944 resultados para maturity stages
Resumo:
O conhecimento das fases de absorção de água das diferentes espécies é importante em pesquisas objetivando melhorar a qualidade das sementes, utilizando tratamentos como condicionamento osmótico, pré-hidratação e uso de bioreguladores. O objetivo do presente trabalho foi estabelecer uma metodologia para determinar o limite entre a primeira e a segunda fase do processo, considerando o modelo W = f(t) - (a - w0)exp(-kt), utilizando testes estatísticos. O limite entre as duas primeiras fases do processo de absorção de água pelas sementes, foi determinado utilizando-se a distribuição assintótica de uma função de estimadores. O ponto a partir do qual esta diferença (W*) deixa de ser significativa foi determinado utilizando-se o teste estatístico T de Student. Para os dados utilizados como exemplo, tem-se o modelo ou =(0,434 + 0,00162 t) - (0,434 - w o)exp(-0,121 t), com r² = 0,98 e W* = (0,434 - w o) exp(-0,121 t). O valor de t encontrado (27,2 horas) é menor do que o valor determinado, considerando-se como critério para mudança de fase a diferença de 1% entre a assíntota e o valor estimado pelo modelo ajustado. Essa diferença de duas horas corresponde a 0,28% de água absorvida.
Resumo:
De forma geral, as características do amido variam não somente com a planta de origem, mas também com o estádio de desenvolvimento desta. Neste trabalho objetivou-se avaliar a influência da época de plantio e estádio de desenvolvimento da planta de ahipa sobre as características físico-químicas das raízes, tamanho de grânulos do amido e suas propriedades viscográficas. Constatou-se influência do estádio de desenvolvimento da planta nas características físico-químicas das raízes e do amido, independentemente da época de plantio. A melhor época para o plantio de Pachyrhizus ahipa é outubro e a colheita deve ser feita no máximo com 9 meses, adotando-se o procedimento de retirada das flores a partir dos 3 meses.
Resumo:
Neste trabalho quantificaram-se as principais alterações histológicas ocorridas em cultivares de capim-elefante (Pennisetumpurpureum Schumach.), em três estádios de desenvolvimento. A degradação dos tecidos foi avaliada após incubação em líquido ruminal de bovinos. As porcentagens de tecidos presentes em colmo, quilha, limbo e bainha foliares foram determinadas. A quilha e o colmo apresentaram maior proporção de tecido lignificado, enquanto o limbo foliar, maior quantidade de tecido epidérmico e tecido vascular não-lignificado. O tecido parenquimático foi encontrado em menor proporção na bainha foliar, principalmente pela presença do aerênquima, a partir da segunda coleta. A proporção de tecido lignificado aumentou com a maturidade do vegetal, sendo mais acentuado em colmos e limbos. Entre as principais alterações, destaca-se a grande área de degradação encontrada na bainha foliar, mesmo com o envelhecimento dos tecidos. Isto foi associado à presença do aerênquima encontrado nos estádios de desenvolvimento mais avançados. Os estômatos favoreceram a penetração dos microorganismos nos tecidos mais internos da folha (mesofilo). O espessamento e a lignificação da parede celular ocorreram com o envelhecimento das plantas, acompanhado de redução na área de degradação dos tecidos.
Resumo:
In order to know which stage of fruit development is better for acerola industrialization, we studied the PME specific activity, pectin content and vitamin C at various stages of development. The acerola fruits were classified according to colour and weight in five stages: immature green (2.62-3.21 g), green (4.04-4.83 g), mature green/yellow (5.03-5.88 g), pale-red (6.16-6.77 g) and ripe mature (6.92-8.37 g). The results showed that the highest content of pectin and vitamin C occurred at the immature green stage, 4.51 +/- 0.1% yield, 2424 mg/100 g of pulp and decreased as fruit ripened, 2.99 +/- 0.03% yield, 957 +/- 0.0 mg/100 g of pulp, respectively. However, at the same stages, the values of PME specific activity were lowest, 0.61 +/- 0.01 and 0.55 +/- 0.0 units g(-1)/g of pulp, respectively. The highest value of PME activity was 2.08 +/- 0.01 units g(-1)/g of pulp in the green stage. (C) 2001 Elsevier B.V. Ltd. All rights reserved.
Resumo:
Elephant-grass is known as a great feed to dairy and beef cattle at tropical regions. Its agricultural aspects have been very observed. However, its botanical, mainly anatomical characteristics, are few studied. The objective of this work was to investigate the anatomical changes occurred in leaves (leaf blades and sheaths) of three elephant-grass cultivars (Pennisetum purpureum Schum. cultivar Roxo, EMPASC 307 Testo and EMPASC 309 Areia) at three stages of physiological maturity (4, 8 and 16 weeks after sprouting). In general, the three cultivars presented similar anatomy. A unique feature, the presence of aerenchyma was found in the leaf sheath of all three cultivars, at the second harvest (a weeks).
Resumo:
Neuston samples collected from the Charleston Bump region off the coast of South Carolina, U.S.A., during the summers of 2002 and 2003 consistently included a decapod species of undetermined identity with a large brachyuran megalopa. Despite their resemblance to some calappids, it was impossible to make a definitive identification based solely on general morphology. Therefore, additional neuston tows were taken on the continental shelf near Charleston, during the summer of 2004 to obtain these living megalopae. These were raised successfully through five juvenile stages at the Southeastern Regional Taxonomic Center (SERTC) laboratory. The morphology of the juveniles provided evidence that they are megalopae of Calappa tortugae Rathbun, 1933. Comparisons with megalopae of Hepatus epheliticus (Linnaeus, 1763), H. pudibundus (Herbst, 1785), Calappa flammea (Herbst, 1794) and Cryptosoma balguerii (Desbonne, 1867) are presented here. This is the first complete description of the megalopa morphology of a member of the genus Calappa Weber, 1795 from the Western Atlantic, and it is helpful for taxonomic, systematic and ecological purposes.
Resumo:
Methods of assessment of compost maturity are needed so the application of composted materials to lands will provide optimal benefits. The aim of the present paper is to assess the maturity reached by composts from domestic solid wastes (DSW) prepared under periodic and permanent aeration systems and sampled at different composting time, by means of excitation-emission matrix (EEM) fluorescence spectroscopy and Fourier transform infrared spectroscopy (FT-IR). EEM spectra indicated the presence of two different fluorophores centered, respectively, at Ex/Em wavelength pairs of 330/425 and 280/330 nm. The fluorescence intensities of these peaks were also analyzed, showing trends related to the maturity of composts. The contour density of EEM maps appeared to be strongly reduced with composting days. After 30 and 45 days of composting, FT-IR spectra exhibited a decrease of intensity of peaks assigned to polysaccharides and in the aliphatic region. EEM and FT-IR techniques seem to produce spectra that correlate with the degree of maturity of the compost. Further refinement of these techniques should provide a relatively rapid method of assessing the suitability of the compost to land application.
Resumo:
A total of 222 dogs were examined by blood smear examination and Hepatozoon canis infection was detected in 13 dogs (5.9%). Five H. canis-infected dogs were necropsied to observe tissue stages in the organs. Fragments of spleen, liver, lungs, heart, kidneys, lymph nodes, bone marrow and skeletal muscles were used to made touch-impression smears. No macroscopic lesions were found in the organs. Two dogs had gamonts within polymorphonuclear cells and schizonts in various stages of development within the spleen and the bone marrow. Nevertheless, no mature meronts were found.
Resumo:
The surface corrosion process associated with the hydrolysis of fluorozirconate glass, ZBLAN (53ZrF(4), 20BaF(2), 20NaF, 4LaF(2), 3AlF(3)) was investigated using X-ray photoelectron spectroscopy (XPS), grazing-incidence small angle X-ray scattering (GISAXS), X-ray reflectivity (XRR) and scanning electron microscopy (SEM). After a short exposure period (25 min) of the glass surface to deionized water the XPS data indicate an increase of the oxygen content accompanied by a decrease of fluorine concentration. The analysis of the chemical bonding structure identified the predominant surface reaction products as zirconium hydroxyfluoride and oxyfluoride species. The second most abundant glass component, bariumfluoride, remains almost unaffected by oxygen, while sodium fluoride is completely removed from the attacked surface region. The detected structural and compositional changes are related to the selective dissolution of the glass components leading to the formation of a new surface phase. This process is accompanied by a visible surface roughening caused by reprecipitated species, observed by SEM. The modification of the glass surface is responsible for an increase of the GISAXS intensity. The scattering was attributed to nanovoids formed at the surface region of the glass with an average size of 2.4 +/- 0.05 nm. (C) 2004 Elsevier B.V. All rights reserved.
Resumo:
The objective of this study was to evaluate the influence of maturity on the production, stalk/leaf/ear relationship, chemical composition, and quality of corn silage (Zen mays, L.). Four harvests were made from the early milk (23.49% DM) to the semi-hard dough stage. (30.70%DM). After these evaluations, the corn was ensiled in 200 liter metal drums. After six months of storage, the quality of the silages was determined. The corn dry matter production was higher at the dough and semi-hard dough stages (9866 and 9896 t/ha, respectively) than in the early milk stage (7460 t/ha). The ears with the maturity showed a increase in dry matter (20.93 to 43.51%), acid detergent fiber decrease (32.46 to 18.62%), and maintainance of the crude protein content (average = 8.27%). The stalks and leaves decreased from 33.31 to 27.18% and from 34.17 to 23.66%, respectively, while the ears increased from 32.52 to 49.16% from the early milk to the semi-hard dough stages. All experimental silages attained good quality, independent of corn development stages. The corn can be ensiled from the early milk and soft dough stages without a decrease in silage quality, but the restricting factor under those conditions was a lower dry matter content (24.35 and 28.65%, respectively).