Anaerobic Reactor Development for Complex Organic Wastewater

Faculty of Engineering. Cochin University of Science and Technology

Influence of Angle of Air Injection and Particles in Bed Hydrodynamics of Swirling Fluidized Bed

The thesis presented here unveils an experimental study of the hydrodynamic characteristics of swirling fluidized bed viz. pressure drop across the distributor and the bed, minimum fluidizing velocity, bed behaviour and angle of air injection. In swirling fluidized bed the air is admitted to the bed at an angle 'Ѳ' to the horizontal. The vertical component of the velocity v sin Ѳ causes fluidization and the horizontal component v cos Ѳ contributes to swirl motion of the bed material.The study was conducted using spherical particles having sizes 3.2 mm, 5.5 mm & 7.4 mm as the bed materials. Each of these particles was made from high density polyethylene, nylon and acetal having relative densities of 0.93, 1.05 and 1.47 respectively.The experiments were conducted using conidour type distributors having four rows of slits. Altogether four distributors having angles of air injection (Φ)- 0°, 5°, 10° & 15° were designed and fabricated for the study. The total number of slits in each distributor was 144. The area of opening was 6220 mm2 making the percentage area of opening to 9.17. But the percentage useful area of opening of the distributor was 96.The experiments on the variation of distributor pressure drop with superficial velocity revealed that the distributor pressure drop decreases with angle of air injection. Investigations related to bed hydrodynamics were conducted using 2.5 kg of bed material. The bed pressure drop measurements were made along the radial direction of the distributor at distances of 60 mm, 90 mm, 120 mm & 150 mm from the centre of the distributor. It was noticed that after attaining minimum fluidizing velocity, the bed pressure drop increases along the radial direction of the distributor. But at a radial distance of 90 mm from the distributor centre, after attaining minimum fluidizing velocity the bed pressure drop remains almost constant. It was also observed that the bed pressure drop varies inversely with particle size as well as particle density.An attempt was made to determine the effect of various parameters on minimum fluidizing velocity. It was noticed that the minimum fluidizing velocity varies directly with angle of air injection (Φ), particle size and particle density.The study on the bed behaviour showed that the superficial velocity required for initiating various bed phenomena (such as swirl motion and separation of particles from the cone at the centre) increase with increase in particle size as well as particle density. It was also observed that the particle size and particle density directly influence the superficial velocity required for various regimes of bed behaviour such as linear variation of bed pressure drop, constant bed pressure drop and sudden increase or decrease in bed pressure drop.Experiments were also performed to study the effect of angle of air injection (Φ). It was noticed that the bed pressure drop decreases with angle of air injection. It was also noticed that the angle of air injection directly influence the superficial velocity required for initiating various bed phenomena as well as the various regimes of bed behaviour.

Nitrifying Bioreactors Integrated into Shrimp and Prawn Hatchery Systems: Molecular Characterization of the Nitrifying Consortia,Reactor Kinetics, Modeling and Validation

National Centre for Aquatic Animal Health, Cochin University of Science and Technology

Effect of Feeding Rate in Polymer Extrusion ”

Starve feeding of single screw extruder was described as an important means of improving the performance characteristics of the extruder. In addition to such improvement with versatility, the starve feeding technique also may affect the mechanical properties of the extrudate since the heat transfer an(l mixing characteristics in the starve fed and Hood fed extruders are not the same. Since the material is more loosely packed in the channels of the starve fed extruder, there may be greater bed mobility and uniformity. Further, the. thermal an(l shear induced degradation are also less since possibilities of developing local high temperatures are less compared to a densely compacted extruder bed. This study has been undertaken mainly to explore the effect of feeding rate on the mechanical properties of rubber and plastic extrudates since the effect of feeding rate has not been analysed from this angle so far.

Stringed bed suspended bioreactors (SBSBR)for in situ nitrification in penaeid and non-penaeid hatchery systems

For establishing nitrification in prawn (non-penaeid, salinity 10–15 ppt) and shrimp (penaeid, salinity 30–35 ppt) larval production systems, a stringed bed suspended bioreactor (SBSBR) was designed, fabricated, and validated. It was fabricated with 5 mm polystyrene and low density polyethylene beads as the substrata for ammonia and nitrite oxidizing bacterial consortia, respectively, with an overall surface area of 684 cm2. The reactors were activated in a prototype activator and were transported in polythene bags to the site of testing. Performance of the reactors activated with the nitrifying bacterial consortia AMONPCU-1 (ammonia oxidizers for non-penaeid culture) and NIONPCU-1 (nitrite oxidizers for non-penaeid culture) was evaluated in a Macrobrachium rosenbergii larval rearing system and those activated with AMOPCU-1 (ammonia oxidizers for penaeid culture) and NIOPCU-1 (nitrite oxidizers for penaeid culture) in a Penaeus monodon seed production system. Rapid setting up of nitrification could be observed in both the static systems which resulted in a higher relative per cent survival of larvae

Session outline and learning outcomes - bed mobility

This resource is for Health Scientists

The visit , de Merle Collins, y The bed sitting room, de Maureen Ismay : dos aproximaciones al tema del desplazamiento en la literatura post-colonial.

Se analiza como se trata el tema del desplazamiento, cuestión clave en la literatura post-colonial, en dos historias cortas de las escritoras caribeñas Merle Collin y Maureen Ismay, principalmente a través de la problemática de género, raza, y la relación madre-hija, metrópoli-colonia, así como la cuestión linguística.

15 ways to go to bed.

Descubre quince maneras de ir a la cama en esta colección de poemas, que muestra los múltiples enredos, batallas, juegos y sorpresas en torno a la rutina diaria de acostarse.

Under the bed : the bedtime book.

Varias historietas de humor absurdo sobre la cama. Cuando un niño se despierta en su cama, comprueba que a ésta le han crecido alas y puede volar. El niño en su cama sobrevuela tejados y calles. Llega tan lejos que, desde el cielo ve los barcos de pesca cruzando el mar.

There's an octopus under my bed!

A Molly le encanta jugar. Juega a caballo. Juega a hacer un dinosaurio. Así que cuando su madre dice: Molly, ordena, ella nunca tiene tiempo para hacerlo, pero todo termina siempre limpio y ordenado. Es magia, o hay un pulpo que le gusta la casa y que vive bajo la cama. Molly está decidida a averiguarlo.

The bed and breakfast star.

Historia de una niña haciendo lo mejor que puede en un implacable mundo donde las cosas nunca son realmente como deberían ser. Elsa y su familia vivían en una hermosa casa, pero su padrastro perdió su puesto de trabajo y ahora viven en una habitación familiar en el Royal Hotel. Lo que significa que ella, mamá, Mack, y su hermana pequeña Pippa y Hank están abarrotados en la habitación y esto realmente llega a atacar los nervios. Ella cuenta chistes y hace bromas todo el tiempo, para intentar hacer reír a la gente, aunque no siempre es fácil. Pero cuando ocurre un desastre en el hotel, Elsa tiene la oportunidad de ser una verdadera estrella. Para ocho a diez años.

Ten in the bed.

Se basa en una canción tradicional. Cuenta cómo un niño llega a abordar el problema de dormir con demasiados juguetes. El texto permite a los niños seguir la rima fácilmente. Para aprender los primeros números y contar hasta diez. Para identificar a los animales de peluche e imitar sus sonidos. Para la lectura en grupo, individual o en parejas.

Ten in the bed.

Se basa en una canción tradicional. Cuenta cómo un niño llega a abordar el problema de dormir con demasiados juguetes. El texto permite a los niños seguir la rima fácilmente. Para aprender los primeros números y contar hasta diez. Para identificar a los animales de peluche e imitar sus sonidos. Para la lectura en grupo, individual o en parejas.