Wind-CSP short-term coordination by MILP approach

This paper is on the maximization of total profit in a day-ahead market for a price-taker producer needing a short-term scheduling for wind power plants coordination with concentrated solar power plants, having thermal energy storage systems. The optimization approach proposed for the maximization of profit is a mixed-integer linear programming problem. The approach considers not only transmission grid constraints, but also technical operating constraints on both wind and concentrated solar power plants. Then, an improved short-term scheduling coordination is provided due to the more accurate modelling presented in this paper. Computer simulation results based on data for the Iberian wind and concentrated solar power plants illustrate the coordination benefits and show the effectiveness of the approach.

Short-term Value for the Water Stored in Headsensitivity Power System Reservoirs

As it is well known, competitive electricity markets require new computing tools for generation companies to enhance the management of its resources. The economic value of the water stored in a power system reservoir is crucial information for enhancing the management of the reservoirs. This paper proposes a practical deterministic approach for computing the short-term economic value of the water stored in a power system reservoir, emphasizing the need to considerer water stored as a scarce resource with a short-term economic value. The paper addresses a problem concerning reservoirs with small storage capacities, i.e., the reservoirs considered as head-sensitivity. More precisely, the respective hydro plant is head-dependent and a pure linear approach is unable to capture such consideration. The paper presents a case study supported by the proposed practical deterministic approach and applied on a real multi-reservoir power system with three cascaded reservoirs, considering as input data forecasts for the electric energy price and for the natural inflow into the reservoirs over the schedule time horizon. The paper presents various water schedules due to different final stored water volume conditions on the reservoirs. Also, it presents the respective economic value of the water for the reservoirs at different stored water volume conditions.

Boas práticas de igualdade de género e sua relação nos domínios da satisfação laboral e clima organizacional

A Igualdade entre Homens e Mulheres e a não discriminação constituem princípios fundamentais da Constituição da Republica Portuguesa e do Tratado que institui a União Europeia – Tratado de Lisboa. A desigualdade entre Homens e Mulheres constitui uma violação dos direitos fundamentais, e impõe um pesado custo à economia na medida em que se desaproveitam talentos em função do género. A promoção de uma efetiva igualdade entre Homens e Mulheres constitui um dever fundamental do Estado. A promoção da participação ativa de Homens e Mulheres na vida política, ao nível da administração central, regional e local, é também um forte indicador da qualidade da democracia de um estado. Tomando por base a temática da Igualdade de Género, o Roteiro para a Igualdade entre Homens e Mulheres (2006-2010), o pacto Europeu para a Igualdade entre os Sexos (2006), a Estratégia para a Igualdade entre Homens e Mulheres 2010-2015 que elencam ações consideradas prioritárias – igualdade na independência económica; igualdade na remuneração por trabalho igual e por trabalho de igual valor; igualdade na tomada de decisões; promoção da dignidade e a integridade, pôr fim à violência de género; e questões horizontais – papéis desempenhados por Homens e Mulheres, legislação, governação e instrumentos no domínio da igualdade entre Homens e Mulheres, o objeto deste estudo centra-se na atividade do Estado Português, mais concretamente ao nível local. Procurou-se enquadrar esta temática na Gestão dos Recursos Humanos, na busca de um conhecimento mais aprofundado sobre a implementação de Boas Práticas de Igualdade de Género e a sua relação nos domínios da Satisfação Laboral assim como no Clima Organizacional. O presente estudo expõe uma abordagem quantitativa, de carácter descritivo, exploratório, correlacional e preditivo. O tratamento estatístico realizou-se com recurso ao programa IBM SPSS Statistics, versão 21. Os resultados encontrados apontam para uma associação positiva entre a existência de boas práticas de igualdade de género e a satisfação laboral dos trabalhadores, assim como do clima organizacional. São apresentadas pistas para a intervenção no domínio da função da gestão e desenvolvimento dos recursos humanos.

TDBS: a time division beacon scheduling mechanism for ZigBee cluster-tree wireless sensor networks

Synchronization is a challenging and important issue for time-sensitive Wireless Sensor Networks (WSN) since it requires a mutual spatiotemporal coordination between the nodes. In that concern, the IEEE 802.15.4/ZigBee protocols embody promising technologies for WSNs, but are still ambiguous on how to efficiently build synchronized multiple-cluster networks, specifically for the case of cluster-tree topologies. In fact, the current IEEE 802.15.4/ZigBee specifications restrict the synchronization to beacon-enabled (by the generation of periodic beacon frames) star networks, while they support multi-hop networking in mesh topologies, but with no synchronization. Even though both specifications mention the possible use of cluster-tree topologies, which combine multi-hop and synchronization features, the description on how to effectively construct such a network topology is missing. This paper tackles this issue by unveiling the ambiguities regarding the use of the cluster-tree topology and proposing a synchronization mechanism based on Time Division Beacon Scheduling (TDBS) to build cluster-tree WSNs. In addition, we propose a methodology for efficiently managing duty-cycles in every cluster, ensuring the fairest use of bandwidth resources. The feasibility of the TDBS mechanism is clearly demonstrated through an experimental test-bed based on our open-source implementation of the IEEE 802.15.4/ZigBee protocols.

A time division beacon scheduling mechanism for IEEE 802.15.4/Zigbee cluster-tree wireless sensor networks

While the IEEE 802.15.4/Zigbee protocol stack is being considered as a promising technology for low-cost low-power Wireless Sensor Networks (WSNs), several issues in the standard specifications are still open. One of those ambiguous issues is how to build a synchronized multi-hop cluster-tree network, which is quite suitable for ensuring QoS support in WSNs. In fact, the current IEEE 802.15.4/Zigbee specifications restrict the synchronization in the beacon-enabled mode (by the generation of periodic beacon frames) to star-based networks, while it supports multi-hop networking using the peer-to-peer mesh topology, but with no synchronization. Even though both specifications mention the possible use of cluster-tree topologies, which combine multihop and synchronization features, the description on how to effectively construct such a network topology is missing. This paper tackles this problem, unveils the ambiguities regarding the use of the cluster-tree topology and proposes a synchronization mechanism based on Time Division Beacon Scheduling to construct cluster-tree WSNs. We also propose a methodology for an efficient duty cycle management in each router (cluster-head) of a cluster-tree WSN that ensures the fairest use of bandwidth resources. The feasibility of the proposal is clearly demonstrated through an experimental test bed based on our own implementation of the IEEE 802.15.4/Zigbee protocol.

Energy and delay trade-off of the GTS allocation mechanism in IEEE 802.15.4 for wireless sensor networks

The IEEE 802.15.4 protocol proposes a flexible communication solution for Low-Rate Wireless Personal Area Networks (LR-WPAN) including wireless sensor networks (WSNs). It presents the advantage to fit different requirements of potential applications by adequately setting its parameters. When in beaconenabled mode, the protocol can provide timeliness guarantees by using its Guaranteed Time Slot (GTS) mechanism. However, power-efficiency and timeliness guarantees are often two antagonistic requirements in wireless sensor networks. The purpose of this paper is to analyze and propose a methodology for setting the relevant parameters of IEEE 802.15.4-compliant WSNs that takes into account a proper trade-off between power-efficiency and delay bound guarantees. First, we propose two accurate models of service curves for a GTS allocation as a function of the IEEE 802.15.4 parameters, using Network Calculus formalism. We then evaluate the delay bound guaranteed by a GTS allocation and express it as a function of the duty cycle. Based on the relation between the delay requirement and the duty cycle, we propose a power-efficient superframe selection method that simultaneously reduces power consumption and enables meeting the delay requirements of real-time flows allocating GTSs. The results of this work may pave the way for a powerefficient management of the GTS mechanism in an IEEE 802.15.4 cluster.

Linear and sliding-mode control design for matrix converter-based unified power flow controllers

This paper presents the design and compares the performance of linear, decoupled and direct power controllers (DPC) for three-phase matrix converters operating as unified power flow controllers (UPFC). A simplified steady-state model of the matrix converter-based UPFC fitted with a modified Venturini high-frequency pulse width modulator is first used to design the linear controllers for the transmission line active (P) and reactive (Q) powers. In order to minimize the resulting cross coupling between P and Q power controllers, decoupled linear controllers (DLC) are synthesized using inverse dynamics linearization. DPC are then developed using sliding-mode control techniques, in order to guarantee both robustness and decoupled control. The designed P and Q power controllers are compared using simulations and experimental results. Linear controllers show acceptable steady-state behaviour but still exhibit coupling between P and Q powers in transient operation. DLC are free from cross coupling but are parameter sensitive. Results obtained by DPC show decoupled power control with zero error tracking and faster responses with no overshoot and no steady-state error. All the designed controllers were implemented using the same digital signal processing hardware.

Solid-State bipolar Marx modulator modeling

A mathematical model that simulates the operation of a solid-state bipolar Marx modulator topology, including the influence of parasitic capacitances is presented and discussed as a tool to analyze the circuit behavior and to assist the design engineer to select the semiconductor components and to enhance the operating performance. Simulations show good agreement with experimental results, considering a four stage circuit assembled with 1200 V isolated gate bipolar transistors and diodes, operating at 1000 V dc input voltage and 1-kHz frequency, giving 4 kV and 10-mu s output pulses into several resistive loads. Results show that parasitic capacitances between Marx cells to ground can significantly load the solid-state switches, adding new operating circuit conditions.

Industry energy optimization: A case study in a biodiesel production site

This paper presents a case study of heat exchanger network (HEN) retrofit with the objective to reduce the utilities consumption in a biodiesel production process. Pinch analysis studies allow determining the minimum duty utilities as well the maximum of heat recovery. The existence of heat exchangers for heat recovery already running in the process causes a serious restriction for the implementation of grassroot HEN design based on pinch studies. Maintaining the existing HEN, a set of alternatives with additional heat exchangers was created and analysed using some industrial advice and selection criteria. The final proposed solution allows to increase the actual 18 % of recovery heat of the all heating needs of the process to 23 %, with an estimated annual saving in hot utility of 35 k(sic)/y.

Projeto e implementação de um pré-regulador de fator de potência com controlo digital

Hoje em dia as fontes de alimentação possuem correção do fator de potência, devido às diversas normas regulamentares existentes, que introduziram grandes restrições no que respeita à distorção harmónica (THD) e fator de potência (FP). Este trabalho trata da análise, desenvolvimento e implementação de um Pré-Regulador de fator de potência com controlo digital. O controlo digital de conversores com recurso a processamento digital de sinal tem vindo a ser ao longo dos últimos anos, objeto de investigação e desenvolvimento, estando constantemente a surgirem modificações nas topologias existentes. Esta dissertação tem como objetivo estudar e implementar um Pré-Regulador Retificador Boost e o respetivo controlo digital. O controlo do conversor é feito através da técnica dos valores médios instantâneos da corrente de entrada, desenvolvido através da linguagem de descrição de hardware VHDL (VHSIC HDL – Very High Speed Integrated Circuit Hardware Description Language) e implementado num dispositivo FPGA (Field Programmable Gate Array) Spartan-3E. Neste trabalho são apresentadas análises matemáticas, para a obtenção das funções de transferência pertinentes ao projeto dos controladores. Para efetuar este controlo é necessário adquirir os sinais da corrente de entrada, tensão de entrada e tensão de saída. O sinal resultante do módulo de controlo é um sinal de PWM com valor de fator de ciclo variável ao longo do tempo. O projeto é simulado e validado através da plataforma MatLab/Simulink e PSIM, onde são apresentados resultados para o regime permanente e para transitórios da carga e da tensão de alimentação. Finalmente, o Pré-Regulador Retificador Boost controlado de forma digital é implementado em laboratório. Os resultados experimentais são apresentados para validar a metodologia e o projeto desenvolvidos.

Anti-vibration gloves and the forearm efforts during tools operations

The objective of this paper is to analyze the forearm muscular contraction levels associated to the use of anti-vibration gloves, by comparing the contraction levels with gloves and without gloves. Two different vibration tools were used in a simulated work environment: (1) A compact Duty Multi-Cutter Bosch and (2) and a Percussion Drill with a drill bit Ø20 mm. Standard operations were performed by each subject in the following materials: (1) Performing cross- sectional cuts in 80x40 mm pine section and (2) performing 20 mm diameter holes in a concrete slab 2 x 2 m, 70 mm thick. The forearm contraction level were measured by surface electromyography in four different muscles: Flexor Digitorum Superficialis (FDS), Flexor Carpi Ulnaris (FCU), Extensor Carpi Radialis Longus (ECRL) e Extensor Carpi Ulnaris (ECU). For the flexor muscles (FDS, FCU), an increase tendency in muscular contraction was observed when the operations are performed without gloves (2-5% MVE increase in the FDS and 3-9% MVE increase in the FCU). For the extensor muscles ECU a decrease tendency in muscular contraction was observed when the operations are performed without gloves (1-10% MVE decrease). Any tendency was found in the ECRL muscle. ECU was the muscle with the highest contraction level for 79% and 71% of the operators, during the operations respectively with the multi-cutter (P50= 27-30%MVE) and with the percussion drill (P50=46-55%MVE). As a final conclusion from this study, anti- vibration gloves may increase the forearm fatigue in the posterior region of the forearm (ECU muscle) during operations with the mentioned tools

A case study on the improvement of eco-efficiency ratios: application to a composite processing industry

The World Business Council for Sustainable Development (WBCSD) defines Eco-Efficiency as follows: ‘Eco- Efficiency is achieved by the delivery of competitively priced-goods and services that satisfy human needs and bring quality of life, while progressively reducing ecological impacts and resource intensity throughout the life-cycle to a level at least in line with the earth’s estimated carrying capacity’. Eco-Efficiency is under this point of view a key concept for sustainable development, bringing together economic and ecological progress. Measuring the Eco-Efficiency of a company, factory or business, is a complex process that involves the measurement and control of several and relevant parameters or indicators, globally applied to all companies in general, or specific according to the nature and specificities of the business itself. In this study, an attempt was made in order to measure and evaluate the eco-efficiency of a pultruded composite processing company. For this purpose the recommendations of WBCSD [1] and the directives of ISO 14301 standard [2] were followed and applied. The analysis was restricted to the main business branch of the company: the production and sale of standard GFRP pultrusion profiles. The main general indicators of eco-efficiency, as well as the specific indicators, were defined and determined according to ISO 14031 recommendations. With basis on indicators’ figures, the value profile, the environmental profile, and the pertinent eco-efficiency’s ratios were established and analyzed. In order to evaluate potential improvements on company eco-performance, new indicators values and ecoefficiency ratios were estimated taking into account the implementation of new proceedings and procedures, both in upstream and downstream of the production process, namely: a) Adoption of new heating system for pultrusion die in the manufacturing process, more effective and with minor heat losses; b) Implementation of new software for stock management (raw materials and final products) that minimize production failures and delivery delays to final consumer; c) Recycling approach, with partial waste reuse of scrap material derived from manufacturing, cutting and assembly processes of GFRP profiles. In particular, the last approach seems to significantly improve the eco-efficient performance of the company. Currently, by-products and wastes generated in the manufacturing process of GFRP profiles are landfilled, with supplementary added costs to this company traduced by transport of scrap, landfill taxes and required test analysis to waste materials. However, mechanical recycling of GFRP waste materials, with reduction to powdered and fibrous particulates, constitutes a recycling process that can be easily attained on heavy-duty cutting mills. The posterior reuse of obtained recyclates, either into a close-looping process, as filler replacement of resin matrix of GFRP profiles, or as reinforcement of other composite materials produced by the company, will drive to both costs reduction in raw materials and landfill process, and minimization of waste landfill. These features lead to significant improvements on the sequent assessed eco-efficiency ratios of the present case study, yielding to a more sustainable product and manufacturing process of pultruded GFRP profiles.

Prevalência do consumo de drogas ilícitas nas Forças Armadas estudo epidemiológico num dos ramos

RESUMO: Desde 1976 que as Forças Armadas desenvolvem acções de prevenção do consumo de drogas e álcool. Na década de 80 foi criada capacidade laboratorial e deu-se início a um programa de rastreios toxicológicos. No quinquénio 2001 a 2005, as proporções de resultados positivos, associando todos os tipos de rastreio, variaram entre 3,7% e 1,5%. De Outubro de 2006 a Julho de 2007 realizou-se um estudo analítico transversal, para estimar a prevalência do consumo de drogas (canabinóides, opiáceos, cocaína e anfetaminas) num dos Ramos das Forças Armadas, com base nos despistes realizados pelo seu laboratório. Foi utilizada uma amostra aleatória simples de 1039 militares, profissionais (QP) e contratados (RC), no activo e de ambos os sexos. Desde a nomeação dos militares a rastrear, passando pela cadeia de custódia das amostras até à obtenção do resultado foi utilizado apoio informático específico. O processo de pesquisa utilizou duas técnicas de triagem por imunoensaio e tecnologia de confirmação por GC/MS, de acordo com as recomendações europeias, permitindo estabelecer uma metodologia standard para organizações e empresas. A prevalência estimada, de consumidores de droga, foi de 3,8/1.000, para um erro de 0,37%. O número de casos registado (4) não permitiu a utilização de testes estatísticos que conduzissem à identificação de características determinantes da positividade, mas não deixou de revelar aspectos inesperados. A observação de séries de casos e a realização regular de estudos epidemiológicos, que ajudem a redefinir grupos alvo e a perceber a dimensão, as determinantes e as consequências do consumo de drogas é sugerida, em conclusão.--------------------------------------- RÉSUMÉ: Depuis 1976, les Forces Armées mettent au point des mesures visant à prévenir la consommation de drogues et d'alcool. En 1980, fut créé capacité laboratoriel et ont ensuite commencé un programme de dépistage toxicologique. Au cours des cinq années allant de 2001 à 2005, les proportions de consommateurs, impliquant tous les types de dépistage, allaient de 3,7% à 1,5 %. D'octobre 2006 à juillet 2007, une étude analytique transversale a été organisée pour évaluer la prévalence de l’usage de drogues (cannabis, opiacés, cocaïne et amphétamines) dans une branche de les Forces Armées, basée sur les dépistages faites par un laboratoire militaire, à l'aide d'un échantillon aléatoire de 1039 militaires, professionnels (QP) et sous contract (RC), à l’actif et des deux sexes. Tout au long du procès, de la nomination des donneurs, en passant par la chaine de garde des échantillons, jusqu’à obtention du résultat, il fut employé un appui informatique sécurisé. Le processus de recherche employa deux techniques de tri par imunoessay et la technologie de confirmation GC/MS, selon les recommandations européennes, permettant d'établir une méthodologie standard pour les organisations et les entreprises. La prévalence estimée fut de 3,8/1.000 pour une marge d’erreur de 0,37%. Le nombre de cas enregistrés (4) n'autorise pas l'utilisation de testes statistiques de menant à l'identification de caractéristiques déterminant de la positivité, mais il permet à révéler des aspects inattendus. L'observation de séries de cas et la tenue régulière d’études épidémiologiques, qui contribuent à redéfinir les groupes cibles et de comprendre l'ampleur, les déterminants et les conséquences de l'usage de drogues, est suggéré, en fin de compte.--------------------------------------- ABSTRACT: Since 1976, the Armed Forces, have been developing measures to prevent the use of drugs and alcohol. In 1980, was created laboratory facility which then started a program of toxicological screenings. In the five years running from 2001 to 2005, the proportions of consumers, involving all types of screening, ranged from 3,7% to 1,5%. From October 2006 to July 2007, a cross-sectional study was held to estimate the prevalence of drug use (cannabinoids, opiates, cocaine and amphetamines) in one branch of the Portuguese Armed Forces, based on laboratory screenings, using a random sample of 1039 military, professional (QP) and enlisted (RC), active-duty and of both sexes. Specific computer support was used all the way, from the appointment, including the chain of custody of samples, to the obtaining of the result. The process of search used two techniques for sorting by immunoassay and confirmation technology GC/MS, according to European recommendations, allowing to establish a standard methodology for organizations and companies. The estimated prevalence of drug users was 3.8/1.000 for a 0.37% error (95% confidence interval). The number of cases registered (4) does not permit use of statistical testing leading to the identification of characteristics weighing in the establishing to extrapolate for the population, but it allows revealing unexpected aspects. The observation of series of cases and the regular holding of epidemiological studies, which help redefine target groups and to understand the extent, the determinants and consequences of drug use, is suggested, in conclusion.

Dynamic cluster scheduling for cluster-tree WSNs

While Cluster-Tree network topologies look promising for WSN applications with timeliness and energy-efficiency requirements, we are yet to witness its adoption in commercial and academic solutions. One of the arguments that hinder the use of these topologies concerns the lack of flexibility in adapting to changes in the network, such as in traffic flows. This paper presents a solution to enable these networks with the ability to self-adapt their clusters’ duty-cycle and scheduling, to provide increased quality of service to multiple traffic flows. Importantly, our approach enables a network to change its cluster scheduling without requiring long inaccessibility times or the re-association of the nodes. We show how to apply our methodology to the case of IEEE 802.15.4/ZigBee cluster-tree WSNs without significant changes to the protocol. Finally, we analyze and demonstrate the validity of our methodology through a comprehensive simulation and experimental validation using commercially available technology on a Structural Health Monitoring application scenario.

Knowledge management in higher education institutions: a framework to improve collaboration

The purpose of this paper is to present a framework that increases knowledge sharing and collaboration in Higher Education Institutions. The paper discusses the concept of knowledge management in higher education institutions, presenting a systematization of knowledge practices and tools to linking people (students, teachers, researchers, secretariat staff, external entities)and promoting the knowledge sharing across several key processes and services in a higher education institution, such as: the research processes, learning processes, student and alumni services, administrative services and processes, and strategic planning and management. The framework purposed in this paper aims to improve knowledge practices and processes which facilitate an environment and a culture of knowledge collaboration,sharing and discovery that should characterize an institution of higher education.