Feasibility of the Reintroduction of Wolves in Maine: a GIS Study

The eastern timber wolf (Canis lupus lycaon) once inhabited Maine, as well as the rest of the eastern United States and southern Canada. As a result of human land use and widespread extermination campaigns, wolf numbers dramatically decreased, and by the early twentieth century, no wolves remained in Maine. As large carnivorous and territorial mammals, wolves require contiguous undeveloped areas with abundant prey. This project is a feasibility study that identifies the areas in Maine that are suitable for the reintroduction of wolves. We used GIS modeling to identify contiguous forested areas over 1,000 km2, calculate road and population density, and map the presence or absence of prey throughout the state. These variables were combined in a habitat suitability model to determine the location and amount of suitable wolf habitat in Maine. The northwestern part of the state appears most suitable for wolf reintroduction as it is relatively undeveloped with low road and population densities. There is also a smaller isolated area in Washington County that might be suitable, but further investigation is required.

O investimento em ativos florestais : o caso norte-americano e o desenvolvimento desta classe de ativos no Brasil

Este trabalho explora a solução do problema de sub-investimento em novos plantios florestais no Brasil, por meio de empresas especializadas na gestão de ativos florestais. Com a redução dos novos plantios e a crescente demanda por produtos da indústria de base florestal, a oferta de madeira no país deve tornar-se insuficiente para atender a demanda no mercado interno. Programas governamentais de subsídio de crédito e programas privados de fomento florestal visam atrair novos participantes para o negócio das florestas plantadas, porém, essas iniciativas são insuficientes. Este trabalho explora a alternativa de organizar-se o investimento e a gestão dos ativos florestais por meio de empresas especializadas nesta função econômica. No caso dos EUA, vem crescendo a participação dos ativos florestais administrados por empresas organizadas na forma de TIMOs ou Timber REITs, que adquirem grandes áreas de florestas com os recursos de investidores institucionais. Estes investidores são atraídos pelo histórico de retorno desses investimentos e seu potencial para diversificação de carteiras. No Brasil, esses veículos devem ser adequados às necessidades do setor florestal brasileiro, caracterizado pela concentração da propriedade das florestas plantadas nas mãos de grandes empresas integradas, cuja grande parte da produção de madeira é destinada ao consumo próprio. Neste trabalho procurou-se sugerir a securitização de recebíveis florestais como alternativa para a criação desses veículos de investimento no Brasil. Esta alternativa poderia atender os interesses das empresas de base florestal, dos investidores institucionais, fundos de private equity e outros. São estudados casos desta operação na Europa e EUA. Para as empresas integradas, a securitização e a gestão independente das florestas permitiram a liberação de recursos para investimento em seus core businesses e contribuíram para a redução do custo de capital.

Processos produtivos e trabalho-educação: a incorporação do caboclo catarinense na indústria madeireira

The object theme of the present study is a population of caboclos that absorbed as manual workers in the saw-mills which were mounted in the highland region of Santa Catarina since 1950. The abundance of araucaria (native kind of pine) the opening of markets, and the corroboration of other industrial exploration conditions encouraged a great crowd of small en.- trepreneurs, coming basically from the state of Rio Grande do Sul, to migrate and settle down, building up a lot of saw-mills near rich forests and fields. The saw-mills started aprosperous production of timber sawn in planks. The process of industriali zation was so intensive, the destruction of pine woods soviolent that, in less than three decades, the forests ran out of tree reserves. The caboclos, absorbed as manual workers in production of timber, lived traditionally in an system of subsistense, either from the cultivation of pine the economic their land (planter caboclo) or as labourers in cattle-growing farms (farm hand caboclos). Nevertheless, the 'advantages' that were offered them by the new-comer entrepreneurs (a salary paid in money, a new house in a village, and other favours) helped the great majority of caboclos to abandon their traditional work and enlist as "workmen" in saw-mills. The new job, besides being a novelty, was an opportunity for a change in status. Subsequently, the running out of forests of araucaria and the resultant progressive shut-down of saw-mills caused the crowd of workmen to be out of imployment and to form to form a migratory flood toward the most important town of the region, Lages. The town of Lages, however, having made of the timber i ts main economic support wi thout the implantation of an alternative industry, was unable to offer the migrantssufficient 'work places'. In this way, the 'marginal crowd' began to settle down in the suburbs of the city. This study, in the context of the object theme, analyses two main questions related to the reality 'WOlLQ' and to the economic exploitation forms: ~) the relations of production in the economic regime of subsistence and in the capitalist regime of industrial production with the consequent 'positions' of the workman in the productive processj ~~) the deriving educative effects of the productive process, either in the economic regime of subsistence, or in the capitalist industrial regime. The two questions are theoretically debated andconfro~ ted with the proposed reality, giving origin to conclusions that, in a general formulation, can be summarized as follows: a) the caboclos of the highland region of Santa Catari na, when under an economic regime of subsistence, held in fee the productive processj there was a social division of the work and aclimate of freedom which made possible the development of knowledge from their life and work experience, the production of most of their tools, and the making of necessary manufactures adapted to their own surrounding ditionsi -- - --- other con- ------ b) however, these same caboclos, when absorbed by the capitalist industrial process of production - tipified by the work in saw-mills - lost the control of the productive processj this was caused by the technologic division of the work, since each man began to perform a dull and repeti tive action, directed by the speed of the 'major-saw' j man resigned form his skill and inventive power and surrendered to an executive authority which turned him into a 'collective worker'j the new productive process, besides rnaking each rnan a copy of a pattern, put the caboclos in a situation in which the daily work experiencedidn't add anything in terrns of autogenesis of knowledgei and even the environrnental educative rneans were reduced to new forrns of adaptation to the productive process, relegating rnan's inventive power to inertia.

A emergência da governança socioambiental no mercado internacional de biocombustíveis

O esgotamento das reservas de energia fóssil e o processo de mudanças climáticas causadas pelas emissões de GEEs posicionaram os biocombustíveis como a principal fonte alternativa de energia renovável disponível para uso em transportes no curto e médio prazos. Contudo, a presença de externalidades e assimetrias de informação dificultam a verificação da sustentabilidade neste setor. Assim, a emergência do mercado internacional de biocombustíveis mostra-se condicionada pela construção de instituições que garantam a sustentabilidade da produção e consumo desses produtos. O processo de construção das instituições de governança socioambiental é afetado por fatores de ordem técnica, política e institucional. Apoiado em aportes teóricos do institucionalismo econômico e sociológico, o presente estudo buscou analisar que elementos afetam este processo considerando a trajetória de mercados já estabelecidos que apresentam caraterísticas análogas ao setor de biocombustíveis (alimentos orgânicos e produtos florestais). A forma como legislações nacionais, acordos internacionais e sistemas de certificação privada se desenvolveram e interagiram nesses setores apresenta aderência com o processo de construção do mercado de biocombustíveis observado até o momento. Dentre os resultados encontrados, observa-se tendência à convergência entre padrões de sustentabilidade em diferentes legislações nacionais e sistemas de certificação privados devido às externalidades de rede que conferem maior valor a padrões adotados por uma gama mais ampla de usuários. A União Europeia desponta como o principal formador de padrões de sustentabilidade, dado seu perfil importador e o estabelecimento de critérios mais amplos nas legislações dos Estados Membros, geralmente implementada via integração de mecanismos de governança públicos e privados (meta-standards). Apesar do expressivo potencial de consumo, os EUA apresentam menor influência nesse processo devido a considerável capacidade de produção doméstica e a priorização de elementos estratégicos (segurança energética e desenvolvimento rural) no desenho de suas políticas de sustentabilidade para combustíveis de biomassa. Na esfera privada, o desenvolvimento de sistemas de certificação apresenta-se condicionado por elementos técnicos, como a eficiência em cobrir critérios relevantes e os custos incorridos neste processo; e políticos, relacionados à capacidade de legitimição dos atores envolvidos em cada um destes programas de certificação. Também se observa que caraterísticas tecnológicas e organizacionais das cadeias de produção de biocombustíveis afetam a expansão de sistemas de certificação, condicionando tanto os custos para o estabelecimento da cadeia de custódia como a capacidade de coordenação de ações setoriais visando a adoção de práticas sustentáveis que facilitem a obtenção da certificação. Essa relação fica evidente em novas nações que buscam estabelecer um setor bioenergético e enfrentam dificuldades em integrar a agricultura familiar à modelos de produção que respeitem critérios socioambientais vigentes no mercado internacional. A pesquisa revelou a necessidade de um entendimento mais aprofundado da interconexão de novas rotas tecnológicas e atores adentrando no mercado internacional de biocombustíveis. A compreensão dos riscos e potencialidades de novas formas de interação pública e privada na governança socioambiental apresenta-se como um campo prolífico para futuros estudos neste setor e em outros em que atributos ambientais se mostrem relevantes.

Wood : from the forest to the consumer

Illegal logging causes a number of environmental and social damages in countries where wood is sourced from native forests. Logging in protected areas is an act of irresponsibility that exacerbates the loss of biodiversity. In addition, uncontrolled deforestation and bushfires may aggravate climate change, not to mention the negative effects they impose on local populations, such as the impoverishment of rural communities whose livelihoods depend on forest products. Several studies show that Brazil ranks high in terms of irresponsible use of natural resources, including native wood from the Amazon. Even more worrisome is the fact that the state, despite being responsible for regulating logging activities, is one of the largest consumers of native wood, which subverts the goals of any government committed to sustainable environmental management. By monitoring the development and impacts of illegal timber production and consumption around the world, the Friends of the Amazon Network – an initiative by the Getulio Vargas Foundation with support from the British Government and the European Commission – identified a need to describe and evaluate, in a brief and instructive manner, the different mechanisms the state has available to reverse this predatory practice. One of the aspects discussed in this book is the role of civil servants in major efforts aimed at repressing illegal logging and timber production, as well as identifying products derived from these activities in order to prevent their consumption. This is the purpose of this publication, which uses detailed infographics and a journalistic approach, including interviews and true stories, to outline the complexity of Amazon timber’s chain of custody – from logging, processing and transportation to commercialization in the Brazilian market.

Clarinetas em Si Bemol e em Fá: diferenças acústicas e interpretativas

ALBERTO,Gabriel Gagliano Pinto. Clarinetas em Si Bemol e em Lá: diferenças acústicas e interpretativas. Belo Horizonte, MG, 2004. Orientador: Prof. Dr. Maurício Alves Loureiro. Dissertação (Mestrado) - Escola de Música da Universidade Federal de Minas Gerais.

Uso e disponibilidade da vegetação lenhosa em comunidades rurais no Rio Grande do Norte

The aim of this study was to test the Ecological Apparency Hypothesis comparing two rural communities in João Câmara (RN) and Remigio (PB), in the Northeast of Brazil. This hypothesis assumes that plants are perceived, known and used by human populations according to their local availability. The most used species would be the ones that are more available in the forest (apparent), and apparently suffer greater pressure of use. Communities were consulted through semi-structured interviews. In Remigio 42 people were interviewed, and 50 in João Câmara. The importance of each species was evaluated considering the distinction between citations from current and potential uses. The ethnobotanical information was associated with phytosociological parameters collected by the point-centered quarter method in forested areas, where 50 transects were distributed in each community, and 4,000 individuals sampled in total. Based on the interviews, 58 useful species were recorded, 42 genera and18 families. In the phytosociological study 30 species, 22 genera and 12 families in João Câmara, In Remígio were identified 34 species, 22 genera and nine families.The species were grouped into 11 categories of use. The ecological appearance was confirmed only in the João Câmara, which best explained the relationship between local availability and use of timber resources. Positive correlations were observed also between the technology category VUpotential and dominance. The point-centered quarter was efficient to test appearance, however, further studies through the point-centered quarter method are recommended

Crescimento inicial e morfologia foliar em plantas de Enterolobium contortisiliquum (Vell.) Morong. E Erythrina velutina Mart. ex Benth, sob estresse hídrico

The Caatinga is the predominant vegetation type in semi-arid region of Brazil, where many inhabitants depend on hunting and gathering for survival, obtaining resources for: food and feed, folk medicine, timber production, etc. It‟s the dry ecosystem with highest population density in the world. The early stages of development are the most critical during the life cycle of a flowering plant and they‟re primordial to its establishment in environments exposed to water stress. Information about adjustments to the growth of the species, correlated with their studies of distribution in Seridó oriental potiguar, are an important ecological and economic standpoint, because they provide subsidies for the development of cultivation techniques, to programs of sustainable use and recovery of degraded areas. This thesis aimed to study the initial growth and foliar morphology in plants like Enterolobium contortisiliquum (Vell.) Morong. (tamboril) and Erythrina velutina Mart. ex Benth (mulungu), species of occurrence in the Caatinga, under water stress. After sowing and emergency, the seedlings were exposed to three water regimes: 450 (control), 225 (moderate stress) and 112.5 (severe stress) mm of water slide for 40 days. Seeding occurred in bags of 5 kg and after the establishment of seedlings thinning was carried out leaving a plantlet per bag. At the beginning the waterings occurred daily with distilled water, passing to be on alternate days after thinning. Twenty and forty days after the thinning seedlings collections were held to be done analysis of growth and biomass partition. When compared to the control group, the treatments with water stress showed reduction in the growth of the aerial part, growth of the greater root, number of leaves and leaflets, dry leaf area and total phytomass in both species, but in general, this effect was most marked for E. velutina. Regarding the partition of biomass, there were few changes throughout the experiment. Morphological changes in the leaves as a function of stress were not significant, however, there was a trend, in both species, to produce narrower leaves, that facilitate heat loss to the environment. It has not been possible to establish a positive relationship between inhibition of growth and distribution of species, whereas E. velutina is a species of most common occurrence in Seridó oriental potiguar. In this way, other aspects should be taken into account when studying the adaptation of species the dry environments, such as salinity, presence of heavy metals, wind speed, etc

Minimizing inter-genotypic competition effects to predict genetic values and selection in forestry genetic tests

The effect of competition is an important source of variation in breeding experiments. This study aimed to compare the selection of plants of open-pollinated families of Eucalyptus with and without the use of competition covariables. Genetic values were determined for each family and tree and for the traits height, diameter at breast height and timber volume in a randomized block design, resulting in the variance components, genetic parameters, selection gains, effective size and selection coincidence, with and without the use of covariables. Intergenotypic competition is an important factor of environmental variation. The use of competition covariables generally reduces the estimates of variance components and influences genetic gains in the studied traits. Intergenotypic competition biases the selection of open-pollinated eucalypt progenies, and can result in an erroneous choice of superior genotypes; the inclusion of covariables in the model reduces this influence.

Análise operacional e econômica do processamento de madeira de Eucalitpo com Hypro em região montanhosa

O processo constante de avaliação técnica e econômica dos sistemas de colheita de madeira é intrínseco às empresas florestais, devido ao fato de corresponder a uma fase de suma importância que despende elevado investimento financeiro. No experimento deste trabalho, estudaram-se o rendimento operacional e custos operacionais e de produção do processador florestal Hypro. A análise técnica englobou estudos de tempos e movimentos pelo método de tempo contínuo. O rendimento operacional foi determinado através do volume, em metros cúbicos de madeira processada. A análise econômica incorporou os parâmetros do custo operacional, custo de processamento da madeira e rendimento energético. A análise dos dados evidenciou que o rendimento operacional por hora efetiva de trabalho foi de 38 árvores e, em metros cúbicos sem casca por hora efetiva de trabalho, de 11,68 m³ h-1, com custo de processamento de madeira sem casca de US$ 6.85 por metro cúbico.

Efeito do tempo de experiência de operadores de Harvester no rendimento operacional

A mecanização da colheita de madeira permite maior controle dos custos e pode proporcionar reduções em prazos relativamente curtos. Além disso, tem um lugar de destaque na humanização do trabalho florestal e no aumento do rendimento operacional. O presente trabalho teve por objetivo avaliar o desempenho de operadores de harvester em função do tempo de experiência na atividade. Foram avaliados oito operadores do sexo masculino, com idade entre 23 e 46 anos. O estudo consistiu na análise do volume de madeira colhida pelo harvester. O tempo de experiência afeta significativamente o rendimento operacional dos operadores de harvester. Tal rendimento aumenta expressivamente nos primeiros 18 meses de experiência, mantendo-se em ascensão nos próximos 26 meses. Após os 44 meses de experiência, o rendimento dos operadores tende a reduzir, revelando as possíveis acomodações do cotidiano. Tais resultados permitem concluir que por volta dos 50 meses de experiência na atividade de operação de harvester, se faz necessária a adoção de medidas de reciclagem, motivação, entre outras, a fim de proporcionar aos operadores melhores condições de trabalho que os possibilitem continuar exercendo a atividade de forma eficiente e rentável à empresa.

Influência do relevo na produtividade e custos do harvester

Among the several variables that influence timber harvesting is the slope, which influences the productivity of forest machines. In this experiment the harvester was evaluated technically and economically while cutting and processing eucalyptus activity on different slope classes. The technical analysis included a study of time and movements by the method of continuous time; productivity was determined by the volume in cubic meters of wood processing. The economic analysis included the parameters of operational cost, production cost and energy consumption. The analysis of the data showed that productivity decreased according to the increase of the percent slope inclination, resulting in an effective work hour productivity increase from 18.72 to 39.71 m(3)sc, with a mean of operating cost of US$ 78.78 per work hour.

Desenvolvimento e análise de material compósito a base de penas de frango (fibras de queratina-KF) e matriz de poliéster insaturado

Use of natural fibres as a reinforcement material in the manufacture of composites show a series of advantages: availability, biodegradability, low weight and regeneration in relation to synthetic fibres, thus justifying its utilization. In the present research work, composites were developed with chicken feathers (KF), using unsaturated polyester resin as matrix, for diversified applications, mainly in the furniture/timber industry.At present, in Brazil the chicken feathers are used as part of the animal feed, even though this material possesses low aggregated value. The chicken feathers are hollow, light and resistant. After washing with water at room temperature, a part of the chicken feathers were treated with 2% NaOH. Composites were manufactured using treated and untreated chicken feathers with unsaturated orthothalic polyester resin and 1% peroxide as catalyser, obtained in the commerce. Samples with size 150x25x3 mm for mechanical tests were cut by laser in the composite plate. Mechanical analyses were carried out in the Laboratório de Metais e Ensaios Mecânicos UFRN. All the analyses were in accordance with ASTM standards. SEM analyses were also carried out on the samples.In the analyses of the results obtained, it was observed that the composites made with untreated chicken feathers showed better results (Traction 11.406 MPa and 9.107 MPa Bending 34.947 and 20.918 MPa for samples with and without treatment respectively) compared to the composite with treated feathers. Very low values of the water absorption results, evidenced the impermeability characteristic of the feathers. From the SEM images, the structure, fracture and the fibre/matrix adsorption can be evidenced. In the flammability test, it was observed that despite the feathers having sulfur as a constituent, natural inhibitor of flame, no burning support of the composites, because the manufacturing process of the composite

Avaliação técnica e econômica da colheita de florestas de eucalipto com harvester

The acquisition of machinery used in timber harvesting depends on high financial investment, which implies the need for assessments that allow defining more precisely, what is the machine or the whole more recommended for streamlining the operation. This study aimed to technically and economically evaluating the performance of a harvester in Eucalyptus forest harvest first cut. The technique analysis included a time and movements, productivity, efficiency operational and mechanical availability. The economic analysis included the parameters operational cost, harvesting cost and energy consumption. The results obtained from the technological-economic parameters evidenced that of Diameter at Breast Height directly influenced the productivity of harvester. Consequently the lower costs of forest harvest were obtained for the compartments with wider diameter trees.

Lumber quality of Eucalyptus grandis as a function of diametrical position and log steaming

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)