Orbit determination using GPS including perturbations due to geopotential coefficients of high degree and order and solar radiation pressure

The main target here is to determine the orbit of an artificial satellite, using signals of the GPS constellation and least squares algorithms implemented through sequential Givens rotations as a method of estimation, with the aim of improving the performance of the orbit estimation process and, at the same time, minimizing the computational procedure cost. Geopotential perturbations up to high order and direct solar radiation pressure were taken into account. It was also considered the position of the GPS antenna on the satellite body that, lately, consists of the influence of the satellite attitude motion in the orbit determination process. An application has been done, using real data from the Topex/Poseidon satellite, whose ephemeris is available at Internet. The best accuracy obtained in position was smaller than 5 meters for short period (2 hours) and smaller than 28 meters for long period (24 hours) orbit determination. In both cases, the perturbations mentioned before were taken into consideration and the analysis occurred without selective availability on the signals measurements.

Low voltage and variable-pressure scanning electron microscopy of fractured composites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Variable parameter and double sampling (X)over-bar charts in the presence of correlation: The Markov chain approach

The general assumption under which the (X) over bar chart is designed is that the process mean has a constant in-control value. However, there are situations in which the process mean wanders. When it wanders according to a first-order autoregressive (AR (1)) model, a complex approach involving Markov chains and integral equation methods is used to evaluate the properties of the (X) over bar chart. In this paper, we propose the use of a pure Markov chain approach to study the performance of the (X) over bar chart. The performance of the chat (X) over bar with variable parameters and the (X) over bar with double sampling are compared. (C) 2011 Elsevier B.V. All rights reserved.

Discoloration process modeling by neural network

The photo-oxidation of acid orange 52 dye was performed in the presence of H2O2, utilizing UV light, aiming the discoloration process modeling and the process variable influence characterization. The discoloration process was modeled by the use of feedforward neural network. Each sample was characterized by five independent variables (dye concentration, pH, hydrogen peroxide volume, temperature and time of operation) and a dependent variable (absorbance). The neural model has also provided, through Garson Partition coefficients and the Pertubation method, the independent variable influence order determination. The results indicated that the time of operation was the predominant variable and reaction mean temperature was the lesser influent variable. The neural model obtained presented coefficients of correlation on the order 0.98, for sets of trainability, validation and testing, indicating the power of prediction of the model and its character of generalization. (c) 2007 Elsevier B.V. All rights reserved.

A novel HPF voltage source rectifier for variable speed refrigeration systems

A novel single-phase voltage source rectifier capable to achieve High-Power-Factor (HPF) for variable speed refrigeration system application, is proposed in this paper. The proposed system is composed by a single-phase high-power-factor boost rectifier, with two cells in interleave connection, operating in critical conduction mode, and employing a soft-switching technique, controlled by a Field Programmable Gate Array (FPGA), associated with a conventional three-phase IGBT bridge inverter (VSI - Voltage Source Inverter), controlled by a Digital Signal Processor (DSP). The soft-switching technique for the input stage is based on zero-current-switching (ZCS) cells. The rectifier's features include the reduction in the input current ripple, the reduction in the output voltage ripple, the use of low stress devices, low volume for the EMI input filter, high input power factor (PF), and low total harmonic distortion (THD) in the input current, in compliance with the EEC61000-3-2 standards. The digital controller for the output stage has been developed using a conventional voltage-frequency control (scalar V/f control), and a simplified stator oriented Vector control, in order to verify the feasibility and performance of the proposed digital controls for continuous temperature control applied at a refrigerator prototype.

Variable-Structure Control Design of Switched Systems With an Application to a DC-DC Power Converter

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Spatial variability of soil water content and mechanical resistance of Brazilian ferralsol

The spatial variability of mechanical resistance to penetration (PR) and gravimetric moisture (GM) was studied at a depth of 0-0.40 m, in a ferralsol cropped with corn, and under conventional tillage in llha Solteira, Brazil (latitude 20 degrees 17'S, and longitude 52 degrees 25'W). The purpose of this study was to analyse and to try explaining the spatial variability of the mentioned soil physical properties using geostatistics. Soil data was collected at points arranged on the nodes of a mesh with 97 points. Geostatistics was used to analyse the spatial variability of PR and GM at four depths: 0-0. 1, 0.1-0.2, 0.2-0.3 and 0.3-0.4 m. PR showed a higher variability of data, with coefficients of variation of 52.39, 30.54, 16.91, and 15.18%, from the surface layers to the deepest layers. The values of the coefficients of variation for GM were lower: 9.99, 5.13, 5.59, and 5.69%. Correlation between GM and PR for the same soil layers was low. Penetration resistance showed spatial structure only in the 0.30-0.40 m layer, while gravimetric moisture showed spatial structure at all depths except for 0-0. 10 m. All the models of fitted semivariograms were spherical and exponential, with ranges of 10-80 m. Data for the variable 'GM' in the 0.20-0.30 and 0.30-0.40 m layers revealed a trend in data attributed to the occurrence of subsurface water flow. (C) 2005 Elsevier B.V. All rights reserved.

Valor nutricional da silagem de grãos úmidos de milho com diferentes graus de moagem para leitões na fase de creche

Utilizaram-se 72 leitões mestiços (Landrace x Large White), com peso inicial médio de 7,1kg, no experimento de desempenho e 20 leitões mestiços, com peso inicial médio de 18,9kg, no experimento de digestibilidade para avaliar a silagem de grãos úmidos de milho com diferentes granulometrias para leitões em fase de creche. O delineamento experimental foi em blocos ao acaso. em ambos os experimentos avaliaram-se o valor nutricional das silagens com diâmetro geométrico médio (DGM) das partículas de 979, 1168 e 2186µm e do milho seco com DGM das partículas de 594µm. Na fase de zero ao oitavo dia, a silagem proporcionou menor consumo diário de ração (CDR) em relação ao milho seco, e foi verificado aumento linear no CDR com o aumento da granulometria da silagem. A silagem com granulometria média e grossa proporcionou melhora na conversão alimentar (CA) em relação ao milho seco, mas não foi observada diferença no ganho diário de peso (GDP). Para o período total, não foram observadas diferenças estatísticas para CDR e GDP, entretanto a silagem proporcionou melhora na CA em relação ao milho seco havendo efeito linear crescente da granulometria da silagem sobre a CA. A granulometria da silagem não influenciou nos coeficientes de digestibilidade aparente (CDA) da matéria seca e da proteína bruta, porém proporcionou maiores CDA do fósforo e valores de energia digestível em relação ao milho seco. O CDA do cálcio e os valores de energia metabolizável foram maiores para a silagem com granulometria fina e média, comparado ao do milho seco. Houve redução linear do CDA do cálcio com o aumento da granulometria da silagem.

Synchrotron microComputed tomography of the mature bovine dentinoenamel junction

The mature dentinoenamel junction (DEJ) is viewed by some investigators and the current authors, not as a fossilized, sharp transition between enamel and dentin, but as a relatively broad structural transition zone including the mantle dentin and the inner aprismatic enamel. In this study, the DEJ structure in bovine incisors was studied with synchrotron microComputed Tomography (microCT) using small cubes cut parallel to the tooth surface. The reconstructions revealed a zone of highly variable punctate contrast between bulk dentin and enamel; the mean linear attenuation coefficients and their standard deviations demonstrated that this zone averaged less mineral than dentin or enamel but had more highly variable structure than either. The region with the punctuate contrast is, therefore, the mantle dentin. The thickness of the mantle dentin seen in a typical data set was about 30 mu m, and the mantle dentin-enamel interface deviated +/- 15 mu m from the average plane over a distance of 520 mu m. In the highest resolution data (similar to 1.5 mu m isotropic voxels, volume elements), tubules in the dentin could be discerned in the vicinity of the DEJ. Contrast sensitivity was high enough to detect differences in mineral content between near-surface and near-DEJ volumes of the enamel. Reconstructions before and after two cubes were compressed to failure revealed cracks formed only in the enamel and did not propagate across the mantle dentin, regardless of whether loading was parallel to or perpendicular to the DEJ. (C) 2007 Elsevier B.V. All rights reserved.

Locomoção, distúrbios neuropsiquiátricos e alterações do sono de pacientes com demência e seus cuidadores

INTRODUÇÃO: Os distúrbios neurodegenerativos representam condições clínicas graves, por provocar declínio neuropsíquico. OBJETIVO: Analisar a prevalência dos distúrbios neuropsiquiátricos em pacientes com demência, em relação à sua locomoção (independentes vs. dependentes), e no que se refere ao desgaste emocional e à qualidade do sono dos cuidadores. MATERIAIS E MÉTODOS: Participaram do estudo 34 sujeitos, assim divididos: dez pacientes independentes para locomoção e sete dependentes (cadeirantes); dez cuidadores dos pacientes independentes e sete cuidadores de pacientes dependentes. Os sujeitos foram avaliados no Ambulatório de Neuropsiquiatria da Universidade Estadual de Campinas. Para avaliar as funções cognitivas, utilizou-se o CAMCOOG; para quantificar frequência, intensidade e desgaste do cuidador, aplicou-se o Inventário Neuropsiquiátrico; e para mensurar as alterações do sono dos cuidadores, foi utilizado o Miniquestionário do Sono. A análise estatística foi realizada por meio dos testes U - Mann Whitney e índice de correlação de Spearman, ambos com 5% de significância. RESULTADOS: Com relação à prevalência dos distúrbios neuropsiquiátricos entre os pacientes, observou-se diferença estatisticamente significativa entre os grupos, especificamente no que se refere à irritabilidade (p < 0,05) e ao escore total dos distúrbios neuropsiquiátricos (p < 0,01). Também foram encontradas diferenças entre os grupos de cuidadores, com relação às alterações do sono (p < 0,05). CONCLUSÃO: Idosos independentes para locomoção apresentam menor prevalência dos distúrbios neuropsiquiátricos, quando comparados a idosos dependentes de cadeira de rodas. A locomoção parece não influenciar no desgaste físico e emocional do cuidador, mas constitui uma variável relevante na qualidade do sono dos cuidadores de idosos com diagnóstico de demência vascular e mista.

Connection coefficients and zeros of orthogonal polynomials

We discuss an old theorem of Obrechkoff and some of its applications. Some curious historical facts around this theorem are presented. We make an attempt to look at some known results on connection coefficients, zeros and Wronskians of orthogonal polynomials from the perspective of Obrechkoff's theorem. Necessary conditions for the positivity of the connection coefficients of two families of orthogonal polynomials are provided. Inequalities between the kth zero of an orthogonal polynomial p(n)(x) and the largest (smallest) zero of another orthogonal polynomial q(n)(x) are given in terms of the signs of the connection coefficients of the families {p(n)(x)} and {q(n)(x)}, An inequality between the largest zeros of the Jacobi polynomials P-n((a,b)) (x) and P-n((alpha,beta)) (x) is also established. (C) 2001 Elsevier B.V. B.V. All rights reserved.

The Q-D algorithm for transforming series expansions into a corresponding continued fraction: an extension to cope with zero coefficients

An algorithm for deriving a continued fraction that corresponds to two series expansions simultaneously, when there are zero coefficients in one or both series, is given. It is based on using the Q-D algorithm to derive the corresponding fraction for two related series, and then transforming it into the required continued fraction. Two examples are given. (C) 2003 Elsevier B.V. All rights reserved.

Zeros of Gegenbauer and Hermite polynomials and connection coefficients

In this paper, sharp upper limit for the zeros of the ultraspherical polynomials are obtained via a result of Obrechkoff and certain explicit connection coefficients for these polynomials. As a consequence, sharp bounds for the zeros of the Hermite polynomials are obtained.

The hierarchical model of branch planning with random coefficients

We consider the management branch model where the random resources of the subsystem are given by the exponential distributions. The determinate equivalent is a block structure problem of quadratic programming. It is solved effectively by means of the decomposition method, which is based on iterative aggregation. The aggregation problem of the upper level is resolved analytically. This overcomes all difficulties concerning the large dimension of the main problem.

Osmotic dehydration of apples in sugar/salt solutions: Concentration profiles and effective diffusion coefficients

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)