Mechanisms of HCF protein proteolytic maturation

Abstract : Post-translational modifications such as proteolytic processing, phosphorylation, and glycosylation, add extra layers of complexity to proteomes and allow a finely tuned regulation of the activity of many proteins. The evolutionarily conserved cell-cycle and transcriptional regulator HCP-] is regulated by proteolytic maturation via which a stable heterodirneric complex of two cleaved subunits is formed from a single precursor protein. The human HCF-1 precursor is cleaved at six nearly identical 26 amino acid sequence repeats, called HCF-1pro repeats, which represent uncommon protease recognition sites dedicated to human HCF-1 proteolysis. This proteolytic maturation process is conserved in vertebrate HCF-1 homologues and is essential for the functions of the human protein in cell-cycle regulation; the mechanisms that execute and control HCF-1 proteolysis, however, remain poorly understood. In this dissertation I investigate the mechanisms of proteolytic maturation of HCF-1 proteins in different species. I show that the Drosophila homolog of human HCF-1, called dHCP, is proteolytically cleaved via a different mechanism than human HCF-1. dHCP is processed by the same protease, called Taspase], which cleaves one of the key developmental regulators in flies, the Trithorax protein. Maturation of HCP proteins via Taspase] cleavage is probably not particular to dHCP as many invertebrate HCP proteins, particularly insects and flatworms, possess Taspase] recognition sites. In contrast, the vertebrate HCF-1 proteins lack Taspase] recognition sites and the HCF-1pro repeats are not Taspase1 substrates, suggesting that multiple mechanisms for HCF-1 proteolytic maturation have appeared during evolution. I also show that the proteolytic activity responsible for the cleavage of the HCP- 1pro repeats is very difficult to characterize, being resistant to most protease inhibitors and very sensitive to biochemical fractionation. Moreover, the HCF-1pro repeats represent complex protease recognition sites and I demonstrate that, in addition to be the HCF-1 cleavage sites, these repeated sequences, also recruit the OG1cNAc transferase OGT. The OGT protein and the OG1cNAc modification of HCF-1 are both important for HCF-1pro repeat proteolysis. Interestingly, a human recombinant OGT purified from insect cells is able to induce cleavage of a HCF-1pro-repeat precursor in vitro, indicating that OGT either (i) induces HCF-1 autoproteolysis,(ii) is the HCF-1pro- repeat proteolytic activity itself, or (iii) physically associates with a proteolytic activity that is conserved in insect cells. In any case, OGT plays an important role in HCF-1 proteolytic maturation and perhaps a broader role in HCF-1 biological function. Résumé : Les modifications post-traductionelles pomme le clivage protéolytique, la phosphorylation, et la glycosylation, augmentent significativement la complexité des protéomes et permettent une régulation fine de l'activité de beaucoup de protéines. La protéine HCF-1, qui est un régulateur du cycle cellulaire et de la transcription, est elle- même régulée par clivage protéolytique. La protéine HCF-1 est en effet coupée en deux sous-unités qui s'associent l'une a l'autre pour former la protéine mature. Le précurseur de la protéine HCF-1 humaine est clivé à six sites correspondant à six séquences répétées nommées les HCF-1pro repeats, chacune composée de 26 acide aminés. Les HCF-1pro- repeats ne ressemblent ai aucune séquence de clivage protéolytique connue et sont présentes seulement dans les protéines HCF-1 chez les vertébrés. Bien que la maturation protéolytique d'HCF-1 soit essentielle pour les activités de cette protéine pendant le cycle cellulaire, les mécanismes qui la contrôlent restent inconnus. Au cours de mon travail de thèse, j'ai analysé les mécanismes de clivage protéolytique des protéines HCF dans différentes espèces. J'ai montré que la protéine de Drosophile homologue d'HCF-1 humaine nommée dHCF est clivée par une protéase nommée Taspase1. Ainsi, dHCF est clivé par la même protéase que celle qui induit la maturation protéolytique d'un des principaux facteurs du développement chez la mouche, la protéine Trithorax. La maturation de dHCF via le clivage par la Taspase1 n'est pas spécifique à la mouche, mais est probablement étendu à plusieurs protéines HCF chez les invertébrés, surtout dans les familles des insectes et des plathehninthes, car ces protéines HCF présentent des sites de reconnaissance pour la Taspasel. Par contre, les protéines HCF-1 chez les vertébrés n'ont pas de sites de reconnaissance pour la Taspasel et cela suggère que différents mécanismes de maturation des protéines HCF- ls ont apparu au cours de l'évolution. J'ai montré aussi que les HCF-1pro-repeats sont clivés par une activité protéolytique très difficile a identifier, car elle est résistante à la plupart des inhibiteurs de protéases, mais elle est très sensible au fractionnement biochimique. En plus, les HCF-1pro-repeats sont un site de protéolyse complexe qui ne sert pas seulement au clivage des protéines HCF- chez les vertébrés mais aussi à recruter l'enzyme responsable de la O- GlcNAcylation nommée OGT. La protéine OGT et la O-GlcNAcylatio d'HCF-1 sont toutes les deux importantes pour le clivage protéolytique des HCF1pro-repeats. Curieusement, la protéine OGT humaine produite dans des cellules d'insectes est capable de cliver les HCF-1pro repeats in vitro et cela suggère que OGT soit (i) induit le clivage autocatalytique cl'HCF-1, soit (ii) est elle-même l'activité protéolytique qui clive HCF4, soit (iii) est associée à une activité protéolytique conservée dans les cellules d'insectes qui a été co-purifiée avec OGT. En conclusion, OGT joue un rôle important dans la maturation protéolytique d'HCF-1 et peut-être aussi un rôle plus large dans les fonctions biologiques de la protéine HCF-1.

A new class of isothiocyanate-based irreversible inhibitors of macrophage migration inhibitory factor.

Macrophage migration inhibitory factor (MIF) is a homotrimeric multifunctional proinflammatory cytokine that has been implicated in the pathogenesis of several inflammatory and autoimmune diseases. Current therapeutic strategies for targeting MIF focus on developing inhibitors of its tautomerase activity or modulating its biological activities using anti-MIF neutralizing antibodies. Herein we report a new class of isothiocyanate (ITC)-based irreversible inhibitors of MIF. Modification by benzyl isothiocyanate (BITC) and related analogues occurred at the N-terminal catalytic proline residue without any effect on the oligomerization state of MIF. Different alkyl and arylalkyl ITCs modified MIF with nearly the same efficiency as BITC. To elucidate the mechanism of action, we performed detailed biochemical, biophysical, and structural studies to determine the effect of BITC and its analogues on the conformational state, quaternary structure, catalytic activity, receptor binding, and biological activity of MIF. Light scattering, analytical ultracentrifugation, and NMR studies on unmodified and ITC-modified MIF demonstrated that modification of Pro1 alters the tertiary, but not the secondary or quaternary, structure of the trimer without affecting its thermodynamic stability. BITC induced drastic effects on the tertiary structure of MIF, in particular residues that cluster around Pro1 and constitute the tautomerase active site. These changes in tertiary structure and the loss of catalytic activity translated into a reduction in MIF receptor binding activity, MIF-mediated glucocorticoid overriding, and MIF-induced Akt phosphorylation. Together, these findings highlight the role of tertiary structure in modulating the biochemical and biological activities of MIF and present new opportunities for modulating MIF biological activities in vivo.

Investigation of Two Bridge Alternatives for Low Volume Roads, Volume 1 of 2 Concept 1: Precast Steel Beam Units, HR-382, 1997

Recent reports have indicated that 23.5% of the nation's highway bridges are structurally deficient and 17.7% are functionally obsolete. A significant number of these bridges are on the Iowa secondary road system where over 86% of the rural bridge management responsibilities are assigned to the counties. Some of the bridges can be strengthened or otherwise rehabilitated, but many more are in need of immediate replacement. In a recent investigation (HR-365 "Evaluation of Bridge Replacement Alternatives for the County Bridge System") several types of replacement bridges that are currently being used on low volume roads were identified. It was also determined that a large number of counties (69%) have the ability and are interested in utilizing their own forces to design and construct short span bridges. In reviewing the results from HR-365, the research team developed one "new" bridge replacement concept and a modification of a replacement system currently being used. Both of these bridge replacement alternatives were investigated in this study, the results of which are presented in two volumes. This volume (Volume 1) presents the results of Concept 1 - Steel Beam Precast Units. Concept 2 - Modification of the Beam-in-Slab Bridge is presented in Volume 2. Concept 1, involves the fabrication of precast units (two steel beams connected by a concrete slab) by county work forces. Deck thickness is limited so that the units can be fabricated at one site and then transported to the bridge site where they are connected and the remaining portion of the deck placed. Since Concept 1 bridge is primarily intended for use on low-volume roads, the precast units can be constructed with new or used beams. In the experimental part of the investigation, there were three types of static load tests: small scale connector tests, "handling strength" tests, and service and overload tests of a model bridge. Three finite element models for analyzing the bridge in various states of construction were also developed. Small scale connector tests were completed to determine the best method of connecting the precast double-T (PCDT) units. "Handling strength" tests on an individual PCDT unit were performed to determine the strength and behavior of the precast unit in this configuration. The majority of the testing was completed on the model bridge [L=9,750 mm (32 ft), W=6,400 mm (21 ft)] which was fabricated using the precast units developed. Some of the variables investigated in the model bridge tests were number of connectors required to connect adjacent precast units, contribution of diaphragms to load distribution, influence of position of diaphragms on bridge strength and load distribution, and effect of cast-in-place portion of deck on load distribution. In addition to the service load tests, the bridge was also subjected to overload conditions. Using the finite element models developed, one can predict the behavior and strength of bridges similar to the laboratory model as well as design them. Concept 1 has successfully passed all laboratory testing; the next step is to field test it.

Investigation of Two Bridge Alternatives for Low Volume Roads - Phase II Volume 1 of 2 Concept 1: Steel Beam Precast Units, TR-410, 2000

This project continues the research which addresses the numerous bridge problems on the Iowa secondary road system. It is a continuation (Phase 2) of Project HR-382, in which two replacement alternatives (Concept 1: Steel Beam Precast Units and Concept 2: Modification of the Benton County Beam-in-Slab Bridge) were investigated. In previous research for concept 1, a precast unit bridge was developed through laboratory testing. The steel-beam precast unit bridge requires the fabrication of precast double-tee (PCDT) units, each consisting of two steel beams connected by a reinforced concrete deck. The weight of each PCDT unit is minimized by limiting the deck thickness to 4 in., which permits the units to be constructed off-site and then transported to the bridge site. The number of units required is a function of the width of bridge desired. Once the PCDT units are connected, a cast-in-place reinforced concrete deck is cast over the PCDT units and the bridge railing attached. Since the steel beam PCDT unit bridge design is intended primarily for use on low-volume roads, used steel beams can be utilized for a significant cost savings. In previous research for concept 2, an alternate shear connector (ASC) was developed and subjected to static loading. In this investigation, the ASC was subjected to cyclic loading in both pushout specimens and composite beam tests. Based on these tests, the fatigue strength of the ASC was determined to be significantly greater than that required in typical low volume road single span bridges. Based upon the construction and service load testing, the steel-beam precast unit bridge was successfully shown to be a viable low volume road bridge alternative. The construction process utilized standard methods resulting in a simple system that can be completed with a limited staff. Results from the service load tests indicated adequate strength for all legal loads. An inspection of the bridge one year after its construction revealed no change in the bridge's performance. Each of the systems previously described are relatively easy to construct. Use of the ASC rather than the welded studs significantly simplified the work, equipment, and materials required to develop composite action between the steel beams and the concrete deck.

Investigation of Two Bridge Alternatives for Low Volume Roads Volume 2 of 2 Concept 2: Beam In Slab Bridge, HR-382, 1997

Recent reports have indicated that 23.5% of the nation's highway bridges are structurally deficient and 17.7% are functionally obsolete. A significant number of these bridges are on the Iowa secondary road system where over 86% of the rural bridge management responsibilities are assigned to the counties. Some of the bridges can be strengthened or otherwise rehabilitated, but many more are in need of immediate replacement. In a recent investigation (HR-365 "Evaluation of Bridge Replacement Alternatives for the County Bridge System") several types of replacement bridges that are currently being used on low volume roads were identified. It was also determined that a large number of counties (69%) have the ability and are interested in utilizing their own forces to design and construct short span bridges. After reviewing the results from HR-365, the research team developed one "new" bridge replacement concept and a modification of a replacement system currently being used. Both of these bridge replacement alternatives were investigated in this study, the results of which are presented in two volumes. This volume (Volume 2) presents the results of Concept 2 - Modification of the Beam-in-Slab Bridge. Concept 1 - Steel Beam Precast Units is presented in Volume 1. Concept 2 involves various laboratory tests of the Beam-in-Slab bridge (BISB) currently being used by Benton County and several other Iowa counties. In this investigation, the behavior and strength of the BISB were determined; a new method of obtaining composite action between the steel beams and concrete was also tested. Since the Concept 2 bridge is primarily intended for use on low-volume roads, the system can be constructed with new or used beams. In the experimental part of the investigation, there were three types of laboratory tests: push-out tests, service and ultimate load tests of models of the BISB, and composite beam tests utilizing the newly developed shear connection. In addition to the laboratory tests, there was a field test in which an existing BISB was service load tested. An equation was developed for predicting the strength of the shear connection investigated; in addition, a finite element model for analyzing the BISB was also developed. Push-out tests were completed to determine the strength of the recently developed shear connector. A total of 36 specimens were tested, with variables such as hole diameter, hole spacing, presence of reinforcement, etc. being investigated. In the model tests of the BISB, two and four beam specimens [L=9,140 mm (30 ft)] were service load tested for behavior and load distribution data. Upon completion of these tests, both specimens were loaded to failure. In the composite beam tests, four beams, one with standard shear studs and three using the shear connection developed, were tested. Upon completion of the service load tests, all four beams were loaded to failure. The strength and behavior of the beams with the new shear connection were found to be essentially the same as that of the specimen with standard shear studs.

Role of the epithelial sodium channel (ENaC) in the epidermal barrier function of the skin

Abstract In humans, the skin is the largest organ of the body, covering up to 2m2 and weighing up to 4kg in an average adult. Its function is to preserve the body from external insults and also to retain water inside. This barrier function termed epidermal permeability barrier (EPB) is localized in the functional part of the skin: the epidermis. For this, evolution has built a complex structure of cells and lipids sealing the surface, the stratum corneum. The formation of this structure is finely tuned since it is not only formed once at birth, but renewed all life long. This active process gives a high plasticity and reactivity to skin, but also leads to various pathologies. ENaC is a sodium channel extensively studied in organs like kidney and lung due to its importance in regulating sodium homeostasis and fluid volume. It is composed of three subunits α, ß and r which are forming sodium selective channel through the cell membrane. Its presence in the skin has been demonstrated, but little is known about its physiological role. Previous work has shown that αENaC knockout mice displayed an abnormal epidermis, suggesting a role in differentiation processes that might be implicated in the EPB. The principal aim of this thesis has been to study the consequences for EPB function in mice deficient for αENaC by molecular and physiological means and to investigate the underlying molecular mechanisms. Here, the barrier function of αENaC knockout pups is impaired. Apparently not immediately after birth (permeability test) but 24h later, when evident water loss differences appeared compared to wildtypes. Neither the structural proteins of the epithelium nor the tights junctions showed any obvious alterations. In contrary, stratum corneum lipid disorders are most likely responsible for the barrier defect, accompanied by an impairment of skin surface acidification. To analyze in details this EPB defect, several hypotheses have been proposed: reduced sensibility to calcium which is the key activator far epidermal formation, or modification of ENaC-mediated ion fluxes/currents inside the epidermis. The cellular localization of ENaC and the action in the skin of CAPl, a positive regulator of ENaC, have been also studied in details. In summary, this study clearly demonstrates that ENaC is a key player in the EPB maintenance, because αENaC knockout pups are not able to adapt to the new environment (ex utero) as efficiently as the wildtypes, most likely due to impaired of sodium handling inside the epidermis. Résumé Chez l'homme, la peau est le plus grand organe, couvrant presque 2m2 et pesant près de 4kg chez l'adulte. Sa fonction principale est de protéger l'organisme des agressions extérieures mais également de conserver l'eau à l'intérieur du corps. Cette fonction nommée barrière épithéliale est localisée dans la partie fonctionnelle de la peau : l'épiderme. A cette fin, l'évolution s'est dotée d'une structure complexe composée de cellules et de lipides recouvrant la surface, la couche cornée. Sa formation est finement régulée, car elle n'est pas seulement produite à la naissance mais constamment renouvelée tout au long de la vie, ce qui lui confère une grande plasticité mais ce qui est également la cause de nombreuses pathologies. ENaC est un canal sodique très étudié dans le rein et le poumon pour son importance dans la régulation de l'homéostasie sodique et la régulation du volume du milieu intérieur. Il est composé de 3 sous unités, α, ß et y qui forment un pore sélectif pour le sodium dans les membranes. Ce canal est présent dans la peau mais sa fonction n'y est pas connue. Des travaux précédents ont pu montrer que les souris dont le gène codant pour αENaC a été invalidé présentent un épiderme pathologique, suggérant un rôle dans la différentiation et pourrait même être impliqué dans la barrière épithéliale. Le but de cette thèse fut l'étude de la barrière dans ces souris knockouts avec des méthodes moléculaires et physiologiques et la caractérisation des mécanismes moléculaire impliqués. Dans ce travail, il a été montré que les souris mutantes présentaient un défaut de la barrière. Ce défaut n'est pas visible immédiatement à la naissance (test de perméabilité), mais 24h plus tard, lorsque les tests de perte d'eau transépithéliale montrent une différence évidente avec les animaux contrôles. Ni les protéines de structures ni les jonctions serrées de l'épiderme ne présentaient d'imperfections majeures. A l'inverse, les lipides de la couche cornée présentaient un problème de maturation (expliquant le phénotype de la barrière), certainement consécutif au défaut d'acidification à la surface de la peau que nous avons observé. D'autres mécanismes ont été explorées afin d'investiguer cette anomalie de la barrière, comme la réduction de sensibilité au calcium qui est le principal activateur de la formation de l'épiderme, ou la modification des flux d'ions entre les couches de l'épiderme. La localisation cellulaire d'ENaC, et l'action de son activateur CAPl ont également été étudiés en détails. En résumé, cette étude démontre clairement qu'ENaC est un acteur important dans la formation de la barrière épithéliale, car la peau des knockouts ne s'adapte pas aussi bien que celle des sauvages au nouvel environnement ex utero à cause de la fonction d'ENaC dans les mouvements de sodium au sein même de l'épiderme. Résumé tout public Chez l'homme, la peau est le plus grand organe, couvrant presque 2m2 et pesant près de 4kg chez l'adulte. Sa fonction principale est de protéger l'organisme des agressions extérieures mais également de conserver l'eau à l'intérieur du corps. Cette fonction nommée barrière épithéliale est localisée dans la partie fonctionnelle de la peau : l'épiderme. A cette fin, l'évolution s'est dotée d'une structure complexe composée de cellules et de lipides recouvrant la surface, la couche cornée. Sa formation est finement régulée, car elle n'est pas seulement produite à la naissance mais constamment renouvelée tout au long de la vie, ce qui lui confère une grande plasticité mais ce qui est également la cause de nombreuses maladies. ENaC est une protéine formant un canal qui permet le passage sélectif de l'ion sodium à travers la paroi des cellules. Il est très étudié dans le rein pour son importance dans la récupération du sel lors de la concentration de l'urine. Ce canal est présent dans la peau mais sa fonction n'y est pas connue. Des travaux précédents ont pu montrer que les souris où le gène codant pour αENaC a été invalidé présentent un épiderme pathologique, suggérant un rôle dans la peau et plus particulièrement la fonction de barrière de l'épiderme. Le but de cette thèse fut l'étude de la fonction de barrière dans ces souris mutantes, au niveau tissulaire et cellulaire. Dans ce travail, il a été montré que les souris mutantes présentaient une peau plus perméable que celle des animaux contrôles, grâce à une machine mesurant la perte d'eau à travers la peau. Ce défaut n'est visible que 24h après la naissance, mais nous avons pu montrer que les animaux mutants perdaient quasiment 2 fois plus d'eau que les contrôles. Au niveau moléculaire, nous avons pu montrer que ce défaut provenait d'un problème de maturation des lipides qui composent la barrière de la peau. Cette maturation est incomplète vraisemblablement à cause d'un défaut de mouvement des ions dans les couches les plus superficielles de l'épiderme, et cela à cause de l'absence du canal ENaC. En résumé, cette étude démontre clairement qu'ENaC est un acteur important dans la formation de la barrière épithéliale, car la peau des mutants ne s'adapte pas aussi bien que celle des sauvages au nouvel environnement ex utero à cause de la fonction d'ENaC dans les mouvements de sodium au sein même de l'épiderme.

Investigation of Two Bridge Alternatives for Low Volume Roads - Phase II Volume 2 of 2, Concept 2: Beam in Slab Bridge, TR-410, 2000

This project continues the research which addresses the numerous bridge problems on the Iowa secondary road system. It is a continuation (Phase 2) of Project HR-382, in which two replacement alternatives (Concept 1: Steel Beam Precast Units and Concept 2: Modification of the Benton County Beam-in-Slab Bridge) were investigated. In previous research for concept 1, a precast unit bridge was developed through laboratory testing. The steel-beam precast unit bridge requires the fabrication of precast double-tee (PCDT) units, each consisting of two steel beams connected by a reinforced concrete deck. The weight of each PCDT unit is minimized by limiting the deck thickness to 4 in., which permits the units to be constructed off-site and then transported to the bridge site. The number of units required is a function of the width of bridge desired. Once the PCDT units are connected, a cast-in-place reinforced concrete deck is cast over the PCDT units and the bridge railing attached. Since the steel beam PCDT unit bridge design is intended primarily for use on low-volume roads, used steel beams can be utilized for a significant cost savings. In previous research for concept 2, an alternate shear connector (ASC) was developed and subjected to static loading. In this investigation, the ASC was subjected to cyclic loading in both pushout specimens and composite beam tests. Based on these tests, the fatigue strength of the ASC was determined to be significantly greater than that required in typical low volume road single span bridges. Based upon the construction and service load testing, the steel-beam precast unit bridge was successfully shown to be a viable low volume road bridge alternative. The construction process utilized standard methods resulting in a simple system that can be completed with a limited staff. Results from the service load tests indicated adequate strength for all legal loads. An inspection of the bridge one year after its construction revealed no change in the bridge's performance. Each of the systems previously described are relatively easy to construct. Use of the ASC rather than the welded studs significantly simplified the work, equipment, and materials required to develop composite action between the steel beams and the concrete deck.

Void Ratio and Shear Strength of Two Compacted Crushed Stones, Progress Report, HR-99

Triaxial compression tests of two crushed limestones of differing highway service records indicate a fundamental difference in their shear strength -- void ratio relationship. Analyses were based on stress parameters at minimum sample volume, i.e., before there was significant sample dilation due to shear. The better service record sample compacted to higher density, and had a high effective angle of internal friction and zero effective cohesion. The other sample compacted to lower density and had a lower friction angle, but gained significant stability from effective cohesion. Repeated loading-unloading cycles reduced the cohesion, apparently due to modification of the sample structure. Extrapolations of the results to zero void ratio agree with sliding friction data reported on calcite, or with triaxial parameters reported on carbonate rocks.

Learning from failure - rationale and design for a study about discontinuation of randomized trials (DISCO study).

BACKGROUND: Randomized controlled trials (RCTs) may be discontinued because of apparent harm, benefit, or futility. Other RCTs are discontinued early because of insufficient recruitment. Trial discontinuation has ethical implications, because participants consent on the premise of contributing to new medical knowledge, Research Ethics Committees (RECs) spend considerable effort reviewing study protocols, and limited resources for conducting research are wasted. Currently, little is known regarding the frequency and characteristics of discontinued RCTs. METHODS/DESIGN: Our aims are, first, to determine the prevalence of RCT discontinuation for specific reasons; second, to determine whether the risk of RCT discontinuation for specific reasons differs between investigator- and industry-initiated RCTs; third, to identify risk factors for RCT discontinuation due to insufficient recruitment; fourth, to determine at what stage RCTs are discontinued; and fifth, to examine the publication history of discontinued RCTs.We are currently assembling a multicenter cohort of RCTs based on protocols approved between 2000 and 2002/3 by 6 RECs in Switzerland, Germany, and Canada. We are extracting data on RCT characteristics and planned recruitment for all included protocols. Completion and publication status is determined using information from correspondence between investigators and RECs, publications identified through literature searches, or by contacting the investigators. We will use multivariable regression models to identify risk factors for trial discontinuation due to insufficient recruitment. We aim to include over 1000 RCTs of which an anticipated 150 will have been discontinued due to insufficient recruitment. DISCUSSION: Our study will provide insights into the prevalence and characteristics of RCTs that were discontinued. Effective recruitment strategies and the anticipation of problems are key issues in the planning and evaluation of trials by investigators, Clinical Trial Units, RECs and funding agencies. Identification and modification of barriers to successful study completion at an early stage could help to reduce the risk of trial discontinuation, save limited resources, and enable RCTs to better meet their ethical requirements.

High prevalence of the metabolic syndrome in HIV-infected patients: impact of different definitions of the metabolic syndrome.

INTRODUCTION: This study describes the characteristics of the metabolic syndrome in HIV-positive patients in the Data Collection on Adverse Events of Anti-HIV Drugs study and discusses the impact of different methodological approaches on estimates of the prevalence of metabolic syndrome over time. METHODS: We described the prevalence of the metabolic syndrome in patients under follow-up at the end of six calendar periods from 2000 to 2007. The definition that was used for the metabolic syndrome was modified to take account of the use of lipid-lowering and antihypertensive medication, measurement variability and missing values, and assessed the impact of these modifications on the estimated prevalence. RESULTS: For all definitions considered, there was an increasing prevalence of the metabolic syndrome over time, although the prevalence estimates themselves varied widely. Using our primary definition, we found an increase in prevalence from 19.4% in 2000/2001 to 41.6% in 2006/2007. Modification of the definition to incorporate antihypertensive and lipid-lowering medication had relatively little impact on the prevalence estimates, as did modification to allow for missing data. In contrast, modification to allow the metabolic syndrome to be reversible and to allow for measurement variability lowered prevalence estimates substantially. DISCUSSION: The prevalence of the metabolic syndrome in cohort studies is largely based on the use of nonstandardized measurements as they are captured in daily clinical care. As a result, bias is easily introduced, particularly when measurements are both highly variable and may be missing. We suggest that the prevalence of the metabolic syndrome in cohort studies should be based on two consecutive measurements of the laboratory components in the syndrome definition.

Model-based iterative reconstruction in pediatric chest CT: assessment of image quality in a prospective study of children with cystic fibrosis.

BACKGROUND: The potential effects of ionizing radiation are of particular concern in children. The model-based iterative reconstruction VEO(TM) is a technique commercialized to improve image quality and reduce noise compared with the filtered back-projection (FBP) method. OBJECTIVE: To evaluate the potential of VEO(TM) on diagnostic image quality and dose reduction in pediatric chest CT examinations. MATERIALS AND METHODS: Twenty children (mean 11.4 years) with cystic fibrosis underwent either a standard CT or a moderately reduced-dose CT plus a minimum-dose CT performed at 100 kVp. Reduced-dose CT examinations consisted of two consecutive acquisitions: one moderately reduced-dose CT with increased noise index (NI = 70) and one minimum-dose CT at CTDIvol 0.14 mGy. Standard CTs were reconstructed using the FBP method while low-dose CTs were reconstructed using FBP and VEO. Two senior radiologists evaluated diagnostic image quality independently by scoring anatomical structures using a four-point scale (1 = excellent, 2 = clear, 3 = diminished, 4 = non-diagnostic). Standard deviation (SD) and signal-to-noise ratio (SNR) were also computed. RESULTS: At moderately reduced doses, VEO images had significantly lower SD (P < 0.001) and higher SNR (P < 0.05) in comparison to filtered back-projection images. Further improvements were obtained at minimum-dose CT. The best diagnostic image quality was obtained with VEO at minimum-dose CT for the small structures (subpleural vessels and lung fissures) (P < 0.001). The potential for dose reduction was dependent on the diagnostic task because of the modification of the image texture produced by this reconstruction. CONCLUSIONS: At minimum-dose CT, VEO enables important dose reduction depending on the clinical indication and makes visible certain small structures that were not perceptible with filtered back-projection.

Influence on present-day coastal dynamics and evolution of a relict subaqueous delta lobe: Sol de Riu lobe, Ebro Delta. Continental Shelf Research, 74: 94-104. doi:10.1016/j.csr.2013.11.021

We used high-resolution swath-bathymetry data to characterise the morphology of the abandoned subaqueous Sol de Riu delta lobe in the Ebro Delta, Western Mediterranean Sea. This study aims to assess the influence of an abandoned delta lobe on present-day coastal dynamics in a micro-tidal environment. Detailed mapping of the relict Sol de Riu lobe also showed a set of bedforms interpreted as footprints of human activities: seasonal V-shaped depressions on the middle shoreface due to boat anchoring and old trawling marks between 16 and 18 m water depth. Estimations of the mobility of bottom sediment showed that the shallowest shoreface (i.e. less than 7 m depth) is the most dynamic part of the relict lobe, while the middle shoreface experienced significant morphological changes since the lobe was abandoned. The deepest shoreface (i.e. water depth in excess of 15 m), which corresponds to the front of the lobe, is defined by a very small potential for morphological change. Simulations showed that while the relict lobe does not significantly affect the typical short period waves (Tp ≈4 s) in the study area, it does interfere with the most energetic wave conditions (Tp ≥ 7 s) acting as a shoal leading to the concentration of wave energy along the shoreline northwest of the lobe. The consequence of such modification of the high-energy wave propagation pattern by the relict lobe is an alteration of the wave-induced littoral sediment dynamics with respect to a situation without the lobe.

Microstructural evolution of primary crystallization in diffusion-controlled grain growth

A model has been developed for evaluating grain size distributions in primary crystallizations where the grain growth is diffusion controlled. The body of the model is grounded in a recently presented mean-field integration of the nucleation and growth kinetic equations, modified conveniently in order to take into account a radius-dependent growth rate, as occurs in diffusion-controlled growth. The classical diffusion theory is considered, and a modification of this is proposed to take into account interference of the diffusion profiles between neighbor grains. The potentiality of the mean-field model to give detailed information on the grain size distribution and transformed volume fraction for transformations driven by nucleation and either interface- or diffusion-controlled growth processes is demonstrated. The model is evaluated for the primary crystallization of an amorphous alloy, giving an excellent agreement with experimental data. Grain size distributions are computed, and their properties are discussed.

Determination and Evaluation of Alternate Methods for Managing and Controlling Highway-Related Dust, TR-449, 2002

Road dust is caused by wind entraining fine material from the roadway surface and the main source of Iowa road dust is attrition of carbonate rock used as aggregate. The mechanisms of dust suppression can be considered as two processes: increasing particle size of the surface fines by agglomeration and inhibiting degradation of the coarse material. Agglomeration may occur by capillary tension in the pore water, surfactants that increase bonding between clay particles, and cements that bind the mineral matter together. Hygroscopic dust suppressants such as calcium chloride have short durations of effectiveness because capillary tension is the primary agglomeration mechanism. Somewhat more permanent methods of agglomeration result from chemicals that cement smaller particles into a mat or larger particles. The cements include lignosulfonates, resins, and asphalt products. The duration of the cements depend on their solubility and the climate. The only dust palliative that decreases aggregate degradation is shredded shingles that act as cushions between aggregate particles. It is likely that synthetic polymers also provide some protection against coarse aggregate attrition. Calcium chloride and lignosulfonates are widely used in Iowa. Both palliatives have a useful duration of about 6 months. Calcium chloride is effective with surface soils of moderate fine content and plasticity whereas lignin works best with materials that have high fine content and high plasticity indices. Bentonite appears to be effective for up to two years and works well with surface materials having low fines and plasticity and works well with limestone aggregate. Selection of appropriate dust suppressants should be based on characterization of the road surface material. Estimation of dosage rates for potential palliatives can be based on data from this report, from technical reports, information from reliable vendors, or laboratory screening tests. The selection should include economic analysis of construction and maintenance costs. The effectiveness of the treatment should be evaluated by any of the field performance measuring techniques discussed in this report. Novel dust control agents that need research for potential application in Iowa include; acidulated soybean oil (soapstock), soybean oil, ground up asphalt shingles, and foamed asphalt. New laboratory evaluation protocols to screen additives for potential effectiveness and determine dosage are needed. A modification of ASTM D 560 to estimate the freeze-thaw and wet-dry durability of Portland cement stabilized soils would be a starting point for improved laboratory testing of dust palliatives.

Selecting highly affine and well-expressed TCRs for gene therapy of melanoma.

A recent phase 1 trial has demonstrated that the generation of tumor-reactive T lymphocytes by transfer of specific T-cell receptor (TCR) genes into autologous lymphocytes is feasible. However, compared with results obtained by infusion of tumor-infiltrating lymphocytes, the response rate observed in this first TCR gene therapy trial is low. One strategy that is likely to enhance the success rate of TCR gene therapy is the use of tumor-reactive TCRs with a higher capacity for tumor cell recognition. We therefore sought to develop standardized procedures for the selection of well-expressed, high-affinity, and safe human TCRs. Here we show that TCR surface expression can be improved by modification of TCR alpha and beta sequences and that such improvement has a marked effect on the in vivo function of TCR gene-modified T cells. From a panel of human, melanoma-reactive TCRs we subsequently selected the TCR with the highest affinity. Furthermore, a generally applicable assay was used to assess the lack of alloreactivity of this TCR against a large series of common human leukocyte antigen alleles. The procedures described in this study should be of general value for the selection of well- and stably expressed, high-affinity, and safe human TCRs for subsequent clinical testing.