Social determinants and health effects of low and high severity intimate partner violence

PURPOSE: We sought to analyze whether the sociodemographic profile of battered women varies according to the level of severity of intimate partner violence (IPV), and to identify possible associations between IPV and different health problems taking into account the severity of these acts. METHODS: A cross-sectional study of 8,974 women (18-70 years) attending primary healthcare centers in Spain (2006-2007) was performed. A compound index was calculated based on frequency, types (physical, psychological, or both), and duration of IPV. Descriptive and multivariate procedures using logistic regression models were fitted. RESULTS: Women affected by low severity IPV and those affected by high severity IPV were found to have a similar sociodemographic profile. However, divorced women (odds ratio [OR], 8.1; 95% confidence interval [CI], 3.2-20.3), those without tangible support (OR, 6.6; 95% CI, 3.3-13.2), and retired women (OR, 2.7; 95% CI, 1.2-6.0) were more likely to report high severity IPV. Women experiencing high severity IPV were also more likely to suffer from poor health than were those who experienced low severity IPV. CONCLUSIONS: The distribution of low and high severity IPV seems to be influenced by the social characteristics of the women involved and may be an important indicator for estimating health effects. This evidence may contribute to the design of more effective interventions.

Measuring color differences in automotive samples with lightness flop: a test of the AUDI2000 color-difference formula

From a set of gonioapparent automotive samples from different manufacturers we selected 28 low-chroma color pairs with relatively small color differences predominantly in lightness. These color pairs were visually assessed with a gray scale at six different viewing angles by a panel of 10 observers. Using the Standardized Residual Sum of Squares (STRESS) index, the results of our visual experiment were tested against predictions made by 12 modern color-difference formulas. From a weighted STRESS index accounting for the uncertainty in visual assessments, the best prediction of our whole experiment was achieved using AUDI2000, CAM02-SCD, CAM02-UCS and OSA-GP-Euclidean color-difference formulas, which were no statistically significant different among them. A two-step optimization of the original AUDI2000 color-difference formula resulted in a modified AUDI2000 formula which performed both, significantly better than the original formula and below the experimental inter-observer variability. Nevertheless the proposal of a new revised AUDI2000 color-difference formula requires additional experimental data.

Solubility, Density, Refractive Index, and Viscosity for the Polyhydric Alcohol + CsBr + H2O Ternary Systems at Different Temperatures

The solubility, density, refractive index, and viscosity data for the ethylene glycol + CsBr + H2O, 1,2-propanediol + CsBr + H2O, and glycerin + CsBr + H2O ternary systems have been determined at (288.15, 298.15, and 308.15) K. In all cases, the solubility of CsBr in aqueous solutions was decreased significantly due to the presence of polyhydric alcohol. The liquid–solid equilibrium experimental data were correlated using the NRTL (nonrandom two-liquid) activity coefficient model, considering nondissociation of the dissolved salt in the liquid phase, and new interaction parameters were estimated. The mean deviations between calculated and experimental compositions were low, showing the good descriptive quality and applicability of the NRTL model. The refractive indices, densities, and viscosities for the unsaturated solutions of the three ternary systems have also been measured at three temperatures. Values for all of the properties were correlated with the salt concentrations and proportions of polyhydric alcohol in the solutions.

Smoothed bootstrap Malmquist index based on DEA model to compute productivity of tax offices

This paper analyses the productivity growth of the SUMA tax offices located in Spain evolved between 2004 and 2006 by using Malmquist Index based on Data Envelopment Analysis (DEA) models. It goes a step forward by smoothed bootstrap procedure which improves the quality of the results by generalising the samples, so that the conclusions obtained from them can be applied in order to increase productivity levels. Additionally, the productivity effect is divided into two different components, efficiency and technological change, with the objective of helping to clarify the role played by either the managers or the level of technology in the final performance figures.

Comparison of the predictability of refractive cylinder correction by laser in situ keratomileusis in eyes with low or high ocular residual astigmatism

Purpose: To compare the manifest refractive cylinder (MRC) predictability of myopic astigmatism laser in situ keratomileusis (LASIK) between eyes with low and high ocular residual astigmatism (ORA). Setting: London Vision Clinic, London, United Kingdom. Design: Retrospective case study. Methods: The ORA was considered the vector difference between the MRC and the corneal astigmatism. The index of success (IoS), difference vector ÷ MRC, was analyzed for different groups as follows: stage 1, low ORA (ORA ÷ MRC <1), high ORA (ORA ÷ MRC ≥1); stage 2, low ORA group reduced to match the high ORA group for MRC; stage 3, grouped by ORA magnitude with low ORA (<0.50 diopters [D]), mid ORA (0.50 to 1.24 D), and high ORA (≥1.25 D); stage 4, high ORA group subdivided into low (<0.75 D) and high (≥0.75 D) corneal astigmatism. Results: For stage 1, the mean preoperative MRC and mean IoS were −1.32 D ± 0.65 (SD) (range −0.55 to −3.77 D) and 0.27, respectively, for low ORA and −0.79 ± 0.20 D (range −0.56 to −2.05 D) and 0.37, respectively, for high ORA. For stage 2, the mean IoS increased to 0.32 for low ORA. For stage 3, the mean IoS was 0.28, 0.29, and 0.31 for low ORA, mid ORA, and high ORA, respectively. For stage 4, the mean IoS was 0.20 for high ORA/low corneal astigmatism and 0.35 for high ORA/high corneal astigmatism. Conclusions: The MRC predictability was slightly worse in eyes with high ORA when grouped by the ORA ÷ MRC. Matching for the MRC and grouping by ORA magnitude resulted in similar predictability; however, eyes with high ORA and high corneal astigmatism were less predictable.

Reforming the Market Design of EU Electricity Markets: Addressing the Challenges of a Low-Carbon Power Sector. CEPS Task Force Report, 27 July 2015

This CEPS Task Force Report focuses on whether there is a need to adapt the EU’s electricity market design and if so, the options for doing so. In a first step, it analyses the current market trends by distinguishing between their causes and their consequences. Then, the current blueprint of EU power market design – the target model – is briefly introduced, followed by a discussion of the shortcomings of the current approach and the challenges in finding suitable solutions. The final chapter offers an inventory of solutions differentiating between recommendations shared among Task Force members and non-consensual options.

Corrected index properties for ODP Leg 127 and 128 sites

During Legs 127 and 128, we found a systematic error in the index property measurements, in that the wet bulk density, grain density, and porosity did not satisfy well-established interrelationships. We have found that an almost constant difference exists between the weight of water lost during drying and the volume of water lost. This discrepancy is independent of volume or water content of the sample. The water losses should be equal because the density of water is close to 1.0 g/cm**3. The pycnometer wet volume measurement has been identified as the source of the systematic error. The wet volume on average is 0.2 cm**3 too low. For the rare cases when the water content is negligible, there is no offset. The source of the wet volume error results from the partial vapor pressure of water in the pycnometer cell. Newly corrected tables of index properties measured during Legs 127 and 128 are included. The corrected index properties are internally consistent. The data are in better agreement with theoretical models that relate the index properties to other physical properties, such as thermal conductivity and acoustic velocity. In future, a standard volume sampler should be used, or the wet volume should be calculated from the dry volume and the water loss by weight.

Section 3 : job training, employment, and contracting opportunities for low-income persons.

Includes index.

A guide to reducing radiation exposure to as low as reasonably achievable (ALARA) /

"DOE/EV/1830-T5."

Bibliography of low energy electron and photon cross section data (through December 1974) /

Includes index.

An annotated bibliography of the low temperature relations of plants /

Arranged alphabetically by author, with subject index.

DS, GS, and depot maintenance manual : tractor, full tracked, low speed, diesel engine, medium drawbar pull, oscillating tract, 74-in. minimum gage, power shift transmission w/bulldozer, hydraulic tilting w/back rip scarifier, w/winch reversible, rear, 1 drum (Allis-Chalmers model HD16M) FSN 2410-078-6483 w/ripper, hydraulic (Allis-Chalmers model HD16M) FSN 2410-078-6484.

Includes index.

Direct support and general support maintenance manual : tractor, full tracked, low speed, DED medium drawbar pull, oscillating track, 78-in. gage (Caterpillar model D7F), FSN 2410-177-7283 w/ripper, FSN 2410-177-7284 w/winch.

Includes index.

Organizational maintenance manual : tractor, full-tracked, low speed, DED, medium drawbar pull, oscillating track, 78-in. gage, (Caterpillar model D7F) with ripper, FSN 2410-177-7283 with winch, FSN 2410-177-7284.

Includes index.

An abridgement of Gerard Brandt's History of the Reformation in the Low-Countries : containing all that is curious in that most valuable work.

Includes index.