Program for increasing resident's physical activity at the women's home

Obesity and overweight has reached epidemic proportions in the United States, and the prevalence of overweight and obesity among residents of The Women's Home residents is high. This culminating experience is the result of my practicum at The Women's Home located in Houston, TX. The Women's Home is a rehabilitation center for victims of sexual assault, drug abuse, family violence, or a combination. A needs assessment including focus groups and a literature review was conducted to design a a physical activity intervention for the residents. Results from focus group data showed the resident's average BMI was 32, which is termed clinically obese by American standards. The focus groups determined a strong interest (92%) in engaging in more physical activity to combat their weight problem. As well, they expressed interest in using pedometers as a mechanism to increase physical activity. This planned program, “Every Step Counts”, uses reactivity to pedometers in conjunction with goal setting and increased awareness to increasing steps each day. “Every Step Counts” was developed with support and input from stakeholders, with theoretical constructs and previous evidence based studies. Included in this report are recommendations for implementation, program materials, scope and sequence of program activities, and methods for periodic evaluation.^

Using intervention mapping to develop a community garden program at the women's home

This culminating experience was a practice based intervention conducted by an organization, utilizing an intervention mapping approach for the program planning. It took place summer 2010 through spring 2011 and included incorporating a community garden into the Gusto wellness program at The Women's Home. This organization offers long-term residential care, and therapeutic services. Literature relating to community gardens and nutrition behavior change was reviewed. Short-term objectives included: 1) Conducting a needs assessment using focus groups, 2) Designing gardening program components based on intervention mapping guidelines, 3) Constructing a garden bed at Midtown Community Garden for use of The Women's Home, 4) Planning and implementing gardening education, and 5) Assessing feasibility of the garden program. The target population included 24 residents living at the residential dormitory of The Women's Home at the time of this project. The major variables are intervention mapping constructs including: 1) Needs assessment, 2) Preparing matrices of change objectives, 3) Selecting theory-informed intervention methods and practical strategies, 4) Producing program components and materials, 5) Planning program adoption, implementation, and sustainability, and 6) Planning for evaluation. The specific focus was lack of access to fresh fruits and vegetables (FV) for this population. Focus group responses revealed interest in community garden participation. Matrices of change were developed for lack of FV access based on performance objectives for behavioral and environmental factors and related determinants and theory. Methods and strategies were developed to implement a community garden and encourage participation. Program components included initiating a garden club, networking activities, creating gardening curriculum, and participating at Midtown Community Garden. Adoption and implementation performance objectives were outlined, and many were carried out. Evaluation questions were designed and outcomes of the garden project were discussed. ^ Outcomes of the project included exposure of garden topics and activities for The Women's Home residents, focus group responses revealing an interest in gardening among this population, gardening program components designed based on intervention mapping steps, and a constructed garden bed that was used for planting vegetables and flowers through fall 2010. Limited resources and budget along with a lack of a residential coordinator at The Women's Home were the main limiting factors for this project. Future garden projects can be developed using the intervention mapping process.^

Patient-centered medical home technology effects on hypertension and diabetes control

Background: Hypertension and Diabetes is a public health and economic concern in the United States. The utilization of medical home concepts increases the receipt of preventive services, however, do they also increase adherence to treatments? This study examined the effect of patient-centered medical home technologies such as the electronic health record, clinical support system, and web-based care management in improving health outcomes related to hypertension and diabetes. Methods: A systematic review of the literature used a best evidence synthesis approach to address the general question " Do patient-centered medical home technologies have an effect of diabetes and hypertension treatment?" This was followed by an evaluation of specific examples of the technologies utilized such as computer-assisted recommendations and web-based care management provided by the patient's electronic health record. Ebsco host, Ovid host, and Google Scholar were the databases used to conduct the literature search. Results: The initial search identified over 25 studies based on content and quality that implemented technology interventions to improve communication between provider and patient. After further assessing the articles for risk of bias and study design, 13 randomized controlled studies were chosen. All of the studies chosen were conducted in various primary care settings in both private practices and hospitals between the years 2000 and 2007. The sample sizes of the studies ranged from 42 to 2924 participants. The mean age for all of the studies ranged from 56 to 71 years. The percent women in the studies ranged from one to 78 percent. Over one-third of the studies did not provide the racial composition of the participants. For the seven studies that did provide information about the ethnic composition, 64% of the intervention participants were White. All of the studies utilized some type of web-based or computer-based communication to manage hypertension or diabetes care. Findings on outcomes were mixed, with nine out of 13 studies showing no significant effect on outcomes examined, and four of the studies showing significant and positive impact on health outcomes related to hypertension or diabetes Conclusion: Although the technologies improved patient and provider satisfaction, the outcomes measures such as blood pressure control and glucose control were inconclusive. Further research is needed with diverse ethnic and SES population to investigate the role of patient-centered technologies on hypertension and diabetes control. Also, further research is needed to investigate the effects of innovative medical home technologies that can be used by both patients and providers to increase quality of communication concerning adherence to treatments.^

Is FTA/EPA effective for a developing country to attract FDI? : simulation analysis based on an extended knowledge-capital model

To prepare an answer to the question of how a developing country can attract FDI, this paper explored the factors and policies that may help bring FDI into a developing country by utilizing an extended version of the knowledge-capital model. With a special focus on the effects of FTAs/EPAs between market countries and developing countries, simulations with the model revealed the following: (1) Although FTA/EPA generally ends to increase FDI to a developing country, the possibility of improving welfare through increased demand for skilled and unskilled labor becomes higher as the size of the country declines; (2) Because the additional implementation of cost-saving policies to reduce firm-type/trade-link specific fixed costs ends to depreciate the price of skilled labor by saving its input, a developing country, which is extremely scarce in skilled labor, is better off avoiding the additional option; (3) If a country hopes to enjoy larger welfare gains with EPA, efforts to increase skilled labor in the country, such as investing in education, may be beneficial.

A New Multidisciplinary Home Care Telemedicine System to Monitor Stable Chronic Human Immunodeficiency Virus-Infected Patients: A Randomized Study

BACKGROUND: Antiretroviral therapy has changed the natural history of human immunodeficiency virus (HIV) infection in developed countries, where it has become a chronic disease. This clinical scenario requires a new approach to simplify follow-up appointments and facilitate access to healthcare professionals. METHODOLOGY: We developed a new internet-based home care model covering the entire management of chronic HIV-infected patients. This was called Virtual Hospital. We report the results of a prospective randomised study performed over two years, comparing standard care received by HIV-infected patients with Virtual Hospital care. HIV-infected patients with access to a computer and broadband were randomised to be monitored either through Virtual Hospital (Arm I) or through standard care at the day hospital (Arm II). After one year of follow up, patients switched their care to the other arm. Virtual Hospital offered four main services: Virtual Consultations, Telepharmacy, Virtual Library and Virtual Community. A technical and clinical evaluation of Virtual Hospital was carried out. FINDINGS: Of the 83 randomised patients, 42 were monitored during the first year through Virtual Hospital (Arm I) and 41 through standard care (Arm II). Baseline characteristics of patients were similar in the two arms. The level of technical satisfaction with the virtual system was high: 85% of patients considered that Virtual Hospital improved their access to clinical data and they felt comfortable with the videoconference system. Neither clinical parameters [level of CD4+ T lymphocytes, proportion of patients with an undetectable level of viral load (p = 0.21) and compliance levels >90% (p = 0.58)] nor the evaluation of quality of life or psychological questionnaires changed significantly between the two types of care. CONCLUSIONS: Virtual Hospital is a feasible and safe tool for the multidisciplinary home care of chronic HIV patients. Telemedicine should be considered as an appropriate support service for the management of chronic HIV infection. TRIAL REGISTRATION: Clinical-Trials.gov: NCT01117675.

Solution-processed organic devices developed by a novel cost-effective patterning technique based on electrical erosion

Application of arc erosion to the patterning of metallic contacts in organic devices is presented. A home-made systems and details of the working principles are described. Advantages and drawbacks of this novel technology are discussed.

High-Definition Video Distribution in 802.11g Home Wireless Networks

Multimedia distribution through wireless networks in the home environment presents a number of advantages which have fueled the interest of industry in recent years, such as simple connectivity and data delivery to a variety of devices. Together with High-Definition (HD) contents, multimedia wireless networks have been proposed for several applications, such as IPTV and Digital TV distribution for multiple devices in the home environment. For these scenarios, we propose a multicast distribution system for High-Definition video over 802.11 wireless networks based on rate-limited packet retransmission. We develop a limited rate ARQ system that retransmits packets according to the importance of their content (prioritization scheme) and according to their delay limitations (delay control). The performance of our proposed ARQ system is evaluated and compared with a similarly rate-limited ARQ algorithm. The results show a higher packet recovery rate and improvements in video quality for our proposed system.

Data Processing Modeling in Decision Support Systems.

Due to the advancement of both, information technology in general, and databases in particular; data storage devices are becoming cheaper and data processing speed is increasing. As result of this, organizations tend to store large volumes of data holding great potential information. Decision Support Systems, DSS try to use the stored data to obtain valuable information for organizations. In this paper, we use both data models and use cases to represent the functionality of data processing in DSS following Software Engineering processes. We propose a methodology to develop DSS in the Analysis phase, respective of data processing modeling. We have used, as a starting point, a data model adapted to the semantics involved in multidimensional databases or data warehouses, DW. Also, we have taken an algorithm that provides us with all the possible ways to automatically cross check multidimensional model data. Using the aforementioned, we propose diagrams and descriptions of use cases, which can be considered as patterns representing the DSS functionality, in regard to DW data processing, DW on which DSS are based. We highlight the reusability and automation benefits that this can be achieved, and we think this study can serve as a guide in the development of DSS.

Integrated luminescent chemical microsensors based on GaN LEDs for security applications using smartphones

Development of PCB-integrateable microsensors for monitoring chemical species is a goal in areas such as lab-on-a-chip analytical devices, diagnostics medicine and electronics for hand-held instruments where the device size is a major issue. Cellular phones have pervaded the world inhabitants and their usefulness has dramatically increased with the introduction of smartphones due to a combination of amazing processing power in a confined space, geolocalization and manifold telecommunication features. Therefore, a number of physical and chemical sensors that add value to the terminal for health monitoring, personal safety (at home, at work) and, eventually, national security have started to be developed, capitalizing also on the huge number of circulating cell phones. The chemical sensor-enabled “super” smartphone provides a unique (bio)sensing platform for monitoring airborne or waterborne hazardous chemicals or microorganisms for both single user and crowdsourcing security applications. Some of the latest ones are illustrated by a few examples. Moreover, we have recently achieved for the first time (covalent) functionalization of p- and n-GaN semiconductor surfaces with tuneable luminescent indicator dyes of the Ru-polypyridyl family, as a key step in the development of innovative microsensors for smartphone applications. Chemical “sensoring” of GaN-based blue LED chips with those indicators has also been achieved by plasma treatment of their surface, and the micrometer-sized devices have been tested to monitor O2 in the gas phase to show their full functionality. Novel strategies to enhance the sensor sensitivity such as changing the length and nature of the siloxane buffer layer are discussed in this paper.

Control of a solar dryer through using a fuzzy logic and low-cost model-based sensor

Solar drying is one of the important processes used for extending the shelf life of agricultural products. Regarding consumer requirements, solar drying should be more suitable in terms of curtailing total drying time and preserving product quality. Therefore, the objective of this study was to develop a fuzzy logic-based control system, which performs a ?human-operator-like? control approach through using the previously developed low-cost model-based sensors. Fuzzy logic toolbox of MatLab and Borland C++ Builder tool were utilized to develop a required control system. An experimental solar dryer, constructed by CONA SOLAR (Austria) was used during the development of the control system. Sensirion sensors were used to characterize the drying air at different positions in the dryer, and also the smart sensor SMART-1 was applied to be able to include the rate of wood water extraction into the control system (the difference of absolute humidity of the air between the outlet and the inlet of solar dryer is considered by SMART-1 to be the extracted water). A comprehensive test over a 3 week period for different fuzzy control models has been performed, and data, obtained from these experiments, were analyzed. Findings from this study would suggest that the developed fuzzy logic-based control system is able to tackle difficulties, related to the control of solar dryer process.

A Coreference Service for Enterprise Application Integration using Linked Data

The use of semantic and Linked Data technologies for Enterprise Application Integration (EAI) is increasing in recent years. Linked Data and Semantic Web technologies such as the Resource Description Framework (RDF) data model provide several key advantages over the current de-facto Web Service and XML based integration approaches. The flexibility provided by representing the data in a more versatile RDF model using ontologies enables avoiding complex schema transformations and makes data more accessible using Web standards, preventing the formation of data silos. These three benefits represent an edge for Linked Data-based EAI. However, work still has to be performed so that these technologies can cope with the particularities of the EAI scenarios in different terms, such as data control, ownership, consistency, or accuracy. The first part of the paper provides an introduction to Enterprise Application Integration using Linked Data and the requirements imposed by EAI to Linked Data technologies focusing on one of the problems that arise in this scenario, the coreference problem, and presents a coreference service that supports the use of Linked Data in EAI systems. The proposed solution introduces the use of a context that aggregates a set of related identities and mappings from the identities to different resources that reside in distinct applications and provide different views or aspects of the same entity. A detailed architecture of the Coreference Service is presented explaining how it can be used to manage the contexts, identities, resources, and applications which they relate to. The paper shows how the proposed service can be utilized in an EAI scenario using an example involving a dashboard that integrates data from different systems and the proposed workflow for registering and resolving identities. As most enterprise applications are driven by business processes and involve legacy data, the proposed approach can be easily incorporated into enterprise applications.

Characterization of ICT-based business models of social enterprises

In recent years new models for organizations working on overty alleviation have emerged. One of them, the social enterprise, has attracted the attention of both academics and practitioners all over the world. Even if defined in different ways depending on the context, social enterprise has an enormous potential to generate social benefits and to promote local agency and private initiative in poverty alleviation. In this sense, it is fitting to highlight the importance of identifying the main standards that permit the characterization of diverse social enterprises, in order to understand their main specificities and guarantee value generation for low-income populations. Another crucial factor is understanding innovation as a critical factor in promoting social enterprises. A powerful tool to enhance the impact and application of this model is Information and Communication Technologies. In the 21st century,these tools allow users to find new ways of collaboration, new sustainable business models and a cost-effective way of scaling-up initiatives. This paper, a product of the collaborative research between the Universidad Politécnica de Madrid and the Universidade Federal Fluminense, examines different business models for social enterprises and the role that ICT can play in scale and impact of these initiatives

Intentions: a confident-based interaction design for smart spaces

The paradigm of ubiquitous computing has become a reference for the design of Smart Spaces. Current trends in Ambient Intelligence are increasingly related to the scope of Internet of Things. This paradigm has the potential to support cost-effective solutions in the fields of telecare, e-health and Ambient Assisted Living. Nevertheless, ubiquitous computing does not provide end users with a role for proactive interactions with the environment. Thus, the deployment of smart health care services at a private space like the home is still unsolved. This PhD dissertation aims to define a person-environment interaction model to foster acceptability and users confidence in private spaces by applying the concept of user-centred security and the human performance model of seven stages of action.

LED bulb lamps technical specification and testing procedure for solar home systems.

With the consolidation of the new solid state lighting LEOs devices, te5t1n9 the compliance 01 lamps based on this technology lor Solar Home Systems (SHS) have been analyzed. The definition of the laboratory procedures to be used with final products 15 a necessary step in arder to be able to assure the quality of the lamps prior to be installed [1]. As well as with CFL technology. particular attention has been given to simplicity and technical affordability in arder to facilitate the implementation of the test with basie and simple laboratory too15 even on the same SHS electrification program locations. The block of test procedures has been applied to a set of 14 low-cost lamps. They apply to lamp resistance, reliability and performance under normal, extreme and abnormal operating conditions as a simple but complete quality meter tool 01 any LEO bulb.

Home automation controller for a water-flow window

Facing the EU energy efficiency and legal scenarios related to buildings (2010/31 EU directive), new sustainable advanced concepts for envelopes are required. These innovative designs must be able to offer an elevated level of energy efficiency based on a high performance architecture. According to this, smart glazings, and particularly active water-flow glazings, represent a promising alternative to other solar control glazings, since they can reduce the building energy demand avoiding well known drawbacks as high cost, glare problems and high response time that affect to other smart glazings. This kind of glazing, as any other active one, needs to be operated by a control system. In order to operate a water-flow based window, a new controller based on an inexpensive microcontroller board has been developed