Inheritance of seed coat color in sesame

The objective of this work was to determine the inheritance mode of seed coat color in sesame. Two crosses and their reciprocals were performed: UCLA37 x UCV3 and UCLA90 x UCV3, of which UCLA37 and UCLA90 are white seed, and UCV3 is brown seed. Results of reciprocal crosses within each cross were identical: F1 seeds had the same phenotype as the maternal parent, and F2 resulted in the phenotype brown color. These results are consistent only with the model in which the maternal effect is the responsible for this trait. This model was validated by recording the seed coat color of 100 F2 plants (F3 seeds) from each cross with its reciprocal, in which the 3:1 expected ratio for plants producing brown and white seeds was tested with the chi-square test. Sesame seed color is determined by the maternal genotype. Proposed names for the alleles participating in sesame seed coat color are: Sc1, for brown color; and Sc2, for white color; Sc1 is dominant over Sc2.

Cross-sectional analysis of testosterone therapies in hypopituitary men on stable pituitary hormone replacement.

OBJECTIVE: The last decade has seen a proliferation in options for testosterone replacement. However, little is known as to the benefits of different treatment modalities. Our objective was to determine the testosterone prescription pattern and to examine the impact on various outcome measures. SUBJECTS AND METHODS: A total of 816 adult-onset hypopituitary males on stable pituitary replacement for at least 1 year were identified from the KIMS database. Patients were classified as either eugonadal (n = 106), or hypogonadal (n = 710) on intramuscular (IM, n = 558), oral (n = 74), transdermal (n = 61), and depot (n = 17) testosterone. RESULTS: After 1 year of stable pituitary replacement therapy, body composition, cardiovascular parameters, GH replacement and quality of life were not significantly different in androgen-replaced hypogonadal patients compared to eugonadal patients. There were no differences in outcome variables within the hypogonadal group according to the testosterone replacement regimen used and no difference in response to GH therapy. CONCLUSIONS: The majority of hypopituitary patients in the last decade have received IM testosterone. Body composition, cardiovascular parameters, GH replacement and quality of life were not different between eugonadal and hypogonadal patients and were not differentially affected by the mode of testosterone replacement. These findings are reassuring that there is no major difference in response to different testosterone replacement regimens.

Characterization of rue extract and its potential for controlling rice blast

Abstract: The objective of this work was to purify and standardize the rue (Ruta graveolens) extract and evaluate its effect on Magnaporthe oryzae as an alternative to the integrated management of rice blast. The drug was characterized, the liquid extract was obtained, and the methodology for quantifying the standard markers psoralen and bergapten was validated. Rue extract and the markers, solely or in combination, were assayed in vitro, as well as in greenhouse conditions, for their ability to suppress leaf blast, by the evaluation of mycelial growth, conidial germination, and appressorium formation. Rue extract inhibited M. oryzae mycelial growth (100%), conidial germination (LD50=0.237 mg), and the appressorium formation (LD50=0.121 mg); besides, the extract reduced leaf blast severity by 80.84%. Fluorescence microscopy showed that rue extract did not damage M. oryzae cell wall and plasma membrane, indicating another mode of action. Rue extract has a great potential for controlling rice leaf blast.

Phylogenetic position of Fit insect toxin producing pseudomonads

Fit produced by Pseudomonas fluorescens CHA0 is a novel insect toxin in root colonizing pseudomonads, of which a homologue is described in Photorhabdus species.However, occurrence and abundance of insect pathogenicity in plant-associated pseudomonads is still unclear. An extensive screening outside the P. fluorescens complex identified strains of Pseudomonas chlororaphis as further Fit toxin producing candidates. Sequences of five different P. chlororaphis strains generated in this study were used to reconstruct the evolutionary history of the Fit toxin gene and to analyse its mode of evolution. We found that P. chlororaphis is closely associated with a small subgroup of 2,4-diacetylphloroglucinol and pyoluteorin- producing pseudomonads, both when analyzing four housekeeping genes and the nucleotide sequences for the Fit toxin gene. Additionally, we identified purifying selection to be the predominant mode of Fit toxin evolution.

How Reliable Is Ki-67 Immunohistochemistry in Grade 2 Breast Carcinomas? A QA Study of the Swiss Working Group of Breast- and Gynecopathologists.

Adjuvant chemotherapy decisions in breast cancer are increasingly based on the pathologist's assessment of tumor proliferation. The Swiss Working Group of Gyneco- and Breast Pathologists has surveyed inter- and intraobserver consistency of Ki-67-based proliferative fraction in breast carcinomas. METHODS: Five pathologists evaluated MIB-1-labeling index (LI) in ten breast carcinomas (G1, G2, G3) by counting and eyeballing. In the same way, 15 pathologists all over Switzerland then assessed MIB-1-LI on three G2 carcinomas, in self-selected or pre-defined areas of the tumors, comparing centrally immunostained slides with slides immunostained in the different laboratoires. To study intra-observer variability, the same tumors were re-examined 4 months later. RESULTS: The Kappa values for the first series of ten carcinomas of various degrees of differentiation showed good to very good agreement for MIB-1-LI (Kappa 0.56-0.72). However, we found very high inter-observer variabilities (Kappa 0.04-0.14) in the read-outs of the G2 carcinomas. It was not possible to explain the inconsistencies exclusively by any of the following factors: (i) pathologists' divergent definitions of what counts as a positive nucleus (ii) the mode of assessment (counting vs. eyeballing), (iii) immunostaining technique, and (iv) the selection of the tumor area in which to count. Despite intensive confrontation of all participating pathologists with the problem, inter-observer agreement did not improve when the same slides were re-examined 4 months later (Kappa 0.01-0.04) and intra-observer agreement was likewise poor (Kappa 0.00-0.35). CONCLUSION: Assessment of mid-range Ki-67-LI suffers from high inter- and intra-observer variability. Oncologists should be aware of this caveat when using Ki-67-LI as a basis for treatment decisions in moderately differentiated breast carcinomas.

Breaking up the writing process: how wikis can support understanding the composition and revision strategies of young writers

Understanding how best to support immature writers in the development of their understanding of the writing process is an important concern for researchers and teachers. Social technologies have become key features of leisure and work place writing, yet knowledge about how to design educational settings that take full advantage of the affordances of web 2.0 technologies to support early writing is scarce. This paper presents a small scale study that investigated how writing in a wiki environment might facilitate and support students’ use of composition and revision strategies. Our findings show that wiki can enlarge young writers’ experience of the process of composition and revision both through their own efforts and by observing the process in others. In this study students employed a wide range of types of revisions both surface and text based changes. These revisions took place during the process of composition as well as at the end. It is argued here that writing in a wiki not only provides young writers with experience of a mode of composition prevalent in the contemporary work environment, but breaks up the process of writing in a way that may support students’ understanding of the processes of composition and revision.

Proximity of excitatory synapses and astroglial gap junctions in layer IV of the mouse barrel cortex.

Neurons and astrocytes, the two major cell populations in the adult brain, are characterized by their own mode of intercellular communication--the synapses and the gap junctions (GJ), respectively. In addition, there is increasing evidence for dynamic and metabolic neuroglial interactions resulting in the modulation of synaptic transmission at the so-called "tripartite synapse". Based on this, we have investigated at the ultrastructural level how excitatory synapses (ES) and astroglial GJ are spatially distributed in layer IV of the barrel cortex of the adult mouse. We used specific antibodies for connexin (Cx) 30 and 43 to identify astroglial GJ, these two proteins are known to be present in the majority of astroglial GJ in the cerebral cortex. In electron-microscopic images, we measured the distance between two ES, between two GJ and between a GJ and its nearest ES. We found a ratio of two GJ per three ES in the hollow and septal areas. Taking into account the size of an astrocyte domain, the high density of GJ suggests the occurrence of reflexive type, i.e. GJ between processes of the same astrocyte. Interestingly, the distance between an ES and an astroglial GJ was found to be significantly lower than that between either two synapses or between two GJ. These observations indicate that the two modes of cell-to-cell communication are not randomly distributed in layer IV of the barrel cortex. Consequently, this feature may provide the morphological support for the recently reported functional interactions between neuronal circuits and astroglial networks.

Evolutionary steps in the reproductive biology of Annonaceae

Flowers of Annonaceae are characterized by fleshy petals, many stamens with hard connective shields and numerous carpels with sessile stigmas often covered by sticky secretions. The petals of many representatives during anthesis form a closed pollination chamber. Protogynous dichogamy with strong scent emissions especially during the pistillate stage is a character of nearly all species. Scent emissions can be enhanced by thermogenesis. The prevailing reproductive system in the family seems to be self-compatibility. The basal genus Anaxagorea besides exhibiting several ancestral morphological characters has also many characters which reappear in other genera. Strong fruit-like scents consisting of fruit-esters and alcohols mainly attract small fruit-beetles (genus Colopterus, Nitidulidae) as pollinators, as well as several other beetles (Curculionidae, Chrysomelidae) and fruit-flies (Drosophilidae), which themselves gnaw on the thick petals or their larvae are petal or ovule predators. The flowers and the thick petals are thus a floral brood substrate for the visitors and the thick petals of Anaxagorea have to be interpreted as an antipredator structure. Another function of the closed thick petals is the production of heat by accumulated starch, which enhances scent emission and provides a warm shelter for the attracted beetles. Insight into floral characters and floral ecology of Anaxagorea, the sister group of the rest of the Annonaceae, is particularly important for understanding functional evolution and diversification of the family as a whole. As beetle pollination (cantharophily) is plesiomorphic in Anaxagorea and in Annonaceae, characters associated with beetle pollination appear imprinted in members of the whole family. Pollination by beetles (cantharophily) is the predominant mode of the majority of species worldwide. Examples are given of diurnal representatives (e.g., Guatteria, Duguetia, Annona) which function on the basis of fruit-imitating flowers attracting mainly fruit-inhabiting nitidulid beetles, as well as nocturnal species (e.g., large-flowered Annona and Duguetia species), which additionally to most of the diurnal species exhibit strong flower warming and provide very thick petal tissues for the voracious dynastid scarab beetles (Dynastinae, Scarabaeidae). Further examples will show that a few Annonaceae have adapted in their pollination also to thrips, flies, cockroaches and even bees. Although this non-beetle pollinated species have adapted in flower structure and scent compounds to their respective insects, they still retain some of the specialized cantharophilous characters of their ancestors.

Impact of Study Design on Reported Incidences of Acute Mountain Sickness: A Systematic Review.

AIMS: Published incidences of acute mountain sickness (AMS) vary widely. Reasons for this variation, and predictive factors of AMS, are not well understood. We aimed to identify predictive factors that are associated with the occurrence of AMS, and to test the hypothesis that study design is an independent predictive factor of AMS incidence. We did a systematic search (Medline, bibliographies) for relevant articles in English or French, up to April 28, 2013. Studies of any design reporting on AMS incidence in humans without prophylaxis were selected. Data on incidence and potential predictive factors were extracted by two reviewers and crosschecked by four reviewers. Associations between predictive factors and AMS incidence were sought through bivariate and multivariate analyses for different study designs separately. Association between AMS incidence and study design was assessed using multiple linear regression. RESULTS: We extracted data from 53,603 subjects from 34 randomized controlled trials, 44 cohort studies, and 33 cross-sectional studies. In randomized trials, the median of AMS incidences without prophylaxis was 60% (range, 16%-100%); mode of ascent and population were significantly associated with AMS incidence. In cohort studies, the median of AMS incidences was 51% (0%-100%); geographical location was significantly associated with AMS incidence. In cross-sectional studies, the median of AMS incidences was 32% (0%-68%); mode of ascent and maximum altitude were significantly associated with AMS incidence. In a multivariate analysis, study design (p=0.012), mode of ascent (p=0.003), maximum altitude (p<0.001), population (p=0.002), and geographical location (p<0.001) were significantly associated with AMS incidence. Age, sex, speed of ascent, duration of exposure, or history of AMS were inconsistently reported and therefore not further analyzed. CONCLUSIONS: Reported incidences and identifiable predictive factors of AMS depend on study design.

Dépistage du risque d'allergie et prévention en maternité : enquête des pratiques AllerNaiss [Screening for the risk of allergy and prevention in French maternity units: A survey].

Allergy has been on the rise for half a century and concerns nearly 30% of children; it has now become a real public health problem. The guidelines on prevention of allergy set up by the French Society of Paediatrics (SFP) and the European Society of Paediatric Allergology and Clinical Immunology (ESPACI) are based on screening children at risk through a systematic search of the family history and recommend, for children at risk, exclusive breastfeeding whenever possible or otherwise utilization of hypoallergenic infant formula, which has demonstrated efficacy. The AllerNaiss practice survey assessed the modes of screening and prevention of allergy in French maternity units in 2012. The SFP guidelines are known by 82% of the maternity units that took part in the survey, and the ESPACI guidelines by 55% of them. A screening strategy is in place in 59% of the participating maternity wards, based on local consensus for 36% of them, 13% of the units having a written screening procedure. Screening is based on the search for a history of allergy in first-degree relatives (99%) during pregnancy (51%), in the delivery room (50%), and after delivery (89%). A mode of prevention of the risk of allergy exists in 62% of the maternity units, most often in writing (49%). A hypoallergenic infant formula is prescribed for non-breastfed children in 90% of the units. The survey shows that there is a real need for formalization of allergy risk screening and prevention of allergy in newborns in French maternity units.

Missense mutations in TENM4, a regulator of axon guidance and central myelination, cause essential tremor.

Essential tremor (ET) is a common movement disorder with an estimated prevalence of 5% of the population aged over 65 years. In spite of intensive efforts, the genetic architecture of ET remains unknown. We used a combination of whole-exome sequencing and targeted resequencing in three ET families. In vitro and in vivo experiments in oligodendrocyte precursor cells and zebrafish were performed to test our findings. Whole-exome sequencing revealed a missense mutation in TENM4 segregating in an autosomal-dominant fashion in an ET family. Subsequent targeted resequencing of TENM4 led to the discovery of two novel missense mutations. Not only did these two mutations segregate with ET in two additional families, but we also observed significant over transmission of pathogenic TENM4 alleles across the three families. Consistent with a dominant mode of inheritance, in vitro analysis in oligodendrocyte precursor cells showed that mutant proteins mislocalize. Finally, expression of human mRNA harboring any of three patient mutations in zebrafish embryos induced defects in axon guidance, confirming a dominant-negative mode of action for these mutations. Our genetic and functional data, which is corroborated by the existence of a Tenm4 knockout mouse displaying an ET phenotype, implicates TENM4 in ET. Together with previous studies of TENM4 in model organisms, our studies intimate that processes regulating myelination in the central nervous system and axon guidance might be significant contributors to the genetic burden of this disorder.

The effects of some variables on CO2 laser-MAG hybrid welding

The CO2-laser-MAG hybrid welding process has been shown to be a productive choice for the welding industry, being used in e.g. the shipbuilding, pipe and beam manufacturing, and automotive industries. It provides an opportunity to increase the productivity of welding of joints containing air gaps compared with autogenous laser beam welding, with associated reductions in distortion and marked increases in welding speeds and penetration in comparison with both arc and autogenous laser welding. The literature study indicated that the phenomena of laser hybrid welding are mostly being studied using bead-on-plate welding or zero air gap configurations. This study shows it very clearly that the CO2 laser-MAG hybrid welding process is completely different, when there is a groove with an air gap. As in case of industrial use it is excepted that welding is performed for non-zero grooves, this study is of great importance for industrial applications. The results of this study indicate that by using a 6 kW CO2 laser-MAG hybrid welding process, the welding speed may also be increased if an air gap is present in the joint. Experimental trials indicated that the welding speed may be increased by 30-82% when compared with bead-on-plate welding, or welding of a joint with no air gap i.e. a joint prepared as optimum for autogenous laser welding. This study demonstrates very clearly, that the separation of the different processes, as well as the relative configurations of the processes (arc leading or trailing) affect welding performance significantly. These matters influence the droplet size and therefore the metal transfer mode, which in turn determined the resulting weld quality and the ability to bridge air gaps. Welding in bead-onplate mode, or of an I butt joint containing no air gap joint is facilitated by using a leading torch. This is due to the preheating effect of the arc, which increases the absorptivity of the work piece to the laser beam, enabling greater penetration and the use of higher welding speeds. With an air gap present, air gap bridging is more effectively achieved by using a trailing torch because of the lower arc power needed, the wider arc, and the movement of droplets predominantly towards the joint edges. The experiments showed, that the mode of metal transfer has a marked effect on gap bridgeability. Transfer of a single droplet per arc pulse may not be desirable if an air gap is present, because most of the droplets are directed towards the middle of the joint where no base material is present. In such cases, undercut is observed. Pulsed globular and rotational metal transfer modes enable molten metal to also be transferred to the joint edges, and are therefore superior metal transfer modes when bridging air gaps. It was also found very obvious, that process separation is an important factor in gap bridgeability. If process separation is too large, the resulting weld often exhibits sagging, or no weld may be formed at all as a result of the reduced interaction between the component processes. In contrast, if the processes are too close to one another, the processing region contains excess molten metal that may create difficulties for the keyhole to remain open. When the distance is optimised - i.e. a separation of 0-4 mm in this study, depending on the welding speed and beam-arc configuration - the processes act together, creating beneficial synergistic effects. The optimum process separation when using a trailing torch was found to be shorter (0-2 mm) than when a leading torch is used (2-4 mm); a result of the facilitation of weld pool motion when the latter configuration is adopted. This study demonstrates, that the MAG process used has a strong effect on the CO2-laser-MAG hybrid welding process. The laser beam welding component is relatively stable and easy to manage, with only two principal processing parameters (power and welding speed) needing to be adjusted. In contrast, the MAG process has a large number of processing parameters to optimise, all of which play an important role in the interaction between the laser beam and the arc. The parameters used for traditional MAG welding are often not optimal in achieving the most appropriate mode of metal transfer, and weld quality in laser hybrid welding, and must be optimised if the full range of benefits provided by hybrid welding are to be realised.

Role of Munc18c in SNARE-mediated exocytosis

Background: The SNARE (Soluble N-ethylmaleimide-sensitive factor Attachment protein Receptors) and SM (Sec1/Munc18) family of proteins form the core machinery that drives the fusion of vesicles in different membrane trafficking steps. They are highly conserved, implying a similar mode of binding and function. In vertebrates, Munc18a is essential for neuronal exocytosis. It binds to its partner syntaxin1a (Syx1a) at both its N-peptide and closed conformation, and thereby inhibits SNARE complex formation in vitro. By contrast, its close homolog Munc18c is thought to interact with only the N-peptide of its partner Syx4. Moreover, different effects of Munc18c on SNARE complex formation have been reported, suggesting that the two Munc18/Syx pairs act differently. Objective: The aim of the present study was to investigate whether the mechanism of action of Munc18c indeed deviates from that of Munc18a by using sensitive biochemical and biophysical methods. Results: I found that Munc18c does have a similar binding mode as Munc18a and interacts tightly with Syx4 at both the N-peptide and closed conformation. Moreover, I established, through a novel assay, that Munc18c inhibits SNARE complex assembly, with both the binding sites contributing to inhibition, similar to Munc18a. However, there were several subtle differences between the two Munc18/Syx pairs. Munc18a exerted stronger inhibition than Munc18c. Also their respective Syx partners were found to differ in the rate of binding to SNAP25, suggesting that the equilibrium of their open and closed conformations is different. Moreover, Munc18a was found to interact with Syx 1, 2, 3 but not 4, while Munc18c bound to Syx 2, 4 and 1 but not 3. By comparing the kinetics of interaction of Syx with either Munc18 or SNAP25, I found that the block of SNARE complex assembly by Munc18 is effective on a shorter time scale, but SNAP25 eventually binds to Syx resulting in SNARE complex formation. Nevertheless, these findings do not explain how Syx can escape the tight grip of Munc18, suggesting that other proteins or mechanisms are needed for this step. I also discovered that Munc18 is able to bind on the surface of the SNARE core complex; however, this observation needs to be tested more rigorously. Conclusion: Munc18c was found to be similar to Munc18a in its mode of binding to Syx and inhibition of SNARE complex assembly. However, differences in kinetics and interaction specificities were observed between the different Munc18/Syx pairs. -- Contexte : Les familles des protéines SNARE (Soluble N-ethylmaleimide-sensitive factor At- tachment protein Receptors) et SM (Sec1/Munc18) forment le coeur de la machinerie chargée de la fusion vésiculaire au cours des différentes étapes du trafic intracellulaire. Elles sont très conservées, suggérant un mode d'interaction et des fonctions semblables. Chez les Verté- brés, Munc18a est essentielle à l'exocytose neuronale. Elle se lie à sa partenaire d'interaction syntaxin1a (Syx1a) à la fois via un peptide N-terminal et la conformation fermée de celle-ci, inhibant ainsi la formation du complexe SNARE in vitro. Son homologue proche Munc18c au contraire, est supposée interagir seulement avec le peptide N-terminal de sa partenaire Syx4. En outre, différents effets de Munc18c sur la formation du complexe SNARE ont été décrits, suggérant que les deux paires Munc18/Syx fonctionnent différemment. Objectif : Le but de cette étude est de tester si les mécanismes de fonctionnement de Munc18c diffèrent vraiment de ceux de Munc18a par le biais de méthodes biochimiques et biophysiques très précises. Résultats : J'ai pu démontrer que Munc18c se comporte en effet de façon semblable à Munc18a, et interagit étroitement avec Syx4 à ses deux sites de liaison. J'ai pu de surcroît montrer par une nouvelle méthode que Munc18c inhibe l'assemblage du complexe SNARE en impliquant ces deux sites de liaison, comme le fait Munc18a. il existe cependant de subtiles différences entre les deux paires Munc18/Syx : Munc18a exerce une inhibition plus forte que Munc18c ; leurs Syx partenaires diffèrent également dans leur degré de liaison à SNAP25, ce qui suggère un équilibre different de leurs conformations ouverte et fermée. De plus, Munc18a interagit avec Syx 1, 2 et 3 mais pas Syx 4, alors que Munc18c se lie à Syx 2, 4 et 1 mais pas Syx 3. En comparant les cinétiques d'interaction de Syx avec Munc18 ou SNAP25, j'ai découvert que le blocage par Munc18 de l'assemblage du complexe SNARE est effectif de façon brève, bien que SNAP25 finisse par se lier à Syx et aboutir ainsi à la formation du complexe SNARE. Ces découvertes n'expliquent cependant pas comment Syx parvient à échapper à la solide emprise de Munc18, et suggèrent ainsi l'intervention nécessaire d'autres protéines ou mécanismes à cette étape. J'ai également découvert que Munc18 peut se lier à la surface de la partie centrale du complexe SNARE - cette observation reste à être testée de façon plus stringente. Conclusion : Il a pu être établi que Munc18c est semblable à Munc18a quant à son mode de liaison à Syx et d'inhibition de l'assemblage du complexe SNARE. Des différences de cinétique et de spécificité d'interaction entre les diverses paires Munc18/Syx ont cependant été identifiées.

Seroprevalence of Coxiella burnetii and Brucella abortus among pregnant women.

Coxiella burnetii and Brucella abortus are two intracellular bacteria implicated in zoonotic miscarriage. In the present study, C. burnetii and B. abortus seroprevalence was compared among women from London with and without miscarriage. Coxiella burnetii seroprevalence was high (4.6%, 95% CI 2.8-7.1) despite the rare apparent exposure of this urban population. Only two patients exhibited anti-B. abortus antibodies. As a result of the risk of chronic Q fever with endocarditis and/or hepatitis, the mode of Coxiella burnetii infection in this population merits further investigation.

Offshore Sourcing in Software Development: Case Studies of Finnish-Russian Cooperation

The study examines international cooperation in product development in software development organisations. The software industry is known for its global nature and knowledge-intensity, which makes it an interesting setting to examine international cooperation in. Software development processes are increasingly distributed worldwide, but for small or even medium-sized enterprises, typical for the software industry, such distribution of operations is often possible only in association with crossing the company’s boundaries. The strategic decision-making of companies is likely to be affected by the characteristics of the industry, and this includes decisions about cooperation or sourcing. The objective of this thesis is to provide a holistic view on factors affecting decisions about offshore sourcing in software development. Offshore sourcing refers to a cooperative mode of offshoring, where a firm does not establish its own presence in a foreign country, but utilises a local supplier. The study examines product development activities that are distributed across organisational and geographical boundaries. The objective can be divided into two subtopics: general reasons for international cooperation in product development and particular reasons for cooperation between Finnish and Russian companies. The focus is on the strategic rationale at the company level, in particular in small and medium-sized enterprises. The theoretical discourse of the study builds upon the literature on international cooperation and networking, with particular focus on cooperation with foreign suppliers and within product development activities. The resource-based view is also discussed, as heterogeneity and interdependency of the resources possessed by different firms are seen as factors motivating international cooperation. Strategically, sourcing can be used to access resources possessed by an industrial network, to enhance the product development of a firm, or to optimise its cost structure. In order to investigate the issues raised by the theoretical review, two empirical studies on international cooperation in software product development have been conducted. The emphasis of the empirical part of the study is on cooperation between Finnish and Russian companies. The data has been gathered through four case studies on Finnish software development organisations and four case studies on Russian offshore suppliers. Based on the material from the case studies, a framework clarifying and grouping the factors that influence offshore sourcing decisions has been built. The findings indicate that decisions regarding offshore sourcing in software development are far more complex than generally assumed. The framework provides a holistic view on factors affecting decisions about offshore sourcing in software development, capturing the multidimensionality of motives for entering offshore cooperation. Four groups of factors emerged from the data: A) strategy-related aspects, B) aspects related to resources and capabilities, C) organisation-related aspects, and D) aspects related to the entrepreneur or management. By developing a holistic framework of decision factors, the research offers in-depth theoreticalunderstanding of offshore sourcing rationale in product development. From the managerial point of view, the proposed framework sums up the issues that a firm should pay attention to when contemplating product development cooperation with foreign suppliers. Understanding different components of sourcing decisions can lead to improved preconditions for strategising and engaging in offshore cooperation. A thorough decisionmaking process should consider all the possible benefits and risks of product development cooperation carefully.