Modelagem estocástica do índice de radiação ultravioleta na costa leste do nordeste do Brasil

The increase in ultraviolet radiation (UV) at surface, the high incidence of non-melanoma skin cancer (NMSC) in coast of Northeast of Brazil (NEB) and reduction of total ozone were the motivation for the present study. The overall objective was to identify and understand the variability of UV or Index Ultraviolet Radiation (UV Index) in the capitals of the east coast of the NEB and adjust stochastic models to time series of UV index aiming make predictions (interpolations) and forecasts / projections (extrapolations) followed by trend analysis. The methodology consisted of applying multivariate analysis (principal component analysis and cluster analysis), Predictive Mean Matching method for filling gaps in the data, autoregressive distributed lag (ADL) and Mann-Kendal. The modeling via the ADL consisted of parameter estimation, diagnostics, residuals analysis and evaluation of the quality of the predictions and forecasts via mean squared error and Pearson correlation coefficient. The research results indicated that the annual variability of UV in the capital of Rio Grande do Norte (Natal) has a feature in the months of September and October that consisting of a stabilization / reduction of UV index because of the greater annual concentration total ozone. The increased amount of aerosol during this period contributes in lesser intensity for this event. The increased amount of aerosol during this period contributes in lesser intensity for this event. The application of cluster analysis on the east coast of the NEB showed that this event also occurs in the capitals of Paraiba (João Pessoa) and Pernambuco (Recife). Extreme events of UV in NEB were analyzed from the city of Natal and were associated with absence of cloud cover and levels below the annual average of total ozone and did not occurring in the entire region because of the uneven spatial distribution of these variables. The ADL (4, 1) model, adjusted with data of the UV index and total ozone to period 2001-2012 made a the projection / extrapolation for the next 30 years (2013-2043) indicating in end of that period an increase to the UV index of one unit (approximately), case total ozone maintain the downward trend observed in study period

Estado nutricional antropométrico, perfil lipídico e consumo alimentar como fatores de risco para doença cardiovascular em adolescentes

The dyslipidemia and excess weight in adolescents, when combined, suggest a progression of risk factors for cardiovascular disease (CVD). Besides these, the dietary habits and lifestyle have also been considered unsuitable impacting the development of chronic diseases. The study objectives were: (1) estimate the prevalence of lipid profile and correlate with body mass index (BMI), waist circumference (WC) and waist / height ratio (WHR) in adolescents, considering the maturation sexual, (2) know the sources of variance in the diet and the number of days needed to estimate the usual diet of adolescents and (3) describe the dietary patterns and lifestyle of adolescents, family history of CVD and age correlates them with the patterns of risk for CVD, adjusted for sexual maturation. A cross-sectional study was performed with 432 adolescents, aged 10-19 years from public schools of the Natal city, Brazil. The dyslipidemias were evaluated considering the lipid profile, the index of I Castelli (TC / HDL) and II (LDL / HDL) and non-HDL cholesterol. Anthropometric indicators were BMI, WC and WHR. The intake of energy, nutrients including fiber, fatty acids and cholesterol was estimated from two 24-hour recalls (24HR). The variables of lipid profile, anthropometric and clinical data were used in the models of Pearson correlation and linear regression, considering the sexual maturation. The variance ratio of the diet was calculated from the component-person variance, determined by analysis of variance (ANOVA). The definition of the number of days to estimate the usual intake of each nutrient was obtained by taking the hypothetical correlation (r) ≥ 0.9, between nutrient intake and the true observed. We used the principal component analysis as a method of extracting factors that 129 accounted for the dependent variables and known cardiovascular risk obtained from the lipid profile, the index for Castelli I and II, non-HDL cholesterol, BMI, and WC the WHR. Dietary patterns and lifestyle were obtained from the independent variables, based on nutrients consumed and physical activity weekly. In the study of principal component analysis (PCA) was investigated associations between the patterns of cardiovascular risk factors in dietary patterns and lifestyle, age and positive family history of CVD, through bivariate and multiple logistic regression adjusted for sexual maturation. The low HDL-C dyslipidemia was most prevalent (50.5%) for adolescents. Significant correlations were observed between hypercholesterolemia and positive family history of CVD (r = 0.19, p <0.01) and hypertriglyceridemia with BMI (r = 0.30, p <0.01), with the CC (r = 0.32, p <0.01) and WHR (r = 0.33, p <0.01). The linear model constructed with sexual maturation, age and BMI explained about 1 to 10.4% of the variation in the lipid profile. The sources of variance between individuals were greater for all nutrients in both sexes. The reasons for variances were  1 for all nutrients were higher in females. The results suggest that to assess the diet of adolescents with greater precision, 2 days would be enough to R24h consumption of energy, carbohydrates, fiber, saturated and monounsaturated fatty acids. In contrast, 3 days would be recommended for protein, lipid, polyunsaturated fatty acids and cholesterol. Two cardiovascular risk factors as have been extracted in the ACP, referring to the dependent variables: the standard lipid profile (HDL-C and non-HDL cholesterol) and "standard anthropometric index (BMI, WC, WHR) with a power explaining 75% of the variance of the original data. The factors are representative of two independent variables led to dietary patterns, "pattern 130 western diet" and "pattern protein diet", and one on the lifestyle, "pattern energy balance". Together, these patterns provide an explanation power of 67%. Made adjustment for sexual maturation in males remained significant variables: the associations between puberty and be pattern anthropometric indicator (OR = 3.32, CI 1.34 to 8.17%), and between family history of CVD and the pattern lipid profile (OR = 2.62, CI 1.20 to 5.72%). In females adolescents, associations were identified between age after the first stage of puberty with anthropometric pattern (OR = 3.59, CI 1.58 to 8.17%) and lipid profile (OR = 0.33, CI 0.15 to 0.75%). Conclusions: The low HDL-C was the most prevalent dyslipidemia independent of sex and nutritional status of adolescents. Hypercholesterolemia was influenced by family history of CVD and sexual maturation, in turn, hypertriglyceridemia was closely associated with anthropometric indicators. The variance between the diets was greater for all nutrients. This fact reflected in a variance ratio less than 1 and consequently in a lower number of days requerid to estimate the usual diet of adolescents considering gender. The two dietary patterns were extracted and the pattern considered unhealthy lifestyle as healthy. The associations were found between the patterns of CVD risk with age and family history of CVD in the studied adolescents

Multivariate analysis of fresh-cut carambola slices stored under different temperatures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fractal dimension and anisotropy of soil CO2 emission in a mechanically harvested sugarcane production area

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ingredient classification according to the digestible amino acid profile: an exploratory analysis

This study aimed: 1) to classify ingredients according to the digestible amino acid (AA) profile; 2) to determine ingredients with AA profile closer to the ideal for broiler chickens; and 3) to compare digestible AA profiles from simulated diets with the ideal protein profile. The digestible AA levels of 30 ingredients were compiled from the literature and presented as percentages of lysine according to the ideal protein concept. Cluster and principal component analyses (exploratory analyses) were used to compose and describe groups of ingredients according to AA profiles. Four ingredient groups were identified by cluster analysis, and the classification of the ingredients within each of these groups was obtained from a principal component analysis, showing 11 classes of ingredients with similar digestible AA profiles. The ingredients with AA profiles closer to the ideal protein were meat and bone meal 45, fish meal 60 and wheat germ meal, all of them constituting Class 1; the ingredients from the other classes gradually diverged from the ideal protein. Soybean meal, which is the main protein source for poultry, showed good AA balance since it was included in Class 3. on the contrary, corn, which is the main energy source in poultry diets, was classified in Class 8. Dietary AA profiles were improved when corn and/or soybean meal were partially or totally replaced in the simulations by ingredients with better AA balance.

Magnetic susceptibility to identify landscape segments on a detailed scale in the region of Jaboticabal, São Paulo, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Discrimination of geomorphic surfaces with multivariate analysis of soil attributes in sandstone - basalt lithosequence

O conceito de superfície geomórfica permite uma interligação entre os diferentes ramos da ciência do solo, tais como geologia, geomorfologia e pedologia. Esta associação favorece a compreensão da distribuição espacial dos solos na paisagem, e torna possível compreender o comportamento dos atributos do solo, que estão principalmente relacionadas com a estratigrafia e formas do relevo. Assim, este estudo visa à aplicação da estatística multivariada para categorizar superfícies geomórficas em uma litossequência arenito-basalto, de modo a fornecer uma base para a avaliação do solo em áreas afins. A área de estudo está localizada no município de Pereira Barreto, São Paulo, Brasil. A área escolhida possui 530 hectares, onde foram localizadas e mapeadas três superfícies geomórficas (I, II e III). Na área, 134 amostras foram coletadas nas profundidades de 0,0-0,2 m e 0,8-1,0 m, foram determinados os conteúdos de areia, silte e argila, pH em CaCl2, conteúdo de MO, P, Ca, Mg, K, Al e H+Al. Com base nos resultados, foram realizadas a análise univariada e multivariada de variância, clusters e principal componente, a fim de comparar as três superfícies geomórficas. A análise estatística univariada dos atributos do solo não foi eficiente na identificação das três superfícies geomórficas. Utilizando-se os atributos físicos e químicos do solo, as técnicas estatísticas multivariada permitiram à separação dos três grupos de corpos naturais do solo que foram equivalentes as três superfícies geomórficas mapeadas. Estes resultados são interessantes, pois demonstram a viabilidade da utilização de classificação numérica das superfícies geomórficas para ajudar no mapeamento de solo.

Análise multivariada e variabilidade espacial na estimativa da erodibilidade de um argissolo vermelho-amarelo

A erodibilidade é um fator de extrema importância na caracterização da perda de solo, representando os processos que regulam a infiltração de água e sua resistência à desagregação e o transporte de partículas. Assim, por meio da análise de dependência espacial dos componentes principais da erodibilidade (fator K), objetivou-se estimar a erodibilidade do solo em uma área de nascentes da microbacia do Córrego do Tijuco, Monte Alto-SP, e analisar a variabilidade espacial das variáveis granulométricas do solo ao longo do relevo. A erodibilidade média da área foi considerada alta, e a análise de agrupamento k-means apontou para uma formação de cinco grupos: no primeiro, os altos teores de areia grossa (AG) e média (AM) condicionaram sua distribuição nas áreas planas; o segundo, caracterizado pelo alto teor de areia fina (AF), distribui-se nos declives mais convexos; o terceiro, com altos teores de silte e areia muito fina (AMF), concentrou-se nos maiores declives e concavidades; o quarto, com maior teor de argila, seguiu as zonas de escoamento de água; e o quinto, com alto teor de matéria orgânica (MO) e areia grossa (AG), distribui-se nas proximidades da zona urbana. A análise de componentes principais (ACP) mostrou quatro componentes com 87,4 % das informações, sendo o primeiro componente principal (CP1) discriminado pelo transporte seletivo de partículas principalmente em zonas pontuais de maior declividade e acúmulo de sedimentos; o segundo (CP2), discriminado pela baixa coesão entre as partículas, mostra acúmulo da areia fina nas áreas de menor cota em toda a área de concentração de água; o terceiro (CP3), discriminado pela maior agregação do solo, concentra-se principalmente nas bases de grandes declives; e o quarto (CP4), discriminado pela areia muito fina, distribui-se ao longo das declividades nas maiores altitudes. Os resultados sugerem o comportamento granulométrico do solo, que se mostra suscetível ao processo erosivo devido às condições texturais superficiais e à movimentação do relevo.

Avaliação de características de desempenho e de carcaça de codornas de corte por meio da análise de componentes principais

Foram utilizados dados de 288 codornas de corte (Coturnix coturnix coturnix) para avaliar a possibilidade de resumir a informação contida no complexo de variáveis originais, eliminando-se variáveis inexpressivas por meio da técnica de componentes principais. Foram registrados o peso vivo (PVIVO) e pesos do peito (PPEITO), das coxas (PCOXA), da gordura abdominal (GA), das vísceras comestíveis (fígado, moela e coração) (FIG, MOELA e CORA) e da carcaça eviscerada (PCEVIS). As carcaças foram secas e trituradas para a avaliação do teor matéria seca (MS), gordura (GORD) e proteína bruta (PB). Dos 11 componentes principais, sete (63,6%) apresentaram variância menor que 0,7 (autovalor inferior a 0,7), sendo sugeridas para descarte, respectivamente, em ordem de menor importância, para explicar a variação total das seguintes variáveis: PCEVIS, PPEITO, PCOXA, CORA, FIG MOELA e GORD. Com base nos resultados, recomenda-se manter as seguintes variáveis em experimentos futuros: PVIVO, MS, PB e GA.

Compressão auto-adaptativa de imagens coloridas

Image compress consists in represent by small amount of data, without loss a visual quality. Data compression is important when large images are used, for example satellite image. Full color digital images typically use 24 bits to specify the color of each pixel of the Images with 8 bits for each of the primary components, red, green and blue (RGB). Compress an image with three or more bands (multispectral) is fundamental to reduce the transmission time, process time and record time. Because many applications need images, that compression image data is important: medical image, satellite image, sensor etc. In this work a new compression color images method is proposed. This method is based in measure of information of each band. This technique is called by Self-Adaptive Compression (S.A.C.) and each band of image is compressed with a different threshold, for preserve information with better result. SAC do a large compression in large redundancy bands, that is, lower information and soft compression to bands with bigger amount of information. Two image transforms are used in this technique: Discrete Cosine Transform (DCT) and Principal Component Analysis (PCA). Primary step is convert data to new bands without relationship, with PCA. Later Apply DCT in each band. Data Loss is doing when a threshold discarding any coefficients. This threshold is calculated with two elements: PCA result and a parameter user. Parameters user define a compression tax. The system produce three different thresholds, one to each band of image, that is proportional of amount information. For image reconstruction is realized DCT and PCA inverse. SAC was compared with JPEG (Joint Photographic Experts Group) standard and YIQ compression and better results are obtain, in MSE (Mean Square Root). Tests shown that SAC has better quality in hard compressions. With two advantages: (a) like is adaptive is sensible to image type, that is, presents good results to divers images kinds (synthetic, landscapes, people etc., and, (b) it need only one parameters user, that is, just letter human intervention is required

Caracterização de água produzida na indústria de petróleo para fins de descarte e otimização do processo de separação óleo/água

The oil industry has several segments that can impact the environment. Among these, produced water which has been highlight in the environmental problem because of the great volume generated and its toxic composition. Those waters are the major source of waste in the oil industry. The composition of the produced water is strongly dependent on the production field. A good example is the wastewater produced on a Petrobras operating unit of Rio Grande do Norte and Ceará (UO-RNCE). A single effluent treatment station (ETS) of this unit receives effluent from 48 wells (onshore and offshore), which leads a large fluctuations in the water quality that can become a complicating factor for future treatment processes. The present work aims to realize a diagnosis of a sample of produced water from the OU - RNCE in compliance to certain physical and physico-chemical parameters (chloride concentration, conductivity, dissolved oxygen, pH, TOG (oil & grease), nitrate concentration, turbidity, salinity and temperature). The analysis of the effluent is accomplished by means of a MP TROLL 9500 Multiparameter probe, a TOG/TPH Infracal from Wilks Enterprise Corp. - Model HATR - T (TOG) and a MD-31 condutivimeter of Digimed. Results were analyzed by univariated and multivariated analysis (principal component analysis) associated statistical control charts. The multivariate analysis showed a negative correlation between dissolved oxygen and turbidity (-0.55) and positive correlations between salinity and chloride (1), conductivity, chloride and salinity (0.70). Multivariated analysis showed there are seven principal components which can explain the variability of the parameters. The variables, salinity, conductivity and chloride were the most important variables, with, higher sampling variance. Statistical control charts have helped to establish a general trend between the physical and chemical evaluated parameters

Fabrication, structural characterization, and applications of Langmuir and Langmuir-Blodgett films of a poly(azo)urethane

The synthesis of a poly(azo)urethane by fixing CO2 in bis-epoxide followed by a polymerization reaction with an azodiamine is presented. Since isocyanate is not used in the process, it is termed clean method and the polymers obtained are named NIPUs (non-isocyanate polyurethanes). Langmuir films were formed at the air-water interface and were characterized by surface pressure vs mean molecular area per met unit (Pi-A) isotherms. The Langmuir monolayers were further studied by running stability tests and cycles of compression/expansion (possible hysteresis) and by varying the compression speed of the monolayer formation, the subphase temperature, and the solvents used to prepare the spreading polymer solutions. The Langmuir-Blodgett (LB) technique was used to fabricate ultrathin films of a particular polymer (PAzoU). It is possible to grow homogeneous LB films of up to 15 layers as monitored using UV-vis absorption spectroscopy. Higher number of layers can be deposited when PAzoU is mixed with stearic acid, producing mixed LB films. Fourier transform infrared (FTIR) absorption spectroscopy and Raman scattering showed that the materials do not interact chemically in the mixed LB films. The atomic force microscopy (AFM) and micro-Raman technique (optical microscopy coupled to Raman spectrograph) revealed that mixed LB films present a phase separation distinguishable at micrometer or nanometer scale. Finally, mixed and neat LB films were successfully characterized using impedance spectroscopy at different temperatures, a property that may lead to future application as temperature sensors. Principal component analysis (PCA) was used to correlate the data.

A theoretical analysis on the intramolecular proton transfer of alpha-alanine in an aqueous medium

Intramolecular proton transfer from oxygen to nitrogen atoms in the alpha-alanine amino acid has been studied by ab initio methods at the HF/6-31G*, HF/6-31 ++ G** and MP2/6-31 ++ G** levels of calculation including the solvent effects by means of self-consistent reaction field theory. An analysis of the results based on the natural bond orbital charges shows that the transition structure presents an imbalance in the sense that the charge shift lags behind the proton transfer and that the bond formation is always in advance with respect to the bond cleavage. All calculation levels show that the barrier height associated with the conformational change on alpha-alanine is larger than the proton transfer process. (C) 1998 Elsevier B.V. B.V. All rights reserved.

Spin and pseudospin symmetries in the Dirac equation with central Coulomb potentials

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ferramentas quimiométricas aplicadas a classificação de amostras de leite em pó e quantificação de proteínas

In this work we used chemometric tools to classify and quantify the protein content in samples of milk powder. We applied the NIR diffuse reflectance spectroscopy combined with multivariate techniques. First, we carried out an exploratory method of samples by principal component analysis (PCA), then the classification of independent modeling of class analogy (SIMCA). Thus it became possible to classify the samples that were grouped by similarities in their composition. Finally, the techniques of partial least squares regression (PLS) and principal components regression (PCR) allowed the quantification of protein content in samples of milk powder, compared with the Kjeldahl reference method. A total of 53 samples of milk powder sold in the metropolitan areas of Natal, Salvador and Rio de Janeiro were acquired for analysis, in which after pre-treatment data, there were four models, which were employed for classification and quantification of samples. The methods employed after being assessed and validated showed good performance, good accuracy and reliability of the results, showing that the NIR technique can be a non invasive technique, since it produces no waste and saves time in analyzing the samples