902 resultados para indoor surveillance
Resumo:
Demand for good indoor air quality is increasing as people recorgnise the risks to their health and productivity from indoor pollutants. There is a tendency to reduce ventilation rates to ensure energy conservation in buildings; in this instance schools. However, evidence reviewed shows that this can be detrimental to health and wellbeing in schools because of the learner density within a small area (1.8 - 2.4m2/person); eventually indicating that carbon dioxide (CO2) levels can rise to very high levels in classroom occupancy periods. A preliminary study to investigate the impact of indoor environmental parameters has been performed in a secondary school classroom in Pretoria, South Africa. Factors monitored include temperature, relative humidity, lighting, air velocities and CO2 concentrations. From the results low air velocities are recorded (i.e. 0.1-0.3m/s) impacting on the retention of CO2 build-up in the classroom. Results presented in this paper are the initial findings of ongoing research.
Resumo:
The aim of this study was to estimate the indoor and outdoor concentrations of fungal spores in the Metropolitan Area of Sao Paulo (MASP), collected at different sites in winter/spring and summer seasons. The techniques adopted included cultivation (samples collected with impactors) and microscopic enumeration (samples collected with impingers). The overall results showed total concentrations of fungal spores as high as 36,000 per cubic meter, with a large proportion of non culturable spores (around 91% of the total). Penicillium sp. and Aspergillus sp. were the dominant species both indoors and outdoors, in all seasons tested, occurring in more than 30% of homes at very high concentrations of culturable airborne fungi [colony forming units(CFU) m(-3)]. There was no significant difference between indoor and outdoor concentrations. The total fungal spore concentration found in winter was 19% higher than that in summer. Heat and humidity were the main factors affecting fungal growth; however, a non-linear response to these factors was found. Thus, temperatures below 16A degrees C and above 25A degrees C caused a reduction in the concentration (CFU m(-3)) of airborne fungi, which fits with MASP climatalogy. The same pattern was observed for humidity, although not as clearly as with temperature given the usual high relative humidity (above 70%) in the study area. These results are relevant for public health interventions that aim to reduce respiratory morbidity among susceptible populations.
Resumo:
We estimated the sensitivity, i.e., the proportion of all cases of adverse events following immunization (AEFIs) reported to the Brazilian passive surveillance for adverse events following immunization (PSAEFI) with the diphtheria-tetanus-whole-cell pertussis-Haemophilus influenzae type b (DTwP/Hib) vaccine, as well as investigating factors associated with AEFIs reporting. During 2003-2004, 8303 AEFIs associated with DTwP-Hib were reported; hypotonic-hyporesponsive episodes (HHEs), fever and convulsions being the most common. Cure without sequel was achieved in 98.4% of the cases. The mean sensitivity of the PSAEFI was 22.3% and 31.6%, respectively, for HHE and convulsions, varying widely among states. Reporting rates correlated positively with the Human Development Index and coverage of adequate prenatal care, correlating negatively with infant mortality rates. Quality of life indicators and the degree of organization of health services are associated with greater PSAEFI sensitivity. In addition to consistently describing the principal AEFIs, PSAEFI showed the DTwP/Hib vaccine to be safe and allayed public fears related to its use. (C) 2010 Elsevier Ltd. All rights reserved.
Resumo:
Background. Rotavirus is a major cause of gastroenteritis in children. Knowledge of rotavirus genotypes is important for vaccination strategies. Methods. During 2005-2006, rotavirus surveillance studies were conducted in Sao Paulo, Salvador, Goiania, and Porto Alegre, Brazil. Stool samples were collected from children <5 years of age who had diarrhea and were screened by the Rotaclone Enzyme Immunoassay for the presence of rotavirus. Confirmed rotavirus-positive samples were characterized for P and G genotypes by reverse-transcriptase polymerase chain reaction. Results. A total of 510 stool samples were collected. Of these, 221 (43.3%) were positive for rotavirus. Overall, G9 was the predominant G type, followed by G2, and G1; P[4] and P[8] were the predominant P types. The most frequent G/P genotype combination detected was G2P[4], followed by G9P[8], G9P[4], and G1P[8]. G2P[4] was the predominant type in Goiania and Salvador; G9P[8] and G1P[8] were predominant in Sao Paulo and Porto Alegre, respectively. Conclusions. The prevalence, seasonality, and genotype distribution of rotavirus infection varied in different regions in Brazil. With immunization programs, continuous monitoring of rotavirus types is important to detect novel and emerging strains.
Resumo:
Background: Brazil implemented routine immunization with the human rotavirus vaccine, Rotarix, in 2006 and vaccination coverage reached 81% in 2008 in Sao Paulo. Our aim was to assess the impact of immunization on the incidence of severe rotavirus acute gastroenteritis (AGE). Methods: We performed a 5-year (2004-2008) prospective surveillance at a sentinel hospital in Sao Paulo, with routine testing for rotavirus in all children less than 5 years of age hospitalized with AGE. Genotypes of positive samples were determined by reverse transcription polymerase chain reaction. Results: During the study, 655 children hospitalized with AGE were enrolled; of whom 169 (25.8%) were positive for rotavirus. In the post-vaccine period, a 59% reduction in the number of hospitalizations of rotavirus AGE and a 42.2% (95% confidence interval [CI], 18.6%-59.0%; P = 0.001) reduction in the proportion of rotavirus-positive results among children younger than 5 years were observed, with the greatest decline among infants (69.2%; 95% CI, 24.7%-87.4%; P = 0.004). Furthermore, the number of all-cause hospitalizations for AGE was reduced by 29% among children aged <5 years. The onset and peak incidences of rotavirus AGE occurred 3 months later in the 2007 and 2008 seasons compared with previous years. Genotype G2 accounted for 15%, 70%, and 100% of all cases identified, respectively, in 2006, 2007, and 2008. Conclusions: After vaccine implementation, a marked decline in rotavirus AGE hospitalizations was demonstrated among children younger than 5 years of age, with the greatest reduction in the age groups targeted for vaccination. The predominance of genotype G2P[4] highlights the need of continued postlicensure surveillance studies.
Resumo:
This research was carried out by studying possible renovation of a two-storey detached multifamily building by using passive solar design options in a cold climate in Borlänge, Sweden where the heating Degree Days are 4451 (base 20°C). Borlänge`s housing company, Tunabyggen, plans to renovate the project house located inthe multicultural district, Jakobsgårdarna. The goal of the thesis was to suggest a redesign of the current building, decrease the heating energy use, by applying passive solar design and control strategies, in a most reasonable way. In addition ensure a better thermal comfort for the tenants in the dwellings. Literatures have been studied, from which can be inferred that passive design should be abasic design consideration for all housing constructions, because it has advantages to ensure thermal comfort, and reduce the energy use. In addition further savings can be achieved applying different types of control strategies, from which the house will be more personalized, and better adapted to the user’s needs.The proposed method is based on simulations by using TRNSYS software. First a proper building model was set up, which represents the current state of the project building. Then the thermal insulation and the windows were upgraded, based on today's building regulations. The developments of the passive solar options were accomplished in two steps. First of all the relevant basic passive design elements were considered, then those advantages were compared to the advantages of applying new conventional thermostat, and shading control strategies.The results show that there is significant potential with the different types of passive solar design; their usage depends primarily on the location of the site as well as the orientation of the project building. Applying the control strategies, such as thermostat, and shading control, along the thermal insulation upgrade, may lead to significant energy savings (around 40 %), by comparison to the reference building without any upgrade.
Resumo:
Background. Surveillance is a central activity among mental health nursing, but it is also questioned for its therapeutic value and considered to be custodial. Aim. The aim of this study was to describe how mental health nurses use different approaches to observe patients in relation to the practice of surveillance in psychiatric nursing care. Methods. In this study, Spradley's twelve-step ethnographic method was used. Results. Mental health nurses use their cultural knowing to observe patients in psychiatric care in various ways. Two dichotomous approaches were identified: the latent and the manifest approach. Discussion. Different strategies and techniques for observing patients are structured along two dichotomies. The underlying relationships between these two different dichotomous positions transform the act of observing into surveillance. This is further developed in a theoretical model called the powerful scheme of observation and surveillance (PSOS).
Resumo:
Alison Macrina is the founder and director of the Library Freedom Project, an initiative that aims to make real the promise of intellectual freedom in libraries. The Library Freedom Project trains librarians on the state of global surveillance, privacy rights, and privacy-protecting technology, so that librarians may in turn teach their communities about safeguarding privacy. In 2015, Alison was named one of Library Journal‘s Movers and Shakers. Read more about the Library Freedom Project at libraryfreedomproject.org.
Resumo:
In the past few years, libraries have started to design public programs that educate patrons about different tools and techniques to protect personal privacy. But do end user solutions provide adequate safeguards against surveillance by corporate and government actors? What does a comprehensive plan for privacy entail in order that libraries live up to their privacy values? In this paper, the authors discuss the complexity of surveillance architecture that the library institution might confront when seeking to defend the privacy rights of patrons. This architecture consists of three main parts: physical or material aspects, logical characteristics, and social factors of information and communication flows in the library setting. For each category, the authors will present short case studies that are culled from practitioner experience, research, and public discourse. The case studies probe the challenges faced by the library—not only when making hardware and software choices, but also choices related to staffing and program design. The paper shows that privacy choices intersect not only with free speech and chilling effects, but also with questions that concern intellectual property, organizational development, civic engagement, technological innovation, public infrastructure, and more. The paper ends with discussion of what libraries will require in order to sustain and improve efforts to serve as stewards of privacy in the 21st century.
Resumo:
In the last years the number of industrial applications for Augmented Reality (AR) and Virtual Reality (VR) environments has significantly increased. Optical tracking systems are an important component of AR/VR environments. In this work, a low cost optical tracking system with adequate attributes for professional use is proposed. The system works in infrared spectral region to reduce optical noise. A highspeed camera, equipped with daylight blocking filter and infrared flash strobes, transfers uncompressed grayscale images to a regular PC, where image pre-processing software and the PTrack tracking algorithm recognize a set of retro-reflective markers and extract its 3D position and orientation. Included in this work is a comprehensive research on image pre-processing and tracking algorithms. A testbed was built to perform accuracy and precision tests. Results show that the system reaches accuracy and precision levels slightly worse than but still comparable to professional systems. Due to its modularity, the system can be expanded by using several one-camera tracking modules linked by a sensor fusion algorithm, in order to obtain a larger working range. A setup with two modules was built and tested, resulting in performance similar to the stand-alone configuration.
Resumo:
In this thesis, a frequency selective surface (FSS) consists of a two-dimensional periodic structure mounted on a dielectric substrate, which is capable of selecting signals in one or more frequency bands of interest. In search of better performance, more compact dimensions, low cost manufacturing, among other characteristics, these periodic structures have been continually optimized over time. Due to its spectral characteristics, which are similar to band-stop or band-pass filters, the FSSs have been studied and used in several applications for more than four decades. The design of an FSS with a periodic structure composed by pre-fractal elements facilitates the tuning of these spatial filters and the adjustment of its electromagnetic parameters, enabling a compact design which generally has a stable frequency response and superior performance relative to its euclidean counterpart. The unique properties of geometric fractals have shown to be useful, mainly in the production of antennas and frequency selective surfaces, enabling innovative solutions and commercial applications in microwave range. In recent applications, the FSSs modify the indoor propagation environments (emerging concept called wireless building ). In this context, the use of pre-fractal elements has also shown promising results, allowing a more effective filtering of more than one frequency band with a single-layer structure. This thesis approaches the design of FSSs using pre-fractal elements based on Vicsek, Peano and teragons geometries, which act as band-stop spatial filters. The transmission properties of the periodic surfaces are analyzed to design compact and efficient devices with stable frequency responses, applicable to microwave frequency range and suitable for use in indoor communications. The results are discussed in terms of the electromagnetic effect resulting from the variation of parameters such as: fractal iteration number (or fractal level), scale factor, fractal dimension and periodicity of FSS, according the pre-fractal element applied on the surface. The analysis of the fractal dimension s influence on the resonant properties of a FSS is a new contribution in relation to researches about microwave devices that use fractal geometry. Due to its own characteristics and the geometric shape of the Peano pre-fractal elements, the reconfiguration possibility of these structures is also investigated and discussed. This thesis also approaches, the construction of efficient selective filters with new configurations of teragons pre-fractal patches, proposed to control the WLAN coverage in indoor environments by rejecting the signals in the bands of 2.4~2.5 GHz (IEEE 802.11 b) and 5.0~6.0 GHz (IEEE 802.11a). The FSSs are initially analyzed through simulations performed by commercial software s: Ansoft DesignerTM and HFSSTM. The fractal design methodology is validated by experimental characterization of the built prototypes, using alternatively, different measurement setups, with commercial horn antennas and microstrip monopoles fabricated for low cost measurements
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)