FROM FACTORY-FLOOR TO UNIVERSITY

The interaction between industry and university is often discussed. Industry participants feel they do not have enough time to spend with academics because of tight deadlines to achieve your goals. The other hand, professors and his students do not have availability and resources for responding quickly to industry activities. Both sides recognize the associated problems and feel the consequences of various forms. One way to reduce the distance between them is to provide industrial labs that resemble the factory floor at the university. Thus not only students may work on a real technological base, but also the industry's problems can be brought to the university laboratory. To ensure that relevant industrial problems will be studied, the industry needs help in the formulation of the problem being researched. The graduate program of Automation and Control Engineering from UNESP Sorocaba is aimed at training human resources with skills in automation and control activities related to the development of automatic control processes, integrating electronic commands, intelligent manufacturing and industrial robotics. In order to achieve its objectives, one of the pillars of the university consists of a wide range of modern equipments and software for industrial automation, which allows the circuit assembly from most primitive until configuration and programming of a complex system of integrated manufacturing. This paper describes industrial automation equipments and laboratory structure offered to students of Control and Automation Engineering graduate program at UNESP Sorocaba as alternative to close technologies and real problems on the job until academic world. The strategic is to do students understand theory and operations in robotic and industrial automation by means to manipulating real production systems locate at university

Planejamento do projeto de adequação de segurança de máquinas numa multinacional produtora de absorventes descartáveis

Currently, more and more processing activities within companies are seen as projects. Project management, as a theory, is well developed and is accepted today in the market as a required competency for organizations. Various methods and techniques have been developed covering all aspects of a project, from conception to final delivery of the products produced by the same. The overall objective of the study is to report the experience of developing the project planning for the machine safety adequacy in robotic cells pallet manufacturers, demonstrating the importance of knowledge in the area of project management for the productive sector, and focusing on the difficulties encountered in particular project. Thus was developed the scope management by a team composed of different areas of engineering, and implementation strategy of the project was chosen from the tool BVOA, with the possible subsequent definition of the project schedule. Furthermore, the risk planning was analyzed using FMECA tool that predicts and mitigates potential failures. It is concluded that the constant and direct relationship between the different stakeholders generates more efficient results, reaching the demands of the project. The definition of alternatives for implementation enabled the viability of the project, and the study of failures was positive to enrich the analysis of planning

Avaliação experimental de medidas de aceleração

Acceleration is a key parameter for engineering and is becoming increasingly important because of the need for companies to become more competitive in the market. Both applying new technologies to their products and optimizing their process lines with predictive maintenance and robotic automation. This study aims to analyze the quality of the signals obtained from a capacitive accelerometer. To do that a test rig was mounted, which consist of a shaker, fed by a signal generator, a linear potentiometer and a capacitive accelerometer; for the signal acquisition was used a acquisition board and the Labview software, in order to integrate twice the signal from the accelerometer and compare it with the sign of the potentiometer. This work also demonstrates the impact of acquired signal processing as well as techniques of pre and post processing of signal via software GNU/Octave

As cidades pequenas na região metropolitana de Campinas-SP: dinâmica demográfica, papéis urbanos e (re) produção do espaço

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Brazilian identities: compositions and recompositions

The Contemporary Challenges series - originally sponsored by the Research Deanship of the State University of São Paulo (Unesp) - aims at providing access to essays on crucial issues concerning the Brazilian society as a whole. With the publication of those titles, which systematically avoid unnecessary academic jargon though preserving scientific rigour, the university fulfills one of its essential tasks: that of disseminating the skills and knowledge reared within its quarters. In the present volume, focused upon sociological questions, the authors face the difficult job of grasping the intricate horizon of complexities of Brazilian identity and their presence in the current national dilemmas.

Análise de teses internalistas subjacentes à modelagem computacional da mente em uma perspectiva situada, incoporada e auto organizada

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A metrópole e a prosa cinematográfica no modernismo estadunidense: uma abordagem de Manhattan Transfer de John Dos Passos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Machine vision and planning applied on assembby line of multiple products

This article describes the use of Artificial Intelligence (IA) techniques applied in cells of a manufacturing system. Machine Vision was used to identify pieces and their positions of two different products to be assembled in the same productive line. This information is given as input for an IA planner embedded in the manufacturing system. Therefore, initial and final states are sent automatically to the planner capable to generate assembly plans for a robotic cell, in real time.

Chaos control and sensitivity analysis of a double pendulum arm excited by an RLC circuit based nonlinear shaker

In this paper the dynamical interactions of a double pendulum arm and an electromechanical shaker is investigated. The double pendulum is a three degree of freedom system coupled to an RLC circuit based nonlinear shaker through a magnetic field, and the capacitor voltage is a nonlinear function of the instantaneous electric charge. Numerical simulations show the existence of chaotic behavior for some regions in the parameter space and this behaviour is characterized by power spectral density and Lyapunov exponents. The bifurcation diagram is constructed to explore the qualitative behaviour of the system. This kind of electromechanical system is frequently found in robotic systems, and in order to suppress the chaotic motion, the State-Dependent Riccati Equation (SDRE) control and the Nonlinear Saturation control (NSC) techniques are analyzed. The robustness of these two controllers is tested by a sensitivity analysis to parametric uncertainties.

A influência da temperatura de pré-aquecimento e tecimento na microestrutura e propriedades mecânicas na soldagem MIG/MAG robotizada de aços SAE 8620 com ABNT LN28

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Mapeamento da cinemática inversa de um manipulador robótico utilizando redes neurais artificiais configuradas em paralelo

Pós-graduação em Engenharia Elétrica - FEIS

DESIGN AND ANALYSIS OF MULTIFUNCTIONAL ROBOT FOR NOTES

The elimination of all external incisions is an important step in reducing the invasiveness of surgical procedures. Natural Orifice Translumenal Endoscopic Surgery (NOTES) is an incision-less surgery and provides explicit benefits such as reducing patient trauma and shortening recovery time. However, technological difficulties impede the widespread utilization of the NOTES method. A novel robotic tool has been developed, which makes NOTES procedures feasible by using multiple interchangeable tool tips. The robotic tool has the capability of entering the body cavity through an orifice or a single incision using a flexible articulated positioning mechanism and once inserted is not constrained by incisions, allowing for visualization and manipulations throughout the cavity. Multiple interchangeable tool tips of the robotic device initially consist of three end effectors: a grasper, scissors, and an atraumatic Babcock clamp. The tool changer is capable of selecting and switching between the three tools depending on the surgical task using a miniature mechanism driven by micro-motors. The robotic tool is remotely controlled through a joystick and computer interface. In this thesis, the following aspects of this robotic tool will be detailed. The first-generation robot is designed as a conceptual model for implementing a novel mechanism of switching, advancing, and controlling the tool tips using two micro-motors. It is believed that this mechanism achieves a reduction in cumbersome instrument exchanges and can reduce overall procedure time and the risk of inadvertent tissue trauma during exchanges with a natural orifice approach. Also, placing actuators directly at the surgical site enables the robot to generate sufficient force to operate effectively. Mounting the multifunctional robot on the distal end of an articulating tube provides freedom from restriction on the robot kinematics and helps solve some of the difficulties otherwise faced during surgery using NOTES or related approaches. The second-generation multifunctional robot is then introduced in which the overall size is reduced and two arms provide 2 additional degrees of freedom, resulting in feasibility of insertion through the esophagus and increased dexterity. Improvements are necessary in future iterations of the multifunctional robot; however, the work presented is a proof of concept for NOTES robots capable of abdominal surgical interventions.

Tele-obstetric ultrasound: analysis of first-trimester ultrasound images transmitted in realtime

We evaluated the diagnostic quality of first-trimester ultrasound images transmitted in realtime using low-cost telecommunications. A prospective sample of fetal ultrasound images from 11 weeks to 13 weeks and six days of pregnancy was obtained from pregnant women over 18 years old. The examinations were transmitted in realtime to three independent examiners who carried out a qualitative assessment based on parameters established by the Fetal Medicine Foundation. All fetal structures could be viewed and the quality of images received by the examiners was considered normal. There were significant differences for crown-rump length and nuchal translucency in the transmitted images but the loss in definition was acceptable. Thus the quality of images transmitted via the Internet through the use of low-cost software appeared suitable for screening for chromosomal abnormalities in the first trimester of pregnancy.

Is early manual preference in infants defined by intermanual performance asymmetry in reaching?

In the present study we evaluated the relationship between manual preference and intermanual performance asymmetry in reaching of 5-month-old infants. Manual preference was assessed through frequency of reaches toward toys presented at midline, left or right in egocentric coordinates. Intermanual performance asymmetry was evaluated through kinematic analysis. Results showed that performance was predominantly symmetric between hands. Lateral toy positions induced predominance of ipsilateral reaching, while the midline position led to equivalent distribution between right and left handed reaches. No significant correlation between manual preference and intermanual performance asymmetry was observed. These results converge against the notion that manual preference derives from a genetically determined advantage of movement control favoring the right hand. (C) 2012 Elsevier Inc. All rights reserved.

In-Flight Collision Avoidance Controller Based Only on OS4 Embedded Sensors

The major goal of this research was the development and implementation of a control system able to avoid collisions during the flight for a mini-quadrotor helicopter, based only on its embedded sensors without changing the environment. However, it is important to highlight that the design aspects must be seriously considered in order to overcome hardware limitations and achieve control simplification. The controllers of a UAV (Unmanned Aerial Vehicle) robot deal with highly unstable dynamics and strong axes coupling. Furthermore, any additional embedded sensor increases the robot total weight and therefore, decreases its operating time. The best balance between embedded electronics and robot operating time is desired. This paper focuses not only on the development and implementation of a collision avoidance controller for a mini-robotic helicopter using only its embedded sensors, but also on the mathematical model that was essential for the controller developing phases. Based on this model we carried out the development of a simulation tool based on MatLab/Simulink that was fundamental for setting the controllers' parameters. This tool allowed us to simulate and improve the OS4 controllers in different modeled environments and test different approaches. After that, the controllers were embedded in the real robot and the results proved to be very robust and feasible. In addition to this, the controller has the advantage of being compatible with future path planners that we are developing.