Erosão em taludes de corte: métodos de proteção e estabilização

This work addresses the erosion caused by rain, describing their steps and factors that most influence the intensity and volume of transported material. The work presents the Universal Soil Loss Equation that quantifies the erosion, with the influence of different factors that affect it. The following notes the occurrence of this process in cutting slopes. They suffer with removal of the vegetation and surface soil layer, making them even more susceptible to this process. In this way it's necessary a protection model for the slopes. Some protection methods are presents with their main features, advantages and disadvantages, implementation process, especially to survey the approximate cost of each method and their application restrictions

Metas de inflação no Brasil (1999-2012): uma análise institucional

The paper shows the advantages and handicaps of implementing an inflation target (IT) regime, from post-keynesian and institutional stances. It is post-keynesian as long as it does not perceive any benefit in the mainstream split between monetary and fiscal policies. And it is institutional insofar as it shows there are several ways of implementing a policy, such that the chosen one is determined by historical factors, as illustrated by the Brazilian case. Thus, one could even support IT policies if their targets were seen just as “focusing devices” guiding economic policies, but also regarding with due attention other targets, as, in the short run, output growth and employment and, in the long run, technology and human development. Therefore, an IT is not necessary, although it can be admitted, mainly if the target is hidden from the public, in order to increase the flexibility of the central bank.

Implementing inflation targeting in Brazil: an institutional analysis

The paper shows the advantages and handicaps of implementing an inflation target (IT) regime, from a Post-Keynesian and, thus, an institutional stance. It is Post-Keynesian as long as it does not perceive any benefit in the mainstream split between monetary and fiscal policies. And it is institutional insofar as it assumes that there are several ways of implementing a policy, such that the chosen one is determined by historical factors, as it is illustrated by the Brazilian case. One could even support IT policies if their targets were seen just as “focusing devices” guiding economic policy, notwithstanding other targets, as, in the short run, output growth and employment and, in the long run, technology and human development. Nevertheless, an IT is not necessary, although it can be admitted, mainly if the target is hidden from the public, in order to increase the flexibility of the Central Bank.

Concepções sobre escola e gênero na perspectiva de crianças abrigadas

School and family are critical contexts to the development of concepts in childhood and few studies are conducted from the report of children when they live in rest-home. The aim of this study was to investigate concepts that children in rest-homes have about school and gender. There were 22 participants, including boys and girls, between 4 and 6 years, who were interviewed with open questions for content analysis. For these children the school was associated with an area of study opportunities, favorable to themselves, although by necessity or obligation, and possibly with the presence of conflicts. The gender was described from biological and psychosocial aspects and children attributed their gender identity at destination, learning and social advantages. Children feel they belong to a gender in a positive way, although by attributing disadvantages to the opposite gender, for example, relating male aggression to violence. Children reproduce some patterns and social characteristics of gender that probably were learned in different contexts. We conclude that studies in this area are important to identify children´s conceptions about school and sexuality, their roles and representations, especially when they live in an environment with such specific features as a rest-home.

Herbst esplinte metálico fundido: novo modelo de confecção com Duralay

A má oclusão de Classe II é originária de vários fatores etiológicos e uma das características mais comum desta má oclusão é a retrusão mandibular3, por esse motivo, os aparelhos de avanço mandibular são eleitos para o tratamento e correção desta má oclusão. Um destes aparelhos é o Herbst, que apresenta várias formas de ancoragens na sua confecção10. Tradicionalmente, as bandas eram o sistema de ancoragem mais usado, no entanto, pela alta frequência de quebras as mesmas foram substituídas por esplinte metálico12. Esse aparelho quando confeccionado de cromo cobalto pelo método da prótese parcial removível, apresenta como desvantagens a quantidade de passos laboratoriais e a possível contração do metal, podendo ocasionar a má adaptação da estrutura metálica à boca do paciente. Dessa forma, este artigo apresenta um novo método de confecção do aparelho de Herbst esplinte metálico fundido com uso da Duralay e liga níquel cromo. Esse método diminui os passos laboratoriais, proporciona maior resistência à tração e minimiza a contração da estrutura metálica, pois a resina química Duralay proporciona menor expansão do que a cera2.

O uso do beta-tricálcio fosfato como substituto ósseo em odontologia

The correction of bone defects is the restoration of lost structures which can be replaced by alloplastic implants or bone grafts. Due to the known disadvantages of removal of autogenous grafts, most researches in dentistry aim to develop alloplastic or non-alloplastic materials able to replace bone without these limitations. Beta-Tricalcium Phosphate (β-TCP) is a synthetic granular bone substitute, biocompatible, osteoconductive, which can be used in the alveolar reconstruction. In this work, we perform a literature review on the β-TCP characteristics and discuss its application in dentistry.

Considerações gerais sobre prótese fixa adesiva

The success rate of resin-bonded fixed partial dentures is directly related to the adhesive system and the tooth preparation design for good retention. These resin-bonded bridges represent a prosthodontic alternative, based on their costeffectiveness, conservative techniques, and ease of laboratory manufacturing. Through a thorough review of the literature, this study aimed to report on cavity designs, types of materials used, and the advantages and disadvantages of the resin-bonded fixed partial denture. One of significant advantages of the resin-bonded fixed partial dentures is the conservation of the tooth structure, whereas its main disadvantage includes aesthetic limitations, given that the alloy may in fact be visible. Preparation design, cement type, and casting alloy type, as well as surface treatment, are among the factors that influence the longevity of resin-bonded fixed partial dentures. Treatments with resin-bonded fixed partial dentures present a bright outlook regarding the conservation of tooth structures, as well as a high level of success.

Informatização do consultório odontológico

Dental software allow for a practical management of clinical and administrative tasks of the dental office. The aim of this study was to correlate different software (ProDent, Is-Odonto, ExDental, DentalPro, Dental Office, Dental Clinic, Dentalis, EasyDental), through research in specialized sites on the internet, enumerating their advantages and disadvantages. Due to the variety of software in the market, the dentist should be aware of some aspects such as: friendliness of use, presence of a calendar base and administrative controls, storage of treatments and images, broader coverage of the dentist competency, direct contact with software developers, and the pertinent ethical issues.

Scientific use of the finite element method in Orthodontics

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

O uso das TICs em sala de aula: a voz dos professores das escolas públicas do Estado de São Paulo

Pós-graduação em Educação Escolar - FCLAR

Despacho ótimo de potências ativa e reativa de sistema elétricos multi-áreas considerando restrições físicas, econômicas e ambientais =: Envronmentally constrained active-reactive optimal power flow-a compromising strategy for economic-emission dispatch and a multi-area paradigm

Pós-graduação em Engenharia Elétrica - FEIS

Estudo do ultrassom de potência no pré-tratamento do material lignocelulósico de resíduos da bananeira

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação do efeito osteoindutivo do PDGF-BB associado a diferentes carreadores na regeneração óssea em cavidades cirurgicamente criadas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Pré tratamento dentinário influência do condicionamento ácido, irradiação laser e hipermineralização na resistência ao cisalhamento de sistema adesivo multi uso

The disadvantages generated by the acid etching of the dentin, such as an increase in its permeability, in the surface moisture and in the potential to denature the external dentinal collagen, the formation of a fragility zone and the citotoxicity of the adhesive monomers; which are all aggravated by the depth of the dentin, have stimulated new and different treatment philosophies of the dentin. The purpose of the present study, therefore, was to investigate the effects of three dentin treatments: laser irradiation, acid etching and hypermineralization, in the shear bond strength of the SMP Plus bonding system. Sixty bovine incisors were extracted and randomly selected immediatly alter the animal's death. They were kept frozen (-18°C) for no longer than 14 days. After buccal dentinal surface had been exposed, X-Rays were taken to control the dentin thickness. The specimens were separated into two groups: (1) Control, kept in distilled water at 4ºC; (2) Mineralized, kept in hypermineralized solution at 4°C for 14 days. Each group was divided into three sub-groups according to the type of dentin treatment used: group F - followed the manufacturer instructions (acid-etching + primer + bond), group AL (acid-etching + primer + bond + laser) and group LA (laser + (laser + acid-etching + primer + bond). A composite resin standard cylinder (Z100-3M) was bond to the dentinal surface and the shear bond strength performed on a Universal lnstron machine 4301, with 500 Kg load and at 0,5mm/min. speed. The analysis of variance (ANOVA) determined that the treatments influenced the shear bond strength values (p<0,05) with the following average shearing load at failure: AL (9,96 MPa), F (7,28MPa) e LA (4,87 MPa). The interaction between the two factors analyzed Group (control and mineralized) and treatment (F, AL, LA) also influenced the shear bond strength (p<0,05). The highest values were obtained...

Avaliação dos dados obtidos em um programa de esterilização cirúrgica de gatos em Araçatuba, SP no período de 1996 a 2010

Cats are gradually occupying a more important position as pets and this preference is a result of how easy cat maintenance in an urban environment is, even though they are very prolific and need surgical sterilization. This paper aims at evaluating obtained data within 15 years of research in a university service program that offers free cats sterilization surgery. We carried out a statistical analysis of data shown in the records of animals treated by the program. Surgical sterilization was performed on 647 animals (409 females – 63% and 238 males – 37%). Unilateral cryptorchidism was observed in 9 (3.8%) male cats. Forty (10%) female cats were pregnant at the time of the surgery and the treatment with contraceptives was observed in 67 (16.4%) female cats. One death occurred during anesthesia recovery and 2 cats were euthanized because of wound infection, totalizing an amount of 0.5% of severe complications. From 1996 to 2004, 212 female cats were spayed (122 adults and 90 prepubertal) and during that time two different approaches for ovariohysterectomy were compared: flank laparotomy and ventral midline celiotomy. The flank laparotomy approach was used in only 46 female cats (21.7%) due to some disadvantages observed – the need of an incision on each flank in prepubertal or nulliparous animals and the difficulty or impossibility of total uterus removal. In the same period, 105 male cats underwent orchiectomy via an open technique in which the spermatic cord was linked with nylon thread. From 2005 to 2010, 197 females (106 adults and 91 prepubertal) were spayed. The minilaparotomy technique was used to perform ovariohysterectomy on 139 female cats (70.6%). In this procedure, ovaries and uterus were exteriorized in a blind fashion with a hook through a small midline incision. The traditional midline ovariohysterectomy, which incision length permits direct visualization of the ovaries and uterus, had to be performed in 58 (29.4%) female cats due to advanced pregnancy, full urinary bladder during surgery or obesity. Over the past 6 years, 133 male cats (48 adults and 85 prepubertal) were castrated by means of an open technique in which the spermatic cord was tied to itself. The demand for surgeries during the project demonstrated that people are becoming aware concerning the importance of sterilization when facing cat overpopulation and abandonment.