TEST

Der Müller und die fünf Räuber, Überfall²³

The use of direct boundary element method for gaining insight into complex seismic site response

The boundary element method is specially well suited for the analysis of the seismic response of valleys of complicated topography and stratigraphy. In this paper the method’s capabilities are illustrated using as an example an irregularity stratified (test site) sedimentary basin that has been modelled using 2D discretization and the Direct Boundary Element Method (DBEM). Site models displaying different levels of complexity are used in practice. The multi-layered model’s seismic response shows generally good agreement with observed data amplification levels, fundamental frequencies and the high spatial variability. Still important features such as the location of high frequencies peaks are missing. Even 2D simplified models reveal important characteristics of the wave field that 1D modelling does not show up.

The direct boundary element method: 2D site effects assessment on laterally varying layered media (methodology)

The Direct Boundary Element Method (DBEM) is presented to solve the elastodynamic field equations in 2D, and a complete comprehensive implementation is given. The DBEM is a useful approach to obtain reliable numerical estimates of site effects on seismic ground motion due to irregular geological configurations, both of layering and topography. The method is based on the discretization of the classical Somigliana's elastodynamic representation equation which stems from the reciprocity theorem. This equation is given in terms of the Green's function which is the full-space harmonic steady-state fundamental solution. The formulation permits the treatment of viscoelastic media, therefore site models with intrinsic attenuation can be examined. By means of this approach, the calculation of 2D scattering of seismic waves, due to the incidence of P and SV waves on irregular topographical profiles is performed. Sites such as, canyons, mountains and valleys in irregular multilayered media are computed to test the technique. The obtained transfer functions show excellent agreement with already published results.

Influence of loudspeaker directivity and measurement geometry on direct acoustic levels over façades for acoustic insulation tests with the International Standard ISO 140-5

The International Standard ISO 140-5 on field measurements of airborne sound insulation of façades establishes that the directivity of the measurement loudspeaker should be such that the variation in the local direct sound pressure level (ΔSPL) on the sample is ΔSPL < 5 dB (or ΔSPL < 10 dB for large façades). This condition is usually not very easy to accomplish nor is it easy to verify whether the loudspeaker produces such a uniform level. Direct sound pressure levels on the ISO standard façade essentially depend on the distance and directivity of the loudspeaker used. This paper presents a comprehensive analysis of the test geometry for measuring sound insulation and explains how the loudspeaker directivity, combined with distance, affects the acoustic level distribution on the façade. The first sections of the paper are focused on analysing the measurement geometry and its influence on the direct acoustic level variations on the façade. The most favourable and least favourable positions to minimise these direct acoustic level differences are found, and the angles covered by the façade in the reference system of the loudspeaker are also determined. Then, the maximum dimensions of the façade that meet the conditions of the ISO 140-5 standard are obtained for the ideal omnidirectional sound source and the piston radiating in an infinite baffle, which is chosen as the typical radiation pattern for loudspeakers. Finally, a complete study of the behaviour of different loudspeaker radiation models (such as those usually utilised in the ISO 140-5 measurements) is performed, comparing their radiation maps on the façade for searching their maximum dimensions and the most appropriate radiation configurations.

Two-dimensional direct rainfall hydraulic models applied to direct calculation of hydrologic events in dams to prevent overtopping

One of the main concerns when conducting a dam test is the acute determination of the hydrograph for a specific flood event. The use of 2D direct rainfall hydraulic mathematical models on a finite elements mesh, combined with the efficiency of vector calculus that provides CUDA (Compute Unified Device Architecture) technology, enables nowadays the simulation of complex hydrological models without the need for terrain subbasin and transit splitting (as in HEC-HMS). Both the Spanish PNOA (National Plan of Aereal Orthophotography) Digital Terrain Model GRID with a 5 x 5 m accuracy and the CORINE GIS Land Cover (Coordination of INformation of the Environment) that allows assessment of the ground roughness, provide enough data to easily build these kind of models

Ca2+/calmodulin-binding peptides block phototransduction in Limulus ventral photoreceptors: Evidence for direct inhibition of phospholipase C

Phototransduction in Limulus photoreceptors involves a G protein-mediated activation of phospholipase C (PLC) and subsequent steps involving InsP3-mediated release of intracellular Ca2+. While exploring the role of calmodulin in this cascade, we found that intracellular injection of Ca2+/calmodulin-binding peptides (CCBPs) strongly inhibited the light response. By chemically exciting the cascade at various stages, we found the primary target of this effect was not in late stages of the cascade but rather at the level of G protein and PLC. That PLCδ1 contains a calmodulin-like structure raised the possibility that PLC might be directly affected by CCBPs. To test this possibility, in vitro experiments were conducted on purified PLC. The activity of this enzyme was strongly inhibited by CCBPs and also inhibited by calmodulin itself. Our results suggest that the calmodulin-like region of PLC has an important role in regulating this enzyme.

Organizational, direct support and general support maintenance repair parts and special tools list including depot maintenance repair parts and special tools guided missile system, intercept-aerial M41 1425-00-930-9923 shipping and storage containers, guided missile M571 and M585 8140-00-937-1340 and 8140-00-880-7285 guided missile system, ....

Includes index.

Genetic assignment methods for the direct, real-time estimation of migration rate: a simulation-based exploration of accuracy and power

Genetic assignment methods use genotype likelihoods to draw inference about where individuals were or were not born, potentially allowing direct, real-time estimates of dispersal. We used simulated data sets to test the power and accuracy of Monte Carlo resampling methods in generating statistical thresholds for identifying F-0 immigrants in populations with ongoing gene flow, and hence for providing direct, real-time estimates of migration rates. The identification of accurate critical values required that resampling methods preserved the linkage disequilibrium deriving from recent generations of immigrants and reflected the sampling variance present in the data set being analysed. A novel Monte Carlo resampling method taking into account these aspects was proposed and its efficiency was evaluated. Power and error were relatively insensitive to the frequency assumed for missing alleles. Power to identify F-0 immigrants was improved by using large sample size (up to about 50 individuals) and by sampling all populations from which migrants may have originated. A combination of plotting genotype likelihoods and calculating mean genotype likelihood ratios (D-LR) appeared to be an effective way to predict whether F-0 immigrants could be identified for a particular pair of populations using a given set of markers.

Is the method of signal analysis and test selection important for measuring standing balance in subjects with persistent whiplash?

Dizziness and or unsteadiness, associated with episodes of loss of balance, are frequent complaints in those suffering from persistent problems following a whiplash injury. Research has been inconclusive with respect to possible aetiology, discriminative tests and analyses used. The aim of this pilot research was to identify the test conditions and the most appropriate method for the analysis of sway that may differentiate subjects with persistent whiplash associated disorders (WAD) from healthy controls. The six conditions of the Clinical Test for Sensory Interaction in Balance was performed in both comfortable and tandem stance in 20 subjects with persistent WAD compared to 20 control subjects. The analyses were carried out using a traditional method of measurement, total sway distance, to results obtained from the use of wavelet analysis. Subjects with WAD were significantly less able to complete the tandem stance tests on a firm surface than controls. In comfortable stance, using wavelet analysis, significant differences between subjects with WAD and the control group were evident in total energy of the trace for all test conditions apart from eyes open on the firm surface. In contrast, the results of the analysis using total sway distance revealed no significant differences between groups across all six conditions. Wavelet analysis may be more appropriate for detecting disturbances in balance in whiplash subjects because the technique allows separation of the noise from the underlying systematic effect of sway. These findings will be used to direct future studies on the aeitiology of balance disturbances in WAD. (c) 2004 Elsevier B.V. All rights reserved.

SeqDoC: rapid SNP and mutation detection by direct comparison of DNA sequence chromatograms

Background: This paper describes SeqDoC, a simple, web-based tool to carry out direct comparison of ABI sequence chromatograms. This allows the rapid identification of single nucleotide polymorphisms (SNPs) and point mutations without the need to install or learn more complicated analysis software. Results: SeqDoC produces a subtracted trace showing differences between a reference and test chromatogram, and is optimised to emphasise those characteristic of single base changes. It automatically aligns sequences, and produces straightforward graphical output. The use of direct comparison of the sequence chromatograms means that artefacts introduced by automatic base-calling software are avoided. Homozygous and heterozygous substitutions and insertion/deletion events are all readily identified. SeqDoC successfully highlights nucleotide changes missed by the Staden package 'tracediff' program. Conclusion: SeqDoC is ideal for small-scale SNP identification, for identification of changes in random mutagenesis screens, and for verification of PCR amplification fidelity. Differences are highlighted, not interpreted, allowing the investigator to make the ultimate decision on the nature of the change.

Charitable giving: A test of a revised Theory of Planned Behaviour model

Recent world events aside, downward trends in donating behaviour in Australia have increased the need for research into the factors that inhibit and encourage charitable giving. A revised Theory of Planned Behaviour (TPB) model was used to determine the influence of attitudes, norms (injunctive, descriptive, and moral norms), perceived behavioural control (PBC), and past behaviour (PB) on intentions to donate money to charities and community service organisations. Respondents (N=186) completed a questionnaire assessing the constructs of the revised TPB model. Four weeks later, self-reported donating behaviour was assessed (n=65). Results showed support for the revised TPB model. Attitudes, PBC, injunctive norms, moral norms, and PB all predicted donating intentions. Descriptive norms did not predict intentions. Intention was the only significant predictor of selfreported behaviour four weeks later, with neither PBC nor PB having a direct effect on behaviour. Theoretical and applied implications of the results are discussed.

Modelling foreign direct investment in China

This thesis consists of three empirical and one theoretical studies. While China has received an increasing amount of foreign direct investment (FDI) and become the second largest host country for FDI in recent years, the absence of comprehensive studies on FDI inflows into this country drives this research. In the first study, an econometric model is developed to analyse the economic, political, cultural and geographic determinants of both pledged and realised FDI in China. The results of this study suggest that China's relatively cheaper labour force, high degree of international integration with the outside world (represented by its exports and imports) and bilateral exchange rates are the important economic determinants of both pledged FDI and realised FDI in China. The second study analyses the regional distribution of both pledged and realised FDI within China. The econometric properties of the panel data set are examined using a standardised 't-bar' test. The empirical results indicate that provinces with higher level of international trade, lower wage rates, more R&D manpower, more preferential policies and closer ethnic links with overseas Chinese attract relatively more FDI. The third study constructs a dynamic equilibrium model to study the interactions among FDI, knowledge spillovers and long run economic growth in a developing country. The ideas of endogenous product cycles and trade-related international knowledge spillovers are modified and extended to FDI. The major conclusion is that, in the presence of FDI, economic growth is determined by the stock of human capital, the subjective discount rate and knowledge gap, while unskilled labour can not sustain growth. In the fourth study, the role of FDI in the growth process of the Chinese economy is investigated by using a panel of data for 27 provinces across China between 1986 and 1995. In addition to FDI, domestic R&D expenditure, international trade and human capital are added to the standard convergence regressions to control for different structural characteristics in each province. The empirical results support endogenous innovation growth theory in which regional per capita income can converge given technological diffusion, transfer and imitation.

On the search for spillovers from foreign direct investment (FDI) with spatial dependency

This paper examines various specifications that are used within the literature to test for spillovers from foreign direct investment (FDI). Analysis provides significant evidence of externalities from inward FDI, but it shows that these externalities are more localized than has previously been believed. Further, the results demonstrate that the econometric treatment of issues such as agglomeration, contiguity and spatial dependence significantly changes the conclusions regarding local and national spillovers from FDI, and productivity growth more generally.

The causal relationship between information and communication technology and foreign direct investment

This paper investigates the simultaneous causal relationship between investments in information and communication technology (ICT) and flows of foreign direct investment (FDI), with reference to its implications on economic growth. For the empirical analysis we use data from 23 major countries with heterogeneous economic development for the period 1976-99. Our causality test results suggest that there is a causal relationship from ICT to FDI in developed countries, which means that a higher level of ICT investment leads to an increase inflow of FDI. ICT may contribute to economic growth indirectly by attracting more FDI. Contrarily, we could not find significant causality from ICT to FDI in developing countries. Instead, we have partial evidence of opposite causality relationship: the inflow of FDI causes further increases in ICT investment and production capacity. © United Nations University 2006.

Does the motivation for foreign direct investment affect productivity spillovers to the domestic sector?

There is increasing empirical and theoretical evidence that foreign direct investment (FDI) may be motivated not by the desire to exploit some competitive advantage possessed by multinationals, but to access the technology of host economy firms. Using a panel of FDI flows across OECD countries and manufacturing sectors between 1984 and 1995, we test whether these contrasting motivations influence the effects that FDI has on domestic total factor productivity. The distinction between technology-exploiting FDI (TEFDI) and technology-sourcing FDI (TSFDI) is made using R&D intensity differentials between host and source sectors. The hypothesis that the motivation for FDI has an effect on total factor productivity spillovers is supported: TEFDI has a net positive effect, while TSFDI has a net negative effect. These net effects are explained in terms of the offsetting influences of productivity spillovers and market stealing effects induced by incoming multinationals.