Analytical and numerical solutions for the time and space-symmetric fractional diffusion equation

We consider a time and space-symmetric fractional diffusion equation (TSS-FDE) under homogeneous Dirichlet conditions and homogeneous Neumann conditions. The TSS-FDE is obtained from the standard diffusion equation by replacing the first-order time derivative by a Caputo fractional derivative, and the second order space derivative by a symmetric fractional derivative. First, a method of separating variables expresses the analytical solution of the TSS-FDE in terms of the Mittag--Leffler function. Second, we propose two numerical methods to approximate the Caputo time fractional derivative: the finite difference method; and the Laplace transform method. The symmetric space fractional derivative is approximated using the matrix transform method. Finally, numerical results demonstrate the effectiveness of the numerical methods and to confirm the theoretical claims.

Service learning in teacher education

If the student wellbeing pedagogy characterised by the troika metaphor is to become more widely adopted, beginning teachers need to be inducted into service learning. In this chapter, we discuss the implementation and outcomes of a service learning program in a Bachelor of Education course in Australia. The program provides pre-service teachers with insights into service learning practice. Pre-service teachers are given supported opportunities to examine and challenge traditional beliefs and values about student diversity and the role of schools in developing a more inclusive society. They are supported in developing ethics of care and concern for inclusive and equitable practices – characteristics necessary for quality teaching. Thus, the Queensland University of Technology (QUT) service learning program is an ideal example of the troika effect in practice, in that the pedagogy fuses values education, quality teaching and service learning to develop within each student an inclusive ethical framework that will inform their classroom practice as beginning quality teachers.

Embedding 'philosophy in the classroom' in pre-service teacher education

The holistic conception of the troika, as described in the first chapter, centres on the relationship between the implicit and explicit teaching of values the nurturing of the specific dimensions of quality teaching and the opportunity to ‘walk the talk’ of the values education program through aspects such as practical citizenship (Lovat, Toomey, Clement, Crotty & Nielsen, 2009). It is proposed in this chapter that the conception can be realized through the embedding of Philosophy in the Classroom within pre-service teaching programs. The troika, a Russian sleigh with three horses, only function well when there is complete synergy and balance between all Classroom is a scaffold for ensuring that all three elements of the troika, namely, quality teaching, values education and service learning in the form of education for citizenship, exist within the classroom to achieve an optimal learning, growth and wellbeing for all students. For this to be more widely accomplished Philosophy in the Classroom and discusses how it constitutes a successful synergy and balance of the troika for effective teaching. It then proposes how it might be embedded into pre-service teacher education.

Dynamic coast control of train movement with genetic algorithm

The railway service is now the major transportation means in most of the countries around the world. With the increasing population and expanding commercial and industrial activities, a high quality of railway service is the most desirable. Train service usually varies with the population activities throughout a day and train coordination and service regulation are then expected to meet the daily passengers' demand. Dwell time control at stations and fixed coasting point in an inter-station run are the current practices to regulate train service in most metro railway systems. However, a flexible and efficient train control and operation is not always possible. To minimize energy consumption of train operation and make certain compromises on the train schedule, coast control is an economical approach to balance run-time and energy consumption in railway operation if time is not an important issue, particularly at off-peak hours. The capability to identify the starting point for coasting according to the current traffic conditions provides the necessary flexibility for train operation. This paper presents an application of genetic algorithms (GA) to search for the appropriate coasting point(s) and investigates the possible improvement on fitness of genes. Single and multiple coasting point control with simple GA are developed to attain the solutions and their corresponding train movement is examined. Further, a hierarchical genetic algorithm (HGA) is introduced here to identify the number of coasting points required according to the traffic conditions, and Minimum-Allele-Reserve-Keeper (MARK) is adopted as a genetic operator to achieve fitter solutions.

Petri net modeling of spatial and temporal constraints in track allocation problem at railway stations

The track allocation problem (TAP) at a multi-track, multi-platform mainline railway station is defined by the station track layout and service timetable, which implies combinations of spatial and temporal conflicts. Feasible solutions are available from either traditional planning or advanced intelligent searching methods and their evaluations with respect to operational requirements are essential for the operators. To facilitate thorough analysis, a timed Coloured Petri Nets (CPN) model is presented here to encapsulate the inter-relationships of the spatial and temporal constraints in the TAP.

Co-creation in business service lifecycle management

Co-creation between customers and providers has recently gained more attention by business service providers as a promising endeavour. The different perspectives of co-creation - innovation, sourcing and marketing - are well deployed. From a provider’s point of view, the question of how to manage business services with respect to co-creation is vitally important. However, service engineering and service lifecycle management typically take a mostly internal, closed-loop approach, although a logical implication of acknowledging the value co-creation perspective on “service” would be to leverage customer and other stakeholder competences to the full extent. This paper aims at reconciling the perspectives of co-creation and makes a contribution by analysing where and how co-creation can be effectively utilised throughout the various stages of a generic business service lifecycle. The result will be a framework guiding companies in using co-creation when managing their business services.

Longitudinal modelling of the influence of individual differences and the workplace on well-being and work engagement

A set of non-nested longitudinal models tested the relationships between personal and workplace resources, well-being and work engagement. The reciprocal model, trimmed of trivial paths had the best fit and parsimony. The model showed the strong influences of concurrent functioning, stability of variables over time and weaker reciprocal relationships between variables across time. Individuals with greater confidence in themselves and the future experience better work conditions and have greater well-being and work engagement. These day-to-day influences are equalled by the long term strength and stability of Individual Factors, Positive Workplace Factors, and Overall Well-Being. Whilst the reciprocal paths had only weak to mild effects, there was mutual reinforcement of Individual Factors and Overall Well-Being, with Positive Workplace Factors and Work Engagement counterbalancing each other, indicating a more complex relationship. Well-being, particularly, is anchored in the immediate and distant past and provides a robust stability to functioning into the future.

Remediation strategies of shaft and common mode voltages in adjustable speed drive systems

AC motors are largely used in a wide range of modern systems, from household appliances to automated industry applications such as: ventilations systems, fans, pumps, conveyors and machine tool drives. Inverters are widely used in industrial and commercial applications due to the growing need for speed control in ASD systems. Fast switching transients and the common mode voltage, in interaction with parasitic capacitive couplings, may cause many unwanted problems in the ASD applications. These include shaft voltage and leakage currents. One of the inherent characteristics of Pulse Width Modulation (PWM) techniques is the generation of the common mode voltage, which is defined as the voltage between the electrical neutral of the inverter output and the ground. Shaft voltage can cause bearing currents when it exceeds the amount of breakdown voltage level of the thin lubricant film between the inner and outer rings of the bearing. This phenomenon is the main reason for early bearing failures. A rapid development in power switches technology has lead to a drastic decrement of switching rise and fall times. Because there is considerable capacitance between the stator windings and the frame, there can be a significant capacitive current (ground current escaping to earth through stray capacitors inside a motor) if the common mode voltage has high frequency components. This current leads to noises and Electromagnetic Interferences (EMI) issues in motor drive systems. These problems have been dealt with using a variety of methods which have been reported in the literature. However, cost and maintenance issues have prevented these methods from being widely accepted. Extra cost or rating of the inverter switches is usually the price to pay for such approaches. Thus, the determination of cost-effective techniques for shaft and common mode voltage reduction in ASD systems, with the focus on the first step of the design process, is the targeted scope of this thesis. An introduction to this research – including a description of the research problem, the literature review and an account of the research progress linking the research papers – is presented in Chapter 1. Electrical power generation from renewable energy sources, such as wind energy systems, has become a crucial issue because of environmental problems and a predicted future shortage of traditional energy sources. Thus, Chapter 2 focuses on the shaft voltage analysis of stator-fed induction generators (IG) and Doubly Fed Induction Generators DFIGs in wind turbine applications. This shaft voltage analysis includes: topologies, high frequency modelling, calculation and mitigation techniques. A back-to-back AC-DC-AC converter is investigated in terms of shaft voltage generation in a DFIG. Different topologies of LC filter placement are analysed in an effort to eliminate the shaft voltage. Different capacitive couplings exist in the motor/generator structure and any change in design parameters affects the capacitive couplings. Thus, an appropriate design for AC motors should lead to the smallest possible shaft voltage. Calculation of the shaft voltage based on different capacitive couplings, and an investigation of the effects of different design parameters are discussed in Chapter 3. This is achieved through 2-D and 3-D finite element simulation and experimental analysis. End-winding parameters of the motor are also effective factors in the calculation of the shaft voltage and have not been taken into account in previous reported studies. Calculation of the end-winding capacitances is rather complex because of the diversity of end winding shapes and the complexity of their geometry. A comprehensive analysis of these capacitances has been carried out with 3-D finite element simulations and experimental studies to determine their effective design parameters. These are documented in Chapter 4. Results of this analysis show that, by choosing appropriate design parameters, it is possible to decrease the shaft voltage and resultant bearing current in the primary stage of generator/motor design without using any additional active and passive filter-based techniques. The common mode voltage is defined by a switching pattern and, by using the appropriate pattern; the common mode voltage level can be controlled. Therefore, any PWM pattern which eliminates or minimizes the common mode voltage will be an effective shaft voltage reduction technique. Thus, common mode voltage reduction of a three-phase AC motor supplied with a single-phase diode rectifier is the focus of Chapter 5. The proposed strategy is mainly based on proper utilization of the zero vectors. Multilevel inverters are also used in ASD systems which have more voltage levels and switching states, and can provide more possibilities to reduce common mode voltage. A description of common mode voltage of multilevel inverters is investigated in Chapter 6. Chapter 7 investigates the elimination techniques of the shaft voltage in a DFIG based on the methods presented in the literature by the use of simulation results. However, it could be shown that every solution to reduce the shaft voltage in DFIG systems has its own characteristics, and these have to be taken into account in determining the most effective strategy. Calculation of the capacitive coupling and electric fields between the outer and inner races and the balls at different motor speeds in symmetrical and asymmetrical shaft and balls positions is discussed in Chapter 8. The analysis is carried out using finite element simulations to determine the conditions which will increase the probability of high rates of bearing failure due to current discharges through the balls and races.

Citizen consultation from above and below : the Australian perspective

Citizen engagement and e‐government initiatives in Australia remain somewhat underdeveloped, not least for a number of fundamental structural reasons. Fledgling initiatives can be divided into a number of broad categories, including top‐down government consultation through blogs and similar experimental online sites operated by government departments; bottom‐up NGO‐driven watchdog initiatives such as GetUp!’s Project Democracy site, modelled on projects established in the UK; and a variety of more or less successful attempts by politicians (and their media handlers) to utilise social networking tools to connect with constituents while bypassing the mainstream media. This chapter explores these initiatives, and discusses the varying levels of success which they have found to date.

The international search for ethics norms : which consumer behaviors do consumers consider (un)acceptable?

Purpose: Businesses cannot rely on their customers to always do the right thing. To help researchers and service providers better understand the dark (and light) side of customer behavior, this study aims to aggregate and investigate perceptions of consumer ethics from young consumers on five continents. The study seeks to present a profile of consumer behavioral norms, how ethical inclinations have evolved over time, and country differences. ---------- Design/methodology/approach: Data were collected from ten countries across five continents between 1997 and 2007. A self-administered questionnaire containing 14 consumer scenarios asked respondents to rate acceptability of questionable consumer actions. ---------- Findings: Overall, consumers found four of the 14 questionable consumer actions acceptable. Illegal activities were mostly viewed as unethical, while some legal actions that were against company policy were viewed less harshly. Differences across continents emerged, with Europeans being the least critical, while Asians and Africans shared duties as most critical of consumer actions. Over time, consumers have become less tolerant of questionable behaviors. ---------- Practical implications: Service providers should use the findings of this study to better understand the service customer. Knowing what customers in general believe is ethical or unethical can help service designers focus on the aspects of the technology or design most vulnerable to customer deviance. ---------- Multinationals already know they must adapt their business practices to the market in which they are operating, but they must also adapt their expectations as to the behavior of the corresponding consumer base. Originality/value: This investigation into consumer ethics helps businesses understand what their customer base believes is the right thing in their role as customer. This is a large-scale study of consumer ethics including 3,739 respondents on five continents offering an evolving view of the ethical inclinations of young consumers.

Nursing and Midwifery Services Strategic Directions, 2011-2015

This document presents the newly updated strategic directions for strengthening nursing and midwifery services (SDNM) for the period 2011–2015. Complementing and building on the 2002–2008 SDNM, it seeks to provide policymakers, practitioners and other stakeholders at every level with a flexible framework for broad-based, collaborative action to enhance the capacity of nurses and midwives to contribute to: * universal coverage * people-centred health care * policies affecting their practice and working conditions, and the * scaling up of national health systems to meet global goals and targets. The SDNM for 2011–2015 draws on several key World Health Assembly resolutions, and are underpinned by the associated global policy recommendations and codes of practice. (1,2) After two years of extensive research and consultation, a SDNM task force was developed, and a consensus on a range of specific activities revolving around 13 objectives in five interrelated key results areas (KRAs), was achieved: n health system and service strengthening n policy and practice * education, training and career development * workforce management and * partnership. Stakeholders, although free to prioritize certain parts of the framework to meet their own particular needs, are encouraged to adhere to the cornerstone of collaborative action, namely the common goal enshrined in the core SDNM 2011–2015 vision statement: improved health outcomes for individuals, families and communities through the provision of competent, culturally sensitive, evidence-based nursing and midwifery services.

Decoupled trajectory planning for a submerged rigid body subject to dissipative and potential forces

This paper studies the practical but challenging problem of motion planning for a deeply submerged rigid body. Here, we formulate the dynamic equations of motion of a submerged rigid body under the architecture of differential geometric mechanics and include external dissipative and potential forces. The mechanical system is represented as a forced affine-connection control system on the configuration space SE(3). Solutions to the motion planning problem are computed by concatenating and reparameterizing the integral curves of decoupling vector fields. We provide an extension to this inverse kinematic method to compensate for external potential forces caused by buoyancy and gravity. We present a mission scenario and implement the theoretically computed control strategy onto a test-bed autonomous underwater vehicle. This scenario emphasizes the use of this motion planning technique in the under-actuated situation; the vehicle loses direct control on one or more degrees of freedom. We include experimental results to illustrate our technique and validate our method.

Construction safety in the repair and maintenance sector

Statistics indicate that the percentage of fatal industrial accidents arising from repair, maintenance, minor alteration and addition (RMAA) works in Hong Kong was disturbingly high and was over 56% in 2006. This paper provides an initial report of a research project funded by the Research Grants Council (RGC) of the HKSAR to address this safety issue. The aim of this study is to scrutinize the causal relationship between safety climate and safety performance in the RMAA sector. It aims to evaluate the safety climate in the RMAA sector; examine its impacts on safety performance, and recommend measures to improve safety performance in the RMAA sector. This paper firstly reports on the statistics of construction accidents arising from RMAA works. Qualitative and quantitative research methods applied in conducting the research are dis-cussed. The study will critically review these related problems and provide recommendations for improving safety performance in the RMAA sector.

A construction safety competency framework : development, industry application, and future benefits

View from the Construction sector as to the need to improve OHS culture What were the goals and the outcomes of the CRC Construction Innovation research Leadership behaviours to drive OHS culture change in industry What benefits to the construction sector have occurred through these initiatives What we have learnt on the journey

Strategy content analysis for service identification : a case study on government agencies

In a resource constrained business world, strategic choices must be made on process improvement and service delivery. There are calls for more agile forms of enterprises and much effort is being directed at moving organizations from a complex landscape of disparate application systems to that of an integrated and flexible enterprise accessing complex systems landscapes through service oriented architecture (SOA). This paper describes the analysis of strategies to detect supporting business services. These services can then be delivered in a variety of ways: web-services, new application services or outsourced services. The focus of this paper is on strategy analysis to identify those strategies that are common to lines of business and thus can be supported through shared services. A case study of a state government is used to show the analytical method and the detection of shared strategies.