Influence of secondary packing on the freezing time of chiken meat in air blast freezing tunnels

Freezing of poultry cuts in continuous convective air blast tunnels is normally performed with the products protected by Low Density Polyethylene (LDPE) as a primary packaging and using Corrugated Cardboard Boxes (CCB) as secondary packaging. The objective of this work was to investigate the influence of these secondary packaging on the freezing of poultry cuts in continuous convective air blast tunnels. The study was performed by replacing CCB with Perforated Metal Boxes (PMB) in order to remove the packaging thermal resistance. The assays, performed in a industrial plant, demonstrated that CCB used commercially for meat freezing have a high heat transfer resistance. Their replacement with PMB can lead to shorter freezing times and spatially homogeneous freezing. Reductions of up to 45% in the freezing times were observed using PMB. The plateau of the temperature curve, related to the freezing time of free water, was significantly reduced using PMB, which is accepted to lead to better product quality after thawing. As the products were protected by the LDPE films as primary packaging, their appearance were not affected. The results presented in this work indicate that replacing CBB with PMB can be an excellent alternative to reduce freezing time and improve freezing homogeneity in industrial air blast tunnels, which could also be applied to other products.

Type of dietary lipids and storing time on egg stability

The objective of this work was to evaluate the influence of diets containing different lipid sources on eggs quality during refrigerated storage, on yolk fatty acid composition, and on cholesterol in the yolk. Four diets were used containing Soy Oil (SO), Sunflower Seed (SS), and Meat and Bone Meal + Soy Oil (MBM + SO) or Meat and Bone Meal + Tallow (MBM + TA). The experiment followed a factorial design 4 × 3 with four dietary treatments and three storage times. The eggs were stored at 4 °C for 0, 30, and 60 days. The collected eggs were analyzed for egg weight loss, Haugh units, yolk moisture, yolk lipid oxidation, and cooked yolk firmness. Refrigerated storage reduced Haugh units, and increased yolk moisture. Sixty days of storage time reduced the firmness of hard-cooked yolk. There was an interaction between dietary treatment and storage time for egg weight loss and lipid oxidation. With regard to yolk fatty acid profile, MBM + TA diet increased the contents of palmitic and palmitoleic acids. The levels of oleic and arachidonic acids were higher in yolks from birds fed with SS diet. Linoleic acid level was higher in the yolk from treatment with SO diet. Diets containing MBM + SO induced higher levels of docosahexaenoic acid. Yolk cholesterol content was reduced with the inclusion of SS in the diet. Therefore, the type of lipid present in the diet and refrigerated storage for 60 days at 4 °C can affect the egg quality.

Influence of different sanitizers on food contaminant bacteria: effect of exposure temperature, contact time, and product concentration

The efficiency of four Sanitizers - peracetic acid, chlorhexidine, quaternary ammonium, and organic acids - was tested in this work using different bacteria recognized as a problem to meat industry, Salmonella sp., S. aureus, E. coli and L. monocytogenes. The effects of sanitizer concentration (0.2, 0.5, 0.6, 1.0, 1.1 and 1.4%), at different temperatures (10 and 45 °C) and contact time (2, 10, 15, 18 and 25 minutes) were evaluated. Tests in an industrial plant were also carried out considering previously obtained results. In a general way, peracetic acid presented higher efficiencies using low concentration (0.2%) and contact time (2 minutes) at 10 °C. The tests performed in industrial scale showed that peracetic acid presented a good performance in concentration and contact time lower than that suggested by the suppliers. The use of chlorhexidine and quaternary ammonium led to reasonable results at the indicated conditions, and organic acids were ineffective under concentration and contact time higher than those indicated by the suppliers in relation to Staphylococcus aureus. The results, in general, show that the choice for the most adequate sanitizer depends on the microorganism contaminant, the time available for sanitizer application, and also on the process cost.

Project Charter, Scope, and Time Management In the Movie Industry

This thesis explores how the project charter development, project scope management, and project time management are executed in a Finnish movie production. The deviations and analogies between a case movie production and best practices suggested in PMBOK are presented. Empirical material from the case is gathered with two semi-structured interviews with a producer and a line producer. The interview data is categorized according to PMBOK knowledge areas. The analysis is complemented with movie industry specific norms found in popular movie production guides. The described and observed methods are linked together and the relationship between them is discussed. The project charter development, which is referred as a green light process in the movie industry, is mostly analogous between all areas. The deviations are in the level of formality. The green lighting in the case movie was accomplished without bureaucratic reports described in movie production guides. The empirical material shows that project management conventions and movie industry employ similar methods especially in scope management. Project management practices introduce a work breakdown structure (WBS) method, and movie production accomplishes the same task by developing a shooting script. Time management of the case movie deviates on most parts from the methods suggested in PMBOK. The major deviation is resource management. PMBOK suggests creating a resource breakdown structure. The case movie production accomplished this through budgeting process. Furthermore the popular movie production guides also disregard resource management as sovereign process. However the activity listing is quite analogous between the case movie and PMBOK. The final key observation is that although there is a broad set of effective and detailed movie industry specific methods, a comprehensive methodology that would cover the whole production process, such as Prince2 or Scrum, seems to be missing from the movie industry.

Project charter, scope, and time management in the movie industry

This thesis explores how the project charter development, project scope management, and project time management are executed in a Finnish movie production. The deviations and analogies between a case movie production and best practices suggested in PMBOK are presented. Empirical material from the case is gathered with two semi-structured interviews with a producer and a line producer. The interview data is categorized according to PMBOK knowledge areas. The analysis is complemented with movie industry specific norms found in popular movie production guides. The described and observed methods are linked together and the relationship between them is discussed. The project charter development, which is referred as a green light process in the movie industry, is mostly analogous between all areas. The deviations are in the level of formality. The green lighting in the case movie was accomplished without bureaucratic reports described in movie production guides. The empirical material shows that project management conventions and movie industry employ similar methods especially in scope management. Project management practices introduce a work breakdown structure (WBS) method, and movie production accomplishes the same task by developing a shooting script. Time management of the case movie deviates on most parts from the methods suggested in PMBOK. The major deviation is resource management. PMBOK suggests creating a resource breakdown structure. The case movie production accomplished this through budgeting process. Furthermore the popular movie production guides also disregard resource management as sovereign process. However the activity listing is quite analogous between the case movie and PMBOK. The final key observation is that although there is a broad set of effective and detailed movie industry specific methods, a comprehensive methodology that would cover the whole production process, such as Prince2 or Scrum, seems to be missing from the movie industry.

University students’ regulation of learning and text processing – examples from medical and teacher education

The general aim of the thesis was to study university students’ learning from the perspective of regulation of learning and text processing. The data were collected from the two academic disciplines of medical and teacher education, which share the features of highly scheduled study, a multidisciplinary character, a complex relationship between theory and practice and a professional nature. Contemporary information society poses new challenges for learning, as it is not possible to learn all the information needed in a profession during a study programme. Therefore, it is increasingly important to learn how to think and learn independently, how to recognise gaps in and update one’s knowledge and how to deal with the huge amount of constantly changing information. In other words, it is critical to regulate one’s learning and to process text effectively. The thesis comprises five sub-studies that employed cross-sectional, longitudinal and experimental designs and multiple methods, from surveys to eye tracking. Study I examined the connections between students’ study orientations and the ways they regulate their learning. In total, 410 second-, fourth- and sixth-year medical students from two Finnish medical schools participated in the study by completing a questionnaire measuring both general study orientations and regulation strategies. The students were generally deeply oriented towards their studies. However, they regulated their studying externally. Several interesting and theoretically reasonable connections between the variables were found. For instance, self-regulation was positively correlated with deep orientation and achievement orientation and was negatively correlated with non-commitment. However, external regulation was likewise positively correlated with deep orientation and achievement orientation but also with surface orientation and systematic orientation. It is argued that external regulation might function as an effective coping strategy in the cognitively loaded medical curriculum. Study II focused on medical students’ regulation of learning and their conceptions of the learning environment in an innovative medical course where traditional lectures were combined wth problem-based learning (PBL) group work. First-year medical and dental students (N = 153) completed a questionnaire assessing their regulation strategies of learning and views about the PBL group work. The results indicated that external regulation and self-regulation of the learning content were the most typical regulation strategies among the participants. In line with previous studies, self-regulation wasconnected with study success. Strictly organised PBL sessions were not considered as useful as lectures, although the students’ views of the teacher/tutor and the group were mainly positive. Therefore, developers of teaching methods are challenged to think of new solutions that facilitate reflection of one’s learning and that improve the development of self-regulation. In Study III, a person-centred approach to studying regulation strategies was employed, in contrast to the traditional variable-centred approach used in Study I and Study II. The aim of Study III was to identify different regulation strategy profiles among medical students (N = 162) across time and to examine to what extent these profiles predict study success in preclinical studies. Four regulation strategy profiles were identified, and connections with study success were found. Students with the lowest self-regulation and with an increasing lack of regulation performed worse than the other groups. As the person-centred approach enables us to individualise students with diverse regulation patterns, it could be used in supporting student learning and in facilitating the early diagnosis of learning difficulties. In Study IV, 91 student teachers participated in a pre-test/post-test design where they answered open-ended questions about a complex science concept both before and after reading either a traditional, expository science text or a refutational text that prompted the reader to change his/her beliefs according to scientific beliefs about the phenomenon. The student teachers completed a questionnaire concerning their regulation and processing strategies. The results showed that the students’ understanding improved after text reading intervention and that refutational text promoted understanding better than the traditional text. Additionally, regulation and processing strategies were found to be connected with understanding the science phenomenon. A weak trend showed that weaker learners would benefit more from the refutational text. It seems that learners with effective learning strategies are able to pick out the relevant content regardless of the text type, whereas weaker learners might benefit from refutational parts that contrast the most typical misconceptions with scientific views. The purpose of Study V was to use eye tracking to determine how third-year medical studets (n = 39) and internal medicine residents (n = 13) read and solve patient case texts. The results revealed differences between medical students and residents in processing patient case texts; compared to the students, the residents were more accurate in their diagnoses and processed the texts significantly faster and with a lower number of fixations. Different reading patterns were also found. The observed differences between medical students and residents in processing patient case texts could be used in medical education to model expert reasoning and to teach how a good medical text should be constructed. The main findings of the thesis indicate that even among very selected student populations, such as high-achieving medical students or student teachers, there seems to be a lot of variation in regulation strategies of learning and text processing. As these learning strategies are related to successful studying, students enter educational programmes with rather different chances of managing and achieving success. Further, the ways of engaging in learning seldom centre on a single strategy or approach; rather, students seem to combine several strategies to a certain degree. Sometimes, it can be a matter of perspective of which way of learning can be considered best; therefore, the reality of studying in higher education is often more complicated than the simplistic view of self-regulation as a good quality and external regulation as a harmful quality. The beginning of university studies may be stressful for many, as the gap between high school and university studies is huge and those strategies that were adequate during high school might not work as well in higher education. Therefore, it is important to map students’ learning strategies and to encourage them to engage in using high-quality learning strategies from the beginning. Instead of separate courses on learning skills, the integration of these skills into course contents should be considered. Furthermore, learning complex scientific phenomena could be facilitated by paying attention to high-quality learning materials and texts and other support from the learning environment also in the university. Eye tracking seems to have great potential in evaluating performance and growing diagnostic expertise in text processing, although more research using texts as stimulus is needed. Both medical and teacher education programmes and the professions themselves are challenging in terms of their multidisciplinary nature and increasing amounts of information and therefore require good lifelong learning skills during the study period and later in work life.

Real-time monitoring of laser scribing process utilizing high-speed camera

Currently, laser scribing is growing material processing method in the industry. Benefits of laser scribing technology are studied for example for improving an efficiency of solar cells. Due high-quality requirement of the fast scribing process, it is important to monitor the process in real time for detecting possible defects during the process. However, there is a lack of studies of laser scribing real time monitoring. Commonly used monitoring methods developed for other laser processes such a laser welding, are sufficient slow and existed applications cannot be implemented in fast laser scribing monitoring. The aim of this thesis is to find a method for laser scribing monitoring with a high-speed camera and evaluate reliability and performance of the developed monitoring system with experiments. The laser used in experiments is an IPG ytterbium pulsed fiber laser with 20 W maximum average power and Scan head optics used in the laser is Scanlab’s Hurryscan 14 II with an f100 tele-centric lens. The camera was connected to laser scanner using camera adapter to follow the laser process. A powerful fully programmable industrial computer was chosen for executing image processing and analysis. Algorithms for defect analysis, which are based on particle analysis, were developed using LabVIEW system design software. The performance of the algorithms was analyzed by analyzing a non-moving image from the scribing line with resolution 960x20 pixel. As a result, the maximum analysis speed was 560 frames per second. Reliability of the algorithm was evaluated by imaging scribing path with a variable number of defects 2000 mm/s when the laser was turned off and image analysis speed was 430 frames per second. The experiment was successful and as a result, the algorithms detected all defects from the scribing path. The final monitoring experiment was performed during a laser process. However, it was challenging to get active laser illumination work with the laser scanner due physical dimensions of the laser lens and the scanner. For reliable error detection, the illumination system is needed to be replaced.

A physical activity intervention in a workplace setting

Physical inactivity poses a huge burden on Canada's health care system and is detrimental to the health of Canadians (Katzmarzyk & Janssen, 2004). Walking is a viable option for individuals to become physically active on a daily basis and is in fact the most commonly reported leisure time physical activity. It has been associated with many health benefits including weight loss/weight control, reduced risk of coronary artery disease and diabetes, lowered blood pressure, and improved psychological wellbeing (Brisson & Tudor-Locke, 2004). Specifically, individuals' stage of change, selfefficacy and health related quality of life (HRQL) are three psychological constructs that can be greatly improved with increased physical activity (Dishman, 1991; Penedo & Dahn, 2005; Poag & McAuley, 1992). Public health physical activity recommendations exist but many individuals find these difficult to meet due to overly busy lifestyles (Public Health Agency of Canada, 2003). Pedometers are inexpensive devices that can monitor individual bouts of walking so that the incorporation of physical activity into one's daily life is more plausible. They are also excellent tools for motivation, goalsetting, and immediate feedback (Brisson & Tudor-Locke, 2004). Since many people spend a large proportion of their time at their places of employment, workplaces have begun to be a common site for the development of physical activity interventions. These programs have been growing in popUlarity and have shown numerous benefits for both employees and employers (Voit, 2001). The purpose of the current study was to implement and evaluate the use of a pedometer-based physical activity intervention incorporating goal-setting and physical activity logs in a workplace setting, and to examine the relationship between different types of self-efficacy (task, barrier, and scheduling) and different phases of the intervention. Twenty male participants from a local steel manufacturing plant who exhibited health risk factors (e.g. hypertension, diabetes, etc.) were assigned to one of two groups (group A or group B). All participants were asked to wear pedometers on their waists, record their daily steps, set goals that were outlined on a step-tracking sheet (detennined by their baseline number of steps), and keep track of their work days, wakelbed time, sedentary time, and time spent doing other physical activity. Group A began the intervention immediately following the baseline measures, whereas group B continued with their regular routine for 4 weeks before beginning. Physiological measures (height, weight, blood pressure, relative body fat, waist and hip circumference, and body mass index) were taken and a battery of questionnaires that assessed barrier, task and scheduling self-efficacy, HRQL, and stage of change administered at baseline, week 5 (end of intervention for group A), week 9 (end of intervention for group B; follow-up for group A) and week 13 (follow-up for both groups). Results showed that this workplace physical activity intervention was successful at increasing the participants' daily steps, that task self-efficacy is a significant predictor of participants' exercise adherence during the initial stages of participation (intervention phase), and that the participants felt that this intervention was effective. Finally, further exploratory analyses showed that this intervention was effective for all participants, but most valuable for participants most in need of improvement - that is, those who were most sedentary prior to the intervention. This intervention is an inexpensive use of simple and effective tools (e.g. pedometers), has the potential to attract a wide variety of participants and become a pennanent part of any health promotion initiative.

Preparing students for the transition from college to work /

The purpose of this study was to examine the perceived preparedness of college students for the transition from college to full-time employment. The study was concerned with the interest and rationale behind developing a required Exit Course for college students in order to improve the college to work transition. As well, possible content of an Exit Course was evaluated. The importance of addressing college to work transitions is highlighted by two phenomena. First, there are specific employability skills that employers in Canada are seeking in newly hired employees. Second, the provincial government in Ontario is determining college funding based on graduate employment statistics which are measured by graduate satisfaction, graduate employment, and employer satisfaction. The research concentrated on the following stakeholders involved in the transition from college to work: (a) current students, (b) recent graduates, (c) support staff who assist students in college to work transition (Career Educators), and (d) employers. Through qualitative research, including focus groups and interviews, these stakeholder groups participated in the research to determine if the Exit Course was a viable solution to facilitate the transition from college to work. Focus groups were conducted with current students, while one-on-one, semi-structured interviews were conducted with recent graduates, Career Educators, and employers. Common themes elicited from the participants included the following: (a) although students were perceived by the participants of this study to be technically prepared for employment, they were perceived to have weak job search skills and unrealistic expectations of the world of work unless they had received the benefits of a Co-operative Education experience; (b) an Exit Course was seen as a viable solution to the issues involved in college to work transition; (c) an Exit Course should be comprised of skills necessary to obtain and succeed in a job and the course should be taught by individuals with extensive qualifications in this area; and (d) there is a need to develop college and business partnerships to ensure that students are connected to employers. Educators within post secondary institutions, specifically colleges, can benefit from the information provided within this study to gain a better understanding of the perceived level of preparedness of students for the transition from college to work. Suggestions with regard to how to improve this transition were made, with specific reference to the addition of an Exit Course as one possible solution.

Quality time: exploring meaningful mandatory community involvement programs in secondary schools /

The purpose of this study was to explore the experiences of 5 stakeholder groups—students, parents, community organization representatives, guidance counsellors, and secondary school principals—in dealing with a mandatory secondary school graduation requirement in Ontario. The requirement is that students must complete 40 hours of eligible community involvement activities during their high school years in order to graduate. Ten stakeholders were interviewed regarding the nature of the community involvement program, what makes it work, and suggestions for improvement. The study found that although this program has the potential to provide a meaningful experience for students, and students are seen to gain from their experience in multiple ways, it depends substantially on the commitment of students, educators, and community organizations to make it worthwhile. Stakeholders recommended changes to the current program, which included making it a more structured process that would increase the consistency ofhow this program is implemented, finding ways to curb cheating and to reduce the administrative burden on schools, having more support from the Ontario provincial government and Ontario Ministry of Education and Training in the promotion and communication of this program, and developing partnerships between community organizations and schools to enrich the application of this program. This study concludes with a recommendation that the Ontario Ministry of Education and Training consider introducing Service-Learning, a curriculum-based experiential service and learning process, as an enhancement to the current community involvement program.

The influence of drug-induced dyskinesias on manual tracking in Parkinson's disease

The influence of peak-dose drug-induced dyskinesia (DID) on manual tracking (MT) was examined in 10 dyskinetic patients (OPO), and compared to 10 age/gendermatched non-dyskinetic patients (NDPD) and 10 healthy controls. Whole body movement (WBM) and MT were recorded with a 6-degrees of freedom magnetic motion tracker and forearm rotation sensors, respectively. Subjects were asked to match the length of a computer-generated line with a line controlled via wrist rotation. Results show that OPO patients had greater WBM displacement and velocity than other groups. All groups displayed increased WBM from rest to MT, but only DPD and NDPO patients demonstrated a significant increase in WBM displacement and velocity. In addition, OPO patients exhibited excessive increase in WBM suggesting overflow DID. When two distinct target pace segments were examined (FAST/SLOW), all groups had slight increases in WBM displacement and velocity from SLOW to FAST, but only OPO patients showed significantly increased WBM displacement and velocity from SLOW to FAST. Therefore, it can be suggested that overflow DID was further increased with increased task speed. OPO patients also showed significantly greater ERROR matching target velocity, but no significant difference in ERROR in displacement, indicating that significantly greater WBM displacement in the OPO group did not have a direct influence on tracking performance. Individual target and performance traces demonstrated this relatively good tracking performance with the exception of distinct deviations from the target trace that occurred suddenly, followed by quick returns to the target coherent in time with increased performance velocity. In addition, performance hand velocity was not correlated with WBM velocity in DPO patients, suggesting that increased ERROR in velocity was not a direct result of WBM velocity. In conclusion, we propose that over-excitation of motor cortical areas, reported to be present in DPO patients, resulted in overflow DID during voluntary movement. Furthermore, we propose that the increased ERROR in velocity was the result of hypermetric voluntary movements also originating from the over-excitation of motor cortical areas.

Co-operative education and the development of self-esteem, an internal locus of control and work habits

This study compared approximately 50 grade 12 students studying In th~ co-operative education mode with approximately 50 grade 12 students studying in a traditional English course. Measures of self-esteem, locus of control and work habits were compared before and at the conclusion of one semester's involvement in the different programs. Using Coopersmith's Self-Esteem Inventory, the students who had chosen to study in the co-operative education mode scored significantly higher than the students in the traditional course. At the end of the semester, the co-operative education students' scores remained significantly higher than the English students'. Although the test showed no sjgnifi~ant changes in self-esteem. anecdotal reports indicated that co-operative education students had increased self-esteem over the semester. No significant differences in locus of control were observed between the two groups at any time. Significant differences in work habits were observed. While both groups had the same number of absences and the same marks before taking these courses, students who were involved in co-operative education had significantly fewer absences and significantly higher marks than the students studying in the traditional course. Anecdotal reports also indicated an improv~ment in work habits for students who had been involved in co-operative education. Recommendations of the study are for further research to determine more exactly how self-esteem and work habits develop in co-operative education students. Also. students. parents, teachers. and administrators need to be made aware of the success of this program.

The impact of hospital downsizing on registered nurses displaced from full-time employment

This research identified and explored the various responses often women Registered Nurses displaced from full-time elnployment as staff nurses in general hospitals in southern Ontario. These nurses were among the hundreds in Ontario who were displaced between October 1991 and October 1995 as a result of organizational downsizing and other health care reform initiatives. The purpose ofthis research was to document tIle responses of nurses to job displacement, and how that experience impacted on a nurse's professional identity and her understanding of the nature and utilization of nursing labour. This study incorporated techniques consistent with the principles of naturalistic inquiry and the narrative tradition. A purposive sample was drawn from the Health Sector Training and Adjustment Program database. Data collection and analysis was a three-step process wherein the data collection in each step was informed by the data analysis in the preceding step. The main technique used for qualitative data collection was semistructured, individual and group interviews. Emerging from the data was a rich and textured story ofhow job displacement disrupted the meaningful connections nurses had with their work. In making meaning of this change, displaced nurses journeyed along a three-step path toward labour adjustment. Structural analysis was the interpretive lens used to view the historical, sociopolitical and ideological forces which constrained the choices reasonably available to displaced nurses while Kelly's personal construct theory was the lens used to view the process of making choices and reconstruing their professional identity.

How Ontario elementary school principals negotiate their varied work roles

This qualitative study>addresses the question of how Ontario elementary school principals negotiate their varied work roles, through interviews with and observations of 6 principals. Using inductive data analysis, principals' negotiations were divided into 5 categories: negotiating priorities, negotiating the process, negotiating constraints, negotiating the roles of others, and negotiating the self. These principals worked within these categories simultaneously, emphasizing some more than others, dependent on the circumstances. For these principals, the time they spent with people in the school and the resulting relationships that enabled them to build were a first priority, and a large part of how each principal chose to negotiate the demands of their role arose from their personality and their personal values.

What Matters? : the full-time graduate students' perceptions of teacher effectiveness

The purpose of this qualitative study was to explore the full-time graduate students' perceptions of teacher effectiveness at the graduate school level, to identify how graduate students perceive effective and ineffective teachers, and specifically to discover the main dimensions of teacher effectiveness that graduate students perceive as most significant. This topic was investigated because, although the teacher has been deemed as a crucial component in the teaching process, there is no common agreement on the definition and measure of teacher effectiveness. Graduate students' perceptions of teacher effectiveness have not been given much attention. The research design was based on a ground theory approach. It utilized qualitative data through interviews, field notes, andjournals. The findings ofthis study revealed that teacher effectiveness is markedly influential to graduate students. There is no universally consented definition or measure of teacher effectiveness due to the multidimensionality of teaching and learning. Nevertheless, several major dimensions ofteacher effectiveness were discovered and highlighted in this study. Such dimensions include good command of subject matter, presentation skills, challenging and motivating students, rapport with students, learning environment, course demands, as well as assessment and feedback. It was hoped that the study would move towards developing a theory that contributes to the knowledge base of graduate students' perceptions of teacher effectiveness. It was anticipated that the results would provide first-hand information for the instructor to improve teaching; for the administrator to promote the effective educational experiences and student achievements. It was intended that the findings would lay a theoretical and empirical groundwork for future research.