specifically Emergency Departments, EDs. It is opened and working 24 hours per day throughout the year with limited resources, whereas it is overcrowded. Thus, is mandatory to simulate EDs to improve qualitatively and quantitatively their performance. This improvement can be achieved modelling and simulating EDs using Agent-Based Model, ABM and optimising many different staff scenarios. This work optimises the staff configuration of an ED. In order to do optimisation, objective functions to minimise or maximise have to be set. One of those objective functions is to find the best or optimum staff configuration that minimise patient waiting time. The staff configuration comprises: doctors, triage nurses, and admissions, the amount and sort of them. Staff configuration is a combinatorial problem, that can take a lot of time to be solved. HPC is used to run the experiments, and encouraging results were obtained. However, even with the basic ED used in this work the search space is very large, thus, when the problem size increases, it is going to need more resources of processing in order to obtain results in an acceptable time.