The rewards of cooperation: The effects of membership in European regulatory networks

Networks famously epitomize the shift from 'government' to 'governance' as governing structures for exercising control and coordination besides hierarchies and markets. Their distinctive features are their horizontality, the interdependence among member actors and an interactive decision-making style. Networks are expected to increase the problem-solving capacity of political systems in a context of growing social complexity, where political authority is increasingly fragmented across territorial and functional levels. However, very little attention has been given so far to another crucial implication of network governance - that is, the effects of networks on their members. To explore this important question, this article examines the effects of membership in European regulatory networks on two crucial attributes of member agencies, which are in charge of regulating finance, energy, telecommunications and competition: organisational growth and their regulatory powers. Panel analysis applied to data on 118 agencies during a ten-year period and semi-structured interviews provide mixed support regarding the expectation of organisational growth while strongly confirming the positive effect of networks on the increase of the regulatory powers attributed to member agencies.

A Feasibility Study on Embedded Micro-Electromechanical Sensors and Systems (MEMS) for Monitoring Highway Structures, TR-575, 2011

Micro-electromechanical systems (MEMS) provide vast improvements over existing sensing methods in the context of structural health monitoring (SHM) of highway infrastructure systems, including improved system reliability, improved longevity and enhanced system performance, improved safety against natural hazards and vibrations, and a reduction in life cycle cost in both operating and maintaining the infrastructure. Advancements in MEMS technology and wireless sensor networks provide opportunities for long-term continuous, real-time structural health monitoring of pavements and bridges at low cost within the context of sustainable infrastructure systems. The primary objective of this research was to investigate the use of MEMS in highway structures for health monitoring purposes. This study focused on investigating the use of MEMS and their potential applications in concrete through a comprehensive literature review, a vendor survey, and a laboratory study, as well as a small-scale field study. Based on the comprehensive literature review and vendor survey, the latest information available on off-the-shelf MEMS devices, as well as research prototypes, for bridge, pavement, and traffic applications were synthesized. A commercially-available wireless concrete monitoring system based on radio-frequency identification (RFID) technology and off-the-shelf temperature and humidity sensors were tested under controlled laboratory and field conditions. The test results validated the ability of the RFID wireless concrete monitoring system in accurately measuring the temperature both inside the laboratory and in the field under severe weather conditions. In consultation with the project technical advisory committee (TAC), the most relevant MEMS-based transportation infrastructure research applications to explore in the future were also highlighted and summarized.

Deciphering the global organization of clustering in real complex networks

We uncover the global organization of clustering in real complex networks. To this end, we ask whether triangles in real networks organize as in maximally random graphs with given degree and clustering distributions, or as in maximally ordered graph models where triangles are forced into modules. The answer comes by way of exploring m-core landscapes, where the m-core is defined, akin to the k-core, as the maximal subgraph with edges participating in at least m triangles. This property defines a set of nested subgraphs that, contrarily to k-cores, is able to distinguish between hierarchical and modular architectures. We find that the clustering organization in real networks is neither completely random nor ordered although, surprisingly, it is more random than modular. This supports the idea that the structure of real networks may in fact be the outcome of self-organized processes based on local optimization rules, in contrast to global optimization principles.

JXTA security in mobile constrained devices

JXME is the JXTA protocols implementation formobile devices using J2ME. Two different flavors of JXME have been implemented, each one specific for a particular set of devices, according to their capabilities. The main value of JXME is its simplicity to create peer-to-peer (P2P) applications in limited devices. In addition to assessing JXME functionalities, it is also important to realize the default security level provided. This paper presents a brief analysis of the current state of security in JXME, focusing on the JXME-Proxied version, identifies existing vulnerabilities and proposes further improvements in this field.

Open Source Software : the Intersection of IP and Security in Open Source

The use of open source software continues to grow on a daily basis. Today, enterprise applications contain 40% to 70% open source code and this fact has legal, development, IT security, risk management and compliance organizations focusing their attention on its use, as never before. They increasingly understand that the open source content within an application must be detected. Once uncovered, decisions regarding compliance with intellectual property licensing obligations must be made and known security vulnerabilities must be remediated. It is no longer sufficient from a risk perspective to not address both open source issues.

Security in RFID devices

Aquest projecte inclou una aproximació als conceptes de RFID i targetes contactless centrant-se en l’ampliament usat MIFARE Classic chip. L’objectiu principal es mostrar el seu funcionament i les seves vulnerabilitats, així com alguns exemples pràctics fent una anàlisi de diferents serveis que les utilitzen.

Managing Packet Data (Sessions) in 3G Mobile Networks

Tällä hetkellä kolmannen sukupolven matkapuhelinjärjestelmät ovat siirtyneet kaupalliseen vaiheeseen. Universal Mobile Telecommunication System (UMTS) on eräs kolmannen sukupolven matkapuhelinjärjestelmä, jota tullaan käyttämään Euroopassa. Diplomityön päämääränä on tutkia, kuinka pakettivälitteistä tiedonsiirtoa hallitaan UMTS - verkoissa. Diplomityö antaa yleiskuvan toisen sukupolven matkapuhelinjärjestelmien datapalveluiden kehityksestä kolmannen sukupolven nopeisiin matkapuhelinjärjestelmiin. Pakettivälitteisen verkon verkkoarkkitehtuuri on esitetty sekä sen, diplomityön kannalta, tärkeimpien osien toiminnallisuus on selvitetty. Myös pakettipohjaisten datayhteyksien eli istuntojen muodostaminen ja vapauttaminen sekä aktiivisen yhteyden ominaisuuksien muokkaaminen on esitetty tässä diplomityössä. Yhteydenhallintaprotokolla, Session Management (SM), on yksi protokolla, joka osallistuu pakettidatayhteyden hallintaan. SM -protokolla on käsitelty työssä yksityiskohtaisesti. SM -protokollan SDL toteutus on esitetty diplomityön käytännönosassa

IP Multicast in Future Mobile Networks

Erilaisten IP-pohjaisten palvelujen käyttö lisääntyy jatkuvasti samalla, kun käyttäjistä tulee yhä liikkuvaisempia. Tästä syystä IP- protokolla tulee väistämättä myös mobiiliverkkoihin. Tässä diplomityössä tutkitaan mobiliteetin IP multcastingiin tuomia ongelmia ja simuloidaan niitä Network Simulatoria käyttäen. Pääpaino on ongelmalla, joka aiheutuu multicast- ryhmänmuodostusviiveestä. Tätä ongelmaa simuloidaan, jotta viiveen, mobiilikäyttäjien palveluunsaapumistaajuuden ja Scalable Reliable Multicast (SRM) protokollan ajastinarvojen asetusten vaikutus repair request- pakettien määrään ja sitä kautta suoritettavien uudelleenlähetysten määrään selviäisi. Eri parametrien vaikutuksen tutkimiseksi esitetään simulaatiotuloksia varioiduilla parametreillä käyttäen CDF- käyriä. Tulosten perusteella merkittävin tekijä uudelleenlähetyspyyntöjen kannalta on protokollan ajastimien arvot ja haluttu palvelun taso, viiveen merkityksen jäädessä vähäiseksi. Työn lopuksi tutkitaan SRM- protokollan soveltuvuutta mobiiliverkkoihin ja pohditaan vaihtoehtoja toiminnan parantamiseksi.

Security in multicast communication

Multicast is one method to transfer information in IPv4 based communication. Other methods are unicast and broadcast. Multicast is based on the group concept where data is sent from one point to a group of receivers and this remarkably saves bandwidth. Group members express an interest to receive data by using Internet Group Management Protocol and traffic is received by only those receivers who want it. The most common multicast applications are media streaming applications, surveillance applications and data collection applications. There are many data security methods to protect unicast communication that is the most common transfer method in Internet. Popular data security methods are encryption, authentication, access control and firewalls. The characteristics of multicast such as dynamic membership cause that all these data security mechanisms can not be used to protect multicast traffic. Nowadays the protection of multicast traffic is possible via traffic restrictions where traffic is allowed to propagate only to certain areas. One way to implement this is packet filters. Methods tested in this thesis are MVR, IGMP Filtering and access control lists which worked as supposed. These methods restrict the propagation of multicast but are laborious to configure in a large scale. There are also a few manufacturerspecific products that make possible to encrypt multicast traffic. These separate products are expensive and mainly intended to protect video transmissions via satellite. Investigation of multicast security has taken place for several years and the security methods that will be the results of the investigation are getting ready. An IETF working group called MSEC is standardizing these security methods. The target of this working group is to standardize data security protocols for multicast during 2004.

Customer driven business model – connecting customer value to firm resources in ICT value networks

The objective of this thesis is to provide a business model framework that connects customer value to firm resources and explains the change logic of the business model. Strategic supply management and especially dynamic value network management as its scope, the dissertation is based on basic economic theories, transaction cost economics and the resource-based view. The main research question is how the changing customer values should be taken into account when planning business in a networked environment. The main question is divided into questions that form the basic research problems for the separate case studies presented in the five Publications. This research adopts the case study strategy, and the constructive research approach within it. The material consists of data from several Delphi panels and expert workshops, software pilot documents, company financial statements and information on investor relations on the companies’ web sites. The cases used in this study are a mobile multi-player game value network, smart phone and “Skype mobile” services, the business models of AOL, eBay, Google, Amazon and a telecom operator, a virtual city portal business system and a multi-play offering. The main contribution of this dissertation is bridging the gap between firm resources and customer value. This has been done by theorizing the business model concept and connecting it to both the resource-based view and customer value. This thesis contributes to the resource-based view, which deals with customer value and firm resources needed to deliver the value but has a gap in explaining how the customer value changes should be connected to the changes in key resources. This dissertation also provides tools and processes for analyzing the customer value preferences of ICT services, constructing and analyzing business models and business concept innovation and conducting resource analysis.

Supplier's position in project marketing networks

The present study explores relationships between project marketers and their customers in project marketing context. The purpose of the study is to increase the understanding on supplier’s position in project marketing networks. Project marketing is representing a high volume in the international business, and the industrial network approach and the project marketing research cannot fully explain a supplier’s position in project marketing networks. Increased knowledge on project networks can also contribute to industrial marketing research more generally. Data for the present study was collected firstly during the pilot case study from project buyers in the paper and the steel industry in interviews. Secondly an entire project marketing case concerning a steel industry case was used as a data source. The data included interviews, correspondence between the supplier and the buyer, and project documents. The data of the pilot case was analysed with contents analysis, and in the case a deeper analysis based on the developed Stage Dimension framework was used. Supplier’s position in project marketing networks is a hierarchical and dynamic concept including a supplier’s position on the highest level. The dimensions of the position concept are the intermediate level, and the dimensions are based on the underlying components. Supplier’s position is composed from four organization related dimensions, and two individual actor related dimensions. The composition of the supplier’s position varies during the project marketing process, and consequently the relative importance of the dimensions is changing over the process. Supplier’s position in project marketing networks is shaped by incremental and radical changes. Radical changes are initiated by critical events. The study contributes to the research of industrial networks and project marketing. The theoretical contribution of the study is threefold: firstly it proposes a structure of the position concept in project marketing networks, secondly it proposes the Position Stage Dimension Component (PSDC) model for the development of supplier’s position during the project marketing process, and thirdly the study widens the critical event concept to cover the project marketing process both on the organizational and individual level. In addition to the theoretical contributions there are several managerial implications for planning and implementing marketing strategies in the project context.

G+: Enhanced Traffic Grooming in WDM Mesh Networks using Lighttours

In this article, a new technique for grooming low-speed traffic demands into high-speed optical routes is proposed. This enhancement allows a transparent wavelength-routing switch (WRS) to aggregate traffic en route over existing optical routes without incurring expensive optical-electrical-optical (OEO) conversions. This implies that: a) an optical route may be considered as having more than one ingress node (all inline) and, b) traffic demands can partially use optical routes to reach their destination. The proposed optical routes are named "lighttours" since the traffic originating from different sources can be forwarded together in a single optical route, i.e., as taking a "tour" over different sources towards the same destination. The possibility of creating lighttours is the consequence of a novel WRS architecture proposed in this article, named "enhanced grooming" (G+). The ability to groom more traffic in the middle of a lighttour is achieved with the support of a simple optical device named lambda-monitor (previously introduced in the RingO project). In this article, we present the new WRS architecture and its advantages. To compare the advantages of lighttours with respect to classical lightpaths, an integer linear programming (ILP) model is proposed for the well-known multilayer problem: traffic grooming, routing and wavelength assignment The ILP model may be used for several objectives. However, this article focuses on two objectives: maximizing the network throughput, and minimizing the number of optical-electro-optical conversions used. Experiments show that G+ can route all the traffic using only half of the total OEO conversions needed by classical grooming. An heuristic is also proposed, aiming at achieving near optimal results in polynomial time