Considerações clínicas em implantes imediatos

The biological principles of osseointegration caused the rehabilitation treatment with osseointegrated implant become a safe, well alternative accepted by the dental community for the high success rate, allowing the preparation of functional and aesthetic prostheses in edentulous and partial patients. We passed the initial phase of functional vision for an aesthetic approach, too, depending on the demands of the patient and the quest for excellence by professionals. Over these last years, implant treatment has undergone many changes in surgical and prosthetic protocols. The less invasive surgical techniques and the development of restorative materials, especially ceramics allow the prosthetic rehabilitation of high functional quality and aesthetics. The installation of implants in sockets immediately after extraction of teeth involved by fracture, periodontal disease, endodontic lesions, is part of the arsenal of techniques for rehabilitating a number of advantages that we get to the outcome of multidisciplinary treatment. For this, we must consider several criteria in its planning as a fundamental unit, adjacent teeth, multiple losses, system, form and number of implants, type of retention of the prosthesis components, the patient expectation of the outcome perspective, gingival biotype, standard of ridge resorption, the smile line, etc. occlusal analysis. With the three-dimensional placement of the implant can immediately join the biological processes of repair of the socket, implant osseointegration, speeding treatment time. Much has been made by companies in the surface treatment of endosseous implants to be osseointegration shortened and restorative procedures started earlier, bringing benefits to the patient and professional. Among the main advantages we can emphasize the preservation of the structures adjacent to the teeth replaced, minor resorption of bone tissue involved... (Complete abstract click electronic access below)

Análise de algoritmos computacionais utilizados em sistemas de planejamento de braquiterapia de alta taxa de dose: estudo comparativo com o Código MCNP-5C

In radiotherapy, computational systems are used for radiation dose determination in the treatment’s volume and radiometric parameters quality analysis of equipment and field irradiated. Due to the increasing technological advancement, several research has been performed in brachytherapy for different computational algorithms development which may be incorporated to treatment planning systems, providing greater accuracy and confidence in the dose calculation. Informatics and information technology fields undergo constant updating and refinement, allowing the use Monte Carlo Method to simulate brachytherapy source dose distribution. The methodology formalization employed to dosimetric analysis is based mainly in the American Association of Physicists in Medicine (AAPM) studies, by Task Group nº 43 (TG-43) and protocols aimed at dosimetry of these radiation sources types. This work aims to analyze the feasibility of using the MCNP-5C (Monte Carlo N-Particle) code to obtain radiometric parameters of brachytherapy sources and so to study the radiation dose variation in the treatment planning. Simulations were performed for the radiation dose variation in the source plan and determined the dosimetric parameters required by TG-43 formalism for the characterization of the two high dose rate iridium-192 sources. The calculated values were compared with the presents in the literature, which were obtained with different Monte Carlo simulations codes. The results showed excellent consistency with the compared codes, enhancing MCNP-5C code the capacity and viability in the sources dosimetry employed in HDR brachytherapy. The method employed may suggest a possible incorporation of this code in the treatment planning systems provided by manufactures together with the equipment, since besides reducing acquisition cost, it can also make the used computational routines more comprehensive, facilitating the brachytherapy ...

Metaloproteinases de matriz 2 e 9 no líquido cefalorraquidiano e soro de cães naturalmente infectados pelo vírus da cinomose

Pós-graduação em Medicina Veterinária - FCAV

A BCH code and a sequence of cyclic codes

This study establishes that for a given binary BCH code C0 n of length n generated by a polynomial g(x) ∈ F2[x] of degree r there exists a family of binary cyclic codes {Cm 2m−1(n+1)n}m≥1 such that for each m ≥ 1, the binary cyclic code Cm 2m−1(n+1)n has length 2m−1(n + 1)n and is generated by a generalized polynomial g(x 1 2m ) ∈ F2[x, 1 2m Z≥0] of degree 2mr. Furthermore, C0 n is embedded in Cm 2m−1(n+1)n and Cm 2m−1(n+1)n is embedded in Cm+1 2m(n+1)n for each m ≥ 1. By a newly proposed algorithm, codewords of the binary BCH code C0 n can be transmitted with high code rate and decoded by the decoder of any member of the family {Cm 2m−1(n+1)n}m≥1 of binary cyclic codes, having the same code rate.

Validação de um instrumento de triagem para identificação de filhos de alcoolistas, aplicável por pessoal não especializado

Pós-graduação em Saúde Coletiva - FMB

Projeto DMAIC com ferramentas Seis Sigma para redução de sucata em uma multinacional do ramo de acessórios automobilísticos

In this era of globalization, with fierce competition in the labor market, using the reduction cost strategy and resources optimization, has become a competitive advantage. In this graduation study, it will be exposed in form of case study the DMAIC project (Define Measure Analyze Improve Control) execution, using of Six Sigma's tools, statistical and quality knowledge, with intent of analyze, improve and control the processes of a selected problem, always demonstrating good practice of methodologies. In an auto parts multinational branch, It was identified a high scrap rate in one of his production lines. This work will study this problem to improve their processes and ensure that these improvements are perpetual. As a result, reached the stipulated goals, increasing Corporation's Intellectual, thereby providing a competitive advantage

Definição de framework para a padronização de processos em um periódico científico com base em revisão da literatura e nos objetivos de desempenho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparative effects of photodynamic therapy mediated by curcumin on standard and clinical isolate of Streptococcus mutans

Aim: The aim of this study was investigate the effect of photodynamic therapy (PDT) using curcumin (C) as a photosensitizing agent irradiated with an LED (L) in the blue wavelength as a light source on a standard and clinical isolate of Streptococcus mutans (S. mutans) in a planktonic suspension model. Materials and methods: Suspensions of both strains were divided into 4 groups as follows: absence of C and L (control group: C–L–), with C and without L (C group: C+L–), absence of C with L (L group: C–L+) and presence of C and L (PDT group: C+L+). Three different concentrations of curcumin (0.75 mg/ml, 1.5 mg/ml and 3 mg/ml) and three light fluences of studied light source (24, 48 and 72 J cm–2) were tested. Aliquots of each studied group was plated in BHI agar and submitted to colony forming units counting (CFU/ml) and the data transformed into logarithmical scale. Results: A high photoinactivation rate of more than 70% was verified to standard S. mutans strain submitted to PDT whereas the clinical isolate showed a lower sensitivity to all the associations of curcumin and LED. A slight bacterial reduction was verified to C+L– and C–L+, demonstrating no toxic effects to the isolated application of light and photosensitizer to both S. mutans strains tested. Conclusion: Photodynamic therapy using a combination of curcumin and blue LED presented a substantial antimicrobial effect on S. mutans standard strain in a planktonic suspension model with a less pronounced effect on its clinical isolate counterparts due to resistance to this alternative approach. Clinical significance: Alternative antimicrobial approaches, as photodynamic therapy, should be encouraged due to optimal results against cariogenic bacteria aiming to prevent or treat dental caries.

Análise metalográfica do titânio puro submetido à soldagem laser Nd: YAG e TIG

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Obtenção de anticorpos monoclonais murinos contra antígenos de Staphylococcus aureus resistentes à meticilina por imunização subtrativa

Pós-graduação em Pesquisa e Desenvolvimento (Biotecnologia Médica) - FMB

Análise da frequencia do polimorfismo rs12979860 C/T no gene IL28B em pacientes acometidos por câncer gástrico

Pós-graduação em Pesquisa e Desenvolvimento (Biotecnologia Médica) - FMB

Aperfeiçoamento em equipamento para digestão de amostras por via úmida

Aperfeiçoamento em equipamento para digestão de amostras por via úmida. É descrito um aperfeiçoamento em equipamento para digestão de amostras por via úmida que emprega tubos de digestão (20) fechados não encapsulados e aquecimento condutivo que possibilita a rápida decomposição de amostras botânicas, alimentícias, clínicas, ambientais e similares, promovendo um gradiente de temperatura em direção à parte superior do tubo de digestão, permitindo que a temperatura da fase gasosa seja inferior à da fase líquida, de forma que as digestões são realizadas à pressão pouco elevada e, consequentemente, os tubos de digestão utilizados podem ter paredes menos espessas, permitindo o rápido aquecimento e resfriamento das amostras, bem como baixo custo de operação e manutenção, simplicidade, alta frequência analítica,; redução do consumo de reagentes e diminuição da geração de resíduos, dito equipamento provido de um gabinete (10) que evita a contaminação da atmosfera do laboratório por vapores ácidos e a perda dos componentes voláteis da amostra durante o aquecimento

Low serum potassium levels increase the infectious-caused mortality in peritoneal dialysis patients: a propensity-matched score study

Background and ObjectivesHypokalemia has been consistently associated with high mortality rate in peritoneal dialysis. However, studies investigating if hypokalemia is acting as a surrogate marker of comorbidities or has a direct effect in the risk for mortality have not been studied. Thus, the aim of this study was to analyze the effect of hypokalemia on overall and cause-specific mortality.Design, Setting, Participants and MeasurementsThis is an analysis of BRAZPD II, a nationwide prospective cohort study. All patients on PD for longer than 90 days with measured serum potassium levels were used to verify the association of hypokalemia with overall and cause-specific mortality using a propensity match score to reduce selection bias. In addition, competing risks were also taken into account for the analysis of cause-specific mortality.ResultsThere was a U-shaped relationship between time-averaged serum potassium and all-cause mortality of PD patients. Cardiovascular disease was the main cause of death in the normokalemic group with 133 events (41.8%) followed by PD-non related infections, n=105 (33.0%). Hypokalemia was associated with a 49% increased risk for CV mortality after adjustments for covariates and the presence of competing risks (SHR 1.49; CI95% 1.01-2.21). In contrast, in the group of patients with K < 3.5mEq/L, PD-non related infections were the main cause of death with 43 events (44.3%) followed by cardiovascular disease (n=36; 37.1%). For PD-non related infections the SHR was 2.19 (CI95% 1.52-3.14) while for peritonitis was SHR 1.09 (CI95% 0.47-2.49).ConclusionsHypokalemia had a significant impact on overall, cardiovascular and infectious mortality even after adjustments for competing risks. The causative nature of this association suggested by our study raises the need for intervention studies looking at the effect of potassium supplementation on clinical outcomes of PD patients.

Maxillary sinus lift without grafting, and simultaneous implant placement: a prospective clinical study with a 51-month follow-up

A prospective clinical study of maxillary sinus lift procedures in the posterior region of the maxilla, using only blood clot as filling material, was conducted. Seventeen patients underwent a maxillary sinus lift procedure; 20 maxillary sinus regions were operated on and a total of 25 implants were placed. The sinus mucosa was lifted together with the anterior wall of the osteotomized maxilla and supported by the implants placed. Computed tomography (CT) scans were obtained immediately postoperative (T-initial) and at 3 (T-1) and 51(T-2) months postoperative for the measurement of linear bone height and bone density (by grey tones). Only one implant was lost in the first stage (96% success). After dental prosthesis placement and during up to 51 months of follow-up, no implant was lost (100% success, second stage). The difference in mean bone height between T-initial (5.94 mm) and T-1 (13.14 mm), and between T-initial and T-2 (11.57 mm), was statistically significant (both P < 0.001); comparison between T-1 and T-2 also presented a statistical difference (P < 0.001). Bone density had increased at the end of the period analyzed, but this was not statistically significant (P > 0.05). Thus, the maxillary sinus lift technique with immediate implant placement, filling with blood clot only, may be performed with a high success rate.

Nanotechnology-based drug delivery systems for melanoma antitumoral therapy: a review

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)