Verificação da eficiência do modelo de Mohler na resposta do comportamento de vigas mistas de madeira e concreto

The aim of this research study was to evaluate the structural behaviour of the wood and concrete composite system for bridge decks with emphasis on the metal shear connectors. Experimental tests were performed on composite specimens and wood and concrete beams with a metallic connector system in an X position, using CS100900-type screws. All specimens and beams were submitted to static loads until failure in order to obtain the strength and stiffness of the connection system. The experimental results for the stiffness of the beams were compared with the analytical results obtained through the Mohler model, presenting good equivalence for service loads. The experimental results obtained demonstrate that the most significant damage in composite systems occurred in the connectors' areas.

Influência de diferentes métodos de esterilização de esmalte dental sobre a sua morfologia, composição química, estrutura e formação de biofilmes in vitro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preparação pelo método poliol modificado, caracterização estrutural e espectroscópia de nanopós de niobato de potássio e neodímio e de suas condições sólidas dopadas em európio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Seleção de famílias e progênies de irmãos completos de cana-de-açúcar para atributos tecnológicos e de produção pelo método de REML/BLUP

The objective of this study was to assess families and highlight the superior progenies of sugarcane originating from 38 biparental crosses for the following attributes: tons of cane per hectare (TCH), tons of biomass per hectare (TBIOH), brix (% cane juice), fiber content, purity, pol and total recoverable sugar (TRS). The data were analyzed by mixed model REML / BLUP in the REML (Restricted Maximum Likelihood) allowed us to estimate genetic parameters and BLUP (best linear unbiased prediction) to predict the additive and genotypic values. The best family for the attributes TCH and TBIOH was 41, whose parents are cultivars IACSP022019 x CTC9. In individual selection for TCH, the plant number 3 of Block 2, the crossing 78, showed the best results. To TBIOH the plant number 33, Block 1, family 41, showed the best results. Families 40, 41, 43, 68, 69, 79, 91, 92 and 147, were higher for the variables brix, pol, purity, and ATR, where as 85 families, 147, 148, 149, 161, 163, 177, 178, 179, and 183 were higher for fiber. The family 147 whose parents are IACSP042286 x IACSP963055, showed three progenies ranked among the top ten for both brix, and for fiber, which identifies the combination as a potential source of progenies for bioenergy production.

Reporting social behaviours of mixed-species troops formed by Callithrix jacchus and Callithrix penicillata (Primate, Callitrichidae)

In New World primates, mixed-species troops have been reported. Here, we analysed the performance of affiliative and agonistic behaviours of Callithrix jacchus and Callithrix penicillata living in mixed groups. For this purpose, we recorded the interaction of the individuals from two groups located in Bauru city, in the state of Sao Paulo (Brazil). Our data show that in both groups, affiliative behaviours appeared more frequently than agonistic ones. We concluded that there is cohesion inside the mixed-species troops observed. We suggest that a deeper knowledge about the social behaviour of mixed-species troop species certainly may be useful in projects linked with the management of the impact caused by them.

Allometric equations for estimating tree biomass in restored mixed-species Atlantic Forest stands

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Propriedades ópticas e elétricas de materiais híbridos de sílica/orgânico à base de GPTS:TEOS preparados pelo método sol-gel

Fabrication of optoelectronic devices requires the employment of at least one transparent electrode. Usually, commercially transparent electrodes have been made by deposition of indium tin oxide (ITO) films by RF-Sputtering technique. These commercial electrodes have sheet resistance of about 100 Ω/sq and optical transmittance of 77% at the wavelength of 550 nm. The poly(3,4-ethylenedioxythiophene):polystyrene-sulfonate (PEDOT:PSS) is an alternative material to fabricate transparent electrodes due to its high conductivity (about 600 S/cm) and solubility in water. Soluble conductive materials exhibits advantages for processing of electrode layers, however there is a disadvantage during devices fabrication once materials with the same solvent of the electrode material cannot be coated one over the other. Alternatively, organic/Silica hybrid materials prepared by sol-gel process allow producing bulks and films with high chemical durability. In order to obtain transparent electrodes with high chemical durability, we introduced a blended material comprising the high UV-VIS transparency of organic/Silica sol-gel material and a high conductivity polymer PEDOT:PSS. The organic/Silica sol was obtained using two different molar concentrations (1:1 and 4:1), of tetraethylorthosilicate (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTS). Amounts of PEDOT:PSS solutions were added to the sol material, resulting in different weight fractions of sol and polymer. G:T/P:P were deposit onto glass substrates by spray-coating. In order to perform electrical characterization of the blended material, gold electrodes were thermally evaporated onto the films. The electrical characterization was performed using a Keithley 2410 source/meter unity and the optical characterization, using a Cary50 UV-Vis spectrophotometer. The absorption coefficient and electric conductivity of the different compositions blends, as function of the PEDOT:PSS concentration, were...

Otimização dos parâmetros para obtenção de nanotubos em Ti-Cp por anodização eletroquímica e aplicação na liga experimental Ti-35Nb-7Zr

Pós-graduação em Engenharia Mecânica - FEG

Modificação de nanopartículas de óxido de ferro por dextranas

A modificação de nanopartículas de óxido de ferro tem sido motivo de diversos estudos devido ao grande potencial em aplicações tecnológicas, em especial a área biomédica, pela aliança das propriedades magnéticas dos óxidos com a funcionalidade que a dextrana confere a esse material. O presente trabalho tem como objetivo sintetizar e caracterizar o sistema óxido de ferro/dextranas. O óxido de ferro foi obtido pela reação de co-precipitação de sais de ferro (II) e ferro (III) - na razão molar 1:2 - com hidróxido de sódio e a modificação das partículas magnéticas se deu por dois métodos: (I) a co-precipitação na presença de dextrana e carboximetil dextrana e (II) a co-precipitação seguida da modificação. Para modificação proposta pelo método (II) se fez necessário enxertar a dextrana em ácido acrílico, utilizando o íon Ce(IV) como iniciador da reação de polimerização. Nessa etapa se averiguou a concentração de iniciador ótima para a síntese e, através da técnica de espectroscopia de infravermelho, se pode confirmar a eficiência do enxerto. A concentração 0,3% de íon Ce(IV) apresentou melhor distribuição de tamanho, obtidos por análises de microscopia eletrônica de varredura e espalhamento de luz dinâmico, sendo escolhida para síntese junto a partícula magnética. A difratometria de raio X permitiu determinar a formação de estrutura cristalina da magnetita e maghemita, que são muito parecidas entre si, porém os espectros de infravermelho apontaram desdobramentos da ligação Fe - O característica da maghemita. A relação Fe2+/ Fe3+ obtida por espectrofotometria também resultou em oxidação. A estabilidade coloidal dos sistemas foi avaliada através de medidas de potencial zeta. A modificação da partícula magnética com carboximetil dextrana foi equivalente para os dois métodos empregados, entretanto a modificação com ...

Determinação de fósforo em biodiesel utilizando eletrodo quimicamente modificado com nanopartículas de ferro

Once petroleum is na exhaustible source of energy, alternative fuels are having more prominence. A much discussed option for replacing fossil fuels is the use of biofuels derived from oils or fats, especially biodiesel. The biodiesel preparation is through a reaction named transesterification, a reaction of triglycerides with a short chain alcohol with a catalyst, producing a mixture of fatty acid esters and glycerol. According to ANP (National Petroleum Agency) specifications, biodiesel can have contaminants due to the catalyst or oil used on its synthesis, such as phosphorus, wich can damage the catalytic converter and cause significant increase in the particles emission. This project aims to develop na alternative method using chemically modified electrodes with iron nanoparticles for determination of phosphorus in biodiesel. For the formation of the iron nanoparticles film on the surface of a glassy carbon electrode, was used a iron sulfate solution. The film was formed after 10 successive cycles, with a scanning speed of 50 mV s-1 and a potential range of -0,9 to -1,25 V. To reduce possible oxides on the surface and activate the electrode, it has been subjected to a cathodic polarization with a potential of -1,25 V for 15 minutes in a sodium hydroxide solution. In cyclic voltammograms obtained in the study of the speed of scanning, there is an increase in the intensity of the anodic and cathodic current peaks. The cathodic peak current varied linearly with the square root of scan rate, showing that the electrode is controlled by diffusion. After successive additions of phosphate there is a linear variation in the current peak in the concentration range of 1,0 x 10-7 a 1,0 x 10-6 mol L-1. To determine if the concentration of phosphorus in real sample, the method of adding standard was used by adding aliquots of phosphate ions in the solution containing soy biodiesel extracted with ....

Preparação e caracterização de óxido de alumínio anodizado sobre substratos transparentes

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Utilização de lama vermelha para oxidação eletrolítica assistida por plasma de liga de alumínio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Empobrecimento e podzolização de solos lateríticos da bacia do Rio Negro e gênese dos podzóis na alta Bacia da Amazônia

Pós-graduação em Geografia - IGCE

Efeitos da adição do IGF-1 ou IGF-LongR3 sobre aspectos celulares e moleculares de complexos cumulus-oócito durante a maturação oocitária in vitro em bovinos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avian communities in woodlots in the Parque das Neblinas, Bertioga, São Paulo, Brazil

Parque das Neblinas (PN) is a 2,800 ha nature reserve contiguous with an Atlantic Forest fragment known as Parque Estadual da Serra do Mar located in the municipality of Bertioga, in the state of São Paulo, Brazil. The area originally contained Eucalyptus trees grown for paper pulp production. The aims of the study were the following: (1) to characterize the diversity of the bird community in PN; (2) to compare bird species observed in PN to species found in the Atlantic Forest; and (3) to list the percentages of species endemic to the Atlantic Forest and present in PN. Quantitative surveys used the point count method. The number of avian species recorded in PN totaled 222, of which 150 (66.4%) were associated with forest environments, 66 (29.3%) with open areas, and 10 (4.3%) with aquatic environments. The quantitative survey recorded 141 species and 2,527 contacts in 120 samples for an average of 21.05 contacts per sample. The general diversity index was H´=3.82. The study identified 15 bird species that actively participated in mixed flocks and 25 species endemic to Atlantic Forest, two of which present some kind of concern relating to conservation. Areas with Eucalyptus trees and a dense understory displayed the greatest bird species diversity, as opposed to areas with less developed or non-existent understories.